Multiagent Continual Coordination via Progressive Task Contextualization.

Cooperative multiagent reinforcement learning (MARL) has attracted significant attention and has the potential for many real-world applications. Previous arts mainly focus on facilitating the coordination ability from different aspects (e.g., nonstationarity and credit assignment) in single-task or multitask scenarios, ignoring the stream of tasks that appear in a continual manner. This ignorance makes the continual coordination an unexplored territory, neither in problem formulation nor efficient algorithms designed. Toward tackling the mentioned issue, this article proposes an approach, multiagent continual coordination via progressive task contextualization (MACPro). The key point lies in obtaining a factorized policy, using shared feature extraction layers but separated independent task heads, each specializing in a specific class of tasks. The task heads can be progressively expanded based on the learned task contextualization. Moreover, to cater to the popular centralized training with decentralized execution (CTDE) paradigm in MARL, each agent learns to predict and adopt the most relevant policy head based on local information in a decentralized manner. We show in multiple multiagent benchmarks that existing continual learning methods fail, while MACPro is able to achieve close-to-optimal performance. More results also disclose the effectiveness of MACPro from multiple aspects, such as high generalization ability.

Cost-Effectiveness Analysis of Adalimumab Versus Cyclosporine for Vogt-Koyanagi-Harada Disease: A Randomized Controlled Study.

PURPOSE: To compare the 26-week cost-effectiveness of adalimumab-corticosteroids (ADA-CS) and cyclosporine-corticosteroids (CSA-CS) for Vogt-Koyanagi-Harada (VKH). METHODS: A preplanned cost-effectiveness analysis based on the per-protocol population of a randomized-controlled trial. VKH subjects were randomized to receive either cyclosporine (100-200 mg daily) combined with corticosteroids or adalimumab (40 mg twice monthly) combined with corticosteroids. The primary outcome of this cost-effectiveness study was the incremental cost-effectiveness ratio (ICER). Costs and quality-adjusted life-years (QALYs) data were calculated by the medical records and health utility, respectively. Subgroup (early and late-phase VKH) analysis and sensitivity analyses were performed. RESULTS: The ICER at 26 weeks was $62,425/QALY for the total participants. Compared to the CSA-CS group, costs in the ADA-CS group were more expensive (mean difference [ΔA-C]: $2,497) with more gains in QALYs (mean difference [ΔA-C]: 0.04). The probability of ADA-CS being cost-effective was 0.17 and 0.41 at willingness to pay (WTP) thresholds of $12,000/QALY and $36,000/QALY, respectively. Subgroup analysis and sensitivity analyses showed consistent findings with the primary analysis. CONCLUSIONS: Regardless of early or late-phase VKH, the CSA-CS strategy may be recommended as the preferred initial choice for the majority of VKH.

Neonicotinoid insecticides in paddy fields: Dissipation dynamics, migration, and dietary risk.

Neonicotinoid insecticides (NNIs) have caused widespread contamination of multiple environmental media and posed a serious threat to ecosystem health by accidently injuring non-target species. This study collected samples of water, soil, and rice plant tissues in a water-soil-plant system of paddy fields after spaying imidacloprid (IMI), thiamethoxam (THM), and clothianidin (CLO) to analyze their distribution characteristics and migration procedures and to assess related dietary risks of rice consumption. In the paddy water, the concentrations of NNIs showed a dynamic change of increasing and then decreasing during about a month period, and the initial deposition of NNIs showed a trend of CLO (3.08 µg/L) > THM (2.74 µg/L) > IMI (0.97 µg/L). In paddy soil, the concentrations of the three NNIs ranged from 0.57 to 68.3 ng/g, with the highest residual concentration at 2 h after application, and the concentration trend was opposite to that in paddy water. The initial deposition amounts of IMI, THM, and CLO in the root system were 5.19, 3.02, and 5.24 µg/g, respectively, showing a gradual decrease over time. In the plant, the initial deposition amounts were 19.3, 9.36, and 52.6 µg/g for IMI, THM, and CLO, respectively, exhibiting concentration trends similar to those in the roots. Except for IMI in soil, the dissipation of the NNIs conformed to the first-order kinetic equation in paddy water, soil, and plant. The results of bioconcentration factors (BCFs) and translocation factor (TF) indicated that NNIs can be bi-directionally transported in plants through leaf absorption and root uptake. The risk of NNIs intake through rice consumption was low for all age groups, with a slightly higher risk of exposure in males than in females.

