A Three-in-One Hybrid Strategy for High-Performance Semiconducting Polymers Processed from Anisole.

The development of semiconducting polymers with good processability in green solvents and competitive electrical performance is essential for realizing sustainable large-scale manufacturing and commercialization of organic electronics. A major obstacle is the processability-performance dichotomy that is dictated by the lack of ideal building blocks with balanced polarity, solubility, electronic structures, and molecular conformation. Herein, through the integration of donor, quinoid and acceptor units, an unprecedented building block, namely TQBT, is introduced for constructing a serial of conjugated polymers. The TQBT, distinct in non-symmetric structure and high dipole moment, imparts enhanced solubility in anisole-a green solvent-to the polymer TQBT-T. Furthermore, PTQBT-T possess a highly rigid and planar backbone owing to the nearly coplanar geometry and quinoidal nature of TQBT, resulting in strong aggregation in solution and localized aggregates in film. Remarkably, PTQBT-T films spuncast from anisole exhibit a hole mobility of 2.30 cm2 V-1 s-1, which is record high for green solvent-processable semiconducting polymers via spin-coating, together with commendable operational and storage stability. The hybrid building block emerges as a pioneering electroactive unit, shedding light on future design strategies in high-performance semiconducting polymers compatible with green processing and marking a significant stride towards ecofriendly organic electronics.

Syntheses of Tetracyclic Indoline Derivatives Via Gold(I)-Catalyzed Hydroamination/Cycloisomerization Cascade of 2-Ethynyltryptamides.

A gold(I)-catalyzed hydroamination/cycloisomerization cascade reaction was developed to yield indolizino[8,7-b]indole and indolo[2,3-a]-quinolizine derivatives from 2-ethynyltryptamides. The optimal conditions were determined by condition screening, and the functional group tolerances of these reactions were explored based on synthetic substrates. An insight into the explanation on the selectivity of the ring closure was obtained by density functional theory calculations. A plausible mechanism for the cascade reactions was proposed. Derivatization of the indolizino[8,7-b]indole and total synthesis of nauclefidine demonstrated the practicality of this strategy.

Polymer Donor with a Simple Skeleton and Minor Siloxane Decoration Enables 19% Efficiency of Organic Solar Cells.

Development of polymer donors with simple chemical structure and low cost is of great importance for commercial application of organic solar cells (OSCs). Here, side-chain random copolymer PMQ-Si605 with a simply 6,7-difluoro-3-methylquinoxaline-thiophene backbone and 5% siloxane decoration of side chain is synthesized in comparison with its alternating copolymer PTQ11. Relative to molecular weight (Mn) of 28.3 kg mol-1 for PTQ11, the random copolymer PMQ-Si605 with minor siloxane decoration is beneficial for achieving higher Mn up to 51.1 kg mol-1. In addition, PMQ-Si605 can show stronger aggregation ability and faster charge mobility as well as more efficient exciton dissociation in active layer as revealed by femtosecond transient absorption spectroscopy. With L8-BO-F as acceptor, its PMQ-Si605 based OSCs display power conversion efficiency (PCE) of 18.08%, much higher than 16.21% for PTQ11 based devices. With another acceptor BTP-H2 to optimize the photovoltaic performance of PMQ-Si605, further elevated PCEs of 18.50% and 19.15% can be achieved with the binary and ternary OSCs, respectively. Furthermore, PMQ-Si605 based active layers are suitable for processing in high humidity air, an important factor for massive production of OSCs. Therefore, the siloxane decoration on polymer donors is promising, affording PMQ-Si605 as a high-performing and low cost candidate.

A skeletal randomization strategy for high-performance quinoidal-aromatic polymers.

