RESUMO
Previous studies on supercavitation flow have primarily focused on a standing water environment, neglecting the impact of periodic disturbance in a marine environment. Therefore, a series of periodic functions with different frequencies and amplitudes are defined to simulate the periodic disturbance, and a slender projectile is adopted to numerically study the effect of the periodic disturbance on the supercavitation phenomenon in this paper. Research results show that the cavity profile evolves periodically with the periodic disturbance of the external flow field. At the same time, as the frequency and amplitude increase, the minimum cavity shape gradually decreases to the point that the projectile cannot be wholly enveloped, and the maximum cavity profile gradually increases. Furthermore, the relationship between the cavity length (l i ) and the frequency (f) when the cavity cannot envelop the projectile is obtained (l i = -7.381f + 215.384). Meanwhile, the critical frequency range (7.16 ≤ f < 7.96) and amplitude range (1.1 ≤ am < 1.22) of the cavity to envelop the projectile are obtained. The key factors of periodic disturbances on supercavitation flow are revealed in this paper, which provides a theoretical foundation for maintaining supercavitation flow stability in an environment of periodic disturbance flow.
RESUMO
The selective catalytic oxidation (SCO) is an effective method for removing slipped high-concentration ammonia from NH3-fueled engine exhaust gas. Herein a novel bifunctional catalyst was synthesized by mechanically mixing sulfated Ce/ZrO2 (Ce/ZrO2-S) with a small fraction of Pt/Al2O3 (Pt 0.1 wt.%) for SCO of NH3. As expected, the introduction of a small amount of Pt/Al2O3 significantly improved NH3 conversion ability of Ce/ZrO2-S catalysts toward low-temperature direction. When the mass ratio of Pt/Al2O3 to Ce/ZrO2-S was 7.5% (the corresponding mixed catalyst was denoted as P@CZS-7.5), T90 temperature was 312 °C. More importantly, P@CZS-7.5 catalyst exhibited a much better N2 selectivity (> 96%) in a wide temperature range (320 ~ 450 °C). H2-TPR results revealed that the addition of a trace amount of Pt/Al2O3 significantly led to a distinct shift of reduction temperature peak toward low-temperature direction, thereby greatly improved the low-temperature redox performance of mixed catalysts. Furthermore, NH3-TPD and BET results showed that P@CZS-7.5 catalyst exhibited a similar NH3 adsorption capacity to Ce/ZrO2-S catalyst, while the former had a relatively higher specific surface area than the latter. It was considered as a crucial factor for P@CZS-7.5 catalyst maintaining superior N2 selectivity in high-concentration NH3 (5000 ppm) removal processes. In situ DRIFTS results indicated that P@CZS-7.5 catalyst followed the internal selective catalytic reduction (i-SCR) mechanism in NH3-SCO reactions.
Assuntos
Óxido de Alumínio , Amônia , Oxirredução , Amônia/química , Catálise , Óxido de Alumínio/química , Platina/química , Zircônio/químicaRESUMO
Osteofascial compartment syndrome is a serious surgical emergency that requires prompt diagnosis and treatment. It presents a challenge for surgeons due to its high disability rate and difficult management. Early fasciotomy decompression is crucial in preventing severe complications. Classic fasciotomy approaches for tibial osteofascial compartment syndrome include double-incision and single-incision techniques.This paper presents a case of a 24-year-old female with bilateral tibial posterior compartment syndrome resulting from prolonged squatting after alcohol intoxication, which is a relatively rare mechanism. We employed an innovative posterior approach to manage the patient with tibial posterior compartment syndrome. Ultimately, we successfully preserved the patient's legs and achieved a good functional recovery.The paper reported a rare case with bilateral posterior tibial compartment syndrome resulting from squatting for 10 hours after alcohol intoxication. The patient achieved favorable outcomes in lower limb function following treatment with a new fasciotomy approach, the posterior approach.The new approach for treating posterior tibial compartment syndrome can serve as a valuable reference for surgeons.