Visible-Light Harvesting SrTiO3 Solid Solutions for Photocatalytic Hydrogen Evolution from Water.

The fabrication of solid solutions represents a compelling approach to modulating the physicochemical properties of materials. In this study, we achieved the successful synthesis of solid solutions comprising SrTiO3 and SrTaO2N (denoted as (SrTiO3)1-x-(SrTaO2N)x, 0≤x≤1) using the magnesium powder-assisted nitridation method. The absorption edge of (SrTiO3)1-x-(SrTaO2N)x is tunable from 500 to 600 nm. The conduction band minimum (CBM) of (SrTiO3)1-x-(SrTaO2N)x comprises the Ti 3d orbitals and the Ta 5d orbitals, while the valence band maximum (VBM) consists of the O 2p and N 2p orbitals. The microstructure of the (SrTiO3)1-x-(SrTaO2N)x consists of small nanoparticles, exhibiting a larger specific surface area than the parent compounds of SrTiO3 and SrTaO2N. In the photocatalytic hydrogen evolution reaction (HER) with sacrificial reagents, the activity of solid solutions is notably superior to that of nitrogen-doped SrTiO3 and SrTaO2N. This superiority is mainly attributed to its broad light absorption range and high charge separation efficiency, which indicates its potential as a promising photocatalytic material. Moreover, the magnesium powder-assisted nitridation method exhibits obvious advantages for the synthesis of oxynitrides and bears instructional significance for the synthesis of other nitrogen-containing compounds and even sulfur-containing compounds.

Enhanced Electron Delocalization Induced by Ferromagnetic Sulfur doped C 3 N 4 Triggers Selective H 2 O 2 Production.

For the 2D metal-free carbon catalysts, the atomic coplanar architecture enables a large number of pz orbitals to overlap laterally, thus forming π-electron delocalization, and the delocalization degree of the central atom dominates the catalytic activity. Herein, designing sulfur-doped defect-rich graphitic carbon nitride (S-Nv-C3N4) materials as a model, we propose a strategy to promote localized electron polarization by enhancing the ferromagnetism of ultra-thin 2D carbon nitride nanosheets. The introduction of sulfur (S) further promotes localized ferromagnetic coupling, thereby inducing long-range ferromagnetic ordering and accelerating the electron interface transport. Meanwhile, the hybridization of sulfur atoms breaks the symmetry and integrity of the unit structure, promotes electron enrichment and stimulating electron delocalization at the active site. This optimization enhances the *OOH desorption, providing a favorable kinetic pathway for the production of hydrogen peroxide (H2O2). Consequently, S-Nv-C3N4 exhibits high selectivity (>95%) and achieves a superb H2O2 production rate, approaching 4374.8 ppm during continuous electrolysis over 300-hour. According to theoretical calculation and in-situ spectroscopy, the ortho-S configuration can provide ferromagnetic perturbation in carbon active centers, leading to the electron delocalization, which optimizes the OOH* adsorption during the catalytic process.

Water-Stable High-Entropy Metal-Organic Framework Nanosheets for Photocatalytic Hydrogen Production.

