In situ Tracking of Exoenzyme Activity Using Droplet Luminescence Concentrators for Ratiometric Detection of Bacteria.

We demonstrate a novel, rapid, and cost-effective biosensing paradigm that is based on an in situ visualization of bacterial exoenzyme activity using biphasic Janus emulsion droplets. Sensitization of the droplets toward dominant extracellular enzymes of bacterial pathogens is realized via selective functionalization of one hemisphere of Janus droplets with enzyme-cleavable surfactants. Surfactant cleavage results in an interfacial tension increase at the respective droplet interface, which readily transduces into a microscopically detectable change of the internal droplet morphologies. A macroscopic fluorescence read-out of such morphological transitions is obtained via ratiometrically recording the angle-dependent anisotropic emission signatures of perylene-containing droplets from two different angles. The optical read-out method facilitates detection of marginal morphological responses of polydisperse droplet samples that can be easily produced in any environment. The performance of Janus droplets as powerful optical transducers and signal amplifiers is highlighted by rapid (<4 h) and cost-effective antibody and DNA-free identification of three major foodborne pathogens, with detection thresholds of below 10 CFU mL-1 for Salmonella and <102 to 103 CFU mL-1 for Listeria and Escherichia coli.

Photocharging of Carbon Nitride Thin Films for Controllable Manipulation of Droplet Force Gradient Sensors.

Intentional generation, amplification, and discharging of chemical gradients is central to many nano- and micromanipulative technologies. We describe a straightforward strategy to direct chemical gradients inside a solution via local photoelectric surface charging of organic semiconducting thin films. We observed that the irradiation of carbon nitride thin films with ultraviolet light generates local and sustained surface charges in illuminated regions, inducing chemical gradients in adjacent solutions via charge-selective immobilization of surfactants onto the substrate. We studied these gradients using droplet force gradient sensors, complex emulsions with simultaneous and independent responsive modalities to transduce information on transient gradients in temperature, chemistry, and concentration via tilting, morphological reconfiguration, and chemotaxis. Fine control over the interaction between local, photoelectrically patterned, semiconducting carbon nitride thin films and their environment yields a new method to design chemomechanically responsive materials, potentially applicable to micromanipulative technologies including microfluidics, lab-on-a-chip devices, soft robotics, biochemical assays, and the sorting of colloids and cells.

Multicompartment calcium alginate microreactors to reduce substrate inhibition in enzyme cascade reactions.

The formation of macromolecularly enriched condensates through associative or segregative liquid-liquid phase separation phenomena is known to play a central role in controlling various cellular functions in nature. The potential to spatially and temporally modulate multistep chemical reactions and pathways has inspired the use of phase-separated systems for the development of various synthetic colloidal micro- and nanoreactor systems. Here, we report a rational and synthetically minimal design strategy to emulate intended spatiotemporal functions in morphologically intricate and structurally defined calcium alginate hydrogel microreactors possessing multicompartmentalized internal architectures. Specifically, we implement a thermal phase separation protocol to achieve fine-control over liquid-liquid phase separation inside complex aqueous emulsion droplet templates that are loaded with hydrophilic polymer mixtures. Subsequent gelation of alginate-containing droplet templates using a novel freeze-thaw approach that can be applied to both scalable batch production or more precise microfluidic methods yields particle replicas, in which subcompartmentalized architectures can be retained. Larger active components can be enriched in the internal compartments due to their preferential solubility, and we show that selective sequestration of enzymes serves to create desired microenvironments to control and tune the reaction kinetics of a multistep enzyme cascade by reducing their mutual interference. This demonstration of mitigating substrate inhibition that is based primarily on optimizing the multicompartmentalized hydrogel particle morphology offers new opportunities for the simple and synthetically-minimal batch generation of hydrogel-based synthesis microreactors.

Responsive Janus droplets as modular sensory layers for the optical detection of bacteria.

