Comprehensive assessment of the microbial community structure in a typical lead-zinc mine soil.

Understanding the microbial community structure in soil contaminated with heavy metals (HMs) is a precondition to conduct bioremediation in mine soil. Samples were collected from a typical lead-zinc (Pb-Zn) mine to assess the microbial community structure of the HMs concentrated in the soil. The goal was to analyze the bacterial and fungal community structures and their interactions using the 16S rRNA genes and internal transcribed spacer high-throughput sequencing. Analyses at different sampling sites showed that contamination with HMs significantly reduced the bacterial richness and diversity but increased that of the fungi. The predominant bacteria genera of Acidobacteriales, Gaiellales, Anaerolineaceae, Sulfurifustis, and Gemmatimonadaceae, and predominant fungal genera of Sordariomycetes, Talaromyces, and Mortierella were assumed as HM resistant genera in Pb-Zn mining area. The pH effect on the bacterial and fungal communities was opposite to those of Cd, Pb, and Zn. This study offers comprehensive outlooks for bacterial and fungal community structures upon multiple HM stresses in the soil around a typical Pb-Zn mine area.

The effect of quorum sensing on cadmium- and lead-containing wastewater treatment using activated sludge: Removal efficiency, enzyme activity, and microbial community.

Quorum sensing (QS) is prevalent in activated sludge processes; however, its essential role in the treatment of heavy metal wastewater has rarely been studied. Therefore, in this study, acyl homoserine lactone (AHL)-mediated QS was used to regulate the removal performance, enzyme activity, and microbial community of Cd- and Pb-containing wastewater in a sequencing batch reactor (SBR) over 30 cycles. The results showed that exogenous AHL strengthened the removal of Cd(II) and Pb(II) in their coexistence wastewater during the entire period. The removal of NH4+-N, total phosphorus, and chemical oxygen demand (COD) was also enhanced by the addition of AHL despite the coexistence of Cd(II) and Pb(II). Meanwhile, the protein content of extracellular polymeric substances was elevated and the microbial metabolism and antioxidative response were stimulated by the addition of AHL, which was beneficial for resistance to heavy metal stress and promoted pollutant removal by activated sludge. Microbial sequencing indicated that AHL optimized the microbial community structure, with the abundance of dominant taxa Proteobacteria and Unclassified_f_Enterobacteriaceae increasing by 73.9% and 59.2% maximally, respectively. This study offers valuable insights into the mechanisms underlying Cd(II) and Pb(II) removal as well as microbial community succession under AHL availability in industrial wastewater.

Effects of biochar layer position on treatment performance and microbial community in subsurface flow constructed wetlands for removal of cadmium and lead.

Levels of cadmium (Cd) and lead (Pb) correspond to common composition in acid mine wastewater of Hunan Province of China. The removal path of Cd and Pb and the structure of microbial community were investigated by developing constructed wetlands (CWs) with different layer positions of biochar. The biochar as a layer at the bottom of CW (BCW) system exhibited maximum Cd and Pb removal efficiencies of 96.6-98.6% and 97.2-98.9%, respectively. Compared with original soil, BCW increased the relative proportions of Proteobacteria, Firmicutes, Acidobacteriota, Verrucomicrobiota, Desulfobacterota, Armatimonadota, Bacteroidota, Patescibacteria, Basidiomycota (phylum level) and Burkholderia-Caballeronia-Paraburkholderia, Citrifermentans, Chthonomonadales, Cellulomonas, Geothrix, Terracidiphilus, Gallionellaceae, Microbacterium, Vanrija, Apiotrichum, Saitozyma, Fusarium (genus level). The concentrations of Cd and Pb were positively correlated with the abundance of Verrucomicrobiota, Basidiomycota (phylum level), and Methylacidiphilaceae, Meyerozyma, Vanrija (genus level). This study demonstrates that BCW system can improve removal performance toward Cd and Pb, as well as alter microbial community.