Metal-organic frameworks (MOFs) have emerged as promising platforms for photocatalytic hydrogen evolution reaction (HER) due to their fascinating physiochemical properties. Rationally engineering the compositions and structures of MOFs can provide abundant opportunities for their optimization. In recent years, high-entropy materials (HEMs) have demonstrated great potential in the energy and environment fields. However, there is still no report on the development of high-entropy MOFs (HE-MOFs) for photocatalytic HER in aqueous solution. Herein, the authors report the synthesis of a novel p-type HE-MOFs single crystal (HE-MOF-SC) and the corresponding HE-MOFs nanosheets (HE-MOF-NS) capable of realizing visible-light-driven photocatalytic HER. Both HE-MOF-SC and HE-MOF-NS exhibit higher photocatalytic HER activity than all the single-metal MOFs, which are supposed to be ascribed to the interplay between the different metal nodes in the HE-MOFs that enables more efficient charge transfer. Moreover, impressively, the HE-MOF-NS demonstrates much higher photocatalytic activity than the HE-MOF-SC due to its thin thickness and enhanced surface area. At optimum conditions, the rate of H2 evolution on the HE-MOF-NS is ≈13.24 mmol h-1 g-1, which is among the highest values reported for water-stable MOF photocatalysts. This work highlights the importance of developing advanced high-entropy materials toward enhanced photocatalysis.

Electrosynthesis of H2 O2 Promoted by π-π Interaction on a Metal-Free Carbon Catalyst.

The synthesis of hydrogen peroxide (H2 O2 ) through electrocatalytic oxygen reduction reaction is an ideal alternative to the current energy-intensive anthraquinone process, but developing cost-effective and high-efficiency electrocatalysts is still challenging. Herein, a metal-free graphitic carbon nitride/carbon nanotube (g-C3 N4 /CNT) hybrid catalyst can enhance H2 O2 production via π-π interaction is reported, achieving almost unity (97%) H2 O2 production at 0.57 V with high selectivity of over 92% across the wide potential range from 0.6 to 0 V. Other carbon materials with weak interaction with g-C3 N4 , such as acetylene black and super P, show markedly weakened H2 O2 production, indicating the importance of π-π interaction. Electron transfer kinetic analysis combined with density functional theory calculations indicates that the synergistic effect between g-C3 N4 and CNT enhances electron transfer and O2 activation between g-C3 N4 and CNT, leading to enhanced H2 O2 production performance. This work provides a complementary approach for H2 O2 production from oxygen reduction besides introducing oxygenated groups or heteroatom doping into carbon materials.

Recent Advances in Redox-Based Z-Scheme Overall Water Splitting under Visible Light Irradiation.

Photocatalytic overall water splitting (OWS) using suspended particulate photocatalysts to produce green hydrogen has inspired continuous interest due to its low cost for easy large-scale application. The two-step photoexcitation system (Z-scheme) mimicking natural photosynthesis was proposed to efficiently use visible light for realization of efficient conversion of solar irradiation. In this Perspective, we will introduce recent advances in redox-based Z-scheme OWS systems, including iodine-based, iron-based, metal complex-based, and other special ion redox couples. The advantages and challenges of each couple and the factors affecting the Z-scheme OWS efficiency are discussed in detail. Finally, the challenges and feasible solutions for the achievement of highly efficient Z-scheme OWS are then outlined. This Perspective provides guidance on how to construct a Z-scheme OWS system and enhance photocatalytic performance.

P-N Bonds-Mediated Atomic-Level Charge-Transfer Channel Fabricated between Violet Phosphorus and Carbon Nitride Favors Charge Separation and Water Splitting.

Heterostructures are widely employed in photocatalysis to promote charge separation and photocatalytic activity. However, their benefits are limited by the linkages and contact environment at the interface. Herein, violet phosphorus quantum dots (VPQDs) and graphitic carbon nitride (g-C3 N4 ) are employed as model materials to form VPQDs/g-C3 N4 heterostructures by a simple ultrasonic pulse excitation method. The heterostructure contains strong interfacial P-N bonds that mitigate interfacial charge-separation issues. P-P bond breakage occurs in the distinctive cage-like [P9] VPQD units during longitudinal disruption, thereby exposing numerous active P sites that bond with N atoms in g-C3 N4 under ultrasonic pulse excitation. The atomic-level interfacial P-N bonds of the Z-scheme VPQDs/g-C3 N4 heterostructure serve as photogenerated charge-transfer channels for improved electron-hole separation efficiency. This results in excellent photocatalytic performance with a hydrogen evolution rate of 7.70 mmol g-1  h-1 (over 9.2 and 8.5 times greater than those of pure g-C3 N4 and VPQDs, respectively) and apparent quantum yield of 11.68% at 400 nm. Using atomic-level chemical bonds to promote interfacial charge separation in phosphorene heterostructures is a feasible and effective design strategy for photocatalytic water-splitting materials.