RESUMO
In view of the problem of poor coupling adaptability and easy rib spalling of coal wall in large mining height comprehensive mining, based on the effective inhibition effect of face guard mechanism on coal wall spalling, the structural characteristics and bearing capacity of different structural forms of the face guard mechanism are compared and analyzed. According to the surrounding rock adaptability of the face guard mechanism, established a numerical analysis model for rigid-flexible coupling of the face guard mechanism under different spalling forms. In order to accurately simulate the stress state of the protective mechanism, a variable stiffness spring damping system is used to replace the hydraulic cylinder. The load-bearing performance and response characteristics of the face guard mechanism under rib spalling coupling conditions were analyzed by applying uniform normal load and impact load to the face guard. The findings indicated that, the integral-type face guard mechanism has a better effect on suppressing rib spalling. When the face guard mechanism bears the static load of the coal wall, the entire response process of the face guard jack can be divided into three stages: initial support, increasing resistance bearing, constant resistance bearing; both the impact load position and the coupling state of the rib spalling will affect the characteristics of force transmission at the face guard mechanism's hinge point, the hinge point between the extensible canopy and the primary face guard is most sensitive to biased load. The research results can provide reference for optimizing the face guard mechanism of large mining height hydraulic support and improving the reliability of coal wall support.
RESUMO
Scraper conveyor is the most important transportation equipment in the comprehensive mining equipment, and the chain drive system is its core subsystem, its dynamic characteristics will significantly affect the efficiency of coal transportation in the comprehensive mining face. In this paper, the dynamic characteristics of chain drive system when impacted by falling coal are investigated by means of test. The impact test bench of scraper conveyor was set up to analyze the effects of chain speed, impact height and impact load mass on the dynamic characteristics of the chain drive system of scraper conveyor under the working conditions of unloaded and loaded. The results show that the longitudinal vibration of the scraper conveyor is most obvious when it is impacted by the falling coal, and the chain speed, impact height and impact load mass of the scraper conveyor all play an excitation role on the vibration of the chain drive system, and the vibration of the chain ring is the most intense in the chain drive system, and the loaded coal pile conveyed on the scraper conveyor plays an inhibiting role on the vibration of the chain drive system. This study can help to identify the location where the scraper conveyor fails first in the impact condition, so as to provide a basis for its structural design and improvement, which is of great significance for the stable operation and structural optimization of the scraper conveyor.
Assuntos
Carvão Mineral , Mineração , Carvão Mineral/análise , Meios de Transporte , VibraçãoRESUMO
Due to the influence of structural clearances, the shearer's oscillates and jumps concerning the scraper are frequent, which induces the collision and vibration impact of the traction components and exacerbates the traction failure of the shearer. Therefore, to explore the correlation between attitude disturbance and traction vibration, an experiment on the traction vibration is carried out, the spatial swaying of the shearer and vibration differences between two traction components are obtained, the influence of the lifting angle of the rocker arm is discussed, and the influence mechanism of the shearer attitude disturbance on traction vibration is elucidated. The results indicate that the rolling swing intensity of the shearer is the highest while the yawing swing intensity is the lowest, and the pitch swing intensity increases with the increase of the lifting angle of the rocker arm. Besides, the vibration impact indices of the two walking mechanisms have a competitive relationship of one decreasing but the other increasing, which can be used as a reference signal to judge the rolling swing and load-sharing performance of the traction part. Moreover, with the swing attitude, the competitive relationship of the average of vibration peaks is shown in the two support shoes, and it can be used as a reference signal to judge the pitching swing and the load-sharing performance of the traction part. This result reveals the impact mechanism of attitude disturbances on traction vibration and proposes a signal monitoring approach for judging the traction attitude disturbance and load-sharing performance, providing a reference for reducing traction faults.
RESUMO
To address the lightweight and real-time issues of coal sorting detection, an intelligent detection method for coal and gangue, Our-v8, was proposed based on improved YOLOv8. Images of coal and gangue with different densities under two diverse lighting environments were collected. Then the Laplacian image enhancement algorithm was proposed to improve the training data quality, sharpening contours and boosting feature extraction; the CBAM attention mechanism was introduced to prioritize crucial features, enhancing more accurate feature extraction ability; and the EIOU loss function was added to refine box regression, further improving detection accuracy. The experimental results showed that Our-v8 for detecting coal and gangue in a halogen lamp lighting environment achieved excellent performance with a mean average precision (mAP) of 99.5%, was lightweight with FLOPs of 29.7, Param of 12.8, and a size of only 22.1 MB. Additionally, Our-v8 can provide accurate location information for coal and gangue, making it ideal for real-time coal sorting applications.
