RESUMO
As global freshwater shortages worsen, solar steam generation (SSG) emerges as a promising, eco-friendly, and cost-effective solution for water purification. However, widespread SSG implementation requires efficient photothermal materials and solar evaporators that integrate enhanced light-to-heat conversion, rapid water transportation, and optimal thermal management. This study investigates using nonoxidized graphene flakes (NOGF) with negligible defects as photothermal materials capable of absorbing over 98% of sunlight. By combining NOGF with cellulose nanofibers (CNF) through bidirectional freeze casting, we created a vertically and radially aligned solar evaporator. The hybrid aerogel exhibited exceptional solar absorption, efficient solar-to-thermal conversion, and improved surface wettability. Inspired by tree structures, our design ensures rapid water supply while minimizing heat loss. With low NOGF content (â¼10.0%), the NOGF/CNF aerogel achieves a solar steam generation rate of 2.39 kg m-2 h-1 with an energy conversion efficiency of 93.7% under 1-sun illumination, promising applications in seawater desalination and wastewater purification.
RESUMO
I-III-VI quantum dots (QDs) have gained widespread attention owing to their significant advantages of non-toxicity, large structural tolerance, and efficient photoluminescence potential. However, the disbalance of reactivity between the elements will result in undesired products and compromised optical properties. Reducing the activity of highly reactive group IB elements is the most common approach, but it will reduce the overall reactivity and lead to a wide dispersion of QD sizes. In this study, we propose a method to improve the overall reactivity of the reaction system using the highly active IIIA precursor InI3, which triggers rapid nucleation and promotes the formation of Ag(In,Ga)S2 (AIGS) QDs, resulting in monodisperse particle size distributions and a significantly improved photoluminescence quantum yield (PLQY) (from 12% to 72%). Furthermore, narrow band edge emission is realized by coating a gallium sulfide (GaSx) shell on the basis of obtaining high-quality AIGS QDs. The core/shell QDs exhibit a 90% PLQY with a full width at half maximum (FWHM) of only 31 nm at 530 nm. This study provides a viable design strategy to synthesize monodisperse AIGS QDs with a narrow peak width and efficient luminescence, promoting the application of AIGS QDs in the field of luminescent displays.
RESUMO
Artificial moiré superlattices created by stacking 2D crystals have emerged as a powerful platform with unprecedented material-engineering capabilities. While moiré superlattices are reported to host a number of novel quantum states, their potential for spintronic applications remains largely unexplored. Here, the effective manipulation of spin-orbit torque (SOT) is demonstrated using moiré superlattices in ferromagnetic devices comprised of twisted WS2/WS2 homobilayer (t-WS2) and CoFe/Pt thin films by altering twisting angle (θ) and gate voltage. Notably, a substantial enhancement of up to 44.5% is observed in SOT conductivity at θ ≈ 8.3°. Furthermore, compared to the WS2 monolayer and untwisted WS2/WS2 bilayers, the moiré superlattices in t-WS2 enable a greater gate-voltage tunability of SOT conductivity. These results are related to the generation of the interfacial moiré magnetic field by the real-space Berry phase in moiré superlattices, which modulates the absorption of the spin-Hall current arising from Pt through the magnetic proximity effect. This study highlights the moiré physics as a new building block for designing enhanced spintronic devices.
RESUMO
Polarized light detection can effectively identify the difference between the polarization information on the target and the background, which is of great significance for detection in complex natural environments and/or extreme weather. Generally, polarized light detection inevitably relies on anisotropic structures of photodetector devices, while organic-inorganic hybrid perovskites are ideal for anisotropic patterning due to their simple and efficient preparation by solution method. Compared to patterned thin films, patterned arrays of aligned one-dimensional (1D) perovskite nanowires (PNWAs) have fewer grain boundaries and lower defect densities, making them well suited for high-performance polarization-sensitive photodetectors. Here, we fabricated PNWAs crystallographically aligned with variable line widths and alignment densities employing CD-ROM and DVD-ROM grating pattern template-confined growth (TCG) methods. The photodetectors constructed from MAPbI3 PNWAs achieved responsivity of 35.01 A/W, detectivity of 6.85 × 1013 Jones, and fast response with a rise time of 172 µs and fall time of 114 µs. They were successfully applied to high-performance polarization detection with a polarization ratio of 1.81, potentially applicable in polarized light detection systems.