Enhanced indigenous consortia for the remediation of uranium-contaminated groundwater by bioaugmentation: Reducing and phosphate-solubilizing consortia.

To investigate the strengthening effects and mechanisms of bioaugmentation on the microbial remediation of uranium-contaminated groundwater via bioreduction coupled to biomineralization, two exogenous microbial consortia with reducing and phosphate-solubilizing functions were screened and added to uranium-contaminated groundwater as the experimental groups (group B, reducing consortium added; group C, phosphate-solubilizing consortium added). ß-glycerophosphate (GP) was selected to stimulate the microbial community as the sole electron donor and phosphorus source. The results showed that bioaugmentation accelerated the consumption of GP and the proliferation of key functional microbes in groups B and C. In group B, Dysgonomonas, Clostridium_sensu_stricto_11 and Clostridium_sensu_stricto_13 were the main reducing bacteria, and Paenibacillus was the main phosphate-solubilizing bacteria. In group C, the microorganisms that solubilized phosphate were mainly unclassified_f_Enterobacteriaceae. Additionally, bioaugmentation promoted the formation of unattached precipitates and alleviated the inhibitory effect of cell surface precipitation on microbial metabolism. As a result, the formation rate of U-phosphate precipitates and the removal rates of aqueous U(VI) in both groups B and C were elevated significantly after bioaugmentation. The U(VI) removal rate was poor in the control group (group A, with only an indigenous consortium). Propionispora, Sporomusa and Clostridium_sensu_stricto_11 may have played an important role in the removal of uranium in group A. Furthermore, the addition of a reducing consortium promoted the reduction of U(VI) to U(IV), and immobilized uranium existed in the form of U(IV)-phosphate and U(VI)-phosphate precipitates in group B. In contrast, U was present mainly as U(VI)-phosphate precipitates in groups A and C. Overall, bioaugmentation with an exogenous consortium resulted in the rapid removal of uranium from groundwater and the formation of U-phosphate minerals and served as an effective strategy for improving the treatment of uranium-contaminated groundwater in situ.

Boron-Catalyzed Graphitization Carbon Layer Enabling LiMn0.8 Fe0.2 PO4 Cathode Superior Kinetics and Li-Storage Properties.

The poor electrode kinetics and low conductivity of the LiMn0.8 Fe0.2 PO4 cathode seriously impede its practical application. Here, an effective strategy of boron-catalyzed graphitization carbon coating layer is proposed to stabilize the nanostructure and improve the kinetic properties and Li-storage capability of LiMn0.8 Fe0.2 PO4 nanocrystals for rechargeable lithium-ion batteries. The graphite-like BC3 is derived from B-catalyzed graphitization coating layers, which can not only effectively maintain the dynamic stability of the LiMn0.8 Fe0.2 PO4 nanostructure during cycling, but also plays an important role in enhancing the conductivity and Li+ migration kinetics of LiMn0.8 Fe0.2 PO4 @B-C. The optimized LiMn0.8 Fe0.2 PO4 @B-C exhibits the fastest intercalation/deintercalation kinetics, highest electrical conductivity (8.41 × 10-2 S cm-1 ), Li+ diffusion coefficient (6.17 × 10-12 cm2 s-1 ), and Li-storage performance among three comparison samples (B-C0, B-C6, and B-C9). The highly reversible properties and structural stability of LiMn0.8 Fe0.2 PO4 @B-C are further proved by operando XRD analysis. The B-catalyzed graphitization carbon coating strategy is expected to be an effective pathway to overcome the inherent drawbacks of the high-energy density LiMn0.8 Fe0.2 PO4 cathode and to improve other cathode materials with low-conductivity and poor electrode kinetics for rechargeable second batteries.

Microbial community and extracellular polymeric substances analysis of anaerobic granular sludge exposed to selenate, cadmium and zinc.