The field of biosensor development is fueled by innovations in new functional transduction materials and technologies. Material innovations promise to extend current sensor hardware limitations, reduce analysis costs, and ensure broad application of sensor methods. Optical sensors are particularly attractive because they enable sensitive and noninvasive analyte detection in near real-time. Optical transducers convert physical, chemical, or biological events into detectable changes in fluorescence, refractive index, or spectroscopic shifts. Thus, in addition to sophisticated biochemical selector designs, smart transducers can improve signal transmission and amplification, thereby greatly facilitating the practical applicability of biosensors, which, to date, is often hampered by complications such as difficult replication of reproducible selector-analyte interactions within a uniform and consistent sensing area. In this context, stimuli-responsive and optically active Janus emulsions, which are dispersions of kinetically stabilized biphasic fluid droplets, have emerged as a novel triggerable material platform that provides as a versatile and cost-effective alternative for the generation of reproducible, highly sensitive, and modular optical sensing layers. The intrinsic and unprecedented chemical-morphological-optical coupling inside Janus droplets has facilitated optical signal transduction and amplification in various chemo- and biosensor paradigms, which include examples for the rapid and cost-effective detection of major foodborne pathogens. These initial demonstrations resulted in detection limits that rival the capabilities of current commercial platforms. This trend article aims to present a conceptual summary of these initial efforts and to provide a concise and comprehensive overview of the pivotal kinetic and thermodynamic principles that govern the ability of Janus droplets to sensitively and selectively respond to and interact with bacteria.

Dynamic In Situ Monitoring of the Salt Counter-ion Effect on Surfactant Effectiveness Using Reconfigurable Janus Emulsions.

A straightforward method for visualization and quantification of surfactant effectiveness within different electrolyte environments based on using reconfigurable Janus emulsions as novel optical probes is reported. More specifically, we investigated the effect of different types and concentrations of salt counter-ions on the surfactant surface excess of commercial ionic and non-ionic surfactants, namely sodium dodecyl sulfate (SDS) and Tween 80 via in situ monitoring the morphological reconfigurations of biphasic Janus emulsions comprising hydrocarbon and fluorocarbon oils. We find that significant variations in interfacial tensions of SDS-stabilized interfaces (up to 15 mN·m-1) can be evoked by titrating mono-, di-, and trivalent cationic counter-ions, which is coherent with the lyotropic (Hofmeister) series. In contrast, the salt counter-ion effect on the surfactant effectiveness was less pronounced for the non-ionic surfactant Tween 80 (∼3 mN·m-1). Our results reveal a facile in situ method for monitoring the central role of electrolyte type and concentration on surfactant effectiveness and, more broadly, illustrate that Janus emulsions serve as powerful optical probes to dynamically study the properties of surfactants at liquid interfaces. We demonstrate the utility of our findings for an electro-induced morphological reconfiguration of Janus droplet morphologies by dynamically tuning Cu2+ concentration in solution using an electrode setup. The latter provides a unique platform for liquid-phase, real-time, and continuous tuning of Janus droplet morphologies, e.g., for their application in sensing and dynamic optical device platforms.

Morphology-Dependent Aggregation-Induced Emission of Janus Emulsion Surfactants.

We report a novel stimuli-responsive fluorescent material platform that relies on an evocation of aggregation-induced emission (AIE) from tetraphenylethylene (TPE)-based surfactants localized at one hemisphere of biphasic micro-scale Janus emulsion droplets. Dynamic alterations in the available interfacial area were evoked through surfactant-induced dynamic changes of the internal droplet morphology that can be modulated as a function of the balance of interfacial tensions of the droplet constituent phases. Thus, by analogy with a Langmuir-Blodgett trough that enables selective concentration of surfactants at a liquid-gas interface, we demonstrate here a method for controllable modulation of the available interfacial area of surfactant-functionalized liquid-liquid interfaces. We show that a morphology-dependent alteration of the interfacial area can be used to evoke an optical signal, by selectively assembling synthesized TPE-based surfactants on the respective droplet interfaces. A trigger-induced increase in the concentration of TPE-based surfactants at the liquid-liquid interfaces results in an evocation of aggregation-induced emission (AIE), inducing an up to 3.9-fold increase in the measured emission intensity of the droplets.

Reversible morphology-resolved chemotactic actuation and motion of Janus emulsion droplets.

We report, for the first time, a chemotactic motion of emulsion droplets that can be controllably and reversibly altered. Our approach is based on using biphasic Janus emulsion droplets, where each phase responds differently to chemically induced interfacial tension gradients. By permanently breaking the symmetry of the droplets' geometry and composition, externally evoked gradients in surfactant concentration or effectiveness induce anisotropic Marangoni-type fluid flows adjacent to each of the two different exposed interfaces. Regulation of the competitive fluid convections then enables a controllable alteration of the speed and the direction of the droplets' chemotactic motion. Our findings provide insight into how compositional anisotropy can affect the chemotactic behavior of purely liquid-based microswimmers. This has implications for the design of smart and adaptive soft microrobots that can autonomously regulate their response to changes in their chemical environment by chemotactically moving towards or away from a certain target, such as a bacterium.

