Gas permeable membrane electrode assembly with in situ utilization of authigenic acid and base for transmembrane electro-chemisorption to enhance ammonia recovery from wastewater.

Ammonia recovery from wastewater is of great significance for aquatic ecology safety, human health and carbon emissions reduction. Electrochemical methods have gained increasing attention since the authigenic base and acid of electrochemical systems can be used as stripper and absorbent for transmembrane chemisorption of ammonia, respectively. However, the separation of electrodes and gas permeable membrane (GPM) significantly restricts the ammonia transfer-transformation process and the authigenic acid-base utilization. To break the restrictions, this study developed a gas permeable membrane electrode assembly (GPMEA), which innovatively integrated anode and cathode on each side of GPM through easy phase inversion of polyvinylidene fluoride binder, respectively. With the GPMEA assembled in a stacked transmembrane electro-chemisorption (sTMECS) system, in situ utilization of authigenic acid and base for transmembrane electro-chemisorption of ammonia was achieved to enhance the ammonia recovery from wastewater. At current density of 60 A/m2, the transmembrane ammonia flux of the GPMEA was 693.0 ± 15.0 g N/(m2·d), which was 86 % and 28 % higher than those of separate GPM and membrane cathode, respectively. The specific energy consumption of the GPMEA was 9.7∼16.1 kWh/kg N, which were about 50 % and 25 % lower than that of separate GPM and membrane cathode, respectively. Moreover, the application of GPMEA in the ammonia recovery from wastewater is easy to scale up in the sTMECS system. Accordingly, with the features of excellent performance, energy saving and easy scale-up, the GPMEA showed good prospects in electrochemical ammonia recovery from wastewater.

A stacked transmembrane electro-chemisorption system connected by hydrophobic gas permeable membranes for on-site utilization of authigenic acid and base to enhance ammonia recovery from wastewater.

The ammonia recovery from wastewater via electrochemical technologies represents a promising way for wastewater treatment, resource recovery, and carbon emissions reduction. However, chemicals consumption and reactors scalability of the existing electrochemical systems have become the key challenges for their development and application. In this study, a stacked transmembrane electro-chemisorption (sTMECS) system was developed to utilize authigenic acid and base on site for enhancing ammonia recovery from wastewater. The easily scaled up system was achieved via innovatively connecting the cathode chamber in a unit with the anode chamber in the adjacent unit by a hydrophobic gas permeable membrane (GPM). Thus, authigenic base at cathodes and authigenic acid at anodes could be utilized as stripper and absorbent on site to enhance the transmembrane chemisorption of ammonia. Continuous power supply, reducing the distances of electrodes to GPM and moderate aeration of the catholyte could promote ammonia recovery. Applied to the ammonia recovery from the simulated urine, the sTMECS under the current density 62.5 A/cm2 with a catholyte aeration rate of 3.2 L/(L⋅min) for operation time 4 h showed the transmembrane ammonia flux of 26.00 g N/(m2·h) and the system energy consumption of 10.5 kWh/kg N. Accordingly, the developed sTMECS system with chemicals saving, easy scale-up and excellent performance shows good prospects in recovering ammonia from wastewater.

[Improved unilateral puncture PVP based on 3D printing technology for the treatment of osteoporotic vertebral compression fracture].