RESUMO
Collectin is a crucial component of the innate immune system and plays a vital role in the initial line of defense against pathogen infection. In mammals, collectin kidney 1 (CL-K1) is a soluble collectin that has recently been identified to have significant functions in host defense. However, the evolutionary origins of immune defense of CL-K1 and its mechanism in clearance of pathogenic microorganisms remain unclear, especially in early vertebrates. In this study, the Oreochromis niloticus CL-K1 (OnCL-K1) protein was purified and identified, which was capable of binding to two important pathogens of tilapia, Streptococcus agalactiae and Aeromonas hydrophila. Interestingly, OnCL-K1 exhibited direct bactericidal activity by binding to lipoteichoic acid or LPS on cell walls, disrupting the permeability and integrity of the bacterial membrane in vitro. Upon bacterial challenge, OnCL-K1 significantly inhibited the proliferation of pathogenic bacteria, reduced the inflammatory response, and improved the survival of tilapia. Further research revealed that OnCL-K1 could associate with OnMASPs to initiate and regulate the lectin complement pathway. Additionally, OnCD93 reduced the complement-mediated hemolysis by competing with OnMASPs for binding to OnCL-K1. More importantly, OnCL-K1 could facilitate phagocytosis by collaborating with cell surface CD93 in a lectin pathway-independent manner. Moreover, OnCL-K1 also promoted the formation of phagolysosomes, which degraded and killed ingested bacteria. Therefore, this study reveals the antibacterial response mechanism of CL-K1 in primitive vertebrates, including promoting complement activation, enhancing opsonophagocytosis, and killing of macrophages, as well as its internal links, all of which provide (to our knowledge) new insights into the understanding of the evolutionary origins and regulatory roles of the collectins in innate immunity.
Assuntos
Macrófagos , Opsonização , Animais , Macrófagos/metabolismo , Ativação do Complemento , Rim/metabolismo , Vertebrados , Colectinas/metabolismo , Proteínas de Peixes/metabolismo , Mamíferos/metabolismoRESUMO
Aiming at the problem of easy misdetection and omission of small targets of long-distance vehicles in detecting vehicles in traffic scenes, an improved YOLOX_S detection model is proposed. Firstly, the redundant part of the original YOLOX_S network structure is clipped using the model compression strategy, which improves the model inference speed while maintaining the detection accuracy; secondly, the Resunit_CA structure is constructed by incorporating the coordinate attention module in the residual structure, which reduces the loss of feature information and improves the attention to the small target features; thirdly, in order to obtain richer small target features, the PAFPN structure tail to add an adaptive feature fusion module, which improves the model detection accuracy; finally, the loss function is optimized in the decoupled head structure, and the Focal Loss loss function is used to alleviate the problem of uneven distribution of positive and negative samples. The experimental results show that compared with the original YOLOX_S model, the improved model proposed in this paper achieves an average detection accuracy of 77.19% on this experimental dataset. However, the detection speed decreases to 29.73 fps, which is still a large room for improvement in detection in real-time. According to the visualization experimental results, it can be seen that the improved model effectively alleviates the problems of small-target missed detection and multi-target occlusion.
RESUMO
The combined rock breaking method with the saw blade and conical pick is proposed to improve the rock breaking efficiency. The numerical simulation of combined rock breaking with the saw blade and conical pick is established to investigate the rock damage mechanism. And verified and modified the numerical simulation model with the rock breaking comprehensive test bench, the quantitative analysis error is less than 0.05, indicated quantitative analysis system is accuracy. The result indicated that the cutting parameters of the saw blade and conical pick affect the rock damage. And the cutting parameters of conical pick and structural parameters of rock plate have been studied to influence rock breaking volume. The research result could help optimize the cutting parameters of the saw blade and conical pick to improve the rock breaking efficiency.
