Fabrication of fluorescence probe based on molecularly imprinted polymers on red emissive biomass-derived carbon dots coupled with smartphone readout for tyramine determination in fermented meat products.

A fluorescence probe based on molecularly imprinted polymers on red emissive biomass-derived carbon dots (r-BCDs@MIPs) was developed to detect tyramine in fermented meat products. The red emissive biomass-derived carbon dots (r-BCDs) were synthesized by the one-step solvothermal method using discarded passion fruit shells as raw materials. The fluorescence emission peak of r-BCDs was at 670 nm, and the relative quantum yield (QY) was about 2.44%. Molecularly imprinted sensing materials were prepared with r-BCDs as fluorescent centers for the detection of trace tyramine, which showed a good linear response in the concentration range of tyramine from 1 to 40 µg L-1. The linear correlation coefficient was 0.9837, and the limit of detection was 0.77 µg L-1. The method was successfully applied to the determination of tyramine in fermented meat products, and the recovery was 87.17-106.02%. The reliability of the results was verified through high-performance liquid chromatography (HPLC). Furthermore, we combined the r-BCDs@MIPs with smartphone-assisted signal readout to achieve real-time detection of tyramine in real samples. Considering its simplicity and convenience, the method could be used as a rapid and low-cost promising platform with broad application prospects for on-site detection of trace tyramine with smartphone-assisted signal readout.

A smartphone-combined ratiometric fluorescence molecularly imprinted probe based on biomass-derived carbon dots for determination of tyramine in fermented meat products.

A ratiometric fluorescence molecularly imprinted probe employing two distinct emission wavelengths of biomass carbon dots was developed for highly selective and visual quantitative detection of tyramine in fermented meat products. The red emission biomass carbon dots were employed as responsive elements, and the blue ones were utilized as the reference elements. The molecularly imprinted polymers were incorporated in the ratiometric sensing to distinguish and adsorb tyramine. With the linear range of 1-60 µg/L, the ratiometric fluorescence molecularly imprinted probe was successfully applied to detect tyramine in real samples with the satisfactory recoveries of 79.74-112.12% and the detect limitation of 1.3 µg/kg, indicating that this probe has great potential applications for the detection of tyramine in real samples. Moreover, smartphone-based fluorescence signal recognition analysis on hand has been developed for the quantitative analysis of tyramine, providing a portable visual optical analysis terminal for rapid on-site determination of tyramine.

Nonflammable Phosphate-Based Electrolyte for Safe and Stable Potassium Batteries Enabled by Optimized Solvation Effect.

Current potassium-ion batteries (PIBs) are limited in safety and lifetime owing to the lack of suitable electrolyte solutions. To address these issues, herein, we report an innovative non-flammable electrolyte design strategy that leverages an optimal moderate solvation phosphate-based solvent which strikes a balance between solvation capability and salt dissociation ability, leading to superior electrochemical performance. The formulated electrolyte simultaneously exhibits the advantages of low salt concentration (only 0.6 M), low viscosity, high ionic conductivity, high oxidative stability, and safety. Our electrolyte also promotes the formation of self-limiting inorganic-rich interphases at the anode surface, alongside robust cathode-electrolyte interphase on iron-based Prussian blue analogues, mitigating electrode/electrolyte side reactions and preventing Fe dissolution. Notably, the PIBs employing our electrolyte exhibit exceptional durability, with 80 % capacity retention after 2,000 cycles at high-voltage of 4.2 V in a coin cell. Impressively, in a larger scale pouch cell, it maintains over 81 % of its initial capacity after 1,400 cycles at 1 C-rate with high average Coulombic efficiency of 99.6 %. This work represents a significant advancement toward the realization of safe, sustainable, and high-performance PIBs.

Fast detection of tryptamine in meat products with azide-functionalized covalent organic frameworks confined in molecularly imprinted polymers.