RESUMO
Objective: Our recently published study discovers that exosomal microRNA (miR)-186-5p promotes vascular smooth muscle cell viability and invasion to facilitate atherosclerosis. This research aimed to explore the prognostic implication of serum exosomal miR-186-5p in acute myocardial infarction (AMI) patients receiving percutaneous coronary intervention (PCI). Methods: One hundred and fifty AMI patients receiving PCI and 50 healthy controls (HCs) were screened. Serum exosomal miR-186-5p was detected by reverse transcriptase-quantitative polymerase chain reaction assay in AMI patients at admission and after PCI, as well as in HCs after enrollment. Major adverse cardiac events (MACE) were recorded during follow-up in AMI patients receiving PCI. Results: Serum exosomal miR-186-5p was raised in AMI patients vs. HCs (P < 0.001). Besides, serum exosomal miR-186-5p was positively linked to body mass index (P = 0.048), serum creatinine (P = 0.021), total cholesterol (P = 0.029), and C-reactive protein (P = 0.018); while it was reversely linked with estimated glomerular filtration rate (P = 0.023) in AMI patients. Interestingly, serum exosomal miR-186-5p was correlated with the diagnosis of ST-segment elevation myocardial infarction (P = 0.034). Notably, serum exosomal miR-186-5p was decreased after PCI vs. at admission (P < 0.001). The 6-, 12-, 18-, and 24-month accumulating MACE rates were 4.5%, 8.9%, 14.8%, and 14.8% in AMI patients. Furthermore, serum exosomal miR-186-5p ≥3.39 (maximum value in HCs) after PCI (P = 0.021) and its decrement percentage
RESUMO
Perovskite quantum dots (PeQDs) have great application prospects in fields such as displays and solar cells due to their adjustable band gap, high absorption coefficient, high carrier mobility, and solution processability. However, the ionic crystal characteristic of PeQDs and their surface ligands have led to problems such as solvent sensitivity, poor crystal stability, and difficulty in adjusting the photoelectric properties, which are challenges in high-quality PeQDs. Here, to solve the problem of fluorescence degradation caused by phase change and loss of surface ligands during the purification process of CsPbI3 QDs, this work develops a purification strategy that finely regulates the polarity of the purification solvent, to obtain high-purity perovskite. This strategy can tune the surface ligand concentration and optoelectronic properties while maintaining the crystal stability. The optimized purification process enables the quantum dots to maintain the same level of luminescence performance as the original solution (PLQY is â¼90%). Meanwhile, the electrical properties are improved to significantly increase the exciton recombination rate under an electrical drive. Finally, a highly efficient QLED with an external quantum efficiency of exceeding 23% can be achieved. This scheme for fine purification of CsPbI3 QDs will provide some inspiration for the development of efficient PeQDs and the realization of high-performance optoelectronic devices.
RESUMO
Fiber light-emitting diodes (Fi-LEDs), which can be used for wearable lighting and display devices, are one of the key components for fiber/textile electronics. However, there exist a number of impediments to overcome on device fabrication with fiber-like substrates, as well as on device encapsulations. Here, we uniformly grew all-inorganic perovskite quantum wire arrays by filling high-density alumina nanopores on the surface of Al fibers with a dip-coating process. With a two-step evaporation method to coat a surrounding transporting layer and semitransparent electrode, we successfully fabricated full-color Fi-LEDs with emission peaks at 625 nanometers (red), 512 nanometers (green), and 490 nanometers (sky-blue), respectively. Intriguingly, additional polydimethylsiloxane packaging helps instill the mechanical bendability, stretchability, and waterproof feature of Fi-LEDs. The plasticity of Al fiber also allows the one-dimensional architecture Fi-LED to be shaped and constructed for two-dimensional or even three-dimensional architectures, opening up a new vista for advanced lighting with unconventional formfactors.
RESUMO
White light-emitting diodes (WLEDs) are the key components in the next-generation lighting and display devices. The inherent toxicity of Cd/Pb-based quantum dots (QDs) limits the further application in WLEDs. Recently, more attention is focused on eco-friendly QDs and their WLEDs, especially the phosphor-free WLEDs based on mono-component, which profits from bias-insensitive color stability. However, the imbalanced carrier distribution between red-green-blue luminescent centers, even the absence of a certain luminescent center, hinders their balanced and stable photoluminescence/electroluminescence (PL/EL). Here, an In3+-doped strategy in Zn-Cu-Ga-S@ZnS QDs is first proposed, and the balanced carrier distribution is realized by non-equivalent substitution and In3+ doping concentration modulation. The alleviation of the green emitter by the In3+-related red emitter and the compensation of blue emitter by the Zn-related electronic states contribute to the balanced red-green-blue emitting with high PL quantum yield (PLQY) of 95.3% and long lifetime (T90) of over 1100 h in atmospheric conditions. Thus, the In3+-doped WLEDs can achieve exceedingly slight proportional variations between red-green-blue EL intensity over time (∆CIE = (0.007, 0.009)), and high champion CRI of 94.9. This study proposes a single-component QD with balanced and stable red-green-blue PL/EL spectrum, meeting the requirements of lighting and display.
