Size-Controllable and pH-Sensitive Whey Protein Microgels as High-Performance Aqueous Biolubricants.

Developing efficient aqueous biolubricants has become a significant focus of research due to their prevalence in biotribological contacts and enormous potential in soft matter applications. In this study, size-controllable, pH-sensitive whey protein microgels were prepared using a water-in-water emulsion template method from protein-polysaccharide phase separation. The granular hydrogel from the protein microgels exhibited superior lubricity, obtaining 2.7-fold and 1.7-fold reductions in coefficient of friction (µ) compared to native protein and human saliva (µ = 0.30 compared to 0.81 and 0.52, respectively). The microgels also exhibited outstanding load-bearing capabilities, sustaining lubrication under normal forces up to 5 N. Microgels with a smaller size (1 µm) demonstrated better lubricating performance than 6 and 20 µm microgels. The exceptional lubricity was from a synergistic effect of the ball-bearing mechanism and the hydration state of the microgels. Particularly at pH 7.4, the hydration layer surrounding highly negative charges contributed to the electrostatic repulsion among the swollen microgels, leading to an improved buffer ability to separate contact surfaces and effective rolling behavior. Such pH-dependent repulsion was evidenced using a surface forces apparatus that the adhesion between the whey protein-coated surfaces and protein-mica surfaces decreased from 4.49 to 0.97 mN/m and from 7.89 to 0.36 mN/m, respectively, with pH increasing from the isoelectronic point to 7.4. Our findings fundamentally elucidated the tribo-rheological properties and lubrication mechanisms of the whey protein microgels with excellent biocompatibility and environmental responsiveness, offering novel insights for their food and biomedical applications requiring aqueous biolubrication.

Molecular Interaction Mechanisms Between Lubricant-Infused Slippery Surfaces and Mussel-Inspired Polydopamine Adhesive and DOPA Moiety.

Lubricant-infused slippery surfaces have recently emerged as promising antifouling coatings, showing potential against proteins, cells, and marine mussels. However, a comprehensive understanding of the molecular binding behaviors and interaction strength of foulants to these surfaces is lacking. In this work, mussel-inspired chemistry based on catechol-containing chemicals including 3,4-dihydroxyphenylalanine (DOPA) and polydopamine (PDA) is employed to investigate the antifouling performance and repellence mechanisms of fluorinated-based slippery surface, and the correlated interaction mechanisms are probed using atomic force microscopy (AFM). Intermolecular force measurements and deposition experiments between PDA and the surface reveal the ability of lubricant film to inhibit the contact of PDA particles with the substrate. Moreover, the binding mechanisms and bond dissociation energy between a single DOPA moiety and the lubricant-infused slippery surface are quantitatively investigated employing single-molecule force spectroscopy based on AFM (SM-AFM), which reveal that the infused lubricant layer can remarkably influence the dissociation forces and weaken the binding strength between DOPA and underneath per-fluorinated monolayer surface. This work provides new nanomechanical insights into the fundamental antifouling mechanisms of the lubricant-infused slippery surfaces against mussel-derived adhesive chemicals, with important implications for the design of lubricant-infused materials and other novel antifouling platforms for various bioengineering and engineering applications.

Harnessing coal and coal waste for environmental conservation: A review of photocatalytic materials.

