Chewing Function with Efficiency Tests in Subjects Wearing Clear Aligners.

This study assessed the masticatory function of participants wearing clear aligners in order to determine whether these devices can be worn even when eating and therefore worn to extend treatment time and boost treatment effectiveness. An intercontrol test was conducted on 20 patients who received Invisalign® treatment. Each participant was instructed to chew two pieces of Hue-Check Gum® chewing gum (one pink and the other blue) in 5, 10, and 20 cycles both with and without aligners. After being removed from the oral cavity, the gum was dried and pressed using a 1 × 50 × 50 mm model that was 3D printed with a transparent layer in between. After being scanned on both sides with a flatbed scanner at 600 dpi, the samples were saved as jpg files and subjected to an optoelectronic examination using ViewGum software. To validate the procedure, a control group from a different institution (University of Bern) was used. A statistical analysis of the data was carried out. The Shapiro-Wilk test was used to confirm the normality of the samples. A one-way ANOVA test, a homogeneity of variance test, and a t-test did not reveal statistically significant differences between the two control groups, thus validating the methodology employed. In summary, clear aligners do not radically change the masticatory function while they are worn. As a result, clinicians can exploit the aligners for chewing to obtain a better fit of the plastic material to the dental surface and to attachments. Treatment times for patients could also be shorter.

Enhancing SEM positioning precision with a LEGO®-based sample fitting system.

Scanning electron microscopy (SEM) is a precious tool in materials science and morphology sciences, enabling detailed examination of materials at the nanoscale. However, precise and accurate sample repositioning during different observation sessions remains a significant challenge, impacting the quality and repeatability of SEM analyses. This study aimed to develop and evaluate a LEGO®-based sample positioning system for SEM analysis. The system was designed to consistently identify and align features across multiple repositioning cycles, maintain accurate positioning along the z-axis, minimize distortion, and provide repeatable and reliable results. The results indicated a high degree of precision and accuracy in the repositioning process, as evidenced by the minimal displacements, deviations in scaling and shearing, and the highly significant results (p < 0.001) obtained from the analysis of absolute translations and rotations. Moreover, the analyses were consistently replicated across six repetitions, underscoring the reliability of the observed results. While the findings suggest that the LEGO-based sample positioning system is promising for enhancing SEM analyses' quality and repeatability, further studies are needed to optimize the system's design and evaluate its performance in different SEM applications. Ultimately, this study contributes to the ongoing efforts to develop cost-effective, customizable, and accurate solutions for sample positioning in SEM, contributing to the advancement of materials science research and all SEM analysis requiring overtime observations of the same sample. RESEARCH HIGHLIGHTS: This study focused on the development and evaluation of a novel LEGO-based sample positioning system specifically designed for SEM analysis. One of the standout features of this system is its ability to consistently identify and align features across multiple repositioning cycles, showcasing its precision and reliability. To further understand the mechanical aspects of the SEM stage, we employed the Rambold Kontroll comparator, which provided a baseline understanding of its mechanical tolerance. The registration process results were particularly noteworthy, as they revealed high accuracy with minimal displacements. Furthermore, the consistent outcomes observed across multiple repetitions emphasize the reliability and robustness of the methods we employed in this research.

Human Dental Pulp Mesenchymal Stem Cell-Derived Soluble Factors Combined with a Nanostructured Scaffold Support the Generation of a Vascular Network In Vivo.