RESUMO
Developing low-power FETs holds significant importance in advancing logic circuits, especially as the feature size of MOSFETs approaches sub-10 nanometers. However, this has been restricted by the thermionic limitation of SS, which is limited to 60 mV per decade at room temperature. Herein, we proposed a strategy that utilizes 2D semiconductors with an isolated-band feature as channels to realize sub-thermionic SS in MOSFETs. Through high-throughput calculations, we established a guiding principle that combines the atomic structure and orbital interaction to identify their sub-thermionic transport potential. This guides us to screen 192 candidates from the 2D material database comprising 1608 systems. Additionally, the physical relationship between the sub-thermionic transport performances and electronic structures is further revealed, which enables us to predict 15 systems with promising device performances for low-power applications with supply voltage below 0.5 V. This work opens a new way for the low-power electronics based on 2D materials and would inspire extensive interests in the experimental exploration of intrinsic steep-slope MOSFETs.
RESUMO
Efficient electromagnetic waves (EMWs) absorbing materials play a vital role in the electronic era. In traditional research on microwave absorbing (MA) materials, the synergistic modulation of material dispersion and structural dispersion of EMWs by incorporating multi-scale effects has frequently been overlooked, resulting in an untapped absorption potential. In this study, the material dispersion customization method based on biomass carbon is determined by quantitative analysis. The study carries out thermodynamic modulation of carbon skeleton, micro-nano porous engineering, and phosphorus atom donor doping in turn. The dielectric properties are improved step by step. In terms of structural dispersion design, inspired by the theory of antenna reciprocity, a Vivaldi antenna-like absorber is innovatively proposed. With the effective combination of material dispersion and structural dispersion engineering by 3D printing technology, the ultra-wideband absorption of 36.8 GHz and the angular stability of close to 60 ° under dual polarization are successfully realized. The work breaks the deadlock of mutual constraints between wave impedance and attenuation rate through the dispersion modulation methods on multiple scales, unlocking the potential for designing next-generation broadband wide-angle absorbers.
RESUMO
Alzheimer's disease (AD) is a progressive and degenerative neurological disease characterized by the deterioration of cognitive functions. While a definitive cure and optimal medication to impede disease progression are currently unavailable, a plethora of studies have highlighted the potential advantages of exercise rehabilitation for managing this condition. Those studies show that exercise rehabilitation can enhance cognitive function and improve the quality of life for individuals affected by AD. Therefore, exercise rehabilitation has been regarded as one of the most important strategies for managing patients with AD. Herein, we provide a comprehensive analysis of the currently available findings on exercise rehabilitation in patients with AD, with a focus on the exercise types which have shown efficacy when implemented alone or combined with other treatment methods, as well as the potential mechanisms underlying these positive effects. Specifically, we explain how exercise may improve the brain microenvironment and neuronal plasticity. In conclusion, exercise is a cost-effective intervention to enhance cognitive performance and improve quality of life in patients with mild to moderate cognitive dysfunction. Therefore, it can potentially become both a physical activity and a tailored intervention. This review may aid the development of more effective and individualized treatment strategies to address the challenges imposed by this debilitating disease, especially in low- and middle-income countries.
RESUMO
Multicolor afterglow patterns with transparent and traceless features are important for the exploration of new functionalities and applications. Herein, we report a direct in situ patterning technique for fabricating afterglow carbon dots (CDs) based on laser direct writing (LDW) for the first time. We explore a facile step-scanning method that reduces the heat-affected zone and avoids uneven heating, thus producing a fine-resolution afterglow CD pattern with a minimum line width of 80 µm. Unlike previous LDW-induced luminescence patterns, the patterned CD films are traceless and transparent, which is mainly attributed to a uniform heat distribution and gentle temperature rise process. Interestingly, by regulating the laser parameters and CD precursors, an increased carbonization and oxidation degree of CDs could be obtained, thus enabling time-dependent, tunable afterglow colors from blue to red. In addition, we demonstrate their potential applications in the in situ fabrication of flexible and stretchable optoelectronics.