Fossil fuels, especially coal, have played a pivotal role in driving technological and economic advancements over the past century, though accompanied by numerous environmental challenges. Rapid progress in green and sustainable energy sources, including tidal, wind, and solar energy, coupled with growing environmental concerns, the conventional coal industry is experiencing a sustained decline in both size and financial viability. This situation necessitates the urgent adoption of advanced approaches to coal utilization. Beyond serving as an energy source, coal and its by-products, known as coal waste, can serve as valuable resources for the development of advanced materials, including photocatalysts. The advancement of photocatalytic materials derived from coal and coal waste can capitalize on these natural carbon and mineral sources, providing a viable solution to numerous environmental challenges. Currently, research in this domain remains in its early stages, with existing studies primarily focusing on specific types of photocatalysts or particular aspects of the fabrication process. Therefore, available coal-based and coal waste-based photocatalytic materials were systematically examined and categorized into six types according to their composition and dimensional/structural characteristics. Each type of photocatalytic material was introduced, along with common fabrication and characterization technologies. Representative works were discussed in detail to highlight the unique features of different types of coal-based and coal waste-based photocatalytic materials. Furthermore, the promising applications of these materials in environmental protection and pollution treatment were summarized, while also addressing the challenges and prospects in this research field. This review comprehensively overviews the fundamental knowledge and recent advancements in photocatalytic materials derived from coal and coal waste, with the goal of catalyzing the development of next generation photocatalysts and contributing to the transformation of the conventional coal industry.

Probing the interfacial behaviors of interfacially active and non-active asphaltenes and their impact on emulsion stability.

HYPOTHESIS: Asphaltenes subfractions with distinct interfacial behaviors may play different roles in stabilizing oil-water emulsions. EXPERIMENTS: In this work, whole asphaltenes were separated into interfacially active asphaltenes (IAA) and interfacially non-active asphaltenes (INAA). Employing advanced nanomechanical techniques, we have explored the compositions, morphologies, sizes, adsorption, and interfacial behaviors of IAA and INAA. FINDINGS: IAA exhibits a high and unevenly distributed oxygen content, distinguishing it from INAA. In toluene, the diameters of IAA and INAA are about 60 nm and 6 nm, respectively. When adsorbed irreversibly on mica surfaces, the thickness of the IAA and INAA film was measured at âˆ¼5.5 nm or 1 nm, respectively; while in a toluene solution, the film thickness reached âˆ¼46 nm and 3.1 nm for IAA and INAA, respectively. IAA demonstrates superior interfacial activity, and elastic/viscous moduli compared to INAA at the water-toluene interface. Quantified surface force measurements reveal that IAA stabilizes water droplets in toluene at a concentration of only 10 mg/L, while INAA requires a higher concentration of 100 mg/L. This work provides the first comprehensive investigation into the adsorption and interfacial behaviors of asphaltene subfractions and provides useful insights into the asphaltenes-stabilization mechanism of emulsions.

Ion association behaviors in the initial stage of calcium carbonate formation: An ab initio study.

In this work, we performed static density functional theory calculations and ab initio metadynamics simulations to systematically investigate the association mechanisms and dynamic structures of four kinds of ion pairs that could be formed before the nucleation of CaCO3. For Ca2+-HCO3- and Ca2+-CO32- pairs, the arrangement of ligands around Ca2+ evolves between the six-coordinated octahedral structure and the seven-coordinated pentagonal bipyramidal structure. The formation of ion pairs follows an associative ligand substitution mechanism. Compared with HCO3-, CO32- exhibits a stronger affinity to Ca2+, leading to the formation of a more stable precursor phase in the prenucleation stage, which promotes the subsequent CaCO3 nucleation. In alkaline environments, excessive OH- ions decrease the coordination preference of Ca2+. In this case, the formation of Ca(OH)+-CO32- and Ca(OH)2-CO32- pairs favors the dissociative ligand substitution mechanism. The inhibiting effects of OH- ion on the CaCO3 association can be interpreted from two aspects, i.e., (1) OH- neutralizes positive charges on Ca2+, decreases the electrostatic interactions between Ca2+ and CO32-, and thus hinders the formation of the CaCO3 monomer, and (2) OH- decreases the capacity of Ca2+ for accommodating O, making it easier to separate Ca2+ and CO32- ions. Our findings on the ion association behaviors in the initial stage of CaCO3 formation not only help scientists evaluate the impact of ocean acidification on biomineralization but also provide theoretical support for the discovery and development of more effective approaches to manage undesirable scaling issues.