Enhancing the solution-processability of conjugated polymers (CPs) without diminishing their thin-film crystallinity is crucial for optimizing charge transport in organic field-effect transistors (OFETs). However, this presents a classic "Goldilocks zone" dilemma, as conventional solubility-tuning methods for CPs typically yield an inverse correlation between solubility and crystallinity. To address this fundamental issue, a straightforward skeletal randomization strategy is implemented to construct a quinoid-donor conjugated polymer, PA4T-Ra, that contains para-azaquinodimethane (p-AQM) and oligothiophenes as repeat units. A systematic study is conducted to contrast its properties against polymer homologues constructed following conventional solubility-tuning strategies. An unusually concurrent improvement of solubility and crystallinity is realized in the random polymer PA4T-Ra, which shows moderate polymer chain aggregation, the highest crystallinity and the least lattice disorder. Consequently, PA4T-Ra-based OFETs, fabricated under ambient air conditions, deliver an excellent hole mobility of 3.11 cm2 V-1 s-1, which is about 30 times higher than that of the other homologues and ranks among the highest for quinoidal CPs. These findings debunk the prevalent assumption that a random polymer backbone sequence results in decreased crystallinity. The considerable advantages of the skeletal randomization strategy illuminate new possibilities for the control of polymer aggregation and future design of high-performance CPs, potentially accelerating the development and commercialization of organic electronics.

The effects of oral nutritional supplements interventions on nutritional status in patients undergoing colorectal cancer surgery: A systematic review.

BACKGROUND: The high incidence of malnutrition in patients undergoing colorectal cancer surgery can lead to unplanned weight loss, sarcopenia and reduced grip strength to the extent that it can seriously affect the prognosis of colorectal cancer patients. OBJECTIVE: This study investigated the effect of oral nutritional supplements (ONS) on the prevalence of grip strength, unplanned weight loss and sarcopenia in patients undergoing colorectal cancer surgery. METHODS: We systematically searched randomized controlled studies from CINAHL, PubMed, Embase, Cochrane and Web of Science and three Chinese databases (CNKI, Wan-Fang database, VIP database) from database creation to September 2023. The risk of bias in individual studies was assessed using the Cochrane Collaboration tool, and the certainty of evidence was assessed using the five GRADE criteria. Statistical analysis was performed using the RevMan 5.3 software, and information that could not be meta-analysed was reviewed in the form of a literature summary. RESULTS: Eleven papers met the inclusion criteria with a combined sample size of 1070 cases, including 532 cases in the trial group and 538 cases in the control group. Four papers reported the effect of ONS on grip strength and included very low-quality evidence supporting no effect of ONS on grip strength. Ten studies reported the effect of ONS on body weight and body mass index (BMI) and included very low-quality evidence supporting a positive ONS on weight and BMI changes. Meta-analysis showed a significant reduction in weight loss (12-15 weeks) and BMI loss (12-15 weeks) in patients with colorectal cancer in the ONS group. The effect of ONS on the prevalence of sarcopenia after hospital discharge was reported in two studies, and meta-analysis showed a significant reduction in the prevalence of postoperative sarcopenia in colorectal cancer patients in the ONS group, but the quality of evidence was low. CONCLUSIONS: This study showed that the use of ONS in patients undergoing surgery for colorectal cancer improved patient weight loss and BMI reduction and reduced the prevalence of postoperative sarcopenia but did not improve patient grip strength. The quality of evidence for inclusion in the article was low or very low, and further studies are needed to provide better evidence.

Genome-wide association study (GWAS) analysis of black color trait in the leopard coral grouper (Plectropomus leopardus) using whole genome resequencing.

