Systematic literature review on the application of machine learning for the prediction of properties of different types of concrete.

Background: Concrete, a fundamental construction material, stands as a significant consumer of virgin resources, including sand, gravel, crushed stone, and fresh water. It exerts an immense demand, accounting for approximately 1.6 billion metric tons of Portland and modified Portland cement annually. Moreover, addressing extreme conditions with exceptionally nonlinear behavior necessitates a laborious calibration procedure in structural analysis and design methodologies. These methods are also difficult to execute in practice. To reduce time and effort, ML might be a viable option. Material and Methods: A set of keywords are designed to perform the search PubMed search engine with filters to not search the studies below the year 2015. Furthermore, using PRISMA guidelines, studies were selected and after screening, a total of 42 studies were summarized. The PRISMA guidelines provide a structured framework to ensure transparency, accuracy, and completeness in reporting the methods and results of systematic reviews and meta-analyses. The ability to methodically and accurately connect disparate parts of the literature is often lacking in review research. Some of the trickiest parts of original research include knowledge mapping, co-citation, and co-occurrence. Using this data, we were able to determine which locations were most active in researching machine learning applications for concrete, where the most influential authors were in terms of both output and citations and which articles garnered the most citations overall. Conclusion: ML has become a viable prediction method for a wide variety of structural industrial applications, and hence it may serve as a potential successor for routinely used empirical model in the design of concrete structures. The non-ML structural engineering community may use this overview of ML methods, fundamental principles, access codes, ML libraries, and gathered datasets to construct their own ML models for useful uses. Structural engineering practitioners and researchers may benefit from this article's incorporation of concrete ML studies as well as structural engineering datasets. The construction industry stands to benefit from the use of machine learning in terms of cost savings, time savings, and labor intensity. The statistical and graphical representation of contributing authors and participants in this work might facilitate future collaborations and the sharing of novel ideas and approaches among researchers and industry professionals. The limitation of this systematic review is that it is only PubMed based which means it includes studies included in the PubMed database.

Smart face shield for the monitoring of COVID-19 physiological parameters: Personal protective equipment (PPE) for health-care workers (HCW's) and COVID-19 patients.

The COVID-19 pandemic has triggered instabilities in various aspects of daily life. This includes economic, social, financial, and health crisis. In addition, the COVID-19 pandemic with the evolution of different virus strains such as delta and omicron has led to frequent global lockdowns. These lockdowns have caused disruption of trade activities that in turn have led to the shortage of medical supplies, especially personal protective equipment's (PPE's). Health-care workers (HCW's) have been at the forefront of the fight against this pandemic and are responsible for saving millions of lives worldwide. However, the PPE's available to HCW's in the form of face shields and face masks only provide face and eye protection without encapsulating the ability to continuously monitor vital COVID-19 parameters including body temperature, heart rate, and SpO2. Hence, in this study, we propose the design and utilization of a PPE in the form of smart face shield. The device has been integrated with the MAX30102 sensor for measuring the heart rate and oxygen saturation (SpO2) and the DS18B20 body temperature measuring sensor. The readings of these sensors are analyzed by a NodeMCU ESP8266 and measurements are displayed on a laptop screen. Also, the Wi-Fi module of NodeMCU ESP8266 enables compatibility with the ThingSpeak mobile application and permits HCW's and patients recovering from COVID-19 to keep a track of their physiological parameters. Overall, this PPE has been observed to provide reliable readings and the results indicate that the designed prototype can be used for monitoring COVID-19 essential parameters.

Recognition of Urdu sign language: a systematic review of the machine learning classification.