RESUMO
Pentraxin 3 (PTX3) is a soluble pattern recognition molecule in the innate immune system that has multiple functions. It is involved in resisting pathogen infection. However, the functions of PTX3 in teleost fish are not well understood. In this study, we identified and characterized PTX3 in Nile tilapia (Oreochromis niloticus) (OnPTX3). The open reading frame of OnPTX3 was found to be 1305 bp, encoding 434 aa. We conducted spatial mRNA expression analysis and found that the expression of OnPTX3 was significantly increased after infection with Streptococcus agalactiae and Aeromonas hydrophila, both in vivo and in vitro. We also observed that recombinant OnPTX3 protein could bind and agglutinate bacterial pathogen. Furthermore, OnPTX3 enhanced the phagocytosis of bacteria (S. agalactiae and A. hydrophila) by head kidney macrophages. Additionally, OnPTX3 was found to influence the expression of inflammatory cytokines, suggesting its involvement in the regulation of the inflammatory response. Moreover, OnPTX3 was shown to promote complement-mediated hemolysis and possess antibacterial activity. In conclusion, our research demonstrates that OnPTX3 has bacterial binding and agglutination activities, enhances phagocytosis, and regulates inflammation. It plays a crucial role in the defense of Nile tilapia against pathogenic bacteria, providing valuable insights for the prevention and control of aquatic diseases in the future.
RESUMO
Top coal caving in fully mechanized caving mining will cause an irregular impact on the caving mechanism of hydraulic support. The vibration response of the caving mechanism varies under different forms of impact. This response difference is a prerequisite for new coal rock identification technology in intelligent mining. Therefore, this work studies the difference in vibration response of the caving mechanism under different forms of impact. An innovative mechanical-hydraulic coupling system model of the caving mechanism impact by coal rock is established. The metal plate impact test proved the significant difference in vibration response of the caving mechanism under coal rock impact of different materials. Afterward, a more improved mechanical-hydraulic co-simulation model analyzed the difference in the vibration response of the caving mechanism under different rock materials, volumes, velocities and impact positions. The results show that the vibration response is more intense under rock impact than under coal impact. A lower position, a faster velocity and a larger volume correspond to a more noticeable response difference in the caving mechanism. The vibration and fault sensitive areas of the caving mechanism are determined. This study has a reference significance for improving the caving mechanism's structural design and failure prevention. The conclusions provide guidance for a new intelligent coal rock identification technology based on vibration signals.
RESUMO
The flow control range of the double-compound axial piston pump with the traditional mechanical-hydraulic feedback servo control is limited and the accuracy is poor. Accordingly, this paper proposes a digital control scheme and its control strategy using a linear stepper motor direct drive servo valve for the precise control and double pumps cooperation of the double-compound axial piston pump. A numerical model of the digital control double-compound axial piston pump is established, and the validity of the model is verified by experimental tests. The performance advantages of the digital control method relative to the mechanical-hydraulic feedback servo control method are analyzed, as is the performance of the control strategy for double pumps. The results show that the digital control method can achieve a wider range of flow control than the traditional mechanical-hydraulic feedback servo control method and avoid the torque impact on the prime mover caused by the active control. The combination of the flow control and the power control including four control modes can meet the performance requirements of the double-compound axial piston pump. The highest priority is given to the energy-saving control, which can reduce the displacement of the main pump in the nonworking state to reduce the additional power loss. The study provides a basis for the accurate matching and optimization of power to load and flow to operating speed of the double-compound axial piston pump.
RESUMO
STUDY OBJECTIVE: The low central venous pressure (LCVP) technique is a key technique in hepatectomy, but its impact on acute kidney injury (AKI) is unclear. The purpose of this study was to explore risk factors (in particular LCVP time) for AKI following hepatectomy. DESIGN: A retrospective case-control study with propensity score matching. SETTING: Operating room. PATIENTS: A total of 1949 patients who underwent hepatectomy were studied. INTERVENTIONS: The patients were grouped with or without AKI within 7 days after surgery. Univariable and multivariable analyses were performed, including recognized intraoperative predictors. The final result is represented as a nomogram. MEASUREMENTS: Preoperative, intraoperative and postoperative data were collected. LCVP is monitored directly through a central venous catheter via the right internal jugular vein. MAIN RESULTS: AKI occurred in 148 patients (7.59%). Surgery time, minimum SBP, furosemide administration and norepinephrine were identified as independent risk factors. The area under the curve for the receiver operating characteristic curves was 0.726 (95% CI 0.668-0.783). CONCLUSION: Intraoperative parameters can be used to predict the probability of postoperative AKI. Although AKI increases the length of stay, it may not increase in-hospital mortality. LCVP time was not confirmed to be a risk factor for AKI.