Actuation of Janus Emulsion Droplets via Optothermally Induced Marangoni Forces.

Microscale Janus emulsions represent a versatile material platform for dynamic refractive, reflective, and light-emitting optical components. Here, we present a mechanism for droplet actuation that exploits thermocapillarity. Using optically induced thermal gradients, an interfacial tension differential is generated across the surfactant-free internal capillary interface of Janus droplets. The interfacial tension differential causes droplet-internal Marangoni flows and a net torque, resulting in a predictable and controllable reorientation of the droplets. The effect can be quantitatively described with a simple model that balances gravitational and thermal torques. Occurring in small thermal gradients, these optothermally induced Marangoni dynamics represent a promising mechanism for controlling droplet-based micro-optical components.

Facile Monitoring of Water Hardness Levels Using Responsive Complex Emulsions.

The cationic content of water represents a major quality control parameter that needs to be followed by a rapid, on-site, and low-cost method. Herein, we report a novel method for a facile monitoring of the mineral content of drinking water by making use of responsive complex emulsions. The morphology of biphasic oil-in-water droplets solely depends on the balance of interfacial tensions, and we demonstrate that changes in the surfactant effectiveness, caused by variations in the mineral content inside the continuous phase, can be visualized by monitoring internal droplet shapes. An addition of metal cations can significantly influence the surfactant critical micelle concentrations and the surface excess values and therefore induce changes in the effectiveness of ionic surfactants, such as sodium dodecyl sulfate. The morphological response of Janus emulsions droplets was tracked via a simple microscopic setup. We observed that the extent of the droplet response was dependent on the salt concentration and valency, with divalent cations (responsive for water hardness), resulting in a more pronounced response. In this way, Ca2+ and Mg2+ levels could be quantitatively measured, which we showcased by determination of the mineral content of commercial water samples. The herein demonstrated device concept may provide a new alternative rapid monitoring of water hardness levels in a simple and cost-effective setup.

Synthesis of Polymer Janus Particles with Tunable Wettability Profiles as Potent Solid Surfactants to Promote Gas Delivery in Aqueous Reaction Media.

Janus particles exhibit a strong tendency to directionally assemble and segregate to interfaces and thus offer advantages as colloidal analogues of molecular surfactants to improve the stability of multiphasic mixtures. Investigation and application of the unique adsorption properties require synthetic procedures that enable careful design and reliable control over the particles' asymmetric chemistry and wettability profiles with high morphological uniformity across a sample. Herein, we report on a novel one-step synthetic approach for the generation of amphiphilic polymer Janus particles with highly uniform and tunable wettability contrasts, which is based on using reconfigurable bi-phasic Janus emulsions as versatile particle scaffolds. Two phase-separated acrylate oils were used as the constituent droplet phases and transformed into their solidified Janus particle replicas via UV-induced radical polymerization. Using Janus emulsions as particle precursors offers the advantage that their internal droplet geometry can be fine-tuned by changing the force balance of surface tensions acting at the individual interfaces via surfactants or the volume ratio of the constituent phases. In addition, preassembled functional surfactants at the droplet interfaces can be locked in position upon polymerization, which enables both access toward postfunctionalization reaction schemes and the generation of highly uniform Janus particles with adjustable wettability profiles. Depending on the particle morphology and wettability, their interfacial position can be adjusted, which allows us to stabilize either air bubbles-in-water or water droplets-in-air (liquid marbles). Motivated by the interfacial activity of the particles and particularly the longevity of the resulting particle-stabilized air-in-water bubbles, we explored their ability to promote the delivery of oxygen inside a liquid-phase reaction medium, namely, for the heterogeneous Au-NP-mediated catalytic oxidation of d-glucose. We observed a 2.2-fold increase in the reaction rate attributed to the increase of the local concentration of oxygen around catalysts, thus showcasing a new strategy to overcome the limited solubility of gases in aqueous reaction media.

Structurally Anisotropic Janus Particles with Tunable Amphiphilicity via Polymerization of Dynamic Complex Emulsions.