Tryptamine is a biogenic amine that affects organoleptic quality through the generation of off-odours in foods. Herein, imine-based covalent organic frameworks (COFs) were synthesized via Schiff base reactions and postmodified with click chemistry to generate azide-functionalized COFs with tunable azide units on the walls. The combination of molecular imprinting with COFs enabled the specific recognition of the targets. The resulting optosensing system (azide-functionalized COFs@MIPs) was used as a sample-to-answer analyser for detecting tryptamine (detection time within 10 min). A linear relationship was observed for the fluorescence response to tryptamine concentrations in the range of 3-120 µg L-1, with a limit of detection of 1.74 µg L-1. The recoveries for spiked samples were satisfactory, with relative standard deviations <9.90%. The optosensing system is a potential tool for the quantitative detection of tryptamine in meat products because of its lower cost, shorter processing time, and simpler processing steps compared to conventional chromatographic techniques.

Conjugated molecularly imprinted polymers based on covalent organic frameworks: Fluorescent sensing platform for specific capture of urea and elimination of ethyl carbamate.

This study described the preparation of an azide covalent organic framework-embedded molecularly imprinted polymers (COFs(azide)@MIPs) platform for urea adsorption and indirect ethyl carbamate (EC) removal from Chinese yellow rice wine (Huangjiu). By modifying the pore surface of COFs using the copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction, COFs(azide) with a high fluorescence quantum yield and particular recognition ability were inventively produced. In order to selectively trap urea, the COFs(azide) were encased in an imprinted shell layer via imprinting technology. With a detection limit (LOD) of 0.016 µg L-1 (R2 = 0.9874), the COFs(azides)@MIPs demonstrated a good linear relationship with urea in the linear range of 0-5 µg L-1. Using real Huangjiu samples, the spiking recovery trials showed the viability of this sensing platform with recoveries ranging from 88.44 % to 109.26 % and an RSD of less than 3.40 %. The Huangjiu processing model system achieved 38.93 % EC reduction by COFs(azides)@MIPs. This research will open up new avenues for the treatment of health problems associated with fermented alcoholic beverages, particularly Huangjiu, while also capturing and removing hazards coming from food.

Restructuring Electrolyte Solvation by a Partially and Weakly Solvating Cosolvent toward High-Performance Potassium-Ion Batteries.

Ether-based electrolytes are among the most important electrolytes for potassium-ion batteries (PIBs) due to their low polarization voltage and notable compatibility with potassium metal. However, their development is hindered by the strong binding between K+ and ether solvents, leading to [K+-solvent] cointercalation on graphite anodes. Herein, we propose a partially and weakly solvating electrolyte (PWSE) wherein the local solvation environment of the conventional 1,2-dimethoxyethane (DME)-based electrolyte is efficiently reconfigured by a partially and weakly solvating diethoxy methane (DEM) cosolvent. For the PWSE in particular, DEM partially participates in the solvation shell and weakens the chelation between K+ and DME, facilitating desolvation and suppressing cointercalation behavior. Notably, the solvation structure of the DME-based electrolyte is transformed into a more cation-anion-cluster-dominated structure, consequently promoting thin and stable solid-electrolyte interphase (SEI) generation. Benefiting from optimized solvation and SEI generation, the PWSE enables a graphite electrode with reversible K+ (de)intercalation (for over 1000 cycles) and K with reversible plating/stripping (the K||Cu cell with an average Coulombic efficiency of 98.72% over 400 cycles) and dendrite-free properties (the K||K cell operates over 1800 h). We demonstrate that rational PWSE design provides an approach to tailoring electrolytes toward stable PIBs.

Sustainable Electrolytes: Design Principles and Recent Advances.

Today, rechargeable batteries are omnipresent and essential for our existence. In order to improve the electrochemical performance of electric fields, the introduction of electrolytes with fluorine (F)-based inorganic elemental compositions is a direction of exploration. However, most fluorocarbons have a high global warming potential and ozone depletion potential, which do not meet the sustainability requirements of the battery industry. Therefore, developing sustainable electrolytes is a viable option for future battery development. Although researchers have made much progress in electrolyte optimization, little attention has been paid to developing low-toxic and safe electrolytes. This review aims to elucidate the design principles and recent advances in this direction for solvents and salts. It concludes with a summary and outlook on future research directions for the molecular design of green electrolytes for practical high-voltage rechargeable batteries.

Photostimulus-Responsive Peptide Dot-Centered Covalent Organic Polymers: Effective Pesticide Sensing via Enhancing Accessibility.