Assuntos
Injúria Renal Aguda , Hepatectomia , Humanos , Pontuação de Propensão , Hepatectomia/efeitos adversos , Estudos de Casos e Controles , Nomogramas , Estudos Retrospectivos , Injúria Renal Aguda/diagnóstico , Injúria Renal Aguda/epidemiologia , Injúria Renal Aguda/etiologiaRESUMO
The over-exploitation of resources caused by the increasing coal demand has resulted in a sharp increase in solid waste emissions mainly gangue, which has made the burden on the environment, economy, resources, and society of our country heavier. In order to achieve a balance between energy consumption and solid waste emission in the process of top coal caving, this study carried out coal gangue recognition research based on multi-source time-frequency domain feature fusion (MS-TFDF-F). First, the process of coal gangue symbiosis and the harm of gangue in top coal caving are analyzed, and the fundamental method of comprehensive treatment of gangue is put forward, which is the accurate recognition of the coal gangue interface. Second, by building a top coal caving simulation test bed, the MS signals generated in the caving process of the coal gangue mixture with a gangue content of 0-100% are collected and the TFDFs are extracted. Third, the MS-TFDF-F-based coal gangue recognition model is established. Then, the recognition effect of the two TFDF-F sample sets was compared, and the results show that the time-frequency domain feature selection fusion method (TFDFS-FM) has higher accuracy. On this basis, this paper studies the variation law of the number of sensors on the coal gangue recognition accuracy of MS information fusion. Finally, the economic, social, environmental, and resource benefits of the model are qualitatively described. The final results show that the MS-TFDF-F-based coal gangue recognition model has the strongest recognition ability when fusing six sensor signals, and the recognition accuracy reaches 99% under the AdaBoost algorithm. The establishment of this model brings huge benefits to China's environment, economy, resources, and society, and it is helpful to realize the balance between loss reduction mining and solid waste emission reduction in the process of top coal caving.
RESUMO
Mannose-binding lectin (MBL) is a multifunctional pattern recognition molecule, which not only mediates the recognition of pathogenic microorganisms and their products, playing an important role in innate immune defense, but also participates in adaptive immune responses of mammalian. However, it's related immune mechanism remains limited, especially the regulation of cell proliferation in early vertebrates. In this study, OnMBL was found to bind to kidney macrophages (MФ) from Nile tilapia (Oreochromis niloticus). Interestingly, OnMBL was able to reduce the proliferation of activated-MФ by regulating the cell cycle, arresting a large number of cells in the G0/G1 phase, and increasing the probability of apoptosis. More importantly, we found that the inhibition of cell proliferation by OnMBL was closely related to the evolutionarily conserved canonical transforming growth factor-beta 1 (TGF-ß1) signaling pathway. Mechanistically, OnMBL could significantly increase the expression of TGF-ß1, activate and regulate the downstream Smad-dependent pathway to reduce the MФ proliferation, thereby maintaining cellular homeostasis in the body's internal environment. This study represents the first description regarding the regulatory mechanisms of the MBL on cell proliferation in teleost fish, which provides a novel perspective on the understanding of the multiple function and evolutionary origins of C-type lectins in the immune system.
Assuntos
Ciclídeos , Animais , Fator de Crescimento Transformador beta1 , Macrófagos , Proliferação de Células , Lectinas de Ligação a Manose , Transdução de Sinais , MamíferosRESUMO
This paper describes an image processing-based technique used to measure the volume of residual water in the drinking water bottle for the laboratory mouse. This technique uses a camera to capture the bottle's image and then processes the image to calculate the volume of water in the bottle. Firstly, the Grabcut method separates the foreground and background to avoid the influence of background on image feature extraction. Then Canny operator was used to detect the edge of the water bottle and the edge of the liquid surface. The cumulative probability Hough detection identified the water bottle edge line segment and the liquid surface line segment from the edge image. Finally, the spatial coordinate system is constructed, and the length of each line segment on the water bottle is calculated by using plane analytical geometry. Then the volume of water is calculated. By comparing image processing time, the pixel number of liquid level, and other indexes, the optimal illuminance and water bottle color were obtained. The experimental results show that the average deviation rate of this method is less than 5%, which significantly improves the accuracy and efficiency of measurement compared with traditional manual measurement.