OBJECTIVE: To investigate the clinical effect of unilateral percutaneous vertebroplasty (PVP) combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture. METHODS: A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study, all of which were vertebral body compression fractures caused by trauma. According to different treatment methods, they were divided into experimental group and control group. Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group, there were 5 males and 27 females, aged from 63 to 91 years old with an average of (77.59±8.75) years old. Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty, including 7 males and 38 females, aged from 60 to 88 years old with an average of(74.89±7.37) years old. Operation time, intraoperative C-arm X-ray times, anesthetic dosage, bone cement injection amount, bone cement diffusion good and good rate, complications, vertebral height, kyphotic angle (Cobb angle), visual analogue scale(VAS), Oswestry disability index (ODI) and other indicators were recorded before and after surgery, and statistically analyzed. RESULTS: All patients were followed up for 6 to 23 months, with preoperative imaging studies, confirmed for thoracolumbar osteoporosis compression fractures, two groups of patients with postoperative complications, no special two groups of patients' age, gender, body mass index (BMI), time were injured, the injured vertebral distribution had no statistical difference(P>0.05), comparable data. Two groups of patients with bone cement injection, bone cement dispersion rate, preoperative and postoperative vertebral body height, protruding after spine angle(Cobb angle), VAS, ODI had no statistical difference(P>0.05). The operative time, intraoperative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P<0.05). Compared with the traditional bilateral puncture group, the modified unilateral puncture group combined with 3D printing technology had shorter operation time, fewer intraoperative fluoroscopy times and less anesthetic dosage. The height of anterior vertebral edge, kyphosis angle (Cobb angle), VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P<0.05). CONCLUSION: In the treatment of thoracolumbar osteoporotic compression fractures, 3D printing technology is used to improve unilateral puncture PVP, which is convenient and simple, less trauma, short operation time, fewer fluoroscopy times, satisfactory distribution of bone cement, vertebral height recovery and kyphotic Angle correction, and good functional improvement.

Naturally Occurring and Widespread Resistance to Bioactive Natural Products.

Naturally occurring resistances diminish the effectiveness of antibiotics, and present significant challenges to human health. Human activities are usually considered as the main drivers of the dissemination of antibiotic resistance, however, the origin of the clinical antibiotic resistance can be traced to the environmental microbes, and the clinically relevant resistance determinants have already pre-existed in nature before the antibiotics come into clinic. In this concept, we present the naturally occurring and widespread resistance determinants recently discovered during the biosynthesis study of bioactive compounds. These widely prevalent resistances in environmental microbes, including antibiotic producers and non-producers, advance the understanding of the origin of resistance, and provide prediction for the clinically relevant resistance to aid in the rational design of more effective drug analogues to combat resistance.

Genome Mining and Biosynthetic Reconstitution of Fungal Depsidone Mollicellins Reveal a Dual Functional Cytochrome P450 for Ether Formation.

Depsidones are significant in structural diversity and broad in biological activities; however, their biosynthetic pathways have not been well understood and have attracted considerable attention. Herein, we heterologously reconstituted a depsidone encoding gene cluster from Ovatospora sp. SCSIO SY280D in Aspergillus nidulans A1145, leading to production of mollicellins, a representative family of depsidones, and discovering a bifunctional P450 monooxygenase that catalyzes both ether formation and hydroxylation in the biosynthesis of the mollicellins. The functions of a decarboxylase and an aromatic prenyltransferase are also characterized to understand the tailoring modification steps. This work provides important insights into the biosynthesis of mollicellins.

Discovery of Tetronate-Containing Kongjuemycins from a Coral-Associated Actinomycete and Elucidation of Their Biosynthetic Origin.

Tetronate antibiotics make up a growing family of natural products with a wide variety of biological activities. Herein, we report four new tetronates kongjuemycins (KJMs, 5-8) from a coral-associated actinomycete Pseudonocardia kongjuensis SCSIO 11457, and the identification and characterization of the KJM biosynthetic gene cluster (kjm) by heterologous expression, comparative genomic analysis, isotope labeling, and gene knockout studies. The biosynthesis of KJMs is demonstrated to harness diverse precursors from primary metabolism for building secondary metabolites.

An overview of recent advances and future prospects of three-dimensional biofilm electrode reactors (3D-BERs).