The leopard coral grouper (Plectropomus leopardus) is a coral reef fish species that exhibits rapid and diverse color variation. However, the presence of melanoma and the high proportion of individuals displaying black color in artificial breeding have led to reduced economic and ornamental value. To pinpoint single nucleotide polymorphisms (SNPs) and potential genes linked to the black pigmentation characteristic in this particular species, This study gathered a cohort of 360 specimens from diverse origins and conducted a comprehensive genome-wide association analysis (GWAS) employing whole-genome resequencing. As a result, 57 SNPs related to the black skin trait were identified, and a grand total of 158 genes were annotated within 50 kb of these SNPs. Subsequently, GWAS was applied to three populations (LED, QHH, and QHL), and the corresponding results were compared with the analysis results of the total population. The results of the four GWAS models showed significant enrichment in Rap1 signaling pathway, melanin biosynthesis, metabolic pathways, tyrosine metabolism, cAMP signaling pathway, AMPK signaling pathway, PI3K-Akt signaling pathway, EGFR tyrosine kinase inhibitor resistance, HIF-1 signaling pathway, Ras signaling pathway, MAPK signaling pathway, etc. (p < 0.05), which were mainly associated with eleven genes (POL4, MET, E2F2, COMT, ZBED1, TYRP2, FOXP2, THIKA, LORF2, MYH16 and SOX2). Significant differences (p < 0.05) were observed in the expression of all 11 genes in the dorsal skin tissue, in 10 genes except COMT in the ventral skin tissue, and in all 11 genes in the caudal fin tissue. These findings imply that the control of body color in the P. leopardus is the result of the joint action of multiple genes and signaling pathways. These findings will contribute to a more profound comprehension of the genetic attributes that underlie the development of black skin in the vibrant P. leopardus, thus furnishing a theoretical foundation for genetic enhancement.

Gold(I)-Catalyzed Substitution-Controlled Syntheses of Spiro[indoline-3,3'-pyrrolidine] and Spiro[indoline-3,3'-piperidine] Derivatives.

Spiro[indoline-3,3'-pyrrolidine] and spiro[indoline-3,3'-piperidine] derivatives were synthesized in a substitution-controlled manner under the catalysis of cationic gold(I) species in the presence of Hantzsch ester (HEH). The optimal reaction condition was determined by screening, and the functional group tolerances of these two pathways were examined by readily synthetic substrates. The endo and exo selectivities of these cyclizations were elucidated by density functional theory calculations, and a plausible mechanism for these transformations was proposed.

Short-Wavelength Infrared Organic Light-Emitting Diodes from A-D-A'-D-A Type Small Molecules with Emission beyond 1100 nm.

Short-wavelength infrared (SWIR) organic light-emitting diodes (OLEDs) have attracted great interest due to their potential applications in biological imaging, infrared lighting, optical communication, environmental monitoring, and surveillance. Due to an intrinsic limitation posed by the energy-gap law, achieving high-brightness in SWIR OLEDs remains a challenge. Herein, the study reports the use of novel A-D-A'-D-A type small molecules NTQ and BTQ for high-performance SWIR OLEDs. Benefiting from multiple D-A effect in conjugated skeleton, the small molecules NTQ and BTQ exhibit narrow optical gaps of 1.23 and 1.13 eV, respectively. SWIR electroluminescence (EL) emission from OLEDs based on NTQ and BTQ is achieved, with emission peaks at 1140 and 1175 nm, respectively. Not only owing to a negligible efficiency roll-off across the full range of applied current density but also the ability to afford a high operation current density of 5200 mA cm-2 , the resultant SWIR OLEDs based on NTQ exhibit a maximal radiant exitance of =1.12 mW cm-2 . Furthermore, the NTQ-based OLEDs also possess sub-gap turn-on voltage of 0.85 V, which is close to the physical limits derived from the generalized Kirchhoff and Planck equation. This work demonstrates that A-D-A'-D-A type small molecules offer significant promise for NIR/SWIR emitting material innovations.

Collective Syntheses of 8-Oxoprotoberberines via Sequential In(OTf)3-Catalyzed Cyclization and Pd(OAc)2-Catalyzed Heck Coupling.

Six 8-oxoprotoberberines were synthesized collectively in four steps with acceptable yields (14-19%), of which the products 8-oxopalmatine, 8-oxopseudopalmatine, 8-oxoberberine, and 8-oxopseudoberberine come from nature. The synthetic route was featured with the In(OTf)3-catalyzed cyclization and Heck coupling. Moreover, the syntheses of the natural products berberine, canadine, and iambertine were achieved via various reductions from 8-oxoberberine, which provided a concise approach to the syntheses of this kind of alkaloids.

