Concentration and sources of persistent organic pollutants within the vicinity of a scrap-iron smelting plant: Seasonal pattern and health risk assessment.

Polychlorinated biphenyls (PCBs) are a class of ubiquitous and significant synthetic organic chemicals that pose deleterious threats to the environment and human health. This study examined the concentration, indoor-outdoor and seasonal change, sources, and health effects of PCBs in particulate-bound dust near a scrap iron recycling plant. PCBs levels were determined in samples using gas chromatograph mass spectrometer. The results indicated that 5 Cl atoms PCB constituted the majority of PCBs (41% overall), contributing 43% during the rainy season and 39% during the dry season. Dioxin-like PCBs (DLPCBs) contributed 38% during the rainy season and 33% during the dry season. In addition, DLPCB accounted for 26% and 40% of indoor and outdoor PCB emissions, respectively. Iron and steel production were identified as the highest identified contributing sources, accounting for 76% of PCB emissions in the rainy season, while plastic combustion had the highest contribution in the dry season, accounting for 44% of PCB emissions. Incremental Lifetime Cancer Risk assessment showed ingestion as the main exposure pathway for children and adults during the two seasons (74.42% and 58.24%, respectively), followed by dermal exposure, while inhalation had the least contribution. A multifaced approach involving relevant agencies, the industry, and the community is required to reduce exposure.

Quantifications and predictions of sectoral pollutants emissions in Nigeria from 1980 to 2050.

The fast-economic development and population growth in Nigeria have resulted in huge quantities of air pollutants emission which have implications on the environment. Detailed sectoral emission inventory to serve as the basis for policy formation to mitigate the condition is still lacking. This study builds detailed sectoral emission inventory using the emission factor approach to estimates various pollutant emissions from different sources. Five major sources of pollutant emissions were identified which include transportation, energy, municipal solid waste, wood fuel, and agricultural sectors. An increasing trend in emissions from 1980 to 2020 was observed for total emission of CO, NOx, PM2.5, PM10, SO2, NH3 and NMVOC in Nigeria that increased from 1 736-6 210; 143-338; 126-551; 171-717; 19-60; 4-28; and 471-1 587 Gg, respectively. Wood fuel, transportation, and municipal waste sectors are the major sources that contributed to 63%, 16%, and 15% of the total CO emission. Three mitigation scenarios for emission reduction for the future were analyzed. CO emission reductions of 38%, 24%, and 38% will be obtained from the liquefied petroleum gas (LPG) intervention, waste to energy (WTE) technology, and vehicle inspection and maintenance (VIM) policy scenarios, respectively, through to the year 2050.

Polycyclic aromatic hydrocarbons in road dusts of a densely populated African city: spatial and seasonal distribution, source, and risk assessment.

Road dust is a principal source and depository of polycyclic aromatic hydrocarbons (PAHs) in many urban areas of the world. Hence, this study probed the spatial and seasonal pattern, sources, and related cancer health risks of PAHs in the road dusts sampled at ten traffic intersection (TIs) of a model African city. Mixed PAHs sources were ascertained using the diagnostic ratios and positive matrix factorization (PMF) model. The results showed fluctuations in mean concentrations from 36.51 to 43.04 µg/g. Three-ring PAHs were the most abundant PAHs with anthracene (Anth) ranging from 6.84 ± 1.99 to 9.26 ± 4.42 µg/g being the predominant pollutant in Ibadan. Benzo(k)Fluoranthene (BkF) which is a pointer of traffic emission was the most dominant among the seven carcinogenic PAHs considered, varying from 2.68 ± 0.43 to 4.59 ± 0.48 µg/g. Seasonal variation results showed that PAH concentrations were 20% higher during dry season than rainy season. The seven sources of PAHs identified by PMF model include the following: diesel vehicle exhausts, gasoline combustion, diesel combustion, coal tar combustion, gasoline vehicle exhausts, coal and wood (biomass) combustion, and emissions from unburnt fossil fuels. Employing the incremental lifetime cancer risk (ILCR) model, the city's cancer risk of 5.96E-05 for children and 6.60E-05 for adults were more than the satisfactory risk baseline of ILCR ≤ 10-6 and higher in adults than in Children.