Among all strategies directed at developing new tools to support re-vascularization of damaged tissues, the use of pro-angiogenic soluble factors, derived from mesenchymal stem cells (MSCs), appears a promising approach for regenerative medicine. Here, we compared the feasibility of two devices, generated by coupling soluble factors of human dental pulp mesenchymal stem cells (DPSCs), with a nanostructured scaffold, to support angiogenesis once transplanted in mice. DPSCs were obtained from impacted wisdom tooth removal, usually considered surgical waste material. After 28 days, we verified the presence of active blood vessels inside the scaffold through optical and scansion electron microscopy. The mRNA expression of surface antigens related to macrophage polarization (CD68, CD80, CD86, CD163, CD206), as well as pro-angiogenic markers (CD31, CD34, CD105, Angpt1, Angpt2, CDH5) was evaluated by real-time PCR. Our results demonstrate the capability of DPSC-scaffold and DPSC soluble factors-scaffold to support angiogenesis, similarly to adipose stem cells, whereas the absence of blood vessels was found in the scaffold grafted alone. Our results provide evidence that DPSC-conditioned medium can be proposed as a cell-free preparation able to support angiogenesis, thus, providing a relevant tool to overcome the issues and restrictions associated with the use of cells.

The Dark Side of Artificial Intelligence: The Possible Risk of Falsifying Images for Scientific Articles.

This article explores the potential risks associated with using artificial intelligence (AI)-generated images in the field of microscopy. It discusses the current state-of-the-art AI-based image-generation techniques and their limitations. It investigates the potential risks associated with the illegal use of AI-generated images, including their use in creating falsified scientific data and the consequences of such misuse. The article concludes by exploring possible solutions to mitigate these risks, such as implementing robust authentication methods and developing ethical guidelines for using and disseminating AI-generated images in the field of microscopy. Additionally, the article also presents the results of a survey involving 101 professionals, showing that the recognition of authentic and entirely AI-generated images is performed well. But, the detection of hybrid images could be improved.

3D occlusal changes of upper first molars after rapid maxillary expansion on permanent versus deciduous teeth: a retrospective multicenter CBCT study.

BACKGROUND: The purpose of this study was to compare the three-dimensional dental changes for the maxillary first molars and the overall skeletal effects achieved after expansion between the rapid maxillary expansion (RME) appliance attached to two different anchor units, the maxillary deciduous molars and the maxillary permanent first molars. METHODS: Patients were retrospectively selected according to the anchorage unit used for RME: deciduous upper second molars (RME-E group; 10 M, 10 F; mean age 8.4 ± 1.1 years) and first upper permanent molars (RME-6 group; 10 M, 10 F; mean age 12.6 ± 1.8 years). CBCT scans were obtained before treatment start (T1) and after retention and removal of the expander (T2). Images were analyzed using a new three-dimensional intra-hemi-maxillary reference system. 3D landmarks were marked to calculate all changes on maxillary first permanent molars; mesio-distal and buccal-lingual inclination and rotation, as well as intermolar and interforaminal distances were calculated. The Wilcoxon test was used to compare within-group changes, whereas the Mann-Whitney test was used to compare between-group differences, with the significance level set at 0.05. RESULTS: In the RME-E group, significant distorotation and lingual inclination of the first permanent molars at T2 were observed (p < 0.01); in the RME-6 group, only the buccolingual inclination of the crossbite side after RME was resulted statistically significant (p < 0.01). In both groups, intermolar and interforaminal values increased significantly (p < 0.01). Intergroup analysis showed a significantly higher distorotation and reduced buccal inclination of maxillary first permanent molars in the RME-E group after RME (p < 0.01). CONCLUSIONS: RME is effective in treating maxillary transverse hypoplasia; RME anchored too deciduous teeth spontaneously reduces buccal inclination and increases distorotation of maxillary first permanent molars, whereas anchorage to permanent molars is associated with increased buccal inclination, albeit with little clinical significance.

Investigating the interfaces of the epiphyseal plate: An integrated approach of histochemistry, microtomography and SEM.

