Co/C Nanocomposites with Tunable Condensed States Induced by Conformation-Mediated Strategy for Electromagnetic Wave Absorption.

The strategic regulation of condensed state structures in multicomponent nanomaterials has emerged as an effective approach for achieving controllable electromagnetic (EM) properties. Herein, a novel conformation-mediated strategy is proposed to manipulate the condensed states of Co and C, as well as their interaction. The conformation of polyvinylpyrrolidone molecules is adjusted using a gradient methanol/water ratio, whereby the coordination dynamic equilibrium effectively governs the deposition of metal-organic framework precursors. This process ultimately influences the combined impact of derived Co and C in the resulting Co/C nanocomposites post-pyrolysis. The experimental results show that the condensed state structure of Co/C nanocomposites transitions from agglomerate state → to biphasic compact state → to loose packing state. Benefiting from the tunable collaboration between interfacial polarization and defects polarization, and the appropriate electrical conductivity, the diphasic compact state of Co/C nanocomposites achieves an effective absorbing bandwidth of 7.12 GHz (2.1 mm) and minimum reflection loss of -32.8 dB. This study highlights the significance of condensed state manipulation in comprehensively regulating the EM wave absorption characteristics of carbon-based magnetic metal nanocomposites, encompassing factors such as conductivity loss, magnetic loss, defect polarization, and interface polarization.

Investigation of the solid-liquid ternary phase diagrams of 2HNIW·HMX cocrystal.

The influence of temperature and solvent on the solid-liquid ternary phase diagrams of the 2HNIW·HMX cocrystal has been investigated. Ternary phase diagrams were constructed for the 2HNIW·HMX cocrystal in acetonitrile and ethyl acetate at 15 °C and 25 °C. HMX and HNIW showed inconsistent dissolution behavior and congruent dissolution behavior in acetonitrile and ethyl acetate, respectively. In the HMX-HNIW-acetonitrile system, the 2HNIW·HMX cocrystal has a narrow thermodynamically stable region at both temperatures. The cocrystal exhibits a wider thermodynamically stable region in the HMX-HNIW-ethyl acetate system. The results show that the choice of solvent has a crucial influence on the dissolution behavior of the cocrystal and the size and position of each region in the phase diagram, while the temperature has no apparent effect on the overall appearance of the phase diagram. By properly selecting the ratios, the 2HNIW·HMX cocrystal could be prepared by the isothermal slurry conversion crystallization method.

Recent Advances in Synthesis and Properties of Nitrated-Pyrazoles Based Energetic Compounds.

Nitrated-pyrazole-based energetic compounds have attracted wide publicity in the field of energetic materials (EMs) due to their high heat of formation, high density, tailored thermal stability, and detonation performance. Many nitrated-pyrazole-based energetic compounds have been developed to meet the increasing demands of high power, low sensitivity, and eco-friendly environment, and they have good applications in explosives, propellants, and pyrotechnics. Continuous and growing efforts have been committed to promote the rapid development of nitrated-pyrazole-based EMs in the last decade, especially through large amounts of Chinese research. Some of the ultimate aims of nitrated-pyrazole-based materials are to develop potential candidates of castable explosives, explore novel insensitive high energy materials, search for low cost synthesis strategies, high efficiency, and green environmental protection, and further widen the applications of EMs. This review article aims to present the recent processes in the synthesis and physical and explosive performances of the nitrated-pyrazole-based Ems, including monopyrazoles with nitro, bispyrazoles with nitro, nitropyrazolo[4,3-c]pyrazoles, and their derivatives, and to comb the development trend of these compounds. This review intends to prompt fresh concepts for designing prominent high-performance nitropyrazole-based EMs.

Comparative studies on structure, sensitivity and mechanical properties of CL-20/DNDAP cocrystal and composite by molecular dynamics simulation.

Molecular dynamics simulation was performed on 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20), 2,4-dinitro-2,4-diazapentane (DNDAP), and CL-20/DNDAP cocrystal and composite under COMPASS force field at different temperatures. The binding energy (E bind), radial distribution function (RDF), trigger bond length, cohesive energy density (CED) and mechanical properties were studied and compared. The results show that the binding energy of the cocrystal is evidently higher than that of the composite at the same temperature. RDF analysis reveals that hydrogen bonds and vdW forces between CL-20 and DNDAP exist in both CL-20/DNDAP cocrystal and composite, and the interactions in the cocrystal are stronger than those in the composite. The maximum trigger bond length decreases in the order ε-CL-20 > CL-20/DNDAP composite > CL-20/DNDAP cocrystal. Moreover, the rigidity and stiffness of the cocrystal and composite decrease compared to that of CL-20, while the ductility and elasticity are better than that of the two pure components. These results demonstrate that CL-20/DNDAP cocrystal might be very promising in explosive applications.

Nonisothermal decomposition and safety parameters of HNIW/TNT cocrystal.