Indoor transmission dynamics of expired SARS-CoV-2 virus in a model African hospital ward.

Cough and sneeze droplets' interactions with indoor air of a typical hospital clinic that could be majorly found in developing African countries were studied to investigate the effectiveness of existing guidelines/protocols being adopted in the control of the widespread coronavirus disease (COVID-19) transmission. The influences of indoor air velocity, the type, size distribution, residence time in air, and trajectory of the droplets, were all considered while interrogating the effectiveness of physical distancing measures, the use of face covers, cautionary activities of the general public, and the plausibility of community spread of the SARS-CoV-2 virus through airborne transmission. Series of 3-D, coupled, discrete phase models (DPM) were implemented in the numerical studies. Based on DPM concentration maps as function of particle positions and particle residence times that were observed under different droplets release conditions, the virus-laden droplets could travel several meters away from the source of release (index patient), with smaller-sized particles staying longer in the air. The behavior of indoor air was also found to indicate complex dynamics as particle transports showed no linear dependence on air velocity. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s40201-020-00606-5.

Evaporation rates and pollutants emission from heated cooking oils and influencing factors.

The heating of edible oils during cooking activities promotes the emissions of pollutants that have adverse impacts on the health of humans. This study investigated the evaporative emissions of fifteen (15) commonly used cooking oils. Split-plot experimental design under the response surface methodology framework was used to study singular and interaction effects of influencing parameters (temperature, volume of cooking oil and time) on cooking oil evaporation rate and pollutants emissions (i.e. Particulate matter of aerodynamic diameter ≤1 µm (PM1.0); ≤2.5 µm (PM2.5); ≤10 µm (PM10); Total Suspended Particulate (TSP); Total Volatile Organic Compounds -TVOCs, and Carbon Monoxide- CO) on a groundnut oil sample that served as a case study. Obtained values of density, viscosity, kinematic viscosity, smoke, flash and fire points were; 873-917 kg/m3; 1.12-9.7 kg/ms; 2.4-3.4 m2/s; 96 -100 °C; 124-179 °C and 142-186 °C, respectively. The role of temperature as the most significant parameter influencing the rate of evaporative emissions was established. Evaporation rate and pollutants emission from unrefined samples were the highest. The restricted maximum likelihood (REML) analysis results suggested a strong relationship between the actual values and the predicted values as R-squared values obtained were greater than 0.8 for all the responses. These results suggest that minimal rates of evaporation and pollutants emission from heating cooking oils can be achieved with a high volume of the cooking oil at moderate temperature levels.

Particulate matter concentration levels during intense haze event in an urban environment.

This study assessed concentration levels of particulate matter (PM) in the ambient environment of Ilorin metropolis, Nigeria, during haze episodes. Meteorological data (wind speed and direction, rainfall data, sunshine data, relative humidity and temperature) were obtained. Aerocet 531S particle counter (MetOne Instruments, USA) was used to measure four mass concentration ranges of PM (PM1.0, PM2.5, PM10 and the total suspended particles (TSP)) in 10 locations taking into consideration land use patterns. Surfer® version 8 (Golden Software LLC, USA) was used to model the spatial variation of particulate matter concentration levels using kriging interpolation griding method. Human exposure assessment was done using the total respiratory deposition dose (TRDD) estimates and statutory limit breach (SLB) approaches. The appearance of dominating weak southern atmospheric wind flow was observed as wind speed ranged from 0 to 6.811 m/s while solar radiation periods ranged from 0.3 to 3.5 h/day. The relative humidity of the metropolis ranged between 28 and 57%, while daily temperature was 15 to 36 °C. Highest concentration levels of PM measured were 73.4, 562.7, 7066.3 and 9907.8 µg/m3 for PM1.0, PM2.5, PM10 and TSP, respectively. Very strong negative correlations existed between the PM concentration levels and microclimatic parameters. Spatial variation of the concentration level as modelled using Surfer® version 8 indicated that particulate concentration level increases from south to north. Concentration levels of PM for the 24-h averaging period were generally above the 24-h threshold limit value set by the regulatory agencies for all the locations.