Highly Stretchable, Transparent, Self-Healing Ion-Conducting Elastomers for Long-Term Reliable Human Motion Detection.

The flexible electronic sensor is a critical component of wearable devices, generally requiring high stretchability, excellent transmittance, conductivity, self-healing capability, and strong adhesion. However, designing ion-conducting elastomers meeting all these requirements simultaneously remains a challenge. In this study, a novel approach is presented to fabricate highly stretchable, transparent, and self-healing ion-conducting elastomers, which are synthesized via photo-polymerization of two polymerizable deep eutectic solvents (PDESs) monomers, i.e., methacrylic acid (MAA)/choline chloride (ChCl) and itaconic acid (IA)/ChCl. The as-prepared ion-conducting elastomers possess outstanding properties, including high transparency, conductivity, and the capability to adhere to various substrates. The elastomers also demonstrate ultra-stretchability (up to 3900%) owing to a combination of covalent cross-linking and noncovalent cross-linking. In addition, the elastomers can recover up to 3250% strain and over 94.5% of their original conductivity after self-healing at room temperature for 5 min, indicating remarkable mechanical and conductive self-healing abilities. When utilized as strain sensors to monitor real-time motion of human fingers, wrist, elbow, and knee joints, the elastomers exhibit stable and strong repetitive electrical signals, demonstrating excellent sensing performance for large-scale movements of the human body. It is anticipated that these ion-conducting elastomers will find promising applications in flexible and wearable electronics.

Recent advances in flexible hydrogel sensors: Enhancing data processing and machine learning for intelligent perception.

With the advent of flexible electronics and sensing technology, hydrogel-based flexible sensors have exhibited considerable potential across a diverse range of applications, including wearable electronics and soft robotics. Recently, advanced machine learning (ML) algorithms have been integrated into flexible hydrogel sensing technology to enhance their data processing capabilities and to achieve intelligent perception. However, there are no reviews specifically focusing on the data processing steps and analysis based on the raw sensing data obtained by flexible hydrogel sensors. Here we provide a comprehensive review of the latest advancements and breakthroughs in intelligent perception achieved through the fusion of ML algorithms with flexible hydrogel sensors, across various applications. Moreover, this review thoroughly examines the data processing techniques employed in flexible hydrogel sensors, offering valuable perspectives expected to drive future data-driven applications in this field.

Mussel-Inspired Polymer-Based Coating Technology for Antifouling and Antibacterial Properties.

Zwitterionic coatings provide a promising antifouling strategy against biofouling adhesion. Quaternary ammonium cationic polymers can effectively kill bacteria on the surface, owing to their positive charges. This strategy can avoid the release of toxic biocides, which is highly desirable for constructing coatings for biomedical devices. The present work aims to develop a facile method by covalently grafting zwitterionic and cationic copolymers containing aldehydes to the remaining amine groups of self-polymerized dopamine. Reversible addition-fragmentation chain transfer polymerization was used to copolymerize either zwitterionic 2-methacryloyloxyethyl phosphorylcholine monomer (MPC) or cationic 2-(methacryloyloxy)ethyl trimethylammonium monomer (META) with 4-formyl phenyl methacrylate monomer (FPMA), and the formed copolymers poly(MPC-st-FPMA) and poly(META-st-FPMA) are denoted as MPF and MTF, respectively. MPF and MTF copolymers were then covalently grafted onto the amino groups of polydopamine-coated surfaces. PDA/MPF/MTF-coated surfaces exhibited antibacterial and antifouling properties against S. aureus, E. coli, and bovine serum albumin protein. In addition, they showed excellent viability of normal human lung fibroblast cells MRC-5. We expect the facile surface modification strategy discussed here to be applicable to medical device manufacturing.

Multivitamins co-intake can reduce the prevalence of kidney stones: a large-scale cross-sectional study.