A facile one-step approach for the synthesis of physically and chemically anisotropic polymer particles with tunable size, shape, composition, wettability, and functionality is reported. Specifically, dynamically reconfigurable oil-in-water Janus emulsions containing photocurable hydrocarbon or fluorocarbon acrylate monomers as one of the droplet phases are used as structural templates to polymerize them into precision Janus particles with highly uniform anomalous morphologies including (hemi-) spheres, lenses, and bowls. During polymerization, each interface is exposed to a different chemical environment, yielding particles with an intrinsic Janus character that can be amplified via side-selective postfunctionalization. The fabrication method allows to start with various common emulsification techniques, thus generating particles in the range of 200 nm -150 µm, also at a technical scale. The anisotropic shape combined with the asymmetric wettability profile of the produced particles promotes their directed self-assembly into colloidal clusters as well as their directional alignment at fluid interfaces. We foresee the application of such Janus particles in technical emulsions or oil recovery, for the manufacturing of programmed self-assembled architectures, and for the engineering of microstructured interfaces.

Cascade communication in disordered networks of enzyme-loaded microdroplets.

A network of aqueous emulsion droplets that exhibits programmed and directional chemical inter-droplet communication is described. A non-reciprocal transfer of substrates between enzyme-containing aqueous emulsion droplets is realized by (biochemically) induced osmolarity gradients and concomitant concentration gradients are used to direct a multistep enzymatic cascade reaction across multiple droplets.

Responsive drop method: quantitative in situ determination of surfactant effectiveness using reconfigurable Janus emulsions.

Characterization of surfactant effectiveness and thus an evaluation of their performance in a wide range of emulsion technologies requires a precise determination of key parameters including their critical micelle concentrations as well as their ability to lower the surface tension at interfaces. In this study, we describe a new approach to quantify marginal variations in interfacial tension of surfactant stabilized fluid interfaces. The method is based on a unique chemical-morphological coupling inside bi-phasic oil-in-water Janus emulsions that undergo dynamic morphological transitions in response to changes in the surfactant type, concentration, ratio, and configuration. Variations in Janus droplet morphologies are readily monitored in situ using a simple side-view imaging setup, resulting in a fast, convenient, cost-effective, time-, and sample-saving technique for the characterization of classical surfactant systems. In addition, the reported method facilitates monitoring of triggered changes in surfactant effectiveness, e.g. invoked by external triggers, and thus proves particularly useful for the in situ analysis of stimuli-responsive surfactants and emulsions.

Temperature sensitive water-in-water emulsions.

A novel approach for a temperature-sensitive stabilization of water-in-water (W/W) emulsions is described. Specifically, we leveraged the thermal induced conformation change of tailored thermoresponsive block copolymers to reversibly stabilize and destabilize water-water interfaces. In addition, we investigated our approach to reversibly tune the reaction kinetics of enzymes compartmentalized within aqueous two-phase systems.

Responsive Janus and Cerberus emulsions via temperature-induced phase separation in aqueous polymer mixtures.

Complex aqueous emulsions represent a promising material platform for the encapsulation of cells, pharmaceuticals, or nutrients, for the fabrication of structured particles, as well as for mimicking the barrier-free compartmentalization of biomolecules found in living cells. Herein, we report a novel, simple, and scalable method of creating multicomponent aqueous droplets with highly uniform internal droplet morphologies that can be controllably altered after emulsification by making use of a thermal phase separation approach. Specifically, temperature-induced phase separation inside as-formed emulsion droplets comprising aqueous mixtures of two or more hydrophilic polymers allows for the generation of Janus and Cerberus emulsion droplets with adjustable internal morphologies that are solely controlled by a balance of interfacial tensions. We demonstrate our approach by applying both, microfluidic and scalable batch production, and present a detailed model study with predictive capabilities that enables fine-tuning and dynamically altering the droplet morphology as a function of types, molecular weights, and hydrophilicities of the polymers as well as the surfactant hydrophilic-lipophilic balance. The ability to rationally design complex aqueous emulsion droplets with previously unattainable dynamic control over their morphologies after emulsification entails the potential to design new responsive soft materials with implications for a variety of applications beyond encapsulation, including the design of complex adaptive and self-regulating materials, e.g. for chemical and biological sensing applications.

Cascade Kinetics in an Enzyme-Loaded Aqueous Two-Phase System.

