Identification and Validation of a Novel Tertiary Lymphoid Structures-Related Prognostic Gene Signature in Hepatocellular Carcinoma.

Background: Hepatocellular carcinoma (HCC) is one of the most common malignant tumors originating from the digestive system. Tertiary lymphoid structures (TLS), non-lymphoid tissues outside of the lymphoid organs, are closely connected to chronic inflammation and tumorigenesis. However, the detailed relationship between TLS and HCC prognosis remained unclear. In this study, we aimed to construct a TLS-related gene signature for predicting the prognosis of HCC patients. Methods: The Cancer Genome Atlas (TCGA) clinical data from 369 HCC tissues and 50 normal liver tissues were utilized to examine the differential expression of TLS-related genes. Based on least absolute shrinkage and selection operator (LASSO) Cox regression analysis, the prognostic model was constructed using the TCGA cohort and validated in the GSE14520 cohort and International Cancer Genome Consortium (ICGC) cohort. The Kaplan-Meier (KM) and receiver operating characteristic (ROC) curves were employed to validate the predictive ability of the prognostic model. Furthermore, Cox regression analysis was applied to identify whether the TLS score could be employed as an independent prognosis factor. A nomogram was developed to predict the survival probability of HCC patients. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were performed for TLS-related genes. Genetic mutation analysis, the CIBERSORT algorithm, and single-sample gene set enrichment analysis (ssGSEA) were used to assess the tumor mutation landscape and immune infiltration. Finally, the role of the TLS score in HCC therapy was investigated. Results: Six genes were included in the construction of our prognostic model (CETP, DNASE1L3, PLAC8, SKAP1, C7, and VNN2), and we validated its accuracy. Survival analysis showed that patients in the high-TLS score group had a significantly better overall survival than those in the low-TLS score group. Univariate, multivariate Cox regression analysis and the establishment of a nomogram indicated that the TLS score could independently function as a potential prognostic marker. A significant association between TLS score and immunity was revealed by an analysis of gene alterations and immune cell infiltration. In addition, two subtypes of the TLS score could accurately predict the effectiveness of sorafenib, transcatheter arterial chemoembolization (TACE), and immunotherapy in HCC patients. Conclusion: In this research, we conducted and validated a prognostic model associated with TLS that may be helpful for predicting clinical outcomes and treatment responsiveness for HCC patients.

Preparation and Wettability Analysis of Metal Biofunctional Surfaces Based on the Microquadrangular Structure.

Improving the hydrophobic properties of aluminum alloys is crucial for industry. In previous reports, researchers prepared superhydrophobic surfaces by fabricating micro-nanostructures on the metal surface with a nanosecond laser. However, no researchers have formed microquadrangular groove structures on the metal surface. In this article, inspired by the bamboo leaf, a microquadrangular structure is designed and processed using nanosecond laser technology to form a superhydrophobic functional surface. The effects of laser processing parameters, such as laser power, scanning speed, scanning time, defocus and fill spacing on the size, surface morphology features, and wettability of the microquadrangular structure, are investigated by a single-factor experimental method. The experimental results show the optimal size of the processed microquadrangular structure obtained from the experiment with an error of 1.28% from the design size, where the fill spacing has the greatest effect on the size and the scanning time, defocus, and fill spacing have great influence on the surface morphology. The contact angle of water drops on the surface can reach 154.7°, and the power has the greatest influence on the wettability. Laser parameters have distinct effects on the properties of the materials. Therefore, by regulation of the laser parameters, the formation of the microstructure can be availably controlled and the result of hydrophobicity can be achieved.

Initial study and phylogenetic analysis of hard ticks (Acari: Ixodidae) in Nantong, China along the route of avian migration.

The growing concern about migratory birds potentially spreading ticks due to global warming has become a significant issue. The city of Nantong in this study is situated along the East Asia-Australasian Flyway (EAAF), with numerous wetlands serving as roosting sites for migratory birds. We conducted an investigation of hard ticks and determined the phylogenetic characteristics of tick species in this city. We utilized three different genes for our study: the mitochondrial cytochrome oxidase subunit 1 (COX1) gene, the second internal transcribed spacer (ITS2), and the mitochondrial small subunit rRNA (12 S rRNA) gene. The predominant tick species were Haemaphysalis flava (H. flava) and Haemaphysalis longicornis (H. longicornis). Additionally, specimens of Haemaphysalis campanulata (H. campanulata) and Rhipicephalus sanguineus (R. sanguineus) were collected. The H. flava specimens in this study showed a close genetic relationship with those from inland provinces of China, as well as South Korea and Japan. Furthermore, samples of H. longicornis exhibited a close genetic relationship with those from South Korea, Japan, Australia, and the USA, as well as specific provinces in China. Furthermore, R. sanguineus specimens captured in Nantong showed genetic similarities with specimens from Egypt, Nigeria, and Argentina.

pH-Dependent Reversible Self-Assembly of ß-Lactoglobulin-Derived Reducing Peptides.

Peptide-based self-assembled nanostructures are emerging vehicles for nutrient delivery and interface engineering. The present study screened eight ß-lactoglobulin (ß-Lg) derived peptides and found that two reducing peptides [EQSLVCQCLV (EV-10) and VCQCLVR (VR-7)] demonstrated pH-dependent reversible fibrilization. EV-10 formed fibrils at pH 2.0 but became unordered aggregates at pH 7.0. VR-7 showed the opposite trend. Both peptides could undergo repetitive transitions between fibrils and unordered aggregates during consecutive pH-cycling. Fibrilization of both peptides was dominated by charges carried by N- and C-terminals. Both fibrils were characterized by a cross-ß sheet structure where the ß-sheet was arranged in an antiparallel manner. Fe3+ was reduced by Cys and EV-10 (pH 5.0 and 7.0) simultaneously upon mixing. In contrast, EV-10 fibrils released Fe3+ reducing capacity progressively, which were beneficial to long-term protection Fe2+. The EV-10 fibrils remained intact after simulated gastric digestion and finally dissociated after intestinal digestion. The results shed light on the mechanisms of fibrilization of ß-Lg derived peptides. This study was beneficial to the rational design of smart pH-responsive materials for drug delivery and antioxidants for nutrients susceptible to oxidation.