The microbial community and extracellular polymeric substances composition of anaerobic granular sludge exposed to selenate (~10 mg/L), cadmium (Cd) and zinc (Zn) (~2 and 5 mg/L) were investigated by high-throughput sequencing and fluorescence excitation emission matrix (FEEM) spectra, respectively. As a response to selenate, Cd and/or Zn exposure, significant fluorescence quenching of fulvic-like acids and humic-like substances was observed. With selenate, Cd and/or Zn in the influent with respective concentrations of 10, 5 and 5 mg/L, the abundance of the phyla Proteobacteria, Firmicutes, Spirochaetae, Cloacimonetes and Synergistetes increased significantly, and the dominant taxa in the anaerobic granular sludge exposed to Se, Cd and/or Zn were Halothiobacillaceae (10.2%), Pseudomonas (8.8%), Synergistaceae (7.7%), Spirochaetaceae (7.2%), Blvii28 wastewater sludge group (6.7%), Telmatospirillum (4.6%), Veillonellaceae (4.3%), Geobacter (4.0%) and Enterobacteriaceae (3.0%). Compared with the inoculum, the abundance of the archaea Methanobacterium and Methanosaeta decreased to below detection limit in the UASB reactor after 116 days exposure to Se, Cd and Zn.

Preparation of phosphorus-modified biochar for the immobilization of heavy metals in typical lead-zinc contaminated mining soil: Performance, mechanism and microbial community.

The use of modified biochar for the remediation of heavy metal (HM) has received much attention. However, the immobilization mechanism of biochar to multiple HMs and the interaction of different forms of HMs with microorganisms are still unclear. K2HPO4-modified biochar (PBC) was produced and used in a 90-days immobilization experiment with soil collected from a typic lead-zinc (Pb-Zn) mining soil. Incubation experiments showed that PBC enhanced the transformation of Cd, Pb, Zn and Cu from exchangeable (Ex-) and/or carbonate-bound forms (Car-) to organic matter-bound (Or-) and/or residual forms (Re-). After scanning electron microscopy-energy dispersive X-ray spectrometer (SEM-EDS), X-ray diffractometry (XRD), fourier transform infrared (FTIR), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) analysis, the mechanisms of HM immobilization by PBC were proposed as precipitation (PO43-, HPO42-, OH- and CO32-), electrostatic attraction, complexation (-COOH, -OH and R-O-H) and the indirect roles of soil parameter variations (pH, moisture and microbial community). Microbial community analysis through high-throughput sequencing showed that PBC reduced bacterial and fungal abundance. However, addition of PBC increased the relative proportions of Proteobacteria by 15.04%-42.99%, Actinobacteria by 4.74%-22.04%, Firmicutes by 0.76%-23.35%, Bacteroidota by 0.16%-12.34%, Mortierellomycota by 4.00%-9.66% and Chytridiomycota by 0.10%-13.7%. Ex-Cd/Pb/Zn, Car-Cd/Zn and Re-Cd/Pb/As were significantly positively (0.001

The remediation of uranium-contaminated groundwater via bioreduction coupled to biomineralization with different pH and electron donors.

Stimulating indigenous microbes to reduce aqueous U(VI) to insoluble U(IV) by adding an electron donor has been applied as an applicable strategy to remediate uranium-contaminated groundwater in situ. However, biogenic U(IV) minerals are susceptible to oxidative remobilization after exposure to oxygen. To enhance the stability of the end product, glycerol phosphate (GP) was selected to treat artificial uranium-containing groundwater at different pH values (i.e., 7.0 and 5.0) with glycerol (GY) as the control group. The results revealed that removal ratios of uranium with GP were all higher than those with GY, and reduced crystalline U(IV)-phosphate and U(VI)-phosphate minerals (recalcitrant to oxidative remobilization) were generated in the GP groups. Although bioreduction efficiency was influenced at pH 5.0, the stability of the end product with GP was elevated significantly compared with that with GY. Mechanism analysis demonstrated that GP could activate bioreduction and biomineralization of the microbial community, and two stages were included in the GP groups. In the early stage, bioreduction and biomineralization were both involved in the immobilization process. Subsequently, part of the U(VI) precipitate was gradually reduced to U(IV) precipitate by microorganisms. This work implied that the formation of U-phosphate minerals via bioreduction coupled with biomineralization potentially offers a more effective strategy for remediating uranium-contaminated groundwater with long-term stability.

