Metal bacteriochlorins which act as dual singlet oxygen and superoxide generators.

A series of stable free-base, Zn(II) and Pd(II) bacteriochlorins containing a fused six- or five-member diketo- or imide ring have been synthesized as good candidates for photodynamic therapy sensitizers, and their electrochemical, photophysical, and photochemical properties were examined. Photoexcitation of the palladium bacteriochlorin affords the triplet excited state without fluorescence emission, resulting in formation of singlet oxygen with a high quantum yield due to the heavy atom effect of palladium. Electrochemical studies revealed that the zinc bacteriochlorin has the smallest HOMO-LUMO gap of the investigated compounds, and this value is significantly lower than the triplet excited-state energy of the compound in benzonitrile. Such a small HOMO-LUMO gap of the zinc bacteriochlorin enables intermolecular photoinduced electron transfer from the triplet excited state to the ground state to produce both the radical cation and the radical anion. The radical anion thus produced can transfer an electron to molecular oxygen to produce superoxide anion which was detected by electron spin resonance. The same photosensitizer can also act as an efficient singlet oxygen generator. Thus, the same zinc bacteriochlorin can function as a sensitizer with a dual role in that it produces both singlet oxygen and superoxide anion in an aprotic solvent (benzonitrile).

Porphyrin-diones and porphyrin-tetraones: reversible redox units being localized within the porphyrin macrocycle and their effect on tautomerism.

Porphyrin-2,3-diones and porphyrin-2,3,7,8- and porphyrin-2,3,12,13-tetraones were shown to have a redox-active unit that can function independently of the macrocycle at large. Electroreduction of 5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)porphyrin-2,3-diones [(P-dione)M] and the corresponding -2,3,12,13-tetraones [L-(P-tetraone)M] and -2,3,7,8-tetraones [C-(P-tetraone)M], where M = 2H, CuII, ZnII, NiII, and PdII was investigated and the products were characterized by ESR and thin-layer UV-visible spectroelectrochemistry. Electrochemical and spectroelectrochemical data show that the first two reductions of the porphyrin-diones and the first three reductions of the porphyrin-tetraones occur at the dione units. This was confirmed by ESR spectra of first reduction products which show that the electron spin is totally localized on a semidione unit, independent of the central metal ion and of the number and location of dione units. ESR spectra of the radical anions derived from free-base porphyrin-2,3-dione [(P-dione)2H] and porphyrin-2,3,12,13-tetraone [L-(P-tetraone)2H] confirm the trans-arrangement of the two inner protons and their location on nonsubstituted pyrrolic rings, thereby maintaining an 18-atom 18-pi electron bacteriochlorin-like aromatic delocalization pathway. The redox unit is not similarly isolated in the corner free-base porphyrin-2,3,7,8-tetraone [C-(P-tetraone)2H]. A one-electron reduction of C-(P-tetraone)2H leads to the formation of a tautomer with trans inner hydrogens with one residing on the N of the ring with the reduced unit as the only detectable product. This process is favorable because it creates a more delocalized 18-atom 18-pi electron aromatic pathway. This result is consistent with the measured redox potentials which show the first reduction of C-(P-tetraone)2H to be substantially easier than (P-dione)2H or L-(P-tetraone)2H.

Electrochemistry and spectroelectrochemistry of heterobimetallic porphyrin-corrole dyads. Influence of the spacer, metal ion, and oxidation state on the pyridine binding ability.