Three-dimensional biofilm electrode reactors (3D-BERs) have attracted extensive attention in recent years due to their wide application range, high efficiency and energy saving. On the basis of traditional bio-electrochemical reactor, 3D-BERs are filled with particle electrodes, also known as the third electrodes, which can not only be used as a carrier for microbial growth, but also improve the electron transfer rate of the whole system. This paper reviews the constitution, advantages and basic principles of 3D-BERs as well as current research status and progress of 3D-BERs in recent years. The selection of electrode materials, including cathode, anode and particle electrode are listed and analyzed. Different constructions of reactors, like 3D-unipolar extended reactor and coupled 3D-BERs are introduced and discussed. Various contaminants degraded by 3D-BERs including nitrogen, azo dyes, antibiotics and the others are calculated and the corresponding degradation effects are described. The influencing factors and mechanisms are also introduced. At the same time, according to the research advances of 3D-BERs, the shortcomings and weakness of this technology in the current research process are analyzed, and the future research direction of this technology is prospected. This review aims to summarize recent studies of 3D-BERs in bio-electrochemical reaction and open a bright window to this booming research theme.

Force-Mediated Endocytosis of Iron Oxide Nanoparticles for Magnetic Targeting of Stem Cells.

Stem cell therapy represents one of the most promising approaches for tissue repair and regeneration. However, the full potential of stem cell therapy remains to be realized. One major challenge is the insufficient homing and retention of stem cells at the desired sites after in vivo delivery. Here, we provide a proof-of-principle demonstration of magnetic targeting and retention of human muscle-derived stem cells (hMDSCs) in vitro through magnetic force-mediated internalization of magnetic iron oxide nanoparticles (MIONs) and the use of a micropatterned magnet. We found that the magnetic force-mediated cellular uptake of MIONs occurs through an endocytic pathway, and the MIONs were exclusively localized in the lysosomes. The intracellular MIONs had no detrimental effect on the proliferation of hMDSCs or their multilineage differentiation, and no MIONs were translocated to other cells in a coculture system. Using hMDSCs and three other cell types including human umbilical vein endothelial cells (HUVECs), human dermal fibroblasts (HDFs), and HeLa cells, we further discovered that the magnetic force-mediated MION uptake increased with MION size and decreased with cell membrane tension. We found that the cellular uptake rate was initially increased with MION concentration in solution and approached saturation. These findings provide important insight and guidance for magnetic targeting of stem cells in therapeutic applications.

Hepatitis B Virus X Protein Modulates p90 Ribosomal S6 Kinase 2 by ERK to Promote Growth of Hepatoma Cells.

Hepatitis B virus (HBV) infection is a leading cause of hepatocellular carcinoma (HCC), one of the most prevalent malignant tumors worldwide that poses a significant threat to human health. The multifunctional regulator known as Hepatitis B virus X-protein (HBx) interacts with host factors, modulating gene transcription and signaling pathways and contributing to hepatocellular carcinogenesis. The p90 ribosomal S6 kinase 2 (RSK2) is a member of the 90 kDa ribosomal S6 kinase family involved in various intracellular processes and cancer pathogenesis. At present, the role and mechanism of RSK2 in the development of HBx-induced HCC are not yet clear. In this study, we found that HBx upregulates the expression of RSK2 in HBV-HCC tissues, HepG2, and SMMC-7721 cells. We further observed that reducing the expression of RSK2 inhibited HCC cell proliferation. In HCC cell lines with stable HBx expression, RSK2 knockdown impaired the ability of HBx to promote cell proliferation. The extracellularly regulated protein kinases (ERK) 1/2 signaling pathway, rather than the p38 signaling pathway, mediated HBx-induced upregulation of RSK2 expression. Additionally, RSK2 and cyclic adenosine monophosphate (cAMP) response element binding protein (CREB) were highly expressed and positively correlated in HBV-HCC tissues and associated with tumor size. This study showed that HBx upregulates the expression of RSK2 and CREB by activating the ERK1/2 signaling pathway, promoting the proliferation of HCC cells. Furthermore, we identified RSK2 and CREB as potential prognostic markers for HCC patients.