BACKGROUND: This research aimed to explore the association between changes in the intake of common individual vitamins and combinations of vitamins and the prevalence of kidney calculi. METHODS: We used data from NHANES to investigate the association between nine common vitamins and kidney stone prevalence. Participants were clustered into several vitamin exposure patterns using an unsupervised K-means clustering method. We used logistic regression models and restrictive cubic spline curves to explore the influence of vitamins. RESULTS: The regression model exposed that compared to lower intake, high intake of vitamin B6 [Q4: OR (95% CI) = 0.76 (0.62, 0.93)], vitamin C [Q4: OR (95% CI) = 0.73 (0.59, 0.90)] and vitamin D [Q4: OR (95% CI) = 0.77 (0.64, 0.94)] individually exerted protective effects against the prevalence of kidney stones. Furthermore, the restrictive cubic spline analysis showed that the protective effect against the prevalence of kidney stones is enhanced as the take of vitamin B6 and vitamin D increased. Moreover, with the increase in vitamin C intake, its protective effect may turn into a risk factor. Regarding mixed exposure, Cluster 4 exhibited a significant protective effect against kidney stones compared with Cluster 1 [Model 3: OR (95% CI) = 0.79 (0.64, 0.98)]. CONCLUSIONS: Our research revealed that high levels of vitamin B6 and vitamin D intake were linked to a lower prevalence of kidney stone. With the gradual increase intake of vitamin C, the prevalence of kidney calculi decreased first and then increased. In addition, the co-exposure of nine vitamins is a protective factor for kidney stone disease.

Molecular interaction mechanism for humic acids fouling resistance on charged, zwitterion-like and zwitterionic surfaces.

Humic acids (HA) are ubiquitous in surface waters, leading to significant fouling challenges. While zwitterion-like and zwitterionic surfaces have emerged as promising candidates for antifouling, a quantitative understanding of molecular interaction mechanism, particularly at the nanoscale, still remains elusive. In this work, the intermolecular forces between HA and charged, zwitterion-like or zwitterionic monolayers in aqueous environments were quantified using atomic force microscope. Compared to cationic MTAC ([2-(methacryloyloxy)ethyl]trimethylammonium chloride), which exhibited an adhesion energy of âˆ¼1.342 mJ/m2 with HA due to the synergistic effect of electrostatic attraction and possible cation-π interaction, anionic SPMA (3-sulfopropyl methacrylate) showed a weaker adhesion energy (∼0.258 mJ/m2) attributed to the electrostatic repulsion. Zwitterion-like MTAC/SPMA mixture, driven by electrostatic attraction between opposite charges, formed a hydration layer that prevented the interaction with HA, thereby considerably reducing adhesion energy to âˆ¼0.123 mJ/m2. In contrast, zwitterionic MPC (2-methacryloyloxyethyl phosphorylcholine) and DMAPS ([2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl) ammonium hydroxide) displayed ultralow adhesion energy (0.06-0.07 mJ/m2) with HA, arising from their strong dipole moments which could induce a tight hydration layer that effectively inhibited HA fouling. The pH-mediated electrostatic interaction resulted in the increased adhesion energy for MTAC but decreased adhesion energy for SPMA with elevated pH, while the adhesion energy for zwitterion-like and zwitterionic surfaces was independent of environmental pH. Density functional theory (DFT) simulation confirmed the strong binding capability of MPC and DMAPS with water molecules (∼-12 kcal mol-1). This work provides valuable insights into the molecular interaction mechanisms underlying humic-substance-fouling resistance of charged, zwitterion-like and zwitterionic materials at the nanoscale, shedding light on developing more effective strategy for HA antifouling in water treatment.

Sources, colloidal characteristics, and separation technologies for highly hazardous waste nanoemulsions.