We investigated the interfaces of the epiphyseal plate with over- and underlying bone segments using an integrated approach of histochemistry, microtomography and scanning electron microscopy (SEM) to overcome the inherent limitations of sections-based techniques. Microtomography was able to provide an unobstructed, frontal view of large expanses of the two bone surfaces facing the growth plate, while SEM observation after removal of the soft matrix granted an equally unhindered access with a higher resolution. The two interfaces appeared widely dissimilar. On the diaphyseal side the hypertrophic chondrocytes were arranged in tall columns packed in a sort of compact palisade; the interposed extracellular matrix was actively calcifying into a thick mineralized crust growing towards the epiphysis. Behind the mineralization front, histochemical data revealed a number of surviving cartilage islets which were being slowly remodelled into bone. In contrast, the epiphyseal side of the cartilage consisted of a relatively quiescent reserve zone whose mineralization was marginal in amount and discontinuous in extension; the epiphyseal bone consisted of a loose trabecular meshwork, with ample vascular spaces opening directly into the non-mineralized cartilage. On both sides the calcification process took place through the formation of spheroidal bodies 1-2 µm wide which gradually grew by apposition and coalesced into a solid mass, in a way distinctly different from that of bone and other calcified tissues.

Adipose mesenchymal stem cell-derived soluble factors, produced under hypoxic condition, efficiently support in vivo angiogenesis.

Tissue regeneration or healing both require efficient vascularization within a tissue-damaged area. Based on this concept, a remarkable number of strategies, aimed at developing new tools to support re-vascularization of damaged tissue have emerged. Among the strategies proposed, the use of pro-angiogenic soluble factors, as a cell-free tool, appears as a promising approach, able to overcome the issues concerning the direct use of cells for regenerative medicine therapy. Here, we compared the effectiveness of adipose mesenchymal stem cells (ASCs), use as cell suspension, ASC protein extract or ASC-conditioned-medium (i.e., soluble factors), combined with collagenic scaffold, in supporting in vivo angiogenesis. We also tested the capability of hypoxia in increasing the efficiency of ASC to promote angiogenesis, via soluble factors, both in vivo and in vitro. In vivo studies were performed using the Integra® Flowable Wound Matrix, and the Ultimatrix in sponge assay. Flow cytometry was used to characterize the scaffold- and sponge-infiltrating cells. Real-time PCR was used to evaluate the expression of pro-angiogenic factors by stimulating Human Umbilical-Vein Endothelial Cells with ASC-conditioned media, obtained in hypoxic and normoxic conditions. We found that, in vivo, ACS-conditioned media can support angiogenesis similar to ASCs and ASC protein extract. Also, we observed that hypoxia increases the pro-angiogenic activities of ASC-conditioned media, compared to normoxia, by generating a secretome enriched in pro-angiogenic soluble factors, with bFGF, Adiponectine, ENA78, GRO, GRO-a, and ICAM1-3, as most regulated factors. Finally, ASC-conditioned media, produced in hypoxic condition, induce the expression of pro-angiogenic molecules in HUVECs. Our results provide evidence that ASC-conditioned-medium can be proposed as a cell-free preparation able to support angiogenesis, thus providing a relevant tool to overcome the issues and restrictions associated with the use of cells.

Chewing Efficiency Test in Subjects with Clear Aligners.

The aim of this study was to evaluate the masticatory function of subjects with clear aligners and to propose a simple and repeatable method for the clinical and experimental evaluation of masticatory function. For the testing we used almonds, a natural substance that can be easily found and stored, has intermediate consistency and hardness, is insoluble in saliva, and has the ability easily lose the moisture absorbed in the mouth. Thirty-four subjects using the Invisalign® (Align Technology, Santa Clara, CA, USA) protocol were randomly selected. This was an "intercontrol test", i.e., all subjects under the same conditions acted as controls but also as cases whilst wearing the clear aligners. Patients were asked to chew an almond for 20 s, once with aligners and once without aligners. The material was then dried, sieved, and weighted. Statistical analysis was performed to investigate any significative differences. In all our subjects, the efficiency of chewing with clear aligners was found to be comparable to the efficiency of chewing without clear aligners. In detail, the average weight after drying was 0.62 g without aligners and 0.69 g with aligners, while after sieving at 1 mm, the average weight was 0.08 g without aligners and 0.06 g with aligners. The average variation after drying was of 12%, and after sieving at 1 mm, it was 25%. In summary, there was no substantial difference between chewing with or without clear aligners. Despite some discomfort in chewing, the clear aligners were well tolerated by most subjects, who wore them without difficulty even during meals.