RESUMO
Display technology is being revolutionized by cutting-edge transparent displays that can provide visual information on the screen while allowing the surrounding environment to be visible. In this report, a new method is proposed for patterning displays based on perovskite quantum dots (PQDs) on glass surfaces. A glass substrate with a polyvinylidene fluoride (PVDF) constraint layer is patterned using laser-induced plasma etching, and then a PQDs film is spin-coated on the etched sample. The PQDs pattern on the glass substrate is obtained after peeling off the PVDF constraint layer. The thickness of the film is obtained by carrying out simulations. The plasma output from different metal targets is recorded and analyzed to select the most suitable parameters and materials for improvement of the patterning accuracy. The transparent pattern display of PQDs is realized with an accuracy of 10-20 µm and a burial depth of about 1 µm. This method allows PQDs to be encapsulated under the substrate surface, which decreases the susceptibility of environmental impact. Additionally, encapsulation prevents the quantum dots from leaking out and causing environmental pollution. The proposed method has potential in the design of transparent displays and anti-counterfeiting applications.
RESUMO
Our previous study finds that exosomal microRNA (miR)-186-5p promotes viability and invasion of vascular smooth muscle cells to accelerate atherosclerosis via inactivating phosphoinositide 3 kinase/protein kinase B/mammalian target of rapamycin pathway. Subsequently, this study aimed to identify the linkage of serum exosomal miR-186-5p with clinical features and major adverse cardiovascular events (MACE) in coronary heart disease (CHD) patients. Serum exosomal miR-186-5p was quantified in 175 CHD patients and 50 healthy controls (HCs) via reverse transcription quantitative polymerase chain reaction. Our study revealed that serum exosomal miR-186-5p was enhanced in CHD patients vs. HCs (P < 0.001). In CHD patients, serum exosomal miR-186-5p was positively correlated with total cholesterol (P = 0.002) and low-density lipoprotein cholesterol (P = 0.003). Elevated serum exosomal miR-186-5p was linked with increased Gensini score (P = 0.028) and stenosis degree categorized by the Gensini score (P = 0.018). Regarding MACE, the 1-year and 2-year accumulating MACE rate was 6.6% and 15.6%, respectively. Serum exosomal miR-186-5p was elevated in CHD patients with MACE vs. those without (P = 0.042). By Kaplan-Meier curves and log-rank analyses, serum exosomal miR-186-5p > 1.000 (P = 0.404) and > 1.610 (P = 0.328) was not related to accumulating MACE. While serum exosomal miR-186-5p > 3.390 exhibited a correlative trend with increased accumulating MACE, but not achieving statistical significance (P = 0.071). The 1-year and 2-year accumulating MACE rate of patients with serum exosomal miR-186-5p > 3.390 was 11.5% and 21.5%, respectively; while the rate was 3.3% and 11.5% in patients with serum exosomal miR-186-5p ≤ 3.390, accordingly. Conclusively, serum exosomal miR-186-5p positively associates with lipid level, coronary stenosis degree, and the risk of MACE in CHD patients.
Assuntos
Estenose Coronária , MicroRNAs , Humanos , Fosfatidilinositol 3-Quinases , Estenose Coronária/complicações , Estenose Coronária/genética , MicroRNAs/genética , Colesterol , LipídeosRESUMO
Controlling the dynamic processes, such as generation, separation, transport, and recombination, of photoexcited carriers in a semiconductor is foundational in the design of various devices for optoelectronic applications. One may imagine that if different processes can be manipulated in one single device and thus generate useful signals, a multifunctional device can be realized, and the toolbox for integrated optoelectronics will be expanded. Here, we revealed that in a graphene/ZnTe/graphene van der Waals (vdW) heterostructure, the carriers can be generated by illumination from visible to infrared frequencies, and thus, the detected spectrum range extends to the communication band, well beyond the band gap of ZnTe (2.26 eV). More importantly, we are able to control the competition between separation and recombination of the photoexcited carriers by an electric bias along the thickness-defined channel of the ZnTe flake: as the bias increases, the photodetecting performance, e.g. response speed and photocurrent, are improved due to the efficient separation of carriers; synchronously, the photoluminescence (PL) intensity decreases and even switches off due to the suppressed recombination process. The ZnTe-based vdW heterostructure device thus integrates both photodetection and PL switching functions by manipulating the generation, separation, transport, and recombination of carriers, which may inspire the design of the next generation of miniaturized optoelectronic devices based on the vdW heterostructures made by various thin flakes.