Pesticide detection and monitoring are necessary for human health as the overapplication has serious consequences for environmental pollution. Herein, a proper modulation strategy was implemented to construct the photostimulus-responsive peptide-dot-centered covalent organic polymer (P-PCOP) nanoarchitecture for selective sensing of pesticides. The as-constructed P-PCOP was prepared at room temperature by using amino-containing peptide dots as a building block instead of common organic molecules, and the merits of P-PCOP enable it to reduce the steric hindrance of recognition, enhance the interfacial contact of the target, and facilitate the accessibility of sites, which promises to improve the sensitivity. The P-PCOF exhibited a low detection limit of 0.38 µg L-1 to cartap over the range of 1-80 µg L-1 (R2 = 0.9845), and the recoveries percentage in real samples was estimated to be 93.39-105.82%. More importantly, the DFT calculation confirmed the selective recognition ability of P-PCOP on chemical pesticides. In conjunction with a smartphone-integrated portable reading device, on-site chemical sensing is achieved. The proper modulation strategy of fixing a functional guest on the COP system contributes to the advanced structure-chemical properties that are conducive to their applications in chemical sensing.

The timing of the initial collision between the South and North China blocks constraining from the sediments in the eastern Sichuan Basin.

In this study, detrital zircon U-Pb geochronology, trace element and Hf isotopic compositional data from the Early-Middle Triassic clastic rocks in the eastern Sichuan Basin were obtained to distinguish the sediment provenance and constrain the timing of the initial collision between the South China and North China blocks. Detrital zircons from the Early Triassic Feixianguan Formation clastic rocks yield one major age peak at 2476 Ma and three minor age peaks at 1886, 802 and 304 Ma. These detrital zircons may be derived from the South China Block. Detrital zircons from the Early Triassic Jialingjiang Formation clastic rocks yield multiple age peaks at 979, 856, 392 and 269 Ma, indicating a mixed sediment provenance from the South China Block and Qinling Orogenic Belt. This is the first appearance of the detritus with the Qinling Orogenic Belt affinity in the eastern Sichuan Basin. Detrital zircons from the Middle Triassic Leikoupo Formation clastic rocks yield two centralized age peaks at 447 and ca. 245 Ma. These zircons may mainly be derived from the Qinling Orogenic Belt. The results indicate an abrupt change in the detrital zircon U-Pb provenance from the South China Block to the Qinling Orogenic Belt during the Early-Middle Triassic. Integrating the provenance change and other geological characteristics, we suggest that the initial collision in the eastern Qinling Orogenic Belt occurred in the Early Triassic.

Green Ether Electrolytes for Sustainable High-voltage Potassium Ion Batteries.

Ether-based electrolytes are promising for secondary batteries due to their good compatibility with alkali metal anodes and high ionic conductivity. However, they suffer from poor oxidative stability and high toxicity, leading to severe electrolyte decomposition at high voltage and biosafety/environmental concerns when electrolyte leakage occurs. Here, we report a green ether solvent through a rational design of carbon-chain regulation to elicit steric hindrance, such a structure significantly reducing the solvent's biotoxicity and tuning the solvation structure of electrolytes. Notably, our solvent design is versatile, and an anion-dominated solvation structure is favored, facilitating a stable interphase formation on both the anode and cathode in potassium-ion batteries. Remarkably, the green ether-based electrolyte demonstrates excellent compatibility with K metal and graphite anode and a 4.2 V high-voltage cathode (200 cycles with average Coulombic efficiency of 99.64 %). This work points to a promising path toward the molecular design of green ether-based electrolytes for practical high-voltage potassium-ion batteries and other rechargeable batteries.

Nonfluorinated Antisolvents for Ultrastable Potassium-Ion Batteries.

A robust interface between the electrode and electrolyte is essential for the long-term cyclability of potassium-ion batteries (PIBs). An effective strategy for achieving this objective is to enhance the formation of an anion-derived, robust, and stable solid-electrolyte interphase (SEI) via electrolyte structure engineering. Herein, inspired by the application of antisolvents in recrystallization, we propose a nonfluorinated antisolvent strategy to optimize the electrolyte solvation structure. In contrast to the conventional localized superconcentrated electrolyte introducing high-fluorinated ether solvent, the anion-cation interaction is considerably enhanced by introducing a certain amount of nonfluorinated antisolvent into a phosphate-based electrolyte, thereby promoting the formation of a thin and stable SEI to ensure excellent cycling performance of PIBs. Consequently, the nonfluorinated antisolvent electrolyte exhibits superior stability in the K||graphite cell (negligible capacity degradation after 1000 cycles) and long-term cycling in the K||K symmetric cell (>2200 h), as well as considerably improved oxidation stability. This study demonstrates the feasibility of optimized electrolyte engineering with a nonfluorinated antisolvent, providing an approach to realizing superior electrochemical energy storage systems in PIBs.