The chondro-osseous junction of articular cartilage.

In the synovial joints the transition between the soft articular cartilage and the subchondral bone is mediated by a layer of calcified cartilage of structural and mechanical characteristics closer to those of bone. This layer, buried in the depth of articular cartilage, is not directly accessible and is mostly visualized in histological sections of decalcified tissue, where it appears as a darker strip in contact with the subchondral bone. In this study conventional histology and scanning electron microscopy (SEM) with secondary electron imaging (SE) or backscattered electron imaging (BSE) were used to discriminate the calcified and the uncalcified cartilage in high resolution on native, untreated tissue as well as in deproteinated or demineralized tissue. This approach evidenced a high heterogeneity of the calcified layer of articular cartilage. High resolution pictures revealed that the mineralization process originates by progressive accretion and confluence of individual, small mineral clusters, in a very different way from other hard tissues such as bone, dentin and mineralized tendons. Finally, selective removal of the soft matrix by thermal treatment allowed for the first time a face-on, unrestricted 3D view of the mineralization front.

Predictability of Invisalign® Clear Aligners Using OrthoPulse®: A Retrospective Study.

This preliminary retrospective study evaluates how effective the OrthoPulse® (Biolux Technology, Austria) is in increasing the predictability of orthodontic treatment in patients treated with Invisalign® clear aligners (Align Technology Inc., Tempe, AZ, USA). A group of 376 patients were treated with Invisalign® orthodontic clear aligners in association with an OrthoPulse®. The OrthoPulse® was prescribed for 10 min a day for the entire duration of the orthodontic treatment. The OrthoPulse® App remotely tracked the percentage compliance of each patient. The number of aligners planned with the ClinCheck software at the beginning of the treatment and the number of total aligners (including the adjunctive aligners) used to finish the treatment were then considered. After applying inclusion/exclusion criteria, a total of 40 patients remained in the study and were compared with a control group of 40 patients with the same characteristics as the study group. A statistical analysis was carried out to investigate whether using OrthoPulse® led to a statistical reduction in the number of adjunctive aligners, thus leading to a more accurate prediction of the treatment. The statistical analysis showed that patients who used OrthoPulse® needed fewer finishing aligners and a greater predictability of the treatment was obtained. In fact, in the treated group the average number of additional aligners represented 66.5% of the initial aligners, whereas in the control group 103.4% of the initially planned aligners were needed. In conclusion, in patients treated with clear aligners, OrthoPulse® would appear to increase the predictability of orthodontic treatment with clear aligners, thus reducing the number of finishing phase requirements.

The combined cartilage growth - calcification patterns in the wing-fins of Rajidae (Chondrichthyes): A divergent model from endochondral ossification of tetrapods.

The relationship between cartilage growth - mineralization patterns were studied in adult Rajidae with X-ray morphology/morphometry, undecalcified resin-embedded, heat-deproteinated histology and scanning electron microscopy. Morphometry of the wing-fins, nine central rays of the youngest and oldest specimens documented a significant decrement of radials mean length between inner, middle and outer zones, but without a regular progression along the ray. This suggests that single radial length growth is regulated in such a way to align inter-radial joints parallel to the wing metapterygia curvature. Trans-illumination and heat-deproteination techniques showed polygonal and cylindrical morphotypes of tesserae, whose aligned pattern ranged from mono-columnar, bi-columnar, and multi-columnar up to the crustal-like layout. Histology of tessellated cartilage allowed to identify of zones of the incoming mineral deposition characterized by enhanced duplication rate of chondrocytes with the formation of isogenic groups, whose morphology and topography suggested a relationship with the impending formation of the radials calcified column. The morphotype and layout of radial tesserae were related to mechanical demands (stiffening) and the size/mass of the radial cartilage body. The cartilage calcification pattern of the batoids model shares several morphological features with tetrapods' endochondral ossification, that is, (chondrocytes' high duplication rate, alignment in rows, increased volume of chondrocyte lacunae), but without the typical geometry of the metaphyseal growth plates. RESEARCH HIGHLIGHTS: 1. The wing-fins system consists of stiff radials, mobile inter-radial joints and a flat inter-radial membrane adapted to the mechanical demand of wing wave movement. 2. Growth occurs by forming a mixed calcified-uncalcified cartilage texture, developing intrinsic tensional stresses documented by morphoanatomical data.