3D Printing Technology for Smart Clothing: A Topic Review.

Clothing is considered to be an important element of human social activities. With the increasing maturity of 3D printing technology, functional 3D printing technology can realize the perfect combination of clothing and electronic devices while helping smart clothing to achieve specific functions. Furthermore, the application of functional 3D printing technology in clothing not only provides people with the most comfortable and convenient wearing experience, but also completely subverts consumers' perception of traditional clothing. This paper introduced the progress of the application of 3D printing from the aspect of traditional clothing and smart clothing through two mature 3D printing technologies normally used in the field of clothing, and summarized the challenges and prospects of 3D printing technology in the field of smart clothing. Finally, according to the analysis of the gap between 3D-printed clothing and traditionally made clothing due to the material limitations, this paper predicted that the rise in intelligent materials will provide a new prospect for the development of 3D-printed clothing. This paper will provide some references for the application research of 3D printing in the field of smart clothing.

Development of pH-responsive konjac glucomannan/pullulan films incorporated with acai berry extract to monitor fish freshness.

In this work, konjac glucomannan (KGM)-based film reinforced with pullulan (PL) and acai berry extract (ABE) was developed by solvent casting method. The as-prepared films performed pH-sensitive properties, which can be potentially applied for fish freshness detection. Rheology, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) were used to characterize chemical structure and morphology of ABE-loaded KGM/PL (KP) films (KP-ABE). FT-IR spectrum indicated that hydrogen bond dominated the formation of KP-ABE films. Adding PL contributed to enhanced mechanical properties of KGM film with increased tensile strength (TS) from 21.25 to 50.27 MPa and elongation at break (EAB) from 10.64 to 19.19 %. Incorporating ABE upgraded flexibility, UV-shielding, thermostability, water barrier (decreased Water vapor permeability (WVP) from 2.07 to 1.67 g·mm/m2·day kPa), antioxidant, and antibacterial ability of KP films, but weakened TS. In addition, KP-ABE films can reflect fish freshness in real time through color variability. Therefore, KP-ABE films exhibited potential applications in intelligent food packaging materials.

Characterization of Microbial Communities in Wastewater Treatment Plants Containing Heavy Metals Located in Chemical Industrial Zones.

Water pollution caused by heavy metals (HMs) poses a serious risk to human health and the environment and can increase the risk of diabetes, cancer, and hypertension in particular. In this study, two full-scale wastewater treatment plants (WWTPs) in industrial zones in southern China were selected to analyze the microbial community structure, diversity, similarity, and differentiation in the anoxic/oxic (AO) and anoxic/oxic membrane bioreactor (AO-MBR) units under the stress of HMs. High-throughput sequencing showed that microbial diversity and abundance were higher in the AO process than in the AO-MBR process. In the two WWTPs, the common dominant phyla were Proteobacteria and Bacteroidetes, while the common dominant genera were Gemmatimonadaceae, Anaerolineaceae, Saprospiraceae, and Terrimonas. Manganese (Mn) and zinc (Zn) positively correlated with Saccharimonadales, Nakamurella, Micrococcales, and Microtrichales, whereas copper (Cu) and iron (Fe) positively correlated with Longilinea and Ferruginibacter. Additionally, the relative abundances of Chloroflexi, Patescibacteria, and Firmicutes differed significantly (p < 0.05) between the two processes. These results may provide comprehensive outlooks on the characterization of microbial communities in WWTPs, which could also help to reduce the potential environmental risks of the effluent from WWTPs located in industrial zones.