Variations in dissolved oxygen and aquatic biological responses in China's coastal seas.

Coastal areas can represent an ecological transition zone with the function of biodiversity conservation, and good water quality is fundamental to maintaining this function. In this study, we analyzed data from 2011 to 2020 to reveal the variation in dissolved oxygen (DO) and the aquatic biological response in China's coastal seas. Results showed that DO in coastal waters exhibited an upward trend from 2011 to 2020 because of reduction in terrestrial anthropogenic pollutant (TAP) input. In comparison with DO in other seas, the DO content in the East China Sea was lower owing to higher TAP input, i.e., the proportion of DO of <5 mg L-1 accounted for approximately 60% of the total. Species numbers, density, and the species diversity index of phytoplankton, zooplankton, and macrobenthos were different in the different sea areas because phytoplankton, zooplankton, and macrobenthos have different responses to changes in DO. In comparison with the species numbers of zooplankton and macrobenthos, the species numbers of phytoplankton were more significantly related to DO, and showed a negative linear relationship with a better DO environment (DO ≥ 5 mg L-1; r2 = 0.39, p < 0.01) and positive correlation with a poor DO environment (DO < 3 mg L-1; r2 = 0.52, p < 0.01). A better DO environment is conducive to increased density of macrobenthos. Studies have shown that a good DO environment contributes to coastal ecosystem health, and continuous control of TAP input is an effective means of ensuring DO recovery.

Fluorescent Molecularly Imprinted Polymers Loaded with Avenanthramides for Inhibition of Advanced Glycation End Products.

Encapsulating bioactive avenanthramides (AVAs) in carriers to respond to the environmental changes of food thermal processing allows the controlled release of AVAs for the effective inhibition of biohazards. In this study, fluorescent molecular imprinted polymers (FMIPs) loaded with AVAs were prepared by reverse microemulsion. The fluorescent signal was generated by carbon dots (CDs), which were derived from oat bran to determine the load of AVAs. The FMIPs were uniformly spherical in appearance and demonstrated favorable properties, such as thermal stability, protection of AVAs against photodegradation, high encapsulation efficiency, and effective scavenging of free radicals. After consideration of the different kinetics models, the release of AVAs from the FMIPs matched the Weibull model and followed a Fickian diffusion mechanism. The FMIPs exhibited good inhibition of pyrraline in a simulated casein-ribose system and in milk samples, indicating the release of AVAs could inhibit the generation of pyrraline.

Dandelion-like covalent organic frameworks with high-efficiency fluorescence for ratiometric sensing and visual tracking-by-detection of Fe3.

Iron ions, one of the most common heavy metal pollutants in industrial waste materials, are continuously actively or passively delivered to the environment. Meanwhile, the importance of Fe3+ in biological processes in vivo can not be neglected due to its crucial role in maintaining normal physiological function. Therefore, a ratiometric fluorescence covalent organic framework (TD-COF) was constructed for tracking-by-detection of Fe3+. Alkynes-extended 1,3,6,8-tetrakis(4-ethynyl benzaldehyde)-pyrene (TEBPY) with complete planar structure and 2,5-dihydroxyterephthalohydrazide (DHTH) with functional group -OH were selected as the building blocks. The ratiometric fluorescence TD-COF with a dandelion-like structure exhibited its dual emission peaked at 510 nm and 630 nm. It displayed an obvious fluorescence color variation of yellow-red-black in the presence of Fe3+. Benefiting from the high luminescent efficiency (QY of 36.4%) and multiple identical binding sites, TD-COF exhibited a wide linear range to Fe3+ (0.005-50 µM) with a detection limit of 10.9 nM. Additionally, a smartphone visual sensing platform integrated with TD-COF was developed based on the color transformation and successfully applied to visual smart real-time monitoring Fe3+. More surprisingly, the maximum adsorption capacity of TD-COF towards Fe3+ was 833.3 mg/g due to the coordination interaction and cationic π-effect. The practicability of the smartphone-integrated ratiometric sensing platform for visual tracking-by-detection of Fe3+ was verified by choosing tap water as the actual sample, and the recoveries were calculated to be 98.71-100.88%. This work thus developed COF-based ratiometric sensing of Fe3+, which is an attractive candidate for further application in fluorescent sensing and visual monitoring.