Morphology of joints and patterns of cartilage calcification in the endoskeleton of the batoid Raja cf. polystigma.

The skeleton of the batoid fish consists of a mixture of calcified and uncalcified cartilage with a typical layout of mineral deposition toward the outer border, leaving an uncalcified central core in most of the skeleton segments. An exception is observed in the radials, where mineral deposition is central. Joints and endoskeleton segments were studied in two adult samples of Raja cf. polystigma. Histomorphology, mineral deposition pattern, and zonal chondrocyte duplication activity were compared among several endoskeleton segments, but with particular attention to the fin rays; in the first, the uncalcified cartilage is central with an outer layer ranging from mineralized tesserae to a continuous calcified coating, whereas in the second, the uncalcified cartilage surrounds one or more central calcified columns. The diarthroses have a joint cavity closed by a fibrous capsule and the sliding surfaces rest on the base of mineralized tesserae, whereas the interradial amphiarthroses show a layer of densely packed chondrocytes between the flat, calcified discs forming the base of neighboring radials. In the endoskeleton segments, three types of tesserae are distinguished, characterizing the phases of skeletal growth and mineralization which present differences in each endoskeleton segment. The chondrocyte density between central core, subtesseral layer, and radial external cartilage did not show significant differences, while there was a significant difference in chondrocyte density between the latter zones and the type c tesserae of the pelvic girdle. The histomorphology and morphometry observed in Raja cf. polystigma suggest a model of cartilage growth associated with structural stiffening without remodeling. A key point of this model is suggested to be the incomplete mineralization of the tesseral layer and the continuous growth of cartilage, both enabling fluid diffusion through the matrix fibril network of scattered, uncalcified cartilage zones inside and between the tesserae.

Influence of facial components in class III malocclusion esthetic perception of orthodontists, patients, and laypersons.

PURPOSE: The aim of the present study was to investigate the influence of different facial components (face length, lip volume, nose size, and cheekbone contour) on the perception of facial attractiveness of patients with Angle class III malocclusion in different categories of responders (orthodontists, laypersons, patients) with two-dimensional (2D) and three-dimensional (3D) simulations. METHODS: An ideal standard 3D face was manipulated to create a class III facial malocclusion. Four facial components were modified (face length, lip volume, nose size and cheekbone contour) and the resulting simulations were used to obtain 2D figures and 3D videos, which were evaluated in a survey by orthodontists, patients, and laypersons. RESULTS: No significant differences were detected between the 2D figures and 3D video simulations. Good correspondence was shown between the three categories of responders for the most and the least attractive faces. Smaller lips and bigger nose, regardless to the vertical dimension (short or long face), were found to be the least attractive features with agreement of all respondents. CONCLUSION: Regarding class III facial attractiveness perception, the sum of all facial features and not the alteration of a single component alone seems to play a key role in the perception of facial attractiveness. The 2D or 3D perspective did not play a significant role in perception and the analyzed categories of responders did not show significant differences when perceiving facial attractiveness of the utilized simulations.

Slippery when wet: The free surface of the articular cartilage.