Quantum Mechanical Prediction and Experimental Verification of Au(I)-Catalyzed Substitution-Controlled Syntheses of 1H-Pyrido[4,3-b]indole and Spiro[indoline-3,3'-pyridine] Derivatives.

Density functional theory calculations were applied to predict the pathways of gold(I)-catalyzed cycloisomerization of the indole substrates with 1,6-enynes, which were consistent with the ensuing experimental results. The substitution-controlled synthesis led to the formation of 1H-pyrido[4,3-b]indole and spiro[indoline-3,3'-pyridine] derivatives in a tunable way. The reactions had good functional group tolerances, and a possible mechanism was proposed based on the computational and experimental results.

Numerical Simulation of the Combustion Characteristics in a Flue Gas Internal Recirculation Burner.

The combustion characteristics and NOx emissions of a newly designed flue gas internal recirculation low-NOx burner (FIR) were studied. In the study, experimental and numerical simulations of the FIR low-NOx burner were conducted under natural inlet air conditions at three different powers. Results show that the fuel inlet strongly influences the jet effect, thus influencing the flue gas recirculation rate, flame stability, and NOx emissions. With a medium power of 20 kW, the NOx emission of a FIR low-NOx burner is lower than 30 mg/N m3. Higher or lower power will increase the NOx emissions or induce combustion instability. The swirling flow and bluff body structure can effectively improve the combustion stability. Three dominant frequencies of 54, 264, and 448 Hz can be observed from the power spectral densities of axial velocity, corresponding to the shedding vortex in the shear layer, the swirl frequency of processing vortex core (PVC), and the vortex induced by the PVC structure, respectively. The influences of vortex shedding and PVC structure are weak and inadequate to affect the overall flame stability.

Three Isomeric Non-Fullerene Acceptors Comprising a Mono-Brominated End-Group for Efficient Organic Solar Cells.

Non-fullerene acceptors (NFAs) carrying a 1,1-dicyanomethylene-3-indanone (IC) end-group are the most powerful ones to boost the power conversion efficiency of organic solar cells (OSCs). However, the well-known Knoevenagel condensation of the mono-halogenated IC end-group will result in an NFA isomeric effect, a chemical issue that needs to be addressed. Herein, facile preparations and separations of three well-defined mono-brominated isomers BTzIC-2Br-δ, BTzIC-2Br-γ, and BTzIC-2Br-δγ via column chromatography with a well-chosen mixing solvent were demonstrated for Knoevenagel condensation, and their structures were verified by NMR spectra and matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF) mass spectra. It is the first time that an asymmetric isomer BTzIC-2Br-δγ is reported, and the regioisomeric effect on optoelectronic properties can be investigated based on all three isomers. Moreover, the single-crystal structure was successfully achieved for the symmetric molecule BTzIC-2Br-γ. With benzodithiophene (BDT)-free PFBT4T-T20 as an easily accessible and low-cost polymer donor, the three isomers could show differentiated device performances, with a power conversion efficiency order of BTzIC-2Br-γ (16.00%) > BTzIC-2Br-δγ (15.81%) > BTzIC-2Br-δ (15.29%). The best efficiency of 16.00% achieved with BTzIC-2Br-γ is among the highest ones for binary OSCs based on the low-cost BDT-free donors. The facile and complete synthesis of isomeric NFAs with mono-halogenated IC end-groups would promote the elucidation of the structure-property relationship.

Fine-Tuning of Siloxane Pendant Distance for Achieving Highly Efficient Eco-Friendly Nonfullerene Solar Cells.

Side-chain engineering has been proved to show profound impact on polymer properties and blend morphology. Herein, the critical role of siloxane-terminated alkoxy side chains was revealed by a tiny decorating method through which the molar content of siloxane-terminated alkoxy side chain was fixed to 5 %, and its alkyl linker was the only tuning factor. The pentylene, heptylene, and nonylene linkers were designed and used to synthesize wide-bandgap polymers PQSi505, PQSi705, and PQSi905, respectively. Interestingly, the siloxane pendant of combinatory side chain exhibited a distinct impact on molecular packing when its branching position shifted slightly. Among the three polymers, PQSi705 had the strongest aggregation and the highest packing order. Finally, toluene-processed organic solar cells (OSCs) based on PQSi705 and Y6-BO achieved the best power conversion efficiency of 15.77 %. This work suggests that siloxane pendant can serve as a powerful modulator to enhance the photovoltaic performance of OSCs.

Using 3.0 eV Large Bandgap Conjugated Polymer as Host Donor to Construct Ternary Semi-Transparent Polymer Solar Cells: Increased Average Visible Transmittance and Modified Color Temperature.

Although optical engineering strategy has been utilized to optimize average visible transmittance (AVT) of semi-transparent organic solar cells (ST-OSCs), judicious selection of active layer materials should be more direct and basic. Herein, an efficient ternary active layer is constructed with a wide bandgap (3.0 eV) fluorescent polymer FC-S1 as host donor, a middle bandgap polymer PM6 as guest donor, and a narrow bandgap non-fullerene Y6-BO as acceptor. Using FC-S1 as the host donor can allow more visible photons to penetrate the device. In the absence of optical engineering, the ternary ST-OSC with FC-S1:PM6:Y6-BO = 1:0.3:1.5 active layer of 30 nm thickness displays a much higher AVT of 49.28% than that of 32.34% for a PM6:Y6-BO = 1.3:1.5 based binary ST-OSC. The ternary ST-OSC provides a good power conversion efficiency of 6.01%, only slightly lower than 7.15% for the binary ST-OSC. The ternary ST-OSC also demonstrates a color rendering index (CRI) of 87 and a correlated color temperature (CCT) of 6916 K, all better than CRI of 80 and CCT of 9022 K for the binary ST-OSC. Moreover, the backbone of FC-S1 is mainly composed by fluorene and carbazole, two easily-accessible aromatic rings, which would meet low-cost concern of ST-OSCs.

Amniotic epithelial cells accelerate diabetic wound healing by protecting keratinocytes and fibroblasts from high-glucose-induced senescence.

Human amniotic epithelial cells (hAECs), one of the stem cells identified from the human placenta, possess numerous advantages and have been considered as an attractive and available cell source for regenerative medicine. Accumulating evidence has showed that cellular senescence was one of the pathogenic hubs of diabetic wound chronicity. Keratinocytes and fibroblasts are the primary cells involved in wound healing. Therefore, in this study, we aimed to investigate the anti-senescence effects of hAECs on keratinocytes and fibroblasts in diabetic wounds. Sustained hyperglycemia impaired cell function and accelerated senescence in vitro. However, this phenotype was rescued by hAECs-conditioned medium (hAECs-CM), with increased migration and proliferation in keratinocytes and fibroblasts and enhanced collagen synthesis and α-smooth muscle actin (α-SMA) production in fibroblasts. In addition, hAECs-CM dramatically inhibited intracellular reactive oxygen species (ROS) and senescence-associated ß-galactosidase (SA-ß-gal) in keratinocytes and fibroblasts under high-glucose (HG) condition. Moreover, hAECs-CM could downregulate the increased RAGE and P21 induced by continuous HG stimulation. Intradermal injection of hAECs in diabetic wounds promoted re-epithelialization and granulation tissue formation, accompanied by decreased P21+ cells and increased PCNA+ cells in epidermis and dermis, as well as promoted collagen deposition and α-SMA expression. Furthermore, CM-Dil-labeled hAECs survived to Day 5 but disappeared by Day 10 in diabetic wounds. These findings indicated that hAECs could inhibit diabetes-induced premature senescence and enhance the function of keratinocytes and fibroblasts via paracrine effects, partly by inhibiting RAGE/P21 signaling pathway. Thus, hAECs targeting cellular senescence induced by a hyperglycemic environment may be a new strategy for the treatment of diabetic wounds.