RESUMO
In top coal caving mining, the coal rock collapse will cause an irregular impact on the tail beam jack of the caving control mechanism. The severe impact will lead to jack failure. The bidirectional fluid-structure coupling model is built on Fluent and Mechanical software to study the impact response of the tail beam jack. The dynamic flow velocity streamlines, hydraulic pressure distribution, stress field, and strain field of the jack under impact load are extracted. The response characteristics of the jack in the stationary state and motion state are analyzed. The conclusions are as follows: the stress and strain of the rodless cavity are much larger than those of the rod cavity, which is more likely to be damaged. The hydraulic pressure in the jack cavity is in vertical layered distribution. The flow velocity streamlines present spiral shapes. The response degree of the hydraulic pressure signal in the rodless cavity is stronger than that in the rod cavity, and the response degree of the flow velocity signal in the rod cavity is stronger than that in the rodless cavity. The impact response of the jack in the motion state is more sensitive and stronger than that in the stationary state. The coal rock collapse situation can be most effectively identified only by comprehensively analyzing the rodless cavity's pressure signal and the rod cavity's velocity signal. This paper innovatively visualizes the flow velocity streamlines and pressure distribution together. The bidirectional fluid-structure coupling method is innovatively applied to the tail beam jack. The findings of this study can help for better understanding of the tail beam jack's structural design and failure prevention. This study provides a certain research basis for the intelligent coal rock identification technology in mining coal based on jack vibration signals.
RESUMO
Complement component 9 (C9), as an essential component of terminal membrane attack complex of complement system, plays an important role in innate immune defense. However, the function and regulatory mechanism of C9 in the antimicrobial immune response of teleost fish remain unclear. In this study, the open reading frame of Nile tilapia (Oreochromis niloticus) C9 (OnC9) gene was amplified. The mRNA and protein expression of OnC9 were significantly changed upon infection with Streptococcus agalactiae and Aeromonas hydrophila in vivo and in vitro. Upon bacterial challenge, the OnC9 knockdown could lead to rapid proliferation of the pathogenic bacteria, ultimately resulting in tilapia death. However, the phenotype was rescued by re-injection of OnC9, which restored the healthy status of the knockdown tilapia. Further, the OnC9 was an essential component in complement-mediated cell lysis and associated with OnCD59 to regulate the efficiency of lysis. Overall, this study indicates that OnC9 is involved in host defense against bacterial infection, and provides a valuable reference for further exploration of the molecular regulatory mechanism of C9 in innate immune defense in a primary animal.
Assuntos
Infecções Bacterianas , Ciclídeos , Doenças dos Peixes , Animais , Regulação da Expressão Gênica , Sequência de Aminoácidos , Ciclídeos/genética , Proteínas de Peixes/metabolismo , Streptococcus agalactiae/metabolismoRESUMO
Compared with the forward design method through the control of geometric parameters and material types, the inverse design method based on the target stress-strain curve is helpful for the discovery of new structures. This study proposes an optimization strategy for mechanical metamaterials based on a genetic algorithm and establishes a topology optimization method for energy-absorbing structures with the desired stress-strain curves. A series of structural mutation algorithms and design-domain-independent mesh generation method are developed to improve the efficiency of finite element analysis and optimization iteration. The algorithm realizes the design of ideal energy-absorbing structures, which are verified by additive manufacturing and experimental characterization. The error between the stress-strain curve of the designed structure and the target curve is less than 5%, and the densification strain reaches 0.6. Furthermore, special attention is paid to passive pedestrian protection and occupant protection, and a reasonable solution is given through the design of a multiplatform energy-absorbing structure. The proposed topology optimization framework provides a new solution path for the elastic-plastic large deformation problem that is unable to be resolved by using classical gradient algorithms or genetic algorithms, and simplifies the design process of energy-absorbing mechanical metamaterials.