RESUMO
The essential factor of catalytic ozonation technology relies on an efficient and stable catalyst. The construction of highly dispersed active sites on heterogeneous catalysts is an ideal strategy to combine the merits of homogeneous and heterogeneous catalysis with high activity and stability. Herein, an iron-containing mesoporous silica material (Fe-SBA15) with sufficient iron site exposure and enhanced intrinsic activity of active sites was employed to activate ozone for bisphenol A (BPA) degradation. Approximately 100% of BPA and 36.6% of total organic carbon (TOC) removal were realized by the Fe-SBA15 catalytic ozonation strategy with a reaction constant of 0.076 min-1, well beyond the performance of FeOx/SBA15 mixture and Fe2O3. Radical quenching experiments and electron paramagnetic resonance (EPR) analysis demonstrated that the hydroxyl radicals (HOâ¢) and superoxide radicals (O2â¢-) played an important role in the degradation process. The iron sites with recyclable Fe(III)/Fe(II) pairs act as both the electron donors and active sites for catalytic ozonation. The mesoporous framework of SBA15 in Fe-SBA15 stabilizes the iron sites that enhance its stability. With high catalytic performance and high reusability for catalytic ozonation of BPA, the Fe-SBA15 is expected to be a promising catalyst in catalytic ozonation for wastewater treatment.
Assuntos
Ozônio , Poluentes Químicos da Água , Ferro/química , Domínio Catalítico , Catálise , Ozônio/química , Poluentes Químicos da Água/análiseRESUMO
Piezoelectric mesocrystals as defective materials have been demonstrated to possess adsorptive and catalytic properties in redox reactions. However, there is still a lack of research on the quantitative relationship between the defect concentration and the piezocatalytic performance in piezoelectric mesocrystals. Herein, twin-hierarchical structure ZnO piezoelectric mesocrystals are taken with different oxygen-vacancies (OVs) concentrations to quantitatively investigate the effect of defect content on the peroxymonosulfate (PMS) piezo-activation in water purification. The ZnO piezoelectric mesocrystal with moderate OVs concentration exhibits a rapid antibiotic ornidazole (ORZ) pollutants degradation rate (0.034 min-1 ) and achieves a high PMS utilization efficiency (0.162) that exceeds the most state-of-the-art catalytic processes, while excessive OVs suppressed the piezocatalytic performance. Through calculations of electron property and reactants affinity, a quantitative relationship between OVs concentration and piezocatalytic properties is established. The ZnO mesocrystal with moderate OVs concentration realized increased electron delocalization, reduced charge transfer barrier, and enhanced reactants affinity, thus accelerating the kinetics of PMS activation. This work provides theoretical guidance for the application of defect engineering in mesocrystal to realize enhanced piezocatalytic performance.
RESUMO
Concurrent chemoradiotherapy is one of the main treatments for rectal cancer. Bone marrow suppression is one of the critical factors that affect the progress of radiotherapy. We aimed to explore the association of incidence of acute bone marrow suppression with dose-volume parameters of pelvic bone marrow among rectal cancer patients with concurrent chemoradiotherapy. We retrospectively analyzed 50 rectal cancer patients for multivariate logistic regression analyses. Three subdomains of pelvic bone marrow (PBM), bilateral ilium (IBM), lower pelvis (LPBM), and lumbosacral spine (LSBM) were assigned. The radiation dose-volume parameters from the three subdomains and the whole pelvis were evaluated. Compared to Grade 0-1 leukopenia patients, ≥Grade 2 leukopenia patients exhibited significantly higher levels of IBM V20, V25, V35, mean dose (Dmean), LPBM V20, V25, V30, LSBM V15, PBM V15, V20, and PTV. The PBM V20 of ≥Grade 2 neutropenia patients was significantly higher than that of Grade 0-1 neutropenia patients. Multivariate analysis have demonstrated that IBM V20 and LSBM V15 were the independent factors affecting ≥ Grade 2 leukopenia. There is a correlation between low dose-volume parameters with acute bone marrow suppression. IBM V20, LSBM V15 and PBM V20 can be employed as the predictors of acute bone marrow suppression.
RESUMO
Niobium dioxide can exhibit negative differential resistance (NDR) in metal-insulator-metal (MIM) devices, which has recently attracted significant interest for its potential applications as a highly non-linear selector element in emerging nonvolatile memory (NVM) and as a locally-active element in neuromorphic circuits. In order to further understand the processing of this material system, we studied the effect of thermal annealing on a 15 nm thick NbO2 thin film sandwiched inside a nanoscale MIM device and compared it with 180 nm thick blanket NbOx (x = 2 and 2.5) films deposited on a silicon dioxide surface as references. A systematic transmission electron microscope (TEM) study revealed a similar structural transition from amorphous to a distorted rutile structure in both cases, with a transition temperature of 700 °C for the NbO2 inside the MIM device and a slightly higher transition temperature of 750 °C for the reference NbO2 film. Quantitative composition analysis from electron energy loss spectroscopy (EELS) showed the stoichiometry of the nominal 15 nm NbO2 layer in the as-fabricated MIM device deviated from the target 1:2 ratio because of an interaction with the electrode materials, which was more prominent at elevated annealing temperature.