Combined electrochemical and UV-visible spectroelectrochemical methods were utilized to elucidate the prevailing mechanisms for electroreduction of previously synthesized porphyrin-corrole dyads of the form (PCY)H2Co and (PCY)MClCoCl where M = Fe(III) or Mn(III), PC = porphyrin-corrole, and Y is a bridging group, either biphenylenyl (B), 9,9-dimethylxanthenyl (X), anthracenyl (A), or dibenzofuranyl (O). These studies were carried out in pyridine, conditions under which the cobalt(IV) corrole in (PCY)MClCoCl is immediately reduced to its Co(III) form, thus enabling direct comparisons with the free-base porphyrin dyad, (PCY)H2Co(III) under the same solution conditions. The compounds are all reduced in multiple one-electron-transfer steps, the first of which involves the M(III)/M(II) process of the porphyrin in the case of (PCY)MClCoCl and the Co(III)/Co(II) process of the corrole in the case of (PCY)H2Co. Each metal-centered redox reaction may be accompanied by the gain or loss of pyridine axial ligands, with the exact stoichiometry of the exchange process depending upon the specific combination of metal ions in the dyad, their oxidation states, and the particular spacer in the complex. Before this study was started, it was expected that the porphyrin-corrole dyads with the largest spacers, namely, O and A, would readily accommodate the formation of cobalt(III) bis-pyridine adducts because of the larger size of the cavity while dyads with the smallest B spacer would seem to have insufficient room to add even a single pyridine within the cavity, as was structurally seen in the case of (PCB)H2Co(py). This is clearly not the case, as shown in the present study. A reversible Co(III)/Co(II) reaction is seen for (PCB)MnClCoCl at -0.62 V, which when combined with spectroscopic data, leads to the assignment of (PCB)Mn(III)(py)2Co(III)(py) as the species in pyridine. The reduction of (PCB)Mn(III)(py)2Co(III)(py) to (PCB)Mn(II)(py)Co(III)(py) is accompanied on the slower spectroelectrochemical time scale by the appearance of a 603 nm band in the UV-vis spectra and is consistent with the addition of a second pyridine ligand to the Co(III)(py) unit of the dyad as one ligand is lost from the electrogenerated manganese(II) porphyrin, thus maintaining one pyridine ligand within the cavity. A different change in the coordination number is observed in the case of (PCB)FeClCoCl. Here the initial Fe(III) complex can be assigned as (PCB)Fe(III)ClCo(III)(py), which has no pyridine molecule within the cavity and the singly reduced form is characterized as (PCB)Fe(II)(py)2Co(III)(py)2, which contains two pyridine ligands inside the cavity. A following one-electron reduction of the Fe(II)/Co(III) complex then gives [(PCB)Fe(II)(py)2Co(II)]-.

Electrochemistry, spectroelectrochemistry, chloride binding, and O2 catalytic reactions of free-base porphyrin-cobalt corrole dyads.

Three face-to-face linked porphyrin-corrole dyads were investigated as to their electrochemistry, spectroelectrochemistry, and chloride-binding properties in dichloromethane or benzonitrile. The same three compounds were also investigated as to their ability to catalyze the electroreduction of dioxygen in aqueous 1 M HClO4 or HCl when adsorbed on a graphite electrode. The characterized compounds are represented as (PCY)H2Co, where P = a porphyrin dianion; C = a corrole trianion; and Y = a biphenylenyl, 9,9-dimethylxanthenyl, or anthracenyl spacer, which links the two macrocycles in a face-to-face arrangement. An axial binding of one or two Cl- ligands to the cobalt center of the corrole is observed for singly and doubly oxidized (PCY)H2Co, with the exact stoichiometry of the reaction depending upon the spacer size and the concentration of Cl- added to solution. No Cl- binding occurs for the neutral or reduced forms of the dyad, which contrasts with what is seen for the monocorrole, (Me4Ph5Cor)Co, where a single Cl- ligand is added to the Co(III) corrole in PhCN. The Co(III) form of the corrole in (PCY)H2Co also appears to be the catalytically active species in the electroreduction of dioxygen, which occurs at potentials associated with the Co(IV)/Co(III) reaction, that is, 0.35 V in 1 M HClO4 as compared to 0.31-0.42 V for the same three dyads in PhCN and 0.1 M TBAP. The potential for the catalytic electroreduction of O2 in HCl shifts negatively by 60 to 70 mV as compared to E(1/2) values in 1 M HClO4, consistent with the binding of Cl- to the Co(IV) form of the corrole and its rapid dissociation after electroreduction to Co(III) at the electrode surface.

Synthesis, characterization, and physicochemical properties of manganese(III) and manganese(V)-oxo corrolazines.