Delicately Controlled Polymer Orientation for High-Performance Non-Fullerene Solar Cells with Halogen-Free Solvent Processing.

Molecular orientation in polymer solar cells (PSCs) is a critical subject of investigation that promotes the quality of bulk heterojunction morphology and power conversion efficiency (PCE). Herein, the intrinsic polymer orientation transition can be found upon delicate control over the branching point position of the irregular alkoxy side chain in difluoroquinoxaline-thiophene-based conjugated polymers. Three polymers with branching points at the third, fourth, and fifth positions away from the backbone were synthesized and abbreviated as PHT3, PHT4, and PHT5, respectively. Temperature-dependent absorption behavior manifests the polymer aggregation ability in the order of PHT3 < PHT4 < PHT5. Surprisingly, the polymer orientation transition from typical face-on to edge-on emerged between PHT4 and PHT5, as evidenced by X-ray-scattering analysis. The enhanced face-on crystallinity of PHT4 endowed the o-xylene-processed PHT4:IT-4Cl-based devices with the highest PCE of 13.40%. For PHT5 with stronger aggregation, the related o-xylene-processed PSCs still showed a good PCE of 12.66%. Our results demonstrate that a delicate polymer orientation transition could be realized through a precisely controlled strategy of the side chain, yielding green-solvent-processed high-performance PSCs.

Hydrogen Evolution Prediction for Alternating Conjugated Copolymers Enabled by Machine Learning with Multidimension Fragmentation Descriptors.

Hydrogen evolution by alternating conjugated copolymers has attracted much attention in recent years. To study alternating copolymers with data-driven strategies, two types of multidimension fragmentation descriptors (MDFD), structure-based MDFD (SMDFD), and electronic property-based MDFD (EPMDFD), have been developed with machine learning (ML) algorithms for the first time. The superiority of SMDFD-based models has been demonstrated by the highly accurate and universal predictions of electronic properties. Moreover, EPMDFD-based, experimental-parameter-free ML models were developed for the prediction of the hydrogen evolution reaction, displaying excellent accuracy (real-test accuracy = 0.91). The combination of explainable ML approaches and first-principles calculations was employed to explore photocatalytic dynamics, revealing the importance of electron delocalization in the excited state. Virtual designing of high-performance candidates can also be achieved. Our work illustrates the huge potential of ML-based material design in the field of polymeric photocatalysts toward high-performance photocatalysis.

Introducing Siloxane-Terminated Side Chains in Small Molecular Donors for All-Small-Molecule Organic Solar Cells: Modulated Molecular Orientation and Enhanced Efficiency.

In this work, three small molecular donors (SMDs) S35, S35-1Si, and S35-2Si, with 3,5-difluorophenyl-substituted benzodithiophene as the central 2-dimensional unit to combine different numbers of siloxane-terminated side chain, were synthesized for all-small-molecule organic solar cells (ASM-OSCs). The three SMDs showed comparable film absorption peaks at 570 nm and optical band gaps of 1.8 eV. Relative to S35 and S35-1Si with symmetric alkyl side chains and asymmetric side chains on the central unit, respectively, the S35-2Si carrying two symmetric siloxane-terminated side chains displayed largely elevated melting and crystalline temperatures, lowered surface energy, and modulated molecular orientation. The three SMDs possessed edge-on dominated molecular orientations of their neat films; however, a big difference was found for their blend films with nonfullerene acceptor Y6. The S35:Y6 and S35-1Si:Y6 blends exhibited edge-on and face-on bimodal orientations but the S35-2Si:Y6 blend showed pure face-on orientation, indicating quite different donor:acceptor intermolecular interactions. Some large domains existed in the S35:Y6 and S35-1Si:Y6 blends, but could be suppressed by the S35-2Si:Y6 blend, leading to a more balanced charge transport. In ASM-OSCs, the two S35:Y6 and S35-1Si:Y6 active layers showed comparable power conversion efficiencies (PCE) of ∼12% but a much higher efficiency of 13.50% could be achieved with the S35-2Si:Y6 active layer. Our results suggest that the siloxane-terminated side chain is promising to regulate crystalline ability of a SMD, paving a way for high performance ASM-OSCs.