Nanoemulsions play a crucial role in various industries. However, their application often results in hazardous waste, posing significant risks to human health and the environment. Effective management and separation of waste nanoemulsions requires special attention and effort. This review provides a comprehensive understanding of waste nanoemulsions, covering their sources, characteristics, and suitable treatment technologies, intending to mitigate their environmental impact. This study examines the evolution of nanoemulsions from beneficial products to hazardous wastes, provides an overview of the production processes, fate, and hazards of waste nanoemulsions, and highlights the critical characteristics that affect their stability. The latest advancements in separating waste nanoemulsions for recovering oil and reusable water resources are also presented, providing a comprehensive comparison and evaluation of the current treatment techniques. This review addresses the significant challenges in nanoemulsion treatment, provides insights into future research directions, and offers valuable implications for the development of more effective strategies to mitigate the hazards associated with waste nanoemulsions.

Unraveling Partial Coalescence Between Droplet and Oil-Water Interface in Water-in-Oil Emulsions under a Direct-Current Electric Field via Molecular Dynamics Simulation.

When the electric field strength (E) surpasses a certain threshold, secondary droplets are generated during the coalescence between water droplets in oil and the oil-water interface (so-called the droplet-interface partial coalescence phenomenon), resulting in a lower efficiency of droplet electrocoalescence. This study employs molecular dynamics (MD) simulations to investigate the droplet-interface partial coalescence phenomenon under direct current (DC) electric fields. The results demonstrate that intermolecular interactions, particularly the formation of hydrogen bonds, play a crucial role in dipole-dipole coalescence. Droplet-interface partial coalescence is categorized into five regimes based on droplet morphology. During the contact and fusion of the droplet with the water layer, the dipole moment of the droplet exhibits alternating increases and decreases along the electric field direction. Electric field forces acting on sodium ions and the internal interactions within droplets promote the process of droplet-interface partial coalescence. High field strengths cause significant elongation of the droplet, leading to its fragmentation into multiple segments. The migration of hydrated ions has a dual impact on the droplet-interface partial coalescence, with both facilitative and suppressive effects. The time required for droplet-interface partial coalescence initially decreases and subsequently increases as the field strength increases, depending on the competitive relationship between the extent of droplet stretching and the electric field force. This work provides molecular insights into the droplet-interface coalescence mechanisms in water-in-oil emulsions under DC electric fields.

Urchin-like CO2-responsive magnetic microspheres for highly efficient organic dye removal.

CO2-responsive materials have emerged as promising adsorbents for the remediation of refractory organic dyes-contaminated wastewater without the formation of byproducts or causing secondary pollution. However, realizing the simultaneous adsorption-separation or complete removal of both anionic and cationic dyes, as well as achieving deeper insights into their adsorption mechanism, still remains a challenge for most reported CO2-responsive materials. Herein, a novel type of urchin-like CO2-responsive Fe3O4 microspheres (U-Fe3O4 @P) has been successfully fabricated to enable ultrafast, selective, and reversible adsorption of anionic dyes by utilizing CO2 as a triggering gas. Meanwhile, the CO2-responsive U-Fe3O4 @P microspheres exhibit the capability to initiate Fenton degradation of non-adsorbable cationic dyes. Our findings reveal exceptionally rapid adsorption equilibrium, achieved within a mere 5 min, and an outstanding maximum adsorption capacity of 561.2 mg g-1 for anionic dye methyl orange upon CO2 stimulation. Moreover, 99.8% of cationic dye methylene blue can be effectively degraded through the Fenton reaction. Furthermore, the long-term unresolved interaction mechanism of organic dyes with CO2-responsive materials is deciphered through a comprehensive experimental and theoretical study by density functional theory. This work provides a novel paradigm and guidance for designing next-generation eco-friendly CO2-responsive materials for highly efficient purification of complex dye-contaminated wastewater in environmental engineering.

Association of the oxidation balance score with the prevalence of chronic obstructive pulmonary disease from the NHANES 2007-2012: A large-scale cross-sectional study.