Temporal dynamics of antibiotic resistant bacteria and antibiotic resistance genes in activated sludge upon exposure to starvation.

The activated sludge represents a huge reservoir for antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs). Owing to the wastewater fluctuation, annual maintenance and storage requirement, the activated sludge in wastewater treatment plants (WWTPs) may suffer from substrate deficiency (i.e., starvation). Whereas the starvation has been confirmed to regulate the antibiotic resistance in numerous pure bacteria, its impacts on the antibiotic resistance in activated sludge remain unclear. Here, the dynamics of sulfonamide and tetracycline ARB and corresponding ARGs in three forms including intracellular ARGs (iARGs), adsorbed extracellular ARGs (aeARGs) and free extracellular ARGs (feARGs) in activated sludge upon exposure to starvation were investigated. The results showed that, among the different electron donors (i.e., carbon, nitrogen and phosphate), carbon starvation could effectively reduce the absolute abundance of ARB and aeARGs by up to 1.68 lgs and 2.62 lgs, respectively, and released a small amount of feARGs in wastewater with the maximum value of 1.1 × 105 copies/mL due to the high degree of sludge cell lysis and DNA adsorption/degradation. For the different acceptor conditions (that is, alternating anaerobic-aerobic, anaerobic, anoxic and aerobic), the anaerobic-aerobic starvation obviously mitigated the absolute abundance of ARB, aeARGs and iARGs by 0.71 lgs, 3.41 lgs and 1.35 lgs, respectively, via the substantial sludge cell lysis and DNA degradation. These findings demonstrated the response patterns and mechanisms of bacterial resistance in activated sludge to starvation stress, and thus provide clues to control the risk of antibiotic resistance in WWTPs by the starvation strategy.

Effect of CuO/ZnO/FTO electrode properties on the performance of a photo-microbial fuel cell sensor for the detection of heavy metals.

The development of sustainable, low-cost and responsive technology for heavy metals detection in wastewater is crucial. In this study, by combining CuO/ZnO photocathode with microbial anode, a novel photo-microbial fuel cell (PMFC) sensor was developed. The self-powered PMFC was performed under light and dark condition for heavy metals detection. Compared with MFC sensor, PMFC sensor showed a wider detection range (0.1-4 mg L-1 of Cd2+ and 10-80 mg L-1 of Cu2+). The improved performance in sensing limit and sensitivity was mainly attributed to the intimate P-N heterojunctions formed in CuO/ZnO, which accelerated the electron transport between the photocathode and the microbial anode. Besides, the toxicity of five heavy metals tested in PMFC was shown as Cd2+>Cr6+>Zn2+>Hg2+>Cu2+. This study has taken advantage of the characteristics of PMFC and facilitated its application in heavy metals detection, which provides a new approach for the development of biosensors.

The removal of selenite and cadmium by immobilized biospheres: Efficiency, mechanisms and bacterial community.

In this study, a complex bacterial consortium was enriched from a typical Pb-Zn mine area and immobilized by sodium alginate to form biospheres, which were used for treatment of selenite (Se(IV))- and cadmium (Cd(II))-containing wastewater without external carbon source. Batch experiments showed that the maximum Se(IV) removal efficiency was 92.36% under the optimal conditions of an initial pH of 5, dosage of 5 g/L, initial Se(IV) concentration of 7.9 mg/L and reaction time of 168 h. Subsequently, more than 99% of 11.2 mg/L Cd(II) was removed by the biospheres within 10 h. Physicochemical characterization showed that reduction and adsorption were the main mechanisms for Se(IV) and Cd(II) removal, respectively. During the removal process, selenium and CdSe nanoparticles were formed. Bacterial community analysis showed the dominant bacterial genera changed after treatment of Se(IV)- and Cd(II)-containing wastewater. Additionally, 16S rRNA gene function prediction results showed that amino acid transport, carbohydrate transport, ion transport and metabolism were the dominant gene functions. The present study provides a potential way for the biological treatment of Se(IV)- and Cd(II)-containing wastewater using immobilized biospheres without external carbon source in short-term.