Red-to-blue colorimetric probe based on biomass carbon dots for smartphone-integrated optosensing of Cu(II) and L-cysteine.

We constructed a smartphone-integrated optosensor with inexpensive, reversible, environmental friendly, and rapid adsorption to detect Cu(II) and L-cysteine (L-Cys). The key part of this study was to prepare a red-to-blue colorimetric probe from herbaceous andrographis paniculata using one-pot polymerization at room temperature. When Cu(II) existed, the red fluorescence on the surface of the core-shell probe was quenched, while the blue fluorescence of the core did not respond, because the colorimetric probe interacted with the Cu(II) on the surface of red CDs. After L-Cys added, it interacted with the Cu(II) to strip it from the surface of red CDs, resulting in the recovery of fluorescence response. Under optimal conditions, the detection limits of this method for Cu(II) and L-Cys were 71 nM and 12 nM, respectively. Further, the red-to-blue colorimetric probe was integrated into smartphone with a software application to convert fluorescent color images into specific red (R), green (G), and blue (B) values. The spiked recovery of Cu(II) and L-Cys in lake water was verified the feasibility of the developed optosensors with a recovery of 98.2-101.6 % and 103.3-121.6 %. This method for detecting Cu(II) and L-Cys can not only recognize metal ions from actual samples, but also effectively protect CDs from quenching and restore fluorescence.

Peptide-Based Molecularly Imprinted Polymer: A Visual and Digital Platform for Specific Recognition and Detection of Ethyl Carbamate.

A visual and digital platform was constructed by peptide-based molecularly imprinted polymers (PMIPs) for specific recognition and detection of ethyl carbamate (EC). Here, the optosensing core was creatively constructed by the covalent assembly of dipeptides (H-Phe-Phe-OH) and genipin biomolecules for high fluorescence quantum yield and dual-signal response capability. MIPs were wrapped in the shell of the optosensing core for selectivity of EC from actual samples of alcoholic beverages. The genipin-FF nanoparticles (GFPNs)@PMIPs exhibited dual-band red-blue fluorescence image with a low detection limit of 0.817 and 1.65 µg L-1, respectively, in the optimal linear range of 2-240 µg L-1. The accuracy of this method was verified by the spiked recovery experiment, and a good recovery from 83.97 to 106.75% of the proposed optosensing method was obtained. In addition, a smartphone application was coupled with GFPNs@PMIPs to realize online real-time detection of EC. With the addition of EC, the color change of G and B values was negligible compared with the R value. This work also provides a potential method for on-site visual detection of analytes.

A Robust Ratiometric Fluorescent Sensor Based on Covalent Assembly of Dipeptides and Biomolecules for the High-Sensitive and Optosmart Detection of Pyrethroids.

In this study, two ultrashort dipeptides, diphenylalanine (FF) or C-terminal amidated diphenylalanine (DPA), were covalently self-assembled with genipin to obtain two well-defined supramolecular peptide nanoparticles for the detection of pyrethroids. DPA-genipin nanoparticles (PNPs) demonstrated excellent dual-emission fluorescence characteristics, tunable particle size, and robust photostability. Parallel to this, PNPs showed a ratiometric fluorescence response to λ-cyhalothrin (LC) with a distinct green-to-red color transition. The satisfactory self-calibration capability of the ratiometric system enabled PNPs to respond sensitively to LC in a wide range (5-800 µg/L) with a lower limit of detection of 0.034 µg/L. The introduction of a smartphone application made it easy to develop an intelligent evaluation platform based on PNPs, which had been proven to be applicable for on-site visualization of LC in agricultural products. The platform proposed here may be a new application of peptide self-assembly in sensing, with both important food safety implications and great economic value.

Energy-efficient Preparation of Amino and Sulfhydryl Functionalized Biomass Carbon Dots via a Reverse Microemulsion for Specific Recognition of Fe3+ and L-cysteine.