Nanoreactor Confined and Enriched Intermediates for Electroreduction of CO2 to C2+ Products.

In the process of electroreduction of carbon dioxide (eCO2RR) to multi-carbon (C2+) products, it is imperative to enhance the concentration of key intermediate species on the catalyst surface. The utilization of micro-nano reactors to achieve confinement effects has been widely observed in various catalytic reactions, yet it has seldom been employed in eCO2RR. Here, we present a novel nanoreactor composed of stacked CuS nanosheets for eCO2RR to C2+ products. In comparison to catalyst comprising of nanosheet with open space, the C-C coupling within this confined nanospace is significantly enhanced, resulting in the increase of Faraday efficiency (FE) of C2+ products to 53 %. In situ infrared (IR) spectroscopy reveals the confinement and enrichment of key intermediate by the nanoreactor. Our research findings demonstrate that a meticulously designed nanoreactor can elevate the selectivity of C2+ products, thereby aiding in the design of eCO2RR catalysts.

Untangling the Effect of Carbonaceous Materials on the Photoelectrochemical Performance of BaTaO2N.

The water oxidation reaction is a rate-determining step in solar water splitting. The number of surviving photoexcited holes is one of the most influencing factors affecting the photoelectrochemical water oxidation efficiency of photocatalysts. The solar-to-hydrogen energy conversion efficiency of BaTaO2N is still far below the benchmark efficiency set for practical applications, notwithstanding its potential as a 600 nm-class photocatalyst in solar water splitting. To improve its efficiency in photoelectrochemical water splitting, this study offers a straightforward route to develop photocatalytic materials based on the combination of BaTaO2N and carbonaceous materials with different dimensions. The impact of diverse carbonaceous materials, such as fullerene, g-C3N4, graphene, carbon nanohorns, and carbon nanotubes, on the photoelectrochemical behavior of BaTaO2N has been examined. Notably, the use of graphene and g-C3N4 remarkably improves the photoelectrochemical performance of the composite photocatalysts through a higher photocurrent and acting as electron reservoirs. Consequently, a marked reduction in recombination rates, even at low overpotentials, leads to a higher accumulation of photoexcited holes, resulting in 2.6- and 1.7-fold increased BaTaO2N photocurrent densities using graphene and g-C3N4, respectively. The observed trends in the dark for the oxygen reduction reaction (ORR) potential align with the increase in the photocurrent density, revealing a good correlation between opposite phenomena. Importantly, the enhancement observed implies an underlying accumulation phenomenon. The verification of this concept lies in the evidence provided by oxygen reduction and is in line with photoredox flux matching during photocatalysis. This research underscores the intricate interplay between carbonaceous materials and oxynitride photocatalysts, offering a strategic approach to enhancing various photocatalytic capabilities.

Single Atom Iridium Decorated Nickel Alloys Supported on Segregated MoO2 for Alkaline Water Electrolysis.

Hetero-interface engineering has been widely employed to develop supported multicomponent catalysts for water electrolysis, but it still remains a substantial challenge for supported single atom alloys. Herein a conductive oxide MoO2 supported Ir1 Ni single atom alloys (Ir1 Ni@MoO2 SAAs) bifunctional electrocatalysts through surface segregation coupled with galvanic replacement reaction, where the Ir atoms are atomically anchored onto the surface of Ni nanoclusters via the Ir-Ni coordination accompanied with electron transfer from Ni to Ir is reported. Benefiting from the unique structure, the Ir1 Ni@MoO2 SAAs not only exhibit low overpotential of 48.6 mV at 10 mA cm-2 and Tafel slope of 19 mV dec-1 for hydrogen evolution reaction, but also show highly efficient alkaline water oxidation with overpotential of 280 mV at 10 mA cm-2 . Their overall water electrolysis exhibits a low cell voltage of 1.52 V at 10 mA cm-2 and excellent durability. Experiments and theoretical calculations reveal that the Ir-Ni interface effectively weakens hydrogen binding energy, and decoration of the Ir single atoms boost surface reconstruction of Ni species to enhance the coverage of intermediates (OH*) and switch the potential-determining step. It is suggested that this approach opens up a promising avenue to design efficient and durable precious metal bifunctional electrocatalysts.