Macromolecular crowding plays a critical role in the kinetics of enzymatic reactions. Dynamic compartmentalization of biological components in living cells due to liquid-liquid phase separation represents an important cell regulatory mechanism that can increase enzyme concentration locally and influence the diffusion of substrates. In the present study, we probed partitioning of two enzymes (horseradish-peroxidase and urate-oxidase) in a poly(ethylene glycol)-dextran aqueous two-phase system (ATPS) as a function of salt concentration and ion position in the Hofmeister series. Moreover, we investigated enzymatic cascade reactions and their kinetics within the ATPS, which revealed a strong influence of the ion hydration stemming from the background electrolyte on the partitioning coefficients of proteins following the Hofmeister series. As a result, we were able to realize cross-partitioning of two enzymes because of different protein net charges at a chosen pH. Our study reveals a strong dependency of the enzyme activity on the substrate type and crowding agent interaction on the final kinetics of enzymatic reactions in the ATPS and therefore provides substantial implications en route toward dynamic regulation of reactivity in synthetic protocells.

Rapid Detection of Salmonella enterica via Directional Emission from Carbohydrate-Functionalized Dynamic Double Emulsions.

Reliable early-stage detection of foodborne pathogens is a global public health challenge that requires new and improved sensing strategies. Here, we demonstrate that dynamically reconfigurable fluorescent double emulsions can function as highly responsive optical sensors for the rapid detection of carbohydrates fructose, glucose, mannose, and mannan, which are involved in many biological and pathogenic phenomena. The proposed detection strategy relies on reversible reactions between boronic acid surfactants and carbohydrates at the hydrocarbon/water interface leading to a dynamic reconfiguration of the droplet morphology, which alters the angular distribution of the droplet's fluorescent light emission. We exploit this unique chemical-morphological-optical coupling to detect Salmonella enterica, a type of bacteria with a well-known binding affinity for mannose. We further demonstrate an oriented immobilization of antibodies at the droplet interface to permit higher selectivity. Our demonstrations yield a new, inexpensive, robust, and generalizable sensing strategy that can help to facilitate the early detection of foodborne pathogens.

Janus Graphene: Scalable Self-Assembly and Solution-Phase Orthogonal Functionalization.

Orthogonal functionalization of 2D materials by selective assembly at interfaces provides opportunities to create new materials with transformative properties. Challenges remain in realizing controllable, scalable surface-selective, and orthogonal functionalization. Herein, dynamic covalent assembly is reported that directs the functionalization of graphene surfaces at liquid-liquid interfaces. This process allows facile addition and segregation of chemical functionalities to impart Janus characteristics to graphenes. Specifically, dynamic covalent functionalization is accomplished via Meisenheimer complexes produced by reactions of primary amines with pendant dinitroaromatics attached to graphenes. Janus graphenes are demonstrated to be powerful surfactants that organize at water/organic, water/fluorocarbon, and organic/fluorocarbon liquid interfaces. This approach provides general access to the creation of diverse surfactant materials and promising building blocks for 2D materials.

Waveguide-based chemo- and biosensors: complex emulsions for the detection of caffeine and proteins.

We report on a new modular sensing approach in which complex emulsions serve as efficient transducers in optical evanescent field-based sensing devices. Specifically, we leverage the tunable refractive index upon chemically triggered changes in droplet morphology or orientation. Variations in the optical coupling result in readily detectable changes in the light transmitted from a waveguide.

Morphology-Dependent Luminescence in Complex Liquid Colloids.

Complex liquid colloids hold great promise as transducers in sensing applications as a result of their tunable morphology and intrinsic optical properties. Herein, we introduce meta-amino substituted green fluorescence protein chromophore (GFPc) surfactants that localize at the organic-water interface of complex multiphase liquid colloids. The meta-amino GFPc exhibits hydrogen-bonding (HB) mediated fluorescence quenching, and are nearly nonemissive in the presence of protic solvents. We demonstrate morphology-dependent fluorescence of complex liquid colloids and investigate the interplay between GFPc surfactants and other simple surfactants. This environmentally responsive surfactant allows us to observe morphological changes of complex emulsions in randomized orientations. We demonstrate utility with an enzyme activity based fluorescence "turn-ON" scheme. The latter employs an oligopeptide-linked GFPc that functions as both a surfactant and trypsin target. The cleavage of hydrophilic peptide results in a morphology change and ultimately a fluorescence turn-on. Fluorescent complex colloids represent a new approach for biosensing in liquid environments.