The structural and physicochemical properties of the manganese-corrolazine (Cz) complexes (TBP8Cz)Mn(V)O (1) and (TBP8Cz)Mn(III) (2) (TBP = p-tert-butylphenyl) have been determined. Recrystallization of 2 from toluene/MeOH resulted in the crystal structure of (TBP8Cz)Mn(III)(CH3OH) (2 x MeOH). The packing diagram of 2 x MeOH reveals hydrogen bonds between MeOH axial ligands and meso N atoms of adjacent molecules. Solution binding studies of 2 with different axial ligands (Cl-, Et3PO, and Ph3PO) reveal strong binding, corroborating the preference of the Mn(III) ion for a five-coordinate environment. High-frequency and field electron paramagnetic resonance (HFEPR) spectroscopy of solid 2 x MeOH shows that 2 x MeOH is best described as a high-spin (S = 2) Mn(III) complex with zero-field splitting parameters typical of corroles. Structural information on 1 was obtained through an X-ray absorption near-edge structure (XANES)/extended X-ray absorption fine structure (EXAFS) study and compared to XANES/EXAFS data for 2 x MeOH. The XANES data for 1 shows an intense pre-edge transition characteristic of a high-valent metal-oxo species, and a best fit of the EXAFS data gives a short Mn-O bond distance of 1.56 A, confirming the structure of the metal-oxo unit in 1. Detailed spectroelectrochemical studies of 1 and 2 were performed revealing multiple reversible redox processes for both complexes, including a relatively low potential for the Mn(V) --> Mn(IV) process in 1 (near 0.0 V vs saturated calomel reference electrode). Chemical reduction of 1 results in the formation of a Mn(III)Mn(IV)(mu-O) dimer as characterized by electron paramagnetic resonance spectroscopy.

Heterobimetallic complexes of cobalt(IV) porphyrin-corrole dyads. Synthesis, physicochemical properties, and X-ray structural characterization.

The synthesis of a novel family of heterobinuclear cofacial biphenylene (B), anthracene (A), 9,9-dimethylxanthene (X), or dibenzofuran (O) bridged porphyrin-corrole complexes, (PCY)MClCoCl, is reported, M being either an iron(III) or manganese(III) ion. Each complex was characterized by electrochemistry, mass spectrometry, UV-vis, IR, and electron spin resonance spectroscopy. Unlike previously examined biscobalt porphyrin-corrole dyads, the cobalt ion of the corrole moiety is present in a high-valence +4 oxidation state, as proven by electrochemistry, spectroelectrochemistry, and an X-ray diffraction study of (PCB)FeClCoCl, which shows the presence of a bound Cl- anion on the cobalt corrole. Structural data: (PCB)FeClCoCl x 0.5(C7H16) x 0.5(CH2Cl2) x 2H2O, triclinic, space group P1, a = 13.8463(3) A, b = 16.8164(5) A, c = 17.9072(6) A, alpha = 93.780(1) degrees, beta = 111.143(1) degrees, gamma = 97.463(2) degrees, Z = 2.

Porphyrazines with annulated diazepine rings. 2. Alternative synthetic route to tetrakis-2,3-(5,7-diphenyl-1,4-diazepino)porphyrazines: new metal complexes, general physicochemical data, ultraviolet-visible linear and optical limiting behavior, and electrochemical and spectroelectrochemical properties.

Following a previous report on the synthesis and physicochemical characterization of a novel class of porphyrazines carrying peripherally annulated seven-membered rings, i.e., tetrakis-2,3-(5,7-diphenyl-1,4-diazepino)porphyrazine [Ph(8)DzPzH(2)].4H(2)O and its metal derivatives [Ph(8)DzPzM].xH(2)O (x = 2-7, M = Mg(II)(H(2)O), Cu(II), and Zn(II)), a new more convenient procedure is reported here, allowing the preparation in high yields of the Li(I) and Na(I) derivatives of formulas [Ph(8)DzPzLi(2)].5H(2)O and [Ph(8)DzPzNa(2)].6H(2)O, which can be directly converted into other metal derivatives under mild conditions (room temperature) and in good yields. The series studied has been extended to include the Mn(II) and Co(II) complexes also reported here for the first time. Physicochemical characterization of the new "diazepinoporphyrazines" was based on fast atom bombardment (FAB) mass spectrometry and X-ray powder patterns, infrared (IR), electron paramagnetic resonance (EPR), and room-temperature magnetic susceptibility measurements. A detailed discussion of the UV-vis spectra emphasizes the role played by the external diazepine rings in electron delocalization through their tautomeric or protonated forms present in neutral, basic, and acidic media. The nonlinear optical effect of optical limiting for the different species [M = 2H, Mg(II)(H(2)O), Mn(II), Co(II), Cu(II), and Zn(II)] has also been measured. It has been observed that the extent of the optical limiting depends on the specific M center. The observed nonlinear optical features are analyzed and discussed in terms of the electronic and magnetic properties exhibited by some of the metal ions and taking into account the model of the excited-state absorption in which the nature of M determines the kinetics of formation of the highly absorbing state of the specific complex examined. As evidenced by the detailed electrochemical and spectroelectrochemical study carried out on this new class of macrocycles, one of the most important aspects is the facilitated electron delocalization for the oxidized and reduced species allowed by a 1H-6Htautomerism taking place on the peripheral diazepine rings.