A Widespread Glycosidase Confers Lobophorin Resistance and Host-Dependent Structural Diversity.

Identifying new environmental resistance determinants is significant to combat rising antibiotic resistance. Herein we report the unexpected correlation of a lobophorin (LOB) resistance-related glycosidase KijX with the host-dependent chemical diversity of LOBs, by a process of glycosylation, deglycosylation and reglycosylation. KijX homologues are widespread among bacteria, archaea and fungi, and encode the same glycohydrolytic activity on LOBs. The crystal structure of AcvX (a KijX homologue) shows a similar fold to that of the glycoside hydrolase family 113 and a special negatively charged groove to accommodate and deglycosylate LOBs. Antagonistic assays indicate kijX as a defense weapon of actinomycetes to combat LOB producers in environment, reflecting an elegant coevolution relationship. Our study provides insight into the KijX-related glycosidases as preexisting resistance determinants and represents an example of resistance genes accidentally integrated into natural product assembly.

The Isolation and Structure Elucidation of Spirotetronate Lobophorins A, B, and H8 from Streptomyces sp. CB09030 and Their Biosynthetic Gene Cluster.

Lobophorins (LOBs) are a growing family of spirotetronate natural products with significant cytotoxicity, anti-inflammatory, and antibacterial activities. Herein, we report the transwell-based discovery of Streptomyces sp. CB09030 from a panel of 16 in-house Streptomyces strains, which has significant anti-mycobacterial activity and produces LOB A (1), LOB B (2), and LOB H8 (3). Genome sequencing and bioinformatic analyses revealed the potential biosynthetic gene cluster (BGC) for 1-3, which is highly homologous with the reported BGCs for LOBs. However, the glycosyltransferase LobG1 in S. sp. CB09030 has certain point mutations compared to the reported LobG1. Finally, LOB analogue 4 (O-ß-D-kijanosyl-(1→17)-kijanolide) was obtained through an acid-catalyzed hydrolysis of 2. Compounds 1-4 showed different antibacterial activities against Mycobacterium smegmatis and Bacillus subtilis, which revealed the varying roles of different sugars in their antibacterial activities.

Biosynthetic Diversification of Fidaxomicin Aglycones by Heterologous Expression and Promoter Refactoring.

Fidaxomicin (Dificid) is a commercial macrolide antibiotic for treating Clostridium difficile infection. Total synthesis of fidaxomicin and its aglycone had been achieved through different synthetic schemes. In this study, an alternative biological route to afford the unique 18-membered macrolactone aglycone of fidaxomicin was developed. The promoter refactored fidaxomicin biosynthetic gene cluster from Dactylosporangium aurantiacum was expressed in the commonly used host Streptomyces albus J1074, thereby delivering five structurally diverse fidaxomicin aglycones with the corresponding titers ranging from 4.9 to 15.0 mg L-1. In general, these results validated a biological strategy to construct and diversify fidaxomicin aglycones on the basis of promoter refactoring and heterologous expression.

Aromatic Polyketides from the Mangrove-Derived Streptomyces sp. SCSIO 40069.

A chemical investigation of Streptomyces sp. SCSIO 40069 resulted in the isolation of a series of aromatic polyketides with rare skeletons, including five new compounds RM18c-RM18g (1-5) and three known ones (6-8). Their structures and absolute configurations were determined by diverse methods, including HRMS and NMR spectra, chemical reaction, Snatzke's method, quantum mechanical-nuclear magnetic resonance (QM-NMR), and X-ray crystallographic analysis. Compounds 1, 2, 4b, and 8 displayed moderate or weak antibacterial activities.

Comparison of lateral transperitoneal versus retroperitoneal laparoscopic adrenalectomy for pheochromocytoma: a single-centre retrospective study.

Laparoscopic adrenalectomy (LA) has became the standardized treatment for pheochromocytoma. The aim of this study was to evaluate outcomