RESUMO
Silicone passive samplers were assessed for measuring personal exposure to 37 flame retardants at three Québec e-waste recycling facilities. Silicone brooches (n = 45), wristbands (n = 28), and armbands (n = 9) worn during a â¼8 h work shift accumulated detectable amounts of 95-100% of the target compounds. Brooch concentrations were significantly correlated with those from active air samplers from which we conclude that the brooches could be used to approximate inhalation exposure and other exposures related to air concentrations such as dermal exposure. The generic sampling rate of the brooch (19 ± 11 m3 day-1 dm-2) was 13 and 22 times greater than estimated for home and office environments, respectively, likely because of the dusty work environment and greater movement of e-waste workers. BDE-209 concentrations in brooches and wristbands were moderately and significantly (p < 0.05) correlated with levels in blood plasma; organophosphorus esters in brooches and wristbands were weakly and insignificantly correlated with their metabolite biomarkers in post-shift spot urine samples. Silicone brooches and wristbands deployed over a single shift in a dusty occupational setting can be useful for indicating the internal exposure to compounds with relatively long biological half-lives, but their use for compounds with relatively short half-lives is not clear and may require either a longer deployment time or an integrated biomarker measure.
Assuntos
Resíduo Eletrônico , Retardadores de Chama , Exposição Ocupacional , Monitoramento Ambiental , Retardadores de Chama/análise , Humanos , Organofosfatos , Quebeque , SiliconesRESUMO
Vulnerabilities in workers performing electronics recycling (e-recycling) in the informal sector worldwide have been well documented. However, the growing e-recycling industry in the formal sector still brings many challenges to protect the health of workers and their environment. This commentary aims to draw attention to the overlooked vulnerabilities faced by the workers of the e-recycling industry formal sector in high-income countries and discuss the potential impact on health inequalities experienced by these workers. Expanding the definition of vulnerability, not limited to the biological susceptibility to chemical and physical exposures, the demographic characteristics of workers in the e-recycling formal sector often reveal social groups known to be disadvantaged regarding occupational exposures and health effects, including young workers, immigrant or ethnic minorities, and workers with mental or physical health issues or disabilities. Overlapping structural vulnerabilities of the e-recycling industry stem from its newness, its working conditions, its conditions of employment, and the sociodemographic characteristics of its workforce. This phenomenon in high-income countries is not restricted to the e-recycling industry alone. It is rather a symptom of more generalized macro socioeconomical phenomena. The present challenges are in line with the new gig and green economies and changes in the global market, and their consequences on the solid waste sector. Continued efforts to strengthen the inclusion of social aspects of health into the complex interaction of the structural vulnerabilities met by e-recycling workers will be essential to anticipate and prevent health issues in this essential but still emerging workforce.
Assuntos
Eletrônica , Indústrias , Saúde Ocupacional/tendências , Reciclagem , Populações Vulneráveis , Países Desenvolvidos , Disparidades nos Níveis de Saúde , Humanos , Exposição OcupacionalRESUMO
Electronic waste recycling (e-recycling) exposes workers to substances such as flame retardants and metals. Some of them are known or suspected endocrine disruptors that could affect hormonal homeostasis and eventually result in adverse health outcomes. Our aim was to measure biological concentrations of organophosphate ester (OPE) metabolites, polybrominated diphenyl ethers (PBDEs), mercury, lead and cadmium in e-recycling workers, and to explore associations with thyroid and sexual hormones. In a cross-sectional study, end-of-shift blood and urine spot samples were collected from 23 women and 77 men in six e-recycling facilities and one commercial recycling facility. Urinary concentrations of 15 OPE metabolites and mercury, and blood concentrations of 12 PBDE congeners, lead, cadmium, and thyroid (thyroxine [T4], triiodothyronine [T3], thyroid stimulating hormone [TSH]) and sexual (testosterone [T], estradiol, Follicle Stimulating Hormone [FSH], Luteinizing hormone [LH]) hormones were measured. E-recycling workers had higher concentrations of BDE209, all OPE metabolites, and lead than commercial recycling workers. In e-recycling workers, plasma geometric mean concentration of BDE209 was 18 ng/g lipids (geometric standard deviation [GSD]: 2.8) vs.1.7 ng/g lipids (GSD: 2.8) in commercial recycling, and urinary geometric mean concentration of diphenyl phosphate (DPhP), a major metabolite of triphenyl phosphate, was 1.7 ng/ml (GSD: 2.5), vs. 0.95 ng/ml (GSD: 2.0). In men, a two-fold increase in BDE209 was associated with 3.1% (95% Confidence interval: 0.07, 6.1) higher levels of total T4, and a two-fold increase in tert-butyl diphenyl phosphate (tb-DPhP) was associated with 18% (-29, -4.7) lower total T, 18% (-27, -6.9) lower free T and 13% (-25, 0.70) lower free T/estradiol ratio. In women, a two-fold increase in BDE153 was associated with 10% (-17, -3.2) lower free T3. To our knowledge, this is the first study to show associations between OPE metabolites and sex hormones in adults. Although some of our results are not conclusive and need replication, they suggest that prudent avoidance should be applied in risk management of flame retardants.
Assuntos
Resíduo Eletrônico , Disruptores Endócrinos , Poluentes Ambientais , Éteres Difenil Halogenados , Hormônios , Metais Pesados , Exposição Ocupacional/análise , Organofosfatos , Adulto , Monitoramento Biológico , Disruptores Endócrinos/sangue , Disruptores Endócrinos/urina , Poluentes Ambientais/sangue , Poluentes Ambientais/urina , Feminino , Éteres Difenil Halogenados/sangue , Éteres Difenil Halogenados/urina , Hormônios/sangue , Hormônios/urina , Humanos , Masculino , Metais Pesados/sangue , Metais Pesados/urina , Pessoa de Meia-Idade , Organofosfatos/sangue , Organofosfatos/urina , Reciclagem , Reprodução , Glândula Tireoide , Adulto JovemRESUMO
BACKGROUND: In response to a worldwide increase in production of electronic waste, the e-recycling industry is rapidly rowing. E-recycling workers are exposed to many potentially toxic contaminants, among which flame retardants (FRs), mainly suspected of being endocrine disruptors, are thought to be the most prevalent. OBJECTIVE: To conduct an exposure assessment of four chemical groups of FRs in Canadian e-recycling facilities, and to identify the main cofactors of exposure. METHODS: Personal air samples were collected over a workday for 85 workers in six e-recycling facilities, grouped into three facility sizes, and for 15 workers in control commercial waste facilities. Total particulate matter was measured by gravimetry with stationary air samples. FRs were collected on OSHA versatile samplers, which allow particulate and vapor phases collection. Fifteen polybrominated diphenyl ether congeners (PBDEs), nine novel brominated (NBFRs), two chlorinated (ClFRs), and fourteen organophosphate ester (OPEs) flame retardants were analysed by gas chromatography-mass spectrometry. Sociodemographic data, tasks performed and materials processed by participating workers were recorded. Tobit regressions were used to identify cofactors of exposure, and their conclusions were corroborated using semi-parametric reverse Cox regressions. RESULTS: Thirty-nine of the 40 FRs analysed were detected in at least one air sample in e-recycling, and workers in this industry were exposed on average to 26 (range 12 to 39) different substances. The most detected chemical group of FRs in e-recycling was PBDEs with geometric mean sums of all congeners ranging from 120 to 5100â¯ng/m3, followed by OPEs with 740 to 1000â¯ng/m3, NBFRs with 7.6 to 100â¯ng/m3, and finally ClFRs with 3.9 to 32â¯mg/m3. The most important cofactor of exposure was the size of the e-recycling facility, with the largest one presenting on average 12 times the concentrations found in the control facility. Among tasks as potential cofactors of exposure, manual dismantling and baler operation exposed workers to some of the highest concentrations of PBDEs and ClFRs. There was a reduction of up to 27% in exposure to FRs associated with a 3-year increase in seniority. Finally, particulate matter concentrations in e-recycling facilities were highly correlated with all chemical classes except OPEs, and were higher in the large facility. CONCLUSIONS: Among the FRs analysed, PBDE exposure was particularly high in e-recycling. Dust and particulate matter reduction strategies in these workplaces, together with training on proper working practices would certainly be important first steps to lower occupational exposures and prevent potential health effects.
Assuntos
Poeira/análise , Resíduo Eletrônico/análise , Retardadores de Chama/análise , Exposição Ocupacional , Organofosfatos/análise , Reciclagem , Adulto , Idoso , Canadá , Ésteres/análise , Feminino , Halogenação , Humanos , Masculino , Pessoa de Meia-Idade , Material Particulado/análise , Adulto JovemRESUMO
Biomethanization is a new technology used for green-waste valorization where organic waste is biodegraded by microbial communities under anaerobic conditions. The main product of this type of anaerobic digestion is a biogas used as an energy source. Moving and handling organic waste may lead to the emission of high concentrations of bioaerosols. High exposure levels are associated with adverse health effects amongst green environment workers. Fungal spores are suspected to play a role in many respiratory illnesses. There is a paucity of information related to the detailed fungal diversity in biomethanization facilities. The aim of this study was to provide an in-depth description of fungal bioaerosols in biomethanization work environments using a next-generation sequencing approach combined with real-time polymerase chain reaction (PCR). Two biomethanization facilities treating different wastes were visited during the sampling campaign (n = 16). Quantification of Penicillium/Aspergillus and Aspergillus fumigatus revealed a greater exposure risk during summer for both facilities visited. Concentrations of Penicillium and Aspergillus were similar in all work areas in both biomethanization facilities. Taxonomy analyses showed that the type of waste treated affects the fungal diversity of aerosols emitted. Although eight classes were evenly distributed in all samples, Eurotiomycetes were more dominant in the first facility and Agaricomycetes were dominant in the second one. A large diversity profile was observed in bioaerosols from both facilities showing the presence of pathogenic fungi. The following fungi detected are known allergens and/or are opportunistic pathogens: Aspergillus, Malassezia, Emericella, Fusarium, Acremonium, and Candida. Daily exposure to these fungi may put workers at risk. The information from this study can be used as a reference for minimizing occupational exposure in future biomethanization facilities. Implications: Biomethanization is a new technology used for green-waste valorization where organic waste is biodegraded by microbial communities. Effective waste management is increasingly recognized as a strategic approach for achieving newly created regulations concerning the disposal of organic residues; therefore, an expansion of facilities is expected. Workers' exposure to diverse fungal communities is certain, as fungi are ubiquitous and necessary in organic matter decomposition. Monitoring this occupational exposure is important in order to prevent workers' health problems.
Assuntos
Aerossóis/análise , Microbiologia do Ar , Biocombustíveis/análise , Fungos/fisiologia , Exposição Ocupacional/análise , Gerenciamento de Resíduos , Monitoramento Ambiental , Humanos , Quebeque , Reação em Cadeia da Polimerase em Tempo RealRESUMO
Despite regulatory efforts and position papers, electrical and electronic waste (e-waste) remains ill-managed as evidenced by the extremely low rates of proper e-waste recycling (e-recycling) worldwide, ongoing illegal shipments to developing countries and constantly reported human health issues and environmental pollution. The objectives of this review are, first, to expose the complexity of e-waste problems, and then to suggest possible upstream and downstream solutions. Exploring e-waste issues is akin to opening a Pandora's box. Thus, a review of prevailing e-waste management practices reveals complex and often intertwined gaps, issues and challenges. These include the absence of any consistent definition of e-waste to date, a prevalent toxic potential still involving already banned or restricted hazardous components such as heavy metals and persistent and bioaccumulative organic compounds, a relentless growth in e-waste volume fueled by planned obsolescence and unsustainable consumption, problematic e-recycling processes, a fragile formal e-recycling sector, sustained and more harmful informal e-recycling practices, and more convoluted and unpredictable patterns of illegal e-waste trade. A close examination of the e-waste legacy contamination reveals critical human health concerns, including significant occupational exposure during both formal and informal e-recycling, and persistent environmental contamination, particularly in some developing countries. However, newly detected e-waste contaminants as well as unexpected sources and environmental fates of contaminants are among the emerging issues that raise concerns. Moreover, scientific knowledge gaps remain regarding the complexity and magnitude of the e-waste legacy contamination, specifically, a comprehensive characterization of e-waste contaminants, information on the scale of legacy contamination in developing countries and on the potential environmental damage in developed countries, and a stronger body of evidence of adverse health effects specifically ascribed to e-waste contaminants. However, the knowledge accumulated to date is sufficient to raise awareness and concern among all stakeholders. Potential solutions to curb e-waste issues should be addressed comprehensively, by focusing on two fronts: upstream and downstream. Potential upstream solutions should focus on more rational and eco-oriented consumer habits in order to decrease e-waste quantities while fostering ethical and sustained commitments from manufacturers, which include a limited usage of hazardous compounds and an optimal increase in e-waste recyclability. At the downstream level, solutions should include suitable and pragmatic actions to progressively reduce the illegal e-waste trade particularly through international cooperation and coordination, better enforcement of domestic laws, and monitoring in both exporting and receiving countries, along with the supervised integration of the informal sector into the recycling system of developing countries and global expansion of formal e-waste collection and recycling activities. Downstream solutions should also introduce stronger reverse logistics, together with upgraded, more affordable, and eco-friendly and worker-friendly e-recycling technologies to ensure that benefits are derived fully and safely from the great economic potential of e-waste.
Assuntos
Resíduo Eletrônico , Reciclagem , Gerenciamento de Resíduos , Humanos , Metais Pesados/toxicidade , Responsabilidade SocialRESUMO
This study sought to fill the gap in information about the type and the concentration of bioaerosols present in the air of biomethanization facilities (BF). Evaluation of bioaerosol composition and concentration was achieved in two biomethanization facilities located in Eastern Canada, during summer and winter. In order to have a thorough understanding of the studied environment, the methodology combined culture of bacteria and molds, qualitiative polymerase chain reaction (qPCR) for specific microorganisms, endotoxin quantification, and next-generation sequencing (NGS) for bacterial diversity. Results revealed that workers in biomethanization facilities are exposed to bioaerosols and pathogenic microorganisms similar to those found in composting plants. However, human exposure levels to bioaerosols are lower in BF than in composting plants. Despite these differences, use of personal protective equipment is recommended to lower the risks of health problems. IMPLICATIONS: Biomethanization is a new technology used in eastern Canada for waste management. In the next few years, it is expected that there will be an expansion of facilities in response of tight governmental regulations. Workers in biomethanization facilities are exposed to various amounts of bioaerosols composed of some harmful microorganisms. Therefore, monitoring this occupational exposure could be an interesting tool for improving worker's health.
Assuntos
Aerossóis/análise , Exposição Ocupacional/análise , Gerenciamento de Resíduos , Microbiologia do Ar , Bactérias/isolamento & purificação , Canadá , Endotoxinas/análise , Fungos/isolamento & purificação , HumanosRESUMO
In the wake of sustainable development, green jobs are developing rapidly, changing the work environment. However a green job is not automatically a safe job. The aim of the study was to define green jobs, and to establish a preliminary risk assessment of chemical substances and biological agents for workers in Quebec. An operational definition was developed, along with criteria and sustainable development principles to discriminate green jobs from regular jobs. The potential toxicity or hazard associated with their chemical and biological exposures was assessed, and the workers' exposure appraised using an expert assessment method. A control banding approach was then used to assess risks for workers in selected green jobs. A double entry model allowed us to set priorities in terms of chemical or biological risk. Among jobs that present the highest risk potential, several are related to waste management. The developed method is flexible and could be adapted to better appraise the risks that workers are facing or to propose control measures.
Assuntos
Fatores Biológicos/toxicidade , Exposição Ocupacional/análise , Ocupações , Medição de Risco/métodos , Humanos , Quebeque , Gerenciamento de Resíduos , Local de TrabalhoRESUMO
Respiratory effects of ozone in the workplace have not been extensively studied. Our aim was to explore the relationship between daily average ozone levels and compensated acute respiratory problems among workers in Quebec between 2003 and 2010 using a time-stratified case-crossover design. Health data came from the Workers' Compensation Board. Daily concentrations of ozone were estimated using a spatiotemporal model. Conditional logistic regressions, with and without adjustment for temperature, were used to estimate odds ratios (ORs, per 1 ppb increase of ozone), and lag effects were assessed. Relationships with respiratory compensations in all industrial sectors were essentially null. Positive non-statistically significant associations were observed for outdoor sectors, and decreased after controlling for temperature (ORs of 0.98; 1.01 and 1.05 at Lags 0, 1 and 2 respectively). Considering the predicted increase of air pollutant concentrations in the context of climate change, closer investigation should be carried out on outdoor workers.