3D printed osteochondral scaffolds: design strategies, present applications and future perspectives.

Articular osteochondral (OC) defects are a global clinical problem characterized by loss of full-thickness articular cartilage with underlying calcified cartilage through to the subchondral bone. While current surgical treatments can relieve pain, none of them can completely repair all components of the OC unit and restore its original function. With the rapid development of three-dimensional (3D) printing technology, admirable progress has been made in bone and cartilage reconstruction, providing new strategies for restoring joint function. 3D printing has the advantages of fast speed, high precision, and personalized customization to meet the requirements of irregular geometry, differentiated composition, and multi-layered boundary layer structures of joint OC scaffolds. This review captures the original published researches on the application of 3D printing technology to the repair of entire OC units and provides a comprehensive summary of the recent advances in 3D printed OC scaffolds. We first introduce the gradient structure and biological properties of articular OC tissue. The considerations for the development of 3D printed OC scaffolds are emphatically summarized, including material types, fabrication techniques, structural design and seed cells. Especially from the perspective of material composition and structural design, the classification, characteristics and latest research progress of discrete gradient scaffolds (biphasic, triphasic and multiphasic scaffolds) and continuous gradient scaffolds (gradient material and/or structure, and gradient interface) are summarized. Finally, we also describe the important progress and application prospect of 3D printing technology in OC interface regeneration. 3D printing technology for OC reconstruction should simulate the gradient structure of subchondral bone and cartilage. Therefore, we must not only strengthen the basic research on OC structure, but also continue to explore the role of 3D printing technology in OC tissue engineering. This will enable better structural and functional bionics of OC scaffolds, ultimately improving the repair of OC defects.

Protective effect of scallop-derived plasmalogen against vascular dysfunction, via the pSTAT3/PIM1/NFATc1 axis, in a novel mouse model of Alzheimer's disease with cerebral hypoperfusion.

A strong relationship between Alzheimer's disease (AD) and vascular dysfunction has been the focus of increasing attention in aging societies. In the present study, we examined the long-term effect of scallop-derived plasmalogen (sPlas) on vascular remodeling-related proteins in the brain of an AD with cerebral hypoperfusion (HP) mouse model. We demonstrated, for the first time, that cerebral HP activated the axis of the receptor for advanced glycation endproducts (RAGE)/phosphorylated signal transducer and activator of transcription 3 (pSTAT3)/provirus integration site for Moloney murine leukemia virus 1 (PIM1)/nuclear factor of activated T cells 1 (NFATc1), accounting for such cerebral vascular remodeling. Moreover, we also found that cerebral HP accelerated pSTAT3-mediated astrogliosis and activation of the nucleotide-binding domain and leucine-rich repeat protein 3 (NLRP3) inflammasome, probably leading to cognitive decline. On the other hand, sPlas treatment attenuated the activation of the pSTAT3/PIM1/NFATc1 axis independent of RAGE and significantly suppressed NLRP3 inflammasome activation, demonstrating the beneficial effect on AD.

Mechanical property of Ti6Al4V cylindrical porous structure for dental implants fabricated by selective laser melting.

The commonly used titanium alloy dental implants currently apply solid structures. However, issues such as stress shielding and stress concentration may arise due to the significant difference in elastic modulus between the implant and host. In order to address these problems, this paper proposes five porous structures based on the Gibson-Ashby theoretical model. We utilized selective laser melting technology to shape a porous structure using Ti-6Al-4V material precisely. The mechanical properties of the porous structure were verified through simulation and compression experiments. The optimal porous structure, which best matched the human bone, was a circular ring structure with a pillar diameter of 0.6 mm and a layer height of 2 mm. The stress and strain of the porous implant on the surrounding cortical and cancellous bone under different biting conditions were studied to verify the effectiveness of the optimal circular ring porous structure in alleviating stress shielding in both standard and osteoporotic bone conditions. The results confirm that the circular ring porous structure meets implant requirements and provides a theoretical basis for clinical dental implantation.

Association of polymorphisms in the heparanase gene (HPSE) with hepatocellular carcinoma in Chinese populations

Abstract Heparanase activity is involved in cancer growth and development in humans and single nucleotide polymorphisms (SNPs) in the heparanase gene (HPSE) have been shown to be associated with tumors. In this study, we investigated whether SNPs in HPSE were a risk factor for hepatocellular carcinoma (HCC) by undertaking a comprehensive haplotype-tagging, case-control study. For this, six haplotype-tagging SNPs (htSNPs) in HPSE were genotyped in 400 HCC patients and 480 controls by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis. A log-additive model revealed significant correlations between the HPSE polymorphisms rs12331678 and rs12503843 and the risk of HCC in the overall samples (p = 0.0046 and p = 0.0055). When the analysis was stratified based on hepatitis B virus (HBV) carrier status, significant interactions between rs12331678 and rs12503843 and HBV were observed. Conditional logistic regression analysis for the independent effect of one significant SNP suggested that rs12331678 or rs12503843 contributed an independent effect to the significant association with the risk of HCC, respectively. Our findings suggest that the SNPs rs12331678 and rs12503843 are HCC risk factors, although the potential functional roles of these two SNPs remain to be fully elucidated.