Biological Removal of Se and Cd from Acidic Selenite- and Cadmium-containing Wastewater with Limited Carbon Availability.

This study presents a successful treatment of biological acidic Se(IV)- and Cd(II)-containing wastewater via the SBR with limited carbon source (100 mg/L COD). Scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDS), high solution transmission electron microscopy (HRTEM) and X-ray photoelectron spectrometer (XPS) results verified the formation of elemental Se and CdSe nanoparticles in the sludge. The abundance of genera in the microbial community gradually changed over the treatment phases depending on the Se(IV) and Cd(II) exposure with different influent COD concentrations. The taxa of Proteiniclasticum, Clostridium_sensu_stricto_12, Longilinea and Mycobacterium were dominant. Redundancy analysis (RDA) indicates that COD concentrations had the greatest impact on Zoogloea and Pseudomonas by promoting an increased abundance and decreased abundance, respectively. Overall, the results extended our understanding of the mechanisms and microbial community responding for the Se(IV) and Cd(II) removal under limited carbon availability in acidic wastewater.

Microbial characteristic and bacterial community assessment of sediment sludge upon uranium exposure.

The microbial characteristics and bacterial communities of sediment sludge upon different concentrations of exposure to uranium were investigated by high solution transmission electron microscopy (HRTEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS) and high-throughput sequencing. After exposure to initial uranium concentrations of 10-50 µM for 24 h in synthetic wastewater, the removal efficiencies of uranium reached 80.7%-96.5%. The spherical and short rod bacteria were dominant in the sludge exposed to uranium. HRTEM-EDS and XPS analyses indicated that reduction and adsorption were the main mechanisms for uranium removal. Short-term exposure to low concentrations of uranium resulted in a decrease in bacterial richness but an increase in diversity. A dramatic change in the composition and abundances of the bacterial community were present in the sediment sludge exposed to uranium. The highest removal efficiency was identified in the sediment sludge exposed to 30 µM uranium, and the dominant bacteria included Acinetobacter (44.9%), Klebsiella (20.0%), Proteiniclasticum (6.7%), Enterobacteriaceae (6.6%), Desulfovibrio (4.4%), Porphyromonadaceae (4.1%), Comamonas (2.4%) and Sedimentibacter (2.3%). By comparison to the inoculum sediment sludge, exposure to uranium caused a substantial difference in the majority of bacterial abundance.

Fabrication and Optimization of the Thermo-Sensitive Hydrogel Carboxymethyl Cellulose/Poly(N-isopropylacrylamide-co-acrylic acid) for U(VI) Removal from Aqueous Solution.

In this work, the thermo-sensitive materials N-isopropylacrylamide (NIPAM) and acrylic acid (AA) were crosslinked with carboxymethyl cellulose (CMC) (CMC/P (NIPAM-co-AA)) via a free radical polymerization method for the removal of U(VI) from aqueous solution. The L16 (45) orthogonal experiments were designed for the optimization of the synthesis condition. The chemical structures of the crosslinking hydrogel were confirmed by FTIR spectroscopy. The microstructural analyses were conducted though scanning electron microscopy (SEM) to show the pore structure of the hydrogel. The adsorption performance of the CMC/P (NIPAM-co-AA) hydrogel for the uptake of U(VI) from simulated wastewater was also investigated. The adsorption reached equilibrium within 1 h. Under the reaction of pH = 6 and a temperature of 298 K, an initial concentration of U(VI) of 5 mg·L-1, and 10 mg of the CMC/P(NIPAM-co-AA) hydrogel, the maximum adsorption capacity was 14.69 mg g-1. The kinetics fitted perfectly with the pseudo-second-order model, and the isotherms for the composite hydrogel adsorption of U(VI) was in accordance with the Langmuir model. The chemical modification confirmed that the acylamino group played an important role in uranium adsorption. The desorption and reusability study revealed that the resolution rate was still available at approximately 77.74% after five alternate heating cycles at 20 and 50 °C of adsorption-desorption.