Background and Objective: Humans communicate with one another using language systems such as written words or body language (movements), hand motions, head gestures, facial expressions, lip motion, and many more. Comprehending sign language is just as crucial as learning a natural language. Sign language is the primary mode of communication for those who have a deaf or mute impairment or are disabled. Without a translator, people with auditory difficulties have difficulty speaking with other individuals. Studies in automatic recognition of sign language identification utilizing machine learning techniques have recently shown exceptional success and made significant progress. The primary objective of this research is to conduct a literature review on all the work completed on the recognition of Urdu Sign Language through machine learning classifiers to date. Materials and methods: All the studies have been extracted from databases, i.e., PubMed, IEEE, Science Direct, and Google Scholar, using a structured set of keywords. Each study has gone through proper screening criteria, i.e., exclusion and inclusion criteria. PRISMA guidelines have been followed and implemented adequately throughout this literature review. Results: This literature review comprised 20 research articles that fulfilled the eligibility requirements. Only those articles were chosen for additional full-text screening that follows eligibility requirements for peer-reviewed and research articles and studies issued in credible journals and conference proceedings until July 2021. After other screenings, only studies based on Urdu Sign language were included. The results of this screening are divided into two parts; (1) a summary of all the datasets available on Urdu Sign Language. (2) a summary of all the machine learning techniques for recognizing Urdu Sign Language. Conclusion: Our research found that there is only one publicly-available USL sign-based dataset with pictures versus many character-, number-, or sentence-based publicly available datasets. It was also concluded that besides SVM and Neural Network, no unique classifier is used more than once. Additionally, no researcher opted for an unsupervised machine learning classifier for detection. To the best of our knowledge, this is the first literature review conducted on machine learning approaches applied to Urdu sign language.

QoS Aware and Fault Tolerance Based Software-Defined Vehicular Networks Using Cloud-Fog Computing.

Software-defined network (SDN) and vehicular ad-hoc network (VANET) combined provided a software-defined vehicular network (SDVN). To increase the quality of service (QoS) of vehicle communication and to make the overall process efficient, researchers are working on VANET communication systems. Current research work has made many strides, but due to the following limitations, it needs further investigation and research: Cloud computing is used for messages/tasks execution instead of fog computing, which increases response time. Furthermore, a fault tolerance mechanism is used to reduce the tasks/messages failure ratio. We proposed QoS aware and fault tolerance-based software-defined V vehicular networks using Cloud-fog computing (QAFT-SDVN) to address the above issues. We provided heuristic algorithms to solve the above limitations. The proposed model gets vehicle messages through SDN nodes which are placed on fog nodes. SDN controllers receive messages from nearby SDN units and prioritize the messages in two different ways. One is the message nature way, while the other one is deadline and size way of messages prioritization. SDN controller categorized in safety and non-safety messages and forward to the destination. After sending messages to their destination, we check their acknowledgment; if the destination receives the messages, then no action is taken; otherwise, we use a fault tolerance mechanism. We send the messages again. The proposed model is implemented in CloudSIm and iFogSim, and compared with the latest models. The results show that our proposed model decreased response time by 50% of the safety and non-safety messages by using fog nodes for the SDN controller. Furthermore, we reduced the execution time of the safety and non-safety messages by up to 4%. Similarly, compared with the latest model, we reduced the task failure ratio by 20%, 15%, 23.3%, and 22.5%.

A computer vision-based system for recognition and classification of Urdu sign language dataset.

Human beings rely heavily on social communication as one of the major aspects of communication. Language is the most effective means of verbal and nonverbal communication and association. To bridge the communication gap between deaf people communities, and non-deaf people, sign language is widely used. According to the World Federation of the Deaf, there are about 70 million deaf people present around the globe and about 300 sign languages being used. Hence, the structural form of the hand gestures involving visual motions and signs is used as a communication system to help the deaf and speech-impaired community for daily interaction. The aim is to collect a dataset of Urdu sign language (USL) and test it through a machine learning classifier. The overview of the proposed system is divided into four main stages i.e., data collection, data acquisition, training model ad testing model. The USL dataset which is comprised of 1,560 images was created by photographing various hand positions using a camera. This work provides a strategy for automated identification of USL numbers based on a bag-of-words (BoW) paradigm. For classification purposes, support vector machine (SVM), Random Forest, and K-nearest neighbor (K-NN) are used with the BoW histogram bin frequencies as characteristics. The proposed technique outperforms others in number classification, attaining the accuracies of 88%, 90%, and 84% for the random forest, SVM, and K-NN respectively.