Perovskite BaTaO2 N: From Materials Synthesis to Solar Water Splitting.

Barium tantalum oxynitride (BaTaO2 N), as a member of an emerging class of perovskite oxynitrides, is regarded as a promising inorganic material for solar water splitting because of its small band gap, visible light absorption, and suitable band edge potentials for overall water splitting in the absence of an external bias. However, BaTaO2 N still exhibits poor water-splitting performance that is susceptible to its synthetic history, surface states, recombination process, and instability. This review provides a comprehensive summary of previous progress, current advances, existing challenges, and future perspectives of BaTaO2 N for solar water splitting. A particular emphasis is given to highlighting the principles of photoelectrochemical (PEC) water splitting, classic and emerging photocatalysts for oxygen evolution reactions, and the crystal and electronic structures, dielectric, ferroelectric, and piezoelectric properties, synthesis routes, and thin-film fabrication of BaTaO2 N. Various strategies to achieve enhanced water-splitting performance of BaTaO2 N, such as reducing the surface and bulk defect density, engineering the crystal facets, tailoring the particle morphology, size, and porosity, cation doping, creating the solid solutions, forming the heterostructures and heterojunctions, designing the photoelectrochemical cells, and loading suitable cocatalysts are discussed. Also, the avenues for further investigation and the prospects of using BaTaO2 N in solar water splitting are presented.

Development of polyoxometalate-based Ag-H2biim inorganic-organic hybrid compounds functionalized for the acid electrocatalytic hydrogen evolution reaction.

The electrocatalytic hydrogen evolution reaction (HER) is an ideal method for hydrogen production. Transition metal complex electrocatalysts exhibit poor HER activity due to excessive or weak adsorption of H during the electrochemical reduction of water to molecular hydrogen in acidic environments. Developing specific functional complex materials as desired catalysts is challenging. Here, an electrochemical surface restructuring strategy of polyoxometalate (POM)-modified Ag materials toward the HER with a dramatically decreased overpotential under acidic aqueous conditions is established. We prepared two POM [SiW12O40]4- (SiW12)/[P2W18O62]6- (P2W18)-based Ag-2,2'-biimidazole (H2biim) inorganic-organic hybrid compounds (1 and 2) via the hydrothermal method and these two compounds undergo an electrochemical restructuring process in 0.5 M H2SO4 during the HER, in which Ag nanoparticles are in situ formed with the basic structures of SiW12 and P2W18 being maintained. The activated catalysts (1-AC-RDE and 2-AC-RDE) exhibit good electrocatalytic activity for the HER with good long-term stability, and the required overpotentials at a current density of 10 mA cm-2 are 112 mV (1-AC-RDE) and 91 mV (2-AC-RDE) with Tafel slopes of 77 mV dec-1 and 65 mV dec-1, respectively. The excellent electron-proton storage and transferability of SiW12 and P2W18 may provide a solution for the insufficient capture of H by Ag, leading to an effective self-optimizing behavior and superior acidic HER activity.

Insight into the Key Restriction of BiVO4 Photoanodes Prepared by Pyrolysis Method for Scalable Preparation.