Assuntos
Poluição do Ar/efeitos adversos , Exposição Ocupacional/efeitos adversos , Ozônio/toxicidade , Doenças Respiratórias/epidemiologia , Doença Aguda , Agricultura , Poluição do Ar/análise , Indústrias Extrativas e de Processamento , Indústria Alimentícia , Agricultura Florestal , Humanos , Exposição Ocupacional/análise , Ozônio/análise , Quebeque/epidemiologia , Doenças Respiratórias/etiologia , Doenças Respiratórias/fisiopatologia , Análise Espaço-Temporal , Temperatura , Meios de TransporteRESUMO
OBJECTIVE: To quantify the associations between occupational injury compensations and exposure to summer outdoor temperatures in Quebec (Canada). METHODS: The relationship between 374,078 injuries compensated by the Workers' Compensation Board (WCB) (between May and September, 2003-2010) and maximum daily outdoor temperatures was modelled using generalised linear models with negative binomial distributions. Pooled effect sizes for all 16 health regions of Quebec were estimated with random-effect models for meta-analyses for all compensations and by sex, age group, mechanism of injury, industrial sector and occupations (manual vs other) within each sector. Time lags and cumulative effect of temperatures were also explored. RESULTS: The relationship between daily counts of compensations and maximum daily temperatures reached statistical significance for three health regions. The incidence rate ratio (IRR) of daily compensations per 1°C increase was 1.002 (95% CI 1.002 to 1.003) for all health regions combined. Statistically significant positive associations were observed for men, workers aged less than 45â years, various industrial sectors with both indoor and outdoor activities, and for slips/trips/falls, contact with object/equipment and exposure to harmful substances/environment. Manual occupations were not systematically at higher risk than non-manual and mixed ones. CONCLUSIONS: This study is the first to quantify the association between work-related injury compensations and exposure to summer temperatures according to physical demands of the occupation and this warrants further investigations. In the context of global warming, results can be used to estimate future impacts of summer outdoor temperatures on workers, as well as to plan preventive interventions.
Assuntos
Temperatura Alta/efeitos adversos , Indústrias , Exposição Ocupacional/efeitos adversos , Traumatismos Ocupacionais/etiologia , Ocupações , Estações do Ano , Trabalho , Adolescente , Adulto , Fatores Etários , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Quebeque , Fatores Sexuais , Indenização aos Trabalhadores , Local de Trabalho , Adulto JovemRESUMO
BACKGROUND: Predicted rise in global mean temperature and intensification of heat waves associated with climate change present an increasing challenge for occupational health and safety. Although important scientific knowledge has been gathered on the health effects of heat, very few studies have focused on quantifying the association between outdoor heat and mortality or morbidity among workers. OBJECTIVE: To quantify the association between occupational heat-related illnesses and exposure to summer outdoor temperatures. METHODS: We modeled 259 heat-related illnesses compensated by the Workers׳ Compensation Board of Quebec between May and September, from 1998 to 2010, with maximum daily summer outdoor temperatures in 16 health regions of Quebec (Canada) using generalized linear models with negative binomial distributions, and estimated the pooled effect sizes for all regions combined, by sex and age groups, and for different time lags with random-effect models for meta-analyses. RESULTS: The mean daily compensation count was 0.13 for all regions of Quebec combined. The relationship between daily counts of compensations and maximum daily temperatures was log-linear; the pooled incidence rate ratio (IRR) of daily heat-related compensations per 1 °C increase in daily maximum temperatures was 1.419 (95% CI 1.326 to 1.520). Associations were similar for men and women and by age groups. Increases in daily maximum temperatures at lags 1 and 2 and for two and three-day lag averages were also associated with increases in daily counts of compensations (IRRs of 1.206 to 1.471 for every 1 °C increase in temperature). CONCLUSION: This study is the first to quantify the association between occupational heat-related illnesses and exposure to summer temperatures in Canada. The model (risk function) developed in this study could be useful to improve the assessment of future impacts of predicted summer outdoor temperatures on workers and vulnerable groups, particularly in colder temperate zones.