Comparative Analysis of CNN and RNN for Voice Pathology Detection.

Diagnosis on the basis of a computerized acoustic examination may play an incredibly important role in early diagnosis and in monitoring and even improving effective pathological speech diagnostics. Various acoustic metrics test the health of the voice. The precision of these parameters also has to do with algorithms for the detection of speech noise. The idea is to detect the disease pathology from the voice. First, we apply the feature extraction on the SVD dataset. After the feature extraction, the system input goes into the 27 neuronal layer neural networks that are convolutional and recurrent neural network. We divided the dataset into training and testing, and after 10 k-fold validation, the reported accuracies of CNN and RNN are 87.11% and 86.52%, respectively. A 10-fold cross-validation is used to evaluate the performance of the classifier. On a Linux workstation with one NVidia Titan X GPU, program code was written in Python using the TensorFlow package.

Inter classifier comparison to detect voice pathologies.

Voice pathologies are irregular vibrations produced due to vocal folds and various factors malfunctioning. In medical science, novel machine learning algorithms are applied to construct a system to identify disorders that occur invoice. This study aims to extract the features from the audio signals of four chosen diseases from the SVD dataset, such as laryngitis, cyst, non-fluency syndrome, and dysphonia, and then compare the four results of machine learning algorithms, i.e., SVM, Naïve Byes, decision tree and ensemble classifier. In this project, we have used a comparative approach along with the new combination of features to detect voice pathologies which are laryngitis, cyst, non-fluency syndrome, and dysphonia from the SVD dataset. The combination of specific 13 MFCC (mel-frequency cepstral coefficients) features along with pitch, zero crossing rate (ZCR), spectral flux, spectral entropy, spectral centroid, spectral roll-off, and short term energy for more accurate detection of voice pathologies. It is proven that the combination of features extracted gives the best product on the audio, which split into 10 ms. Four machine learning classifiers, SVM, Naïve Bayes, decision tree and ensemble classifier for the inter classifier comparison, give 93.18, 99.45,100 and 51%, respectively. Out of these accuracies, both Naïve Bayes and the decision tree show the most promising results with a higher detection rate. Naïve Bayes and decision tree gives the highest reported outcomes on the selected set of features in the proposed methodology. The SVM has also been concluded to be the commonly used voice condition identification algorithm.

Prevalence and Predictors of Use of Home Sphygmomanometers Among Hypertensive Patients.

OBJECTIVE: Few studies have looked at the predictors of use of home sphygmomanometers among hypertensive patients in low-income countries such as Pakistan. Considering the importance of home blood pressure monitoring (HBPM), cross-sectional study was conducted to evaluate the prevalence and predictors of the usage of all kinds of HBPM devices. METHOD: This study was conducted in Karachi during the time period of January-February 2017. Adult patients previously diagnosed with hypertension visiting tertiary care hospitals were selected for the study. Interviews from the individuals were conducted after verbal consent using a pre-coded questionnaire. The data was analyzed using Statistical Package for the Social Sciences v. 23.0 (SPSS, IBM Corporation, NY, USA). Chi-squared test was applied as the primary statistical test. RESULTS: More than half of the participants used a home sphygmomanometer (n=250, 61.7%). The age, level of education, family history of hypertension, compliance to drugs and blood pressure (BP) monitoring, few times a month at clinics were significant determinants of HBPM (P values < 0.001). It was found that more individuals owned a digital sphygmomanometer (n=128, 51.3%) as compared to a manual type (n=122, 48.8%). Moreover, avoiding BP measurement in a noisy environment was the most common precaution taken (n=117, 46.8%). CONCLUSION: The study showed that around 40% of the hypertensive individuals did not own a sphygmomanometer and less than 25% performed HBPM regularly. General awareness by healthcare professionals can be a possible factor which can increase HBPM.