To explore the thermal decomposition behavior and evaluate the thermal safety of the cocrystal 2,4,6,8,10,12-hexanitrohexaazaisowurtzitane (HNIW)/2,4,6-trinitrotoluene (TNT), its thermal and kinetic behaviors were studied by differential scanning calorimetry (DSC) technique. With the help of onset temperature (T e) and maximum peak temperature (T p) from the non-isothermal DSC curves of HNIW/TNT cocrystal at different heating rates (ß), the following were calculated: the value of specific heat capacity (C p) and the standard molar enthalpy of formation , the apparent activation energy (E K and E O) and pre-exponential constant (A K) of thermal decomposition reaction obtained by Kissinger's method and Ozawa's method, density (ρ) and thermal conductivity (λ), the decomposition heat (Q d, as half-explosion heat), Zhang-Hu-Xie-Li's formula, Smith's equation, Friedman's formula, Bruckman-Guillet's formula, Frank-Kamenetskii's formula and Wang-Du's formulas, the values (T e0 and T p0) of T e and T p corresponding to ß â†’ 0, thermal explosion temperature (T be and T bp), adiabatic time-to-explosion (t tiad), 50% drop height (H 50) for impact sensitivity, critical temperature of hot-spot initiation (T cr), thermal sensitivity probability density function [S(T)] vs. temperature (T) relation curves with radius of 1 m and ambient temperature of 300 K, the peak temperature corresponding to the maximum value of S(T) vs. T relation curve (T S(T)max), safety degree (SD) and critical ambient temperature (T acr) of thermal explosion. Results show that the kinetic equation describing the exothermic decomposition reaction of HNIW/TNT cocrystal is The following thermal safety parameters for the HNIW/TNT cocrystal are obtained: T e0 = 464.45 K; T p0 = 477.55 K; T be = 472.82 K; T bp = 485.89 K; t tiad = 4.40 s, 4.42 s, and 4.43 s for n = 0, 1, and 2, respectively; T cr = 531.90 K; H 50 = 19.46 cm; and the values of T acr, T S(T)max, SD and P TE are 469.69 K, 470.58 K, 78.57% and 21.43% for sphere; 465.70 K, 470.58 K, 78.17% and 21.83% for infinite cylinder; and 459.39 K, 464.26 K, 77.54% and 22.46% for infinite flat.

Non-isothermal decomposition kinetics, heat capacity and thermal safety of 37.2/44/16/2.2/0.2/0.4-GAP/CL-20/Al/N-100/PCA/auxiliaries mixture.

The specific heat capacity (C(p)) of 37.2/44/16/2.2/0.2/0.4-GAP/CL-20/Al/N-100/PCA/auxiliaries mixture was determined with the continuous C(p) mode of microcalorimeter. The equation of C(p) with temperature was obtained. The standard molar heat capacity of GAP/CL-20/Al/N-100/PCA/auxiliaries mixture was 1.225 J mol(-1)K(-1) at 298.15K. With the help of the peak temperature (T(p)) from the non-isothermal DTG curves of the mixture at different heating rates (ß), the apparent activation energy (E(k) and E(o)) and pre-exponential constant (A(K)) of thermal decomposition reaction obtained by Kissinger's method and Ozawa's method. Using density (ρ) and thermal conductivity (λ), the decomposition heat (Q(d), taking half-explosion heat), Zhang-Hu-Xie-Li's formula, the values (T(e0) and T(p0)) of T(e) and T(p) corresponding to ß â†’ 0, thermal explosion temperature (T(be) and T(bp)), adiabatic time-to-explosion (t(TIad)), 50% drop height (H(50)) of impact sensitivity, and critical temperature of hot-spot initiation (T(cr,hot spot)) of thermal explosion of the mixture were calculated. The following results of evaluating the thermal safety of the mixture were obtained: T(be) = 441.64K, T(bp) = 461.66 K, t(Tlad) = 78.0 s (n = 2), t(Tlad) = 74.87 s (n = 1), t(Tlad) = 71.85 s (n = 0), H(50) = 21.33 cm.

Non-isothermal thermal decomposition reaction kinetics of 2-nitroimino-5-nitro-hexahydro-1,3,5-triazine (NNHT).

The thermal behavior and decomposition reaction kinetics of 2-nitroimino-5-nitro-hexahydro-1,3,5-triazine (NNHT) were investigated by TG-DTG and DSC under atmospheric pressure and flowing nitrogen gas conditions. The results show that the thermal decomposition process of NNHT has two mass loss stages. The exothermic decomposition reaction mechanism obeys chemical reaction rule. The kinetic parameters of the reaction are E(a)=131.77 kJ mol(-1), lg(A/s(-1))=12.56, respectively. The kinetic equation can be expressed as: dalpha/dt = 10(12.86)(1-alpha)(3/2)3(-1.5849 x 10(4)/T)). The critical temperature of thermal explosion of NNHT obtained from the peak temperature (T(p)) is T(bp)=467.22K. The entropy of activation (DeltaS( not equal)), enthalpy of activation (DeltaH( not equal)), and free energy of activation (DeltaG( not equal)) of the reaction are -7.978 J mol(-1)K(-1), 127.99 kJ mol(-1) and 131.62 kJ mol(-1), respectively.