Analysis of uranium removal capacity of anaerobic granular sludge bacterial communities under different initial pH conditions.

The bacterial community of an anaerobic granular sludge associated with uranium depletion was investigated following its exposure to uranium under different initial pH conditions (pH 4.5, 5.5, and 6.5). The highest uranium removal efficiency (98.1%) was obtained for the sample with an initial pH of 6.5, which also supported the highest bacterial community richness and diversity. Venn diagrams visualized the decrease in the number of genera present in both the inoculum and the uranium-exposed biomass as the initial pH decreased from 6.5 to 4.5. Compared with the inoculum, a significant increase in the abundances of the phyla Chloroflexi and Proteobacteria was observed following uranium exposure. At initial pH conditions of 6.5 to 4.5, the proportions of the taxa Anaerolineaceae, Chryseobacterium, Acinetobacter, Pseudomonas, and Sulfurovum increased significantly, likely contributing to the observed uranium removal. Uranium exposure induced a greater level of dynamic diversification of bacterial abundances than did the initial pH difference.

Effect of Environmental Temperature on the Content of Impurity Li3V2(PO4)3/C in LiVPO4F/C Cathode for Lithium-ion Batteries.

Previous studies have shown that the impurity Li3V2(PO4)3 in LiVPO4F will adversely affect its electrochemical performance. In this work, we show that the crystalline composition of LiVPO4F/C is mainly influenced by the environmental temperature. The content of Li3V2(PO4)3 formed in LiVPO4F/C is 0, 11.84 and 18.75% at environmental temperatures of 10, 20, and 30°C, respectively. For the sample LVPF-30C, the SEM pattern shows a kind of alveolate microstructure and the result of selected area electron diffraction shows two sets of patterns. The LiVPO4F/C cathode without impurity phase Li3V2(PO4)3 was prepared at 10°C. The selected area electron diffraction result proves that the lattice pattern of LiVPO4F is a regular parallelogram. Electrochemical tests show that only one flat plateau around 4.2 V appears in the charge/discharge curve, and the reversible capacity is 140.4 mAh·g-1 at 0.1 C, and 116.3 mAh·g-1 at 5 C. From these analyses, it is reasonable to speculate that synthesizing LiVPO4F/C at a low environmental temperature is a practical strategy to obtain pure crystalline phase and good electrochemical performance.

Assessment of Bacterial Community Composition of Anaerobic Granular Sludge in Response to Short-Term Uranium Exposure.

The effect of 10-50 µM uranium (U(VI)) on the bacterial community of anaerobic granular sludge was investigated by 24-h exposure tests, after which the bacterial community was analyzed by high-throughput sequencing. The specific U(VI) reducing activity of the anaerobic granular sludge ranged between 3.1 to 19.7 µM U(VI) g-1(VSS) h-1, independently of the initial U(VI) concentration. Alpha diversity revealed that microbial richness and diversity was the highest for anaerobic granular sludge upon 10 µM uranium exposure. Compared with the original biomass, the phylum of Euryarchaeota was significantly affected, whereas the Bacteroidetes, Firmicutes, and Synergistetes phyla were only slightly affected. However, the abundance of Chloroflexi and Proteobacteria phyla clearly increased after 24 h uranium exposure. Based on the genus level analysis, significant differences appeared in the bacterial abundance after uranium exposure. The proportions of Pseudomonas, Acinetobacter, Parabacteroides, Brevundimonas, Sulfurovum, and Trichococcus increased significantly, while the abundance of Paludibacter and Erysipelotrichaceae incertae sedis decreased dramatically. This study shows a dynamic diversification of the bacterial composition as a response to a short time (24 h) U(VI) exposure (10-50 µM).