Amino- and sulfhydryl- functionalized biomass carbon dots (BCDs) were prepared by one-pot reverse microemulsion for specific recognition of ferric ions (Fe3+) and L-cysteine (L-Cys). Green grapefruit peel was used as the carbon source while aminosilane and mercaptosilane were used as N- and S-supplier. Following the adsorption of Fe3+ on the surfaces of BCDs-NH2 and BCDs-SH, the fluorescence responses was quenched step by step, while adding L-Cys to the BCDs-NH2/Fe3+ system restored the fluorescence. The BCDs-NH2 and BCDs-SH system exhibited extremely low limits of detection for Fe3+ of 3.2 and 3.0 nM, respectively, within a wide linear ranges of 0.006-200 µM and 0.004-200 µM, respectively. The BCDs-NH2/Fe3+ systems were used as an optosensor for L-Cys in the concentration ranges of 0.08-30 and 30-1000 µM with a detection limit of 65 nM. Developed BCDs-NH2 and BCDs-SH were able to respond to Fe3+ in water samples with satisfactory recoveries of 100.1%-103.1% and 94.6%-108.5%, respectively, and the BCDs-NH2/Fe3+ system was also able to respond to BCDs-NH2/Fe3+ in actual lake water samples with recoveries from 87.3% to 98.8%. Meanwhile, The BCDs-NH2 exhibited good photoluminescence and stability, and the with a fluorescence quantum yield was as high as 25%. This work demonstrates the feasibility of using such materials to remove hazardous ions from water and employing the resulting complexes for optosensing in a sustainable manner.

Evaluation of water quality at national scale from 2011 to 2021: Advances and challenges.

More environmental policies and larger investments in protecting the aquatic environment in China have been made in the last decade than previously. It is important to assess how this will affect river water quality. Here, changes in water quality in China between 2011 and 2021 are assessed. Water bodies meeting class III or better defined in the Chinese Environmental Quality Standards for Surface Water (GB3838-2002) were labeled WQI, water bodies meeting class V or better but below class III were labeled WQII, and water bodies below class V were labeled WQIII. The percentage of WQI water bodies increased from 66.1 % in 2011 to 81.0 % in 2021, and the percentages of WQII and WQIII water bodies decreased between 2011 and 2021. The percentage of WQI water bodies increased more quickly and the percentage WQIII water bodies decreased more quickly after 2017 than between 2011 and 2016. The percentages of WQI water bodies in the Northwest River Basin (RB), Pearl RB, Southeast RB, Southwest RB, and Yangtze RB were >80 %, and were higher than the percentages of WQI water bodies in the other five RBs. The percentages of WQI and WQII water bodies increased but the percentage of WQIII water bodies decreased in the Hai RB. The percentage of WQI water bodies increased but the percentages of WQII and WQIII water bodies decreased in the Huai RB, Liao RB, Yangtze RB, and Yellow RB. The river monitoring capacity increased and pollution sources, particularly point sources, became more controlled, and this improved river water quality. River management in China has passed the first stage of controlling pollution sources after 10 years of centralized management. The next stage should be focused on strengthening control of non-point sources of pollution and rehabilitating ecological systems to improve river health.

Carbon Quantum Dots from Pomelo Peel as Fluorescence Probes for "Turn-Off-On" High-Sensitivity Detection of Fe3+ and L-Cysteine.

This study designed a "turn-off-on" fluorescence analysis method based on carbon quantum dots (CQDs) to detect metal ions and amino acids in real sample systems. CQDs were derived from green pomelo peel via a one-step hydrothermal process. The co-doped CQDs with N and S atoms imparted excellent optical properties (quantum yield = 17.31%). The prepared CQDs could be used as fluorescent "turn-off" probes to detect Fe3+ with a limit of detection of 0.086 µM, a linear detection range of 0.1-160 µM, and recovery of 83.47-106.53% in water samples. The quenched CQD fluorescence could be turned on after adding L-cysteine (L-Cys), which allowed detection of L-Cys with a detection limit of 0.34 µM and linear range of 0.4-85 µM. Recovery of L-Cys in amino acid beverage was 87.08-122.74%. Visual paper-based testing strips and cellulose/CQDs composite hydrogels could be also used to detect Fe3+ and L-Cys.