Assuntos
Transtornos de Estresse por Calor/epidemiologia , Doenças Profissionais/epidemiologia , Temperatura , Adolescente , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Quebeque/epidemiologiaRESUMO
As it supplies solar power, a priori considered harmless for the environment and human health compared with fossil fuels, the photovoltaic (PV) industry seems to contribute optimally to reduce greenhouse gas emissions and, overall, to sustainable development. However, considering the forecast for rapid growth, its use of potentially toxic substances and manufacturing processes presenting health and safety problems may jeopardize its benefits. This paper aims to establish a profile of the PV industry in order to determine current and emerging environmental and health concerns. A review of PV system life cycle assessments, in light of the current state of the industry and its developmental prospects, reveals information deficits concerning some sensitive life cycle indicators and environmental impacts, together with incomplete information on toxicological data and studies of workers' exposure to different chemical and physical hazards. Although solar panel installation is generally considered relatively safe, the occupational health concerns related to the growing number of hazardous materials handled in the PV industry warrants an all-inclusive occupational health and safety approach in order to achieve an optimal equilibrium with sustainability. To prevent eco-health problems from offsetting the benefits currently offered by the PV industry, manufacturers should cooperate actively with workers, researchers and government agencies toward improved and more transparent research, the adoption of specific and stricter regulations, the implementation of preventive risk management of occupational health and safety and, lastly, greater responsibilization toward PV systems from their design until their end of life.
Assuntos
Indústrias/tendências , Exposição Ocupacional , Saúde Ocupacional , Energia Solar , Meio Ambiente , Previsões , Humanos , SegurançaRESUMO
In the context of climate change, concomitant exposure to heat stress and chemicals takes on great importance. However, little information is available in this regard. The purpose of this research, therefore, was to develop an approach aimed at identifying worker groups that would be potentially most at risk. The approach comprises 5 consecutive steps: - Establishment of a list of occupations for all industry sectors - Determination of heat stress parameters - Identification of occupations at risk of heat stress - Determination of exposure to chemicals - Identification of occupations potentially most at risk. Overall, 1,010 occupations were selected due to their representativeness of employment sectors in Québec. Using a rating matrix, the risk stemming from exposure to heat stress was judged "critical" or "significant" for 257 occupations. Among these, 136 occupations were identified as showing a high potential of simultaneous exposure to heat stress and chemicals. Lastly, a consultation with thirteen experts made it possible to establish a list of 22 priority occupations, that is, 20 occupations in the metal manufacturing sector, as well as roofers and firefighters. These occupations would merit special attention for an investigation and evaluation of the potential effects on workers' health.
Assuntos
Distúrbios Induzidos Quimicamente/complicações , Mudança Climática , Transtornos de Estresse por Calor/complicações , Temperatura Alta/efeitos adversos , Doenças Profissionais/etiologia , Exposição Ocupacional/efeitos adversos , Ocupações , Humanos , Umidade , Quebeque , Radiação , Medição de Risco , Fatores de Risco , Carga de TrabalhoRESUMO
The potential impacts of climate change (CC) on Occupational Health and Safety (OHS) have been studied a little in tropical countries, while they received no attention in northern industrialized countries with a temperate climate. This work aimed to establish an overview of the potential links between CC and OHS in those countries and to determine research priorities for Quebec, Canada. A narrative review of the scientific literature (2005-2010) was presented to a working group of international and national experts and stakeholders during a workshop held in 2010. The working group was invited to identify knowledge gaps, and a modified Delphi method helped prioritize research avenues. This process highlighted five categories of hazards that are likely to impact OHS in northern industrialized countries: heat waves/increased temperatures, air pollutants, UV radiation, extreme weather events, vector-borne/zoonotic diseases. These hazards will affect working activities related to natural resources (i.e. agriculture, fishing and forestry) and may influence the socioeconomic context (built environment and green industries), thus indirectly modifying OHS. From this consensus approach, three categories of research were identified: 1) Knowledge acquisition on hazards, target populations and methods of adaptation; 2) Surveillance of diseases/accidents/occupational hazards; and 3) Development of new occupational adaptation strategies.