BACKGROUND: The occurrence of chronic obstructive pulmonary disease (COPD) is associated with oxidative stress. Oxidation Balance Score (OBS) can evaluate the oxidation and antioxidant status of the body. However, we found no studies that examined the association between the two. OBJECTIVE: To assess the association between OBS and COPD prevalence, and to explore dietary and lifestyle patterns aimed at preventing and delay COPD in adults. METHOD: We included 13,909 participants using data from the NHANES. Weighted logistic regression model and weighted restricted cubic spline curve were used to explore the relationship between OBS and COPD. Subgroup analysis and sensitivity analysis were used to determine the stability of results. Mediation analysis was employed to assess the effect of inflammatory factors. RESULT: In logistic regression model, compared with the lowest quartile of OBS, the highest quartile of OBS, diet OBS, lifestyle OBS and COPD had odd ratios OR(95%CI)=0.67 (0.51, 0.89), OR (95% CI) = 0.71 (0.55, 0.93), and OR (95% CI) = 0.39 (0.26, 0.58) respectively. The restricted cubic spline curve reveals that OBS and dietary OBS exhibit an L-shaped curve in relation to COPD prevalence, while lifestyle OBS shows a negative correlation curve with COPD prevalence. Subgroup analysis and sensitivity analysis proved the robustness of the association. Mediation analysis demonstrated that inflammatory factors mediate the association of OBS on the prevalence of COPD. CONCLUSION: The increase of OBS, dietary OBS, and lifestyle OBS was associated with a decrease in the prevalence of COPD, but excessive OBS and dietary OBS were associated with an inapparent decrease or even increased risk of COPD.

Omentin-1 inhibits the development of benign prostatic hyperplasia by attenuating local inflammation.

BACKGROUND: Benign prostatic hyperplasia (BPH) is a prevalent disease affecting elderly men, with chronic inflammation being a critical factor in its development. Omentin-1, also known as intelectin-1 (ITLN-1), is an anti-inflammatory protein primarily found in the epithelial cells of the small intestine. This study aimed to investigate the potential of ITLN-1 in mitigating BPH by modulating local inflammation in the prostate gland. METHODS: Our investigation involved two in vivo experimental models. Firstly, ITLN-1 knockout mice (Itln-1-/-) were used to study the absence of ITLN-1 in BPH development. Secondly, a testosterone propionate (TP)-induced BPH mouse model was treated with an ITLN-1 overexpressing adenovirus. We assessed BPH severity using prostate weight index and histological analysis, including H&E staining, immunohistochemistry, and enzyme-linked immunosorbent assay. In vitro, the impact of ITLN-1 on BPH-1 cell proliferation and inflammatory response was evaluated using cell proliferation assays and enzyme-linked immunosorbent assay. RESULTS: In vivo, Itln-1-/- mice exhibited elevated prostate weight index, enlarged lumen area, and higher TNF-α levels compared to wild-type littermates. In contrast, ITLN-1 overexpression in TP-induced BPH mice resulted in reduced prostate weight index, lumen area, and TNF-α levels. In vitro studies indicated that ITLN-1 suppressed the proliferation of prostate epithelial cells and reduced TNF-α production in macrophages, suggesting a mechanism involving the inhibition of macrophage-mediated inflammation. CONCLUSION: The study demonstrates that ITLN-1 plays a significant role in inhibiting the development of BPH by reducing local inflammation in the prostate gland. These findings highlight the potential of ITLN-1 as a therapeutic target in the management of BPH.

Interfacial Hydrogen Bond-Reinforced Adhesion and Cohesion Enabling an Ultrastretchable and Wet Adhesive Hydrogel Strain Sensor.