RESUMO
The oxidation of copper is a complicated process. Copper oxide develops two stable phases at room temperature and standard pressure (RTSP): cuprous oxide (Cu2O) and cupric oxide (CuO). Both phases have different optical and electrical characteristics that make them interesting for applications such as solar cells or resistive switching devices. For a given application, it is necessary to selectively control oxide thickness and cupric/cuprous oxide phase volume fraction. The thickness and composition of a copper oxide film growing on the surface of copper widely depend on the characteristics of as-deposited copper. In this Research Article, two samples, copper films prepared by two different deposition techniques, electron-beam evaporation and sputtering, were studied. As the core part of the study, the formation of the oxidized copper was analyzed routinely over a period of 253 days using spectroscopic polarized reflectometry-spectroscopic ellipsometry (RE). An effective medium approximation (EMA) model was used to fit the RE data. The RE measurements were complemented and validated by using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and X-ray diffraction (XRD). Our results show that the two samples oxidized under identical laboratory ambient conditions (RTSP, 87% average relative humidity) developed unique oxide films following an inverse-logarithmic growth rate with thickness and composition different from each other over time. Discussion is focused on the ability of RE to simultaneously extract thickness (i.e., growth rate) and composition of copper oxide films and on plausible physical mechanisms responsible for unique oxidation habits observed in the two copper samples. It appears that extended surface characteristics (i.e., surface roughness and grain boundaries) and preferential crystalline orientation of as-deposited polycrystalline copper films control the growth kinetics of the copper oxide film. Analysis based on a noncontact and nondestructive measurement, such as RE, to extract key material parameters is beneficial for conveniently understanding the oxidation process that would ultimately enable copper oxide-based devices at manufacturing scales.
RESUMO
An integrated memory cell with a mem-ristor and a trilayer crested barrier selector, showing repeatable nonlinear current-voltage switching loops is presented. The fully atomic-layer-deposited TaN1+x /Ta2 O5 /TaN1+x crested barrier selector yields a large nonlinearity (>10(4) ), high endurance (>10(8) ), low variability, and low temperature dependence.
RESUMO
Highly reproducible bipolar resistance switching was recently demonstrated in a composite material of Pt nanoparticles dispersed in silicon dioxide. Here, we examine the electrical performance and scalability of this system and demonstrate devices with ultrafast (<100 ps) switching, long state retention (no measurable relaxation after 6 months), and high endurance (>3 × 10(7) cycles). A possible switching mechanism based on ion motion in the film is discussed based on these observations.
RESUMO
Two new prenylated para-xylenes, named caulerprenylols A (1) and B (2), were isolated from the green alga Caulerpa racemosa, collected from the Zhanjiang coastline, China. The structures of the two metabolites were elucidated on the basis of detailed spectroscopic analysis. This is the first report of prenylated para-xylenes from marine algae and from marine organisms as well. Moreover, caulerprenylol B (2) is also characterized by an uncommon indane ring system. In in vitro bioassays, the new compounds exhibited a broad spectrum of antifungal activity against Candida glabrata (537), Trichophyton rubrum (Cmccftla), and Cryptococcus neoformans (32609) with MIC80 values between 4 and 64 µg/mL when compared to amphotericin B (MIC80 values of 2.0, 1.0, and 4.0 µg/mL, respectively) as a positive control and showed no growth inhibition activity against the tumor cells HL60 and A549.
Assuntos
Antifúngicos/química , Caulerpa/química , Xilenos/química , Antifúngicos/isolamento & purificação , Antifúngicos/farmacologia , Candida glabrata/efeitos dos fármacos , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Cryptococcus neoformans/efeitos dos fármacos , Células HL-60 , Humanos , Espectroscopia de Ressonância Magnética , Conformação Molecular , Trichophyton/efeitos dos fármacos , Xilenos/isolamento & purificação , Xilenos/farmacologiaRESUMO
TaO(x)-based memristors have recently demonstrated both subnanosecond resistance switching speeds and very high write/erase switching endurance. Here we show that the physical state variable that enables these properties is the oxygen concentration in a conduction channel, based on the measurement of the thermal coefficient of resistance of different TaO(x) memristor states and a set of reference Ta-O films of known composition. The continuous electrical tunability of the oxygen concentration in the channel, with a resolution of a few percent, was demonstrated by controlling the write currents with a one transistor-one memristor (1T1M) circuit. This study demonstrates that solid-state chemical kinetics is important for the determination of the electrical characteristics of this relatively new class of device.
RESUMO
By employing a precise method for locating and directly imaging the active switching region in a resistive random access memory (RRAM) device, a nanoscale conducting channel consisting of an amorphous Ta(O) solid solution surrounded by nearly stoichiometric Ta(2) O(5) is observed. Structural and chemical analysis of the channel combined with temperature-dependent transport measurements indicate a unique resistance switching mechanism.