Assuntos
Mudança Climática , Saúde Ocupacional , Adaptação Fisiológica , Poluentes Atmosféricos/efeitos adversos , Animais , Consenso , Técnica Delphi , Humanos , Quebeque , Medição de Risco , Fatores de Risco , Raios Ultravioleta/efeitos adversos , Zoonoses/complicaçõesRESUMO
This study assessed the contribution of electron microscopy to the characterization of nanoparticles and compared the degree of variability in sizes observed within each stage when sampled by two cascade impactors: an Electrical Low Pressure Impactor (ELPI) and a Micro-Orifice Uniform Deposit Impactor (MOUDI). A TiO(2) nanoparticle (5 nm) suspension was aerosolized in an inhalation chamber. Nanoparticles sampled by the impactors were collected on aluminum substrates or TEM carbon-coated copper grids using templates, specifically designed in our laboratories, for scanning and transmission electron microscopy (SEM, TEM) analysis, respectively. Nanoparticles were characterized using both SEM and TEM. Three different types of diameters (inner, outer, and circular) were measured by image analysis based on count and volume, for each impactor stage. Electron microscopy, especially TEM, is well suited for the characterization of nanoparticles. The MOUDI, probably because of the rotation of its collection stages, which can minimize the resuspension of particles, gave more stable results and smaller geometric standard deviations per stage. Our data suggest that the best approach to estimate particle size by electron microscopy would rely on geometric means of measured circular diameters. Overall, the most reliable data were provided by the MOUDI and the TEM sampling technique on carbon-coated copper grids for this specific experiment. This study indicates interesting findings related to the assessment of impactors combined with electron microscopy for nanoparticle characterization. For future research, since cascade impactors are extensively used to characterize nano-aerosol exposure scenarios, high-performance field emission scanning electron microscopy (FESEM) should also be considered.
Assuntos
Nanopartículas Metálicas/análise , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Tamanho da Partícula , Titânio/análiseRESUMO
OBJECTIVES: The relationship between electromagnetic field exposure and stillbirth has not been evaluated. We assessed associations between residential proximity to extremely low frequency power transmission lines and stillbirth across gestational age. METHODS: Data included singleton live births (N=514,826) and stillbirths (N=2033) for 1998-2007 in metropolitan areas of Québec, Canada. Using power transmission line maps, the distances between lines and residential six-digit postal codes (<25, 25-49.9, 50-74.9, 75-99.9, ≥ 100 m) were calculated. Generalised estimating equations were used to compute ORs and 95% CIs for distance and stillbirth, accounting for individual and area characteristics. Early preterm (< 28 weeks), late preterm (28-36 weeks) and term (≥ 37 weeks) stillbirths were examined relative to fetuses-at-risk. RESULTS: There was no association between distance and preterm stillbirth. The odds of term stillbirth for <25 m were greater compared to ≥ 100 m (OR 2.25, 95% CI 1.14 to 4.45), but no dose-response pattern was apparent. CONCLUSIONS: A graded dose-response trend between distance to lines and odds of stillbirth was not found, but the likelihood of term stillbirth was elevated for residences within 25 m of power transmission lines. Residential proximity to transmission lines is unlikely to be associated with stillbirth, but more research is needed to rule out a possible link.
Assuntos
Fontes de Energia Elétrica/efeitos adversos , Radiação Eletromagnética , Exposição Ambiental/efeitos adversos , Morte Fetal/etiologia , Natimorto/epidemiologia , Adulto , Feminino , Morte Fetal/epidemiologia , Idade Gestacional , Humanos , Razão de Chances , Gravidez , Quebeque/epidemiologia , Estudos Retrospectivos , Fatores de Risco , Adulto JovemRESUMO
The toxicity of 3 chemical forms of beryllium (Be) was compared in this study. A total of 160 mice equally divided into 4 groups were exposed by inhalation (nose only) for 3 consecutive weeks, 5 d/week, 6 h/d. One group was used as control, while the 3 others were exposed to fine particles of Be metal, Be oxide (BeO), or Be aluminum (BeAl). Except for the controls, the target level of exposure was 250 µg/m(3). In all, 35 mice/group were sacrificed 1 week postexposure and another 5 mice 3 weeks postexposure. The BeO group showed the highest lung Be concentration with higher interleukin 12 (IL-12) and interferon-γ (IFN-γ) levels, while the Be group produced the most severe lung inflammation and higher tumor necrosis factor-α (TNF-α) and CD4+ T cells levels. Data suggested that Be and BeO apparently produced more pulmonary toxicity than BeAl. However, this conclusion is not definitive, because of different confounding factors such as particle sizes, specific surface area, and solubility.