Cross-Linkable and Alcohol-Soluble Pyridine-Incorporated Polyfluorene Derivative as a Cathode Interface Layer for High-Efficiency and Stable Organic Solar Cells.

Device performance and commercialization of organic solar cells (OSCs) are strongly influenced by the characteristics of the interface layers. Cross-linked polymer interface layers with solvent-resistant properties are very compatible with large-area solution-processing methods of OSCs and may be beneficial to the environmental stability of OSCs due to the viscoelastic and cross-linked characteristics of the cross-linked polymer. In this work, a novel cross-linkable and alcohol-soluble pyridine-incorporated polyfluorene derivative, denoted as PFOPy, is synthesized and used as a cathode interface layer (CIL) in OSCs. For PFOPy, the pendant epoxy group can be effectively cross linked through cationic polymerization under thermal treatment and the pendant pyridine group can offer good alcohol solubility. Optical absorption tests of PFOPy films before/after washing by chloroform demonstrate the excellent solvent-resistance property for the cross-linked PFOPy film. Compared with the typical ZnO CIL, the cross-linked PFOPy CIL can also substantially reduce ITO's work function and form a better interface contact with the active layer. Utilizing an inverted device structure and a typical active layer of PM6:Y6, ZnO-based OSCs display an optimal power conversion efficiency (PCE) of 15.83% while PFOPy-based OSCs exhibit superior photovoltaic performance with an optimal PCE of 16.20%. Moreover, ZnO-based and PFOPy-based OSCs separately maintain 89% and 90% of the corresponding initial PCE after 12 h of illumination, indicating similarly excellent photostability. More importantly, after 26 complete thermal cycles, ZnO-based OSCs only maintain 81% of the initial PCE while PFOPy-based OSCs retain 92% of the initial PCE and exhibit obviously better thermal cycling stability, indicating that the cross-linked PFOPy CIL should offer stronger interface robustness against thermal cycling stress due to the viscoelastic and cross-linked characteristics of PFOPy. The impressive results indicate that the cross-linked PFOPy CIL would be a very promising CIL in OSCs.

Improvement of lung ischemia-reperfusion injury by inhibition of microRNA-155 via reductions in neuroinflammation and oxidative stress of vagal afferent nerve.

Lung ischemia-reperfusion injury (LIRI) is a common clinical concern. As the injury occurs, the pulmonary afferent nerves play a key role in regulating respiratory functions under pathophysiological conditions. The present study was to examine the effects of inhibiting microRNA-155 on the levels of proinflammatory cytokines and products of oxidative stress in the pulmonary vagal afferent nerves and the commissural nucleus of the solitary tract (cNTS) after LIRI. A rat model of LIRI was used. ELISA method was employed to examine proinflammatory cytokines, namely, IL-1ß, IL-6 and TNF-α; and key biomarkers of oxidative stress, 8-isoprostaglandin F2α (8-iso PGF2α) and 8-hydroxy-2'-deoxyguanosine (8-OHdG). In results, in the process of LIRI, the levels of microRNA-155 were amplified in the vagal afferent nerves and cNTS, and this was accompanied with increases of IL-1ß, IL-6 and TNF-α; and 8-iso PGF2α and 8-OHdG. Application of microRNA-155 inhibitor, but not its scramble, attenuated the elevation of proinflammatory cytokines and amplification of 8-iso PGF2α and 8-OHdG in those nerve tissues. In conclusion, we observed the abnormalities in the pulmonary afferent pathways at the levels of the peripheral nerves and brainstem, which is likely to affect respiratory functions as LIRI occurs. Our data suggest that blocking microRNA-155 signal pathways plays a beneficial role in regulating LIRI via inhibiting responses of neuroinflammation and oxidative stress signal pathways to LIRI.