The free surface of the articular cartilage must withstand compressive and shearing forces, maintain a low friction coefficient and allow oxygen and metabolites to reach the underlying matrix. In many ways it is critical to the physiology of the whole tissue and its disruption always involves deep pathological alterations and loss of the joint integrity. Being very difficult to image with section-based conventional techniques, it was often described by previous research in conflicting terms or entirely overlooked. High-magnification face-on observations with high resolution scanning electron microscopy and with scanning probe microscopy revealed a very thin, delicate superficial layer rich in glycoconjugates, which may explain the very low friction coefficient of the tissue but which was very easily altered and/or dissolved in the preparation. Beneath this superficial sheet lies a thicker coat of thin, highly uniform, slightly wavy collagen fibrils lying parallel to the surface and mutually interconnected by a huge number of interfibrillar glycosaminoglycan bridges. These bridges and the collagen fibrils form an extended reticular structure able to redistribute tensile and compressive stress across a larger area of the surface and hence a greater volume of tissue.

Full-Digital Workflow for Fabricating a Custom-Made Direct Metal Laser Sintering (DMLS) Mandibular Implant: A Case Report.

Direct Laser Metal Sintering (DLMS) is an additive manufacturing (AM) technique that is capable of manufacturing metal parts according to a three-dimensional (3D) design made using computer-assisted-design (CAD) software, thanks to a powerful laser beam that melts selectively micro-powder layers, one on top of the other, until the desired object is generated. With DMLS, it is now possible to fabricate custom-made titanium implants for oral and maxillofacial applications. We present the case of a 67-year-old woman diagnosed with a squamous cell carcinoma of the mandible. The patient underwent subtotal mandibular resection; conventional reconstruction procedures failed to rehabilitate the function of the mandible. A prosthesis replacing the resected mandible was designed and fabricated using a digital workflow. The extensive bone defect was rehabilitated with a prosthesis replacing the mandibular bone and supporting a morse-taper dental prosthesis. The masticatory function was reestablished.

Buccal bone plate thickness after rapid maxillary expansion in mixed and permanent dentitions.

INTRODUCTION: Rapid maxillary expansion (RME) might cause buccal displacement of anchor teeth. Dislocation of teeth outside their alveolar process can damage the periodontium; for this reason, maxillary expansion using deciduous teeth as anchorage in the mixed dentition might be suggested. The aim of this study was to compare changes of buccal bone plate thickness on the maxillary permanent first molars after RME in the mixed and permanent dentitions with different types of anchorage. METHODS: Two groups of patients were evaluated with cone-beam computed tomography before and after RME. Group E (21 patients) underwent RME using deciduous teeth as anchorage; group 6 (16 patients) underwent RME using permanent teeth as anchorage. The Wilcoxon test was used to compare changes between the time points in the same groups, and the Mann-Whitney U test was used to compare differences between the groups. RESULTS: In group E, generally, no statistically significant reduction was found in buccal bone plate thickness between the time points. In group 6, most measurements showed significant reductions in buccal bone plate thickness (P <0.05) between the time points, with a maximum decrease of 1.25 mm. CONCLUSIONS: RME in the mixed dentition with the appliance anchored to deciduous teeth did not reduce the buccal bone plate thickness of the maxillary permanent first molars, except for the mesial roots on both sides. RME in the permanent dentition caused a reduction of the buccal bone plate thickness of the maxillary permanent first molars when they were used as anchorage in the permanent dentition.

Osteo-regeneration personalized for children by rapid maxillary expansion: an imaging study based on synchrotron radiation microtomography.