Assuntos
Berílio/toxicidade , Exposição por Inalação , Pulmão/efeitos dos fármacos , Animais , Berílio/química , Linfócitos T CD4-Positivos/efeitos dos fármacos , Relação Dose-Resposta a Droga , Interferon gama/análise , Interleucina-12/análise , Pulmão/patologia , Masculino , Camundongos , Camundongos Endogâmicos C3H , Tamanho da Partícula , Fator de Necrose Tumoral alfa/análiseRESUMO
Beryllium (Be) is still not well understood from a toxicological point of view, and studies that involve the determination of different Be compounds species in tissues need to be conducted. In this paper we describe the development and validation of reliable methods for the detection of ultra-trace levels of Be in various biological matrices. Blood and tissues (liver, lung, spleen, and kidney) were used in this study. The samples were digested with a mixture of nitric and perchloric acids for Be and BeAl and an addition of sulfuric acid was made for BeO. The solutions were analyzed by inductively coupled plasma mass spectrometry with (6)Li as internal standard. The detection limits are in the order of 0.02 ng/g for tissue and 0.03 ng/mL for blood, and were compared to existing reference methods. To our knowledge, this is the first study that assesses dissolution of the different Be compounds in biological matrices, while also undergoing a rigorous optimization and complete validation. This method has proven that it is reliable, among the most sensitive available in the literature, and that it can be used in trace toxicological studies for Be.
Assuntos
Ligas/química , Alumínio/química , Berílio/análise , Poluentes Ambientais/análise , Ligas/análise , Métodos Analíticos de Preparação de Amostras , Animais , Berílio/sangue , Calibragem , Poluentes Ambientais/sangue , Humanos , Rim/química , Limite de Detecção , Fígado/química , Pulmão/química , Masculino , Microquímica/métodos , Ratos , Ratos Sprague-Dawley , Baço/química , Sus scrofaRESUMO
This study aimed to determine the toxicity and toxicokinetic of three Be chemical species A total of 120 mice (four groups of 30) were nose-only exposed. The first group was used as a control while the three others were exposed to 250 microg m(-3) of fine particles of three different Be species (Be metal, Be-F; Be oxide, BeO-F; Be aluminium, BeAl-F). Exposure lasted over three consecutive weeks, five days per week and 6 h per day. Blood and several tissues were collected one week after exposure. Urines were collected before the beginning of exposure, at the end of every week of exposure and one week after exposure. Results showed that urine concentrations were different from one Be species to another and that excretion continued after the end of exposure. Except for BeO-F, where Be urine concentrations were stable during the three weeks of exposure, concentrations of Be-F and BeAl-F reached a peak after the first week. According to particle size, BeO-F obtained the highest theoretical pulmonary deposition rate, which partially led to the highest Be lung concentration. This group also presented the lowest urine concentration but that did not lead to more severe lung inflammation. Moreover, even if BeAl-F obtained the lowest percentage theoretical pulmonary deposition, it showed the highest Be urinary concentration, the lowest Be lung concentration and the lowest lung toxicity. In this specific case, a high Be concentration in urine did not reflect a high exposure or a severe toxic effect.
Assuntos
Beriliose/etiologia , Berílio/farmacocinética , Pulmão/efeitos dos fármacos , Animais , Beriliose/patologia , Beriliose/urina , Berílio/química , Berílio/toxicidade , Exposição por Inalação , Pulmão/metabolismo , Pulmão/patologia , Masculino , Camundongos , Camundongos Endogâmicos C3H , Tamanho da PartículaRESUMO
Beryllium (Be) is used in several forms: pure metal, beryllium oxide, and as an alloy with copper, aluminum, or nickel. Beryllium oxide, beryllium metal, and beryllium alloys are the main forms present in the workplace, with inhalation being the primary route of exposure. Cases of workers with sensitization or chronic beryllium disease challenge the scientific community for a better understanding of Be toxicity. Therefore, a toxicological inhalation study using a murine model was performed in our laboratory in order to identify the toxic effects related to different particle sizes and chemical forms of Be. This article attempts to provide information regarding the relative effectiveness of the environmental monitoring and exposure protection program that was enacted to protect staff (students and researchers) in this controlled animal beryllium inhalation exposure experiment. This includes specific attention to particle migration control through intensive housekeeping and systematic airborne and surface monitoring. Results show that the protective measures applied during this research have been effective. The highest airborne Be concentration in the laboratory was less than one-tenth of the Quebec OEL (occupational exposure limit) of 0.15 microg/m(3). Considering the protection factor of 10(3) of the powered air-purifying respirator used in this research, the average exposure level would be 0.03 x 10(- 4) microg/m(3), which is extremely low. Moreover, with the exception of one value, all average Be concentrations on surfaces were below the Quebec Standard guideline level of 3 microg/100 cm(2) for Be contamination. Finally, all beryllium lymphocyte proliferation tests for the staff were not higher than controls.