Historically, research on silicotungstic-acid-based hydrogels has primarily focused on their adhesive properties, often at the expense of mechanical strength (cohesion). In this study, we present a novel approach to fabricate a polysaccharide hydrogel that harmoniously balances both adhesion and cohesion via interfacial hydrogen bonds. This hydrogel, composed of carboxymethyl cellulose (CMC), polyacrylamide (PAM), silicotungstic acid (SiW), and lithium chloride (LiCl), showcases a unique combination of properties: strain-responsive ionic conductivity, superior transparency, remarkable stretchability, and robust adhesion. Contrary to conventional PAM hydrogels, our PAM-SiW networked hydrogel addresses the common challenge of achieving good adhesion without compromising on cohesion. Specifically, our hydrogel demonstrates a maximum toughness of 20.3 MJ/m3 and a strain of 4079%, an accomplishment rarely observed in other adhesive hydrogel. Furthermore, the hydrogel's adhesion is both reversible and versatile, adhering effectively to a variety of wet and dry substrates. This makes it a promising candidate for advanced healthcare applications, particularly as a mechanically reinforced underwater adhesive with unparalleled stability. We also provide insights into the role of LiCl in the hydrogel matrix, emphasizing its influence on electrostatic interactions without affecting the hydrogen bonds. This study serves as a testament to the potential of harmonizing adhesive and cohesive properties in hydrogels, paving the way for future innovations in the field.

Tannic Acid-Based Coatings Containing Zwitterionic Copolymers for Improved Antifouling and Antibacterial Properties.

The prevention of biofilm formation on medical devices has become highly challenging in recent years due to its resistance to bactericidal agents and antibiotics, ultimately resulting in chronic infections to medical devices. Therefore, developing inexpensive, biocompatible, and covalently bonded coatings to combat biofilm formation is in high demand. Herein, we report a coating fabricated from tannic acid (TA) as an adhesive and a reducing agent to graft the zwitterionic polymer covalently in a one-step method. Subsequently, silver nanoparticles (AgNPs) are generated in situ to develop a coating with antifouling and antibacterial properties. To enhance the antifouling property and biocompatibility of the coating, the bioinspired zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) was copolymerized with 2-aminoethyl methacrylamide hydrochloride (AEMA) using conventional free-radical polymerization. AEMA moieties containing amino groups were used to facilitate the conjugation of the copolymer with quinone groups on TA through the Michael addition reaction. Three copolymers with different ratios of monomers were synthesized to understand their impacts on fouling resistance: PMPC100, p(MPC80-st-AEMA20), and p(MPC90-st-AEMA10). To impart antibacterial properties to the surface, AgNPs were formed in situ, utilizing the unreacted quinone groups on TA, which can reduce the silver ions. The successful coating of TA and copolymer onto the surfaces was confirmed by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and its excellent wettability was verified by the water contact angle (CA). Furthermore, the functionalized coatings showed antibacterial properties against E. coli and S. aureus and remarkably decreased the adhesion of the BSA protein. The surfaces can also prevent the adhesion of bacteria cells, as confirmed by the inhibition zone test. In addition, they showed negligible cytotoxicity to normal human lung fibroblast cells (MRC-5). The as-prepared coatings are potentially valuable for biomedical applications.

Study on preparation of UV-CDs/Zeolite-4A/TiO2 composite photocatalyst coupled with ultraviolet-irradiation and their application of photocatalytic degradation of dyes.

In this work, ultraviolet irradiation was employed to assist in the preparation of a novel photocatalyst composite in the form of carbon dots/zeolite-4A/TiO2, using coal tailings as the source of silicon-aluminum and carbon. The composite was designed for the degradation of methylene blue under 500 W of UV light irradiation. Zeolite-4A was used as a support for the well-dispersed carbon dots and TiO2 nanoparticles. The as-prepared composites were subjected to thorough characterization, confirming the successful formation of zeolite-4A with a cube structure, along with the loading of TiO2 and coal-based CDs in the composites. The experimental results demonstrated that the UV-CZTs nanocomposites exhibited a remarkable removal efficiency of 90.63% within 90 min for MB. The corresponding rate constant was exceptionally high at 0.0331 min-1, surpassing that of the Dark-CZTs and pure TiO2. This significant enhancement was possibly due to the synergistic effect of adsorption photocatalysis of the UV-CZTs, combined with the excellent electron-accepting capabilities of the coal-based CDs, which led to highly improved charge separation. An investigation of the spent photocatalyst's recyclability revealed that it retained a remarkable 82.94% MB removal efficiency after five consecutive cycles, signifying the stability of the composite. Trapping experiments also elucidated the primary reactive species responsible for MB degradation, which were identified as photo-generated holes and ⸱O2- species. By this process, the hydroxyl radicals generated in the system successfully promoted the transformation of coal tailings to coal-based zeolite and coal-based CDs. Coal-based zeolite served as an excellent carrier of titanium dioxide, which improved its dispersibility. The inhibition of e--h+ recombination of titanium dioxide by introducing coal-based CDs improved the photocatalytic ability of titanium dioxide. Through this study, coal tailings, as a coal processing waste, were transformed into high-value materials, and relevant photocatalytic composite materials could be prepared with broad application prospects.