BACKGROUND: Personalized maxillary expansion procedure has been proposed to correct maxillary transversal deficiency; different protocols of stem cell activation have been suggested and rapid maxillary expansion (RME) is the most commonly used among clinicians. The present study aimed to quantify in three-dimensions (3D) the osteo-regeneration of the midpalatal suture in children submitted to RME. METHODS: Three patients (mean age 8.3 ± 0.9 years) were enrolled in the study to preform biopsy of midpalatal suture. Two patients (subjects 1 and 2) were subjected to RME before biopsy. The third patient did not need maxillary expansion treatment and was enrolled as control (subject 3). Midpalatal suture samples were harvested 7 days after RME in subject 1, and 30 days after RME in subject 2. The samples were harvested with the clinical aim to remove bone for the supernumerary tooth extraction. When possible, maxillary suture and bone margins were both included in the sample. All the biopsies were evaluated by complementary imaging techniques, namely Synchrotron Radiation-based X-ray microtomography (microCT) and comparative light and electron microscopy. RESULTS: In agreement with microscopy, it was detected by microCT a relevant amount of newly formed bone both 7 days and 30 days after RME, with bone growth and a progressive mineralization, even if still immature respect to the control, also 30 days after RME. Interestingly, the microCT showed that the new bone was strongly connected and cross-linked, without a preferential orientation perpendicular to the suture's long axis (previously hypothesized by histology), but with well-organized and rather isotropic 3D trabeculae. CONCLUSIONS: The microCT imaging revealed, for the first time to the authors' knowledge, the 3D bone regeneration in children submitted to RME.

Digital Dynamic 3D Monitoring of Lower Incisors Intrusion in Lingual Orthodontics.

OBJECTIVE: The aim of the present study is to propose a 3-dimensional evaluation of lower intrusion obtained with lingual orthodontics considering not only the crowns but also dental roots. METHODS: 9 adult patients underwent fixed lingual orthodontic treatment with i-TTя lingual brackets system for the correction of crowding in the lower arch associated with a deep overbite. Initial records, consisting of photos, CBCTs and intraoral scans were collected. Threshold segmentation of the CBCT was performed to generate a three-dimensional virtual model of each the teeth of the lower arch, superimposed with the crown of the same teeth obtained by intraoral scan models to generate a complete set of digital composite lower arch The same procedure was performed to monitor one key step of the i-TTЯ technique consisting in lower incisors intrusion (T2). T1-T2 three-dimensional superimposition and color displacement maps were generated to measure and evaluate the movements obtained at the lower arch. RESULTS: The root displacement of the incisors during their intrusion in the early stage was totally "bone-safe" in the 88.9% (8 of 9) of the cases observed. No significant extrusion of the premolars used as anchorage unit was measured. CONCLUSION: This method has proved to be an accurate and reliable approach to dynamically visualize the 3-dimensional positions of the teeth, including their roots, with no additional radiation for in-progress treatment monitoring. The 3-dimensional evaluation showed that the employed lingual appliance allowed to obtain significant lower incisors intrusion with negligible undesired extrusion of premolars employed as anchorage teeth.

Digital evaluation of nasal changes induced by rapid maxillary expansion with different anchorage and appliance design.

BACKGROUND: Scientific evidence showed that rapid maxillary expansion (RME) affects naso-maxillary complex, increasing nasal width and volume. This study aimed to evaluate nasal changes induced by rapid maxillary expansion with different anchorage and appliance design by using low dose and cone beam computed tomography. METHODS: A total of 44 patients (20 males, mean age 8y 8 m ± 1y 2 m; 24 females mean age 8y 2 m ± 1y 4 m) were included in the investigation and divided into three groups according to the appliance: Hyrax-type expander anchored to permanent teeth, modified Hyrax-type expander anchored to deciduous teeth, modified Haas-type expander anchored to deciduous teeth. Maxillary expansion was performed until overcorrection and the expander was passively kept in situ for 7 months at least. All patients had three-dimensional imaging before expansion (T0) and after the retention period (T1). Nasal floor width, nasal wall width, maxillary inter-molar width were measured by means of Mimics software. The paired sample t-test was employed to assess the significance of the differences between the time points; the analysis of variance test (ANOVA) was used to compare differences between groups. RESULTS: The statistical analysis revealed significant differences between T0 and T1 for each recorded measurement in each group; no significant differences were found by comparing groups. CONCLUSIONS: Rapid maxillary expansion produces a significant skeletal transverse expansion of nasal region in growing patients. No significant differences in nasal effects are expected when the appliance is anchored onto deciduous teeth, with or without the palatal acrylic coverage.