Bismuth Vanadate (BiVO4 ) photoanode has been popularly investigated for promising solar water oxidation, but its intrinsic performance has been greatly retarded by the direct pyrolysis method. Here we insight the key restriction of BiVO4 prepared by metal-organic decomposition (MOD) method. It is found that the evaporation of vanadium during the pyrolysis tends to cause a substantial phase impurity, and the unexpected few tetragonal phase inhibits the charge separation evidently. Consequently, suitably excessive vanadium precursor was adopted to eliminate the phase impurity, based on which the obtained intrinsic BiVO4 photoanode could exhibit photocurrent density of 4.2 mA cm-2 at 1.23 VRHE under AM 1.5 G irradiation, as comparable to the one fabricated by the currently popular two-step electrodeposition method. Furthermore, the excellent performance can be maintained on the enlarged photoanode (25 cm2 ), demonstrating the advantage of MOD method in scalable preparation. Our work provides new insight and highlights the glorious future of MOD method for the design of scale-up efficient BiVO4 photoanode.

A randomized non-inferiority trial of therapeutic strategy with immunosuppressants versus biologics for Vogt-Koyanagi-Harada disease.

Biologics are increasingly used to treat Vogt-Koyanagi-Harada disease, but head-to-head comparisons with conventional immunosuppressants are lacking. Here in this randomized trial (Chinese Clinical Trial Registry, ChiCTR2100043061), we assigned 110 patients (27 early-phase and 83 late-phase) to cyclosporine-based immunosuppressant strategy (N = 56) or adalimumab-based biologic strategy (N = 54), each combined with a modified corticosteroid regimen. The primary outcome is change from baseline in best-corrected visual acuity at week 26. The margin of non-inferiority for cyclosporine is -7 letters. The primary outcome is 11.2 letters (95% CI, 7.5 to 14.9) in the cyclosporine group and 6.3 letters (95% CI, 3.1 to 9.6) in the adalimumab group (difference, 4.9; 95% CI, 0.2 to 9.5; P < 0.001 for non-inferiority). The between-group difference is -0.8 letters (95% CI, -6.1 to 4.5) in early-phase disease and 5.7 letters (95% CI, 0.2 to 11.2) in late-phase. Serious adverse events are reported less frequently in the cyclosporine group than in the adalimumab group (0.70 vs. 1.21 events per patient-year). Here, we report that combined with a non-standard corticosteroid regimen, cyclosporine-based immunosuppressant strategy is non-inferior to adalimumab-based biologic strategy by 26 weeks for visual improvement in a cohort of patients with Vogt-Koyanagi-Harada disease, 75% of whom have a late-phase disease.

Confirming High-Valent Iron as Highly Active Species of Water Oxidation on the Fe, V-Coupled Bimetallic Electrocatalyst: In Situ Analysis of X-ray Absorption and Mössbauer Spectroscopy.

Iron (Fe)-based bimetallic oxides/hydroxides have been widely investigated for promising alkaline electrochemical oxygen evolution reactions (OERs), but it still remains argumentative whether Fe3+ or Fe4+ intermediates are highly active for efficient OER. Here, we rationally designed and prepared one Fe, V-based bimetallic composite nanosheet by employing the OER-inert V element as a promoter to completely avoid the argument of real active metals and using our recently developed one-dimensional conductive nickel phosphide (NP) as a support. The as-obtained hierarchical nanocomposite (denoted as FeVOx/NP) was evaluated as a model catalyst to gain insight into the iron-based species as highly active OER sites by performing in situ X-ray absorption spectroscopy and 57Fe Mössbauer spectroscopy measurements. It was found that the high-valent Fe4+ species can only be detected during the OER process of the FeVOx/NP nanocomposite instead of the iron counterpart itself. Together with the fact that the OER activities of both the vanadium and iron counterparts are by far worse than that of the FeVOx/NP composite, we can confirm that the high-valent Fe4+ formed are the highly active species for efficient OER. As demonstrated by density functional theory simulations, the composite of Fe and V metals is proposed to cause a decreased Gibbs free energy as well as theoretical overpotential of water oxidation with respect to its counterparts, as is responsible for its excellent OER performance with extremely low OER overpotential (290 mV at 500 mA cm-2) and extraordinary stability (1000 h at 100 mA cm-2).

Single Atom Bi Decorated Copper Alloy Enables C-C Coupling for Electrocatalytic Reduction of CO2 into C2+ Products.