RESUMO
I-III-VI quantum dots (QDs) and derivatives (I, III, and VI are Ag+/Cu+, Ga3+/In3+, and S2-/Se2-, respectively) are the ideal candidates to replace II-VI (e.g., CdSe) and perovskite QDs due to their nontoxicity, pure color, high photoluminescence quantum yield (PLQY), and full visible coverage. However, the chaotic cation alignment in multielement systems can easily lead to the formation of multiple surface vacancies, highlighted as VI and VVI, leading to nonradiative recombination and nonequilibrium carrier distribution, which severely limit the performance improvement of materials and devices. Here, based on Zn-Ag-In-Ga-S QDs, we construct an ultrathin indium sulfide shell that can passivate electron vacancies and convert donor/acceptor level concentrations. The optimized In-rich 2-layer indium sulfide structure not only enhances the radiative recombination rate by preventing further VS formation but also achieves the typical DAP emission enhancement, achieving a significant increase in PLQY to 86.2% at 628 nm. Moreover, the optimized structure can mitigate the lattice distortion and make the carrier distribution in the interior of the QDs more balanced. On this basis, red QD light-emitting diodes (QLEDs) with the highest external quantum efficiency (EQE; 5.32%) to date were obtained, providing a novel scheme for improving I-III-VI QD-based QLED efficiency.
RESUMO
X-ray imaging based on a single gray level shows visual blind parts and affects accurate judgment in some situations. Color-cognized x-ray imaging will boost the recognition capability, which has not yet been reported. Here, we propose a quartz-assisted chromatic x-ray imaging model based on metal halide nanocrystal (NC) stacked scintillators. Mutually inactive (BA)2PbBr4:Mn and Cs3Cu2I5:Tl enable x-ray energy- or density-dependent radioluminescence (RL) color variation. The upper scintillator light yield and the bottom scintillator transmittance are enhanced by elaborate in situ passivation of phenethylamine bromide and NC orientation regulation, respectively. Imaging targets with different densities are distinguished on RL spectra, and the color coordinates shift linearly on CIE 1931. An algorithm balances the image details of different gray areas and enhances the visual perception by color filling. This work provides color recognition between objects with different densities and takes a step toward chromatic x-ray imaging applied to practical scenarios.
RESUMO
An introduction to the Nanoscale themed collection on halide perovskite nanomaterials for optoelectronic applications, featuring a variety of articles that highlight the latest developments to address ongoing challenges in the field.
RESUMO
Metal halide perovskites have shown great promise as a potential candidate for next-generation solid state lighting and display technologies. However, a generic organic ligand-free and antisolvent-free solution method to fabricate highly efficient full-color perovskite light-emitting diodes has not been realized. Herein, by utilizing porous alumina membranes with ultra-small pore size as templates, we have successfully fabricated crystalline all-inorganic perovskite quantum wire arrays with ultrahigh density and excellent uniformity, using a generic organic ligand-free and anti-solvent-free solution method. The quantum confinement effect, in conjunction with the high light out-coupling efficiency, results in high photoluminescence quantum yield for blue, sky-blue, green and pure-red perovskite quantum wires arrays. Consequently, blue, sky-blue, green and pure-red LED devices with spectrally stable electroluminescence have been successfully fabricated, demonstrating external quantum efficiencies of 12.41%, 16.49%, 26.09% and 9.97%, respectively, after introducing a dual-functional small molecule, which serves as surface passivation and hole transporting layer, and a halide vacancy healing agent.
RESUMO
Solution-processed organic-inorganic hybrid perovskite polycrystalline thick films have shown great potential in X-ray detection. However, the preparation of compact perovskite thick films with large area is still challenging due to the limitation of feasible ink formulation and pinholes caused by solvent volatilization. Post-treatment and hot-pressing are usually involved to improve the film quality, which is however unsuitable for subsequent integration. In this work, a homogeneous bridging strategy is developed to prepare compact perovskite films directly. A stable perovskite slurry with suitable viscosity consisting of undissolved grains and supersaturated solution is formed by adding a weak coordination solvent to the pre-synthesized microcrystalline powders. Small perovskite grains in situ grow from the saturated solution during the annealing, filling the pinholes and connecting the surrounding original grains. As a result, large-area perovskite thick film with tight grain arrangement and ultralow current drift is blade-coated to achieve X-ray imaging. The optimal device displays an impressive mobility-lifetime product of 2.2 × 10-3 cm2 V-1 and a champion ratio of sensitivity to the dark current density of 2.23 × 1011 µC Gyair -1 A-1 . This work provides a simple and effective route to prepare high-quality perovskite thick films, which is instructive for the development of perovskite-based X-ray flat-panel detectors.