Dual-Protection Inorganic-Protein Coating on Mg-Based Biomaterials through Tooth-Enamel-Inspired Biomineralization.

Biocompatible magnesium alloys represent revolutionary implantable materials in dentistry and orthopedics but face challenges due to rapid biocorrosion, necessitating protective coatings to mitigate dysfunction. Directly integrating durable protective coatings onto Mg surfaces is challenging because of intrinsic low coating compactness. Herein, inspired by tooth enamel, a novel highly compact dual-protection inorganic-protein (inorganicPro) coating is in situ constructed on Mg surfaces through bovine serum albumin (BSA) protein-boosted reaction between sodium fluoride (NaF) and Mg substrates. The association of Mg ions and BSA establishes a local hydrophobic domain that lowers the formation enthalpy of NaMgF3 nanoparticles. This process generates finer nanoparticles that function as "bricks," facilitating denser packing, consequently reducing voidage inside coatings by over 50% and reinforcing mechanical durability. Moreover, the incorporation of BSA in and on the coatings plays two synergistic roles: 1) acting as "mortar" to seal residual cracks within coatings, thereby promoting coating compactness and tripling anticorrosion performance, and 2) mitigating fouling-accelerated biocorrosion in complex biosystems via tenfold resistance against biofoulant attachments, including biofluids, proteins, and metabolites. This innovative strategy, leveraging proteins to alter inorganic reactions, benefits the future coating design for Mg-based and other metallic materials with tailored anticorrosion and antifouling performances.

Formation and Nanomechanical Properties of Silver-Mediated Guanine DNA Duplexes in Aqueous Solution.

Silver cations can mediate base pairing of guanine (G) DNA oligomers, yielding linear parallel G-Ag+-G duplexes with enhanced stabilities compared to those of canonical DNA duplexes. To enable their use in programmable DNA nanotechnologies, it is critical to understand solution-state formation and the nanomechanical stiffness of G-Ag+-G duplexes. Using temperature-controlled circular dichroism (CD) spectroscopy, we find that heating mixtures of G oligomers and silver salt above 50 °C fully destabilizes G-quadruplex structures and converts oligomers to G-Ag+-G duplexes. Electrospray ionization mass spectrometry supports that G-Ag+-G duplexes form at stoichiometries of 1 Ag+ per base pair, and CD spectroscopy suggests that as the Ag+/base stoichiometry increases further, G-Ag+-G duplexes undergo additional morphological changes. Using liquid-phase atomic force microscopy, we find that this excess Ag+ enables assembly of long fiberlike structures with ∼2.5 nm heights equivalent to a single DNA duplex but with lengths that far exceed a single duplex. Finally, using the conditions established to form single G-Ag+-G duplexes, we use a surface forces apparatus (SFA) to compare the solution-phase stiffness of single G-Ag+-G duplexes with dG-dC Watson-Crick-Franklin duplexes. SFA shows that G-Ag+-G duplexes are 1.3 times stiffer than dG-dC duplexes, confirming gas-phase ion mobility spectrometry measurements and computational predictions. These findings may guide the development of structural DNA nanotechnologies that rely on silver-mediated base pairing.