Single atom alloy (SAA) catalysts have been recently explored for promotion of various heterogeneous catalysis, but it remains unexplored for selective electrocatalytic reduction of carbon dioxide (CO2 ) into multi-carbon (C2+ ) products involving C-C coupling. Herein we report a single-atomic Bi decorated Cu alloy (denoted as BiCu-SAA) electrocatalyst that could effectively modulate selectivity of CO2 reduction into C2+ products instead of previous C1 ones. The BiCu-SAA catalyst exhibits remarkably superior selectivity of C2+ products with optimal Faradaic efficiency (FE) of 73.4 % compared to the pure copper nanoparticle or Bi nanoparticles-decorated Cu nanocomposites, and its structure and performance can be well maintained at current density of 400 mA cm-2 under the flow cell system. Based on our in situ characterizations and density functional theory calculations, the BiCu-SAA is found to favor the activation of CO2 and subsequent C-C coupling during the electrocatalytic reaction, as should be responsible for its extraordinary C2+ selectivity.

Metallic Powder Promotes Nitridation Kinetics for Facile Synthesis of (Oxy)Nitride Photocatalysts.

Nitrogen-containing semiconductors (including metal nitrides, metal oxynitrides, and nitrogen-doped metal oxides) have been widely researched for their application in energy conversion and environmental purification because of their unique characteristics; however, their synthesis generally encounters significant challenges owing to sluggish nitridation kinetics. Herein, a metallic-powder-assisted nitridation method is developed that effectively promotes the kinetics of nitrogen insertion into oxide precursors and exhibits good generality. By employing metallic powders with low work functions as electronic modulators, a series of oxynitrides (i.e., LnTaON2 (Ln = La, Pr, Nd, Sm, and Gd), Zr2 ON2 , and LaTiO2 N) can be prepared at lower nitridation temperatures and shorter nitridation periods to obtain comparable or even lower defect concentrations compared to those of the conventional thermal nitridation method, leading to superior photocatalytic performance. Moreover, some novel nitrogen-doped oxides (i.e., SrTiO3- x Ny and Y2 Zr2 O7- x Ny ) with visible-light responses can be exploited. As revealed by density functional theory (DFT) calculations, the nitridation kinetics are enhanced via the effective electron transfer from the metallic powder to the oxide precursors, reducing the activation energy of nitrogen insertion. The modified nitridation route developed in this work is an alternative method for preparing (oxy)nitride-based materials for energy/environment-related heterogeneous catalysis.

Transport of neonicotinoid insecticides in a wetland ecosystem: Has the cultivation of different crops become the major sources?

Extensive application of neonicotinoid insecticides (NNIs) in agricultural production has resulted in widespread contamination of multiple environmental media. To investigate the occurrence and fate of NNIs in the largest marsh distribution area in Northeast China, an integrated ecosystem covering farmlands, rivers, and marshes, referred to as the farmland-river-marsh continuum in this study, was chosen for soil, water, and sediment sampling. Five NNIs were detected, with imidacloprid (IMI), thiamethoxam (THM), and clothianidin (CLO) being the most frequently detected ones in different samples. Concentrations of target NNIs in soil, surface water, and sediment samples were 2.23-136 ng/g dry weight (dw), 3.20-51.7 ng/L, and 1.53-8.40 ng/g dw, respectively. In soils, NNIs were detected more often and at higher concentrations in upland fields, while the concentration of NNIs in the soybean-growing soils (71.5 ng/g dw) was significantly higher than in the rice-growing soils (18.5 ng/g dw) (p < 0.05). Total concentration of NNIs in surface water was lower in the Qixing River channel than inside the marsh, while that in sediments showed an opposite trend. Total migration mass of IMI from approximately 157,000 ha of farmland soil by surface runoff was estimated to be 2636-3402 kg from the application time to the sampling period. The storage of NNIs in sediments was estimated to range from 45.9 to 252 ng/cm2. The estimated environmental risks, calculated as the risk quotients (RQs), revealed low risks to aquatic organisms (RQs <0.1) from the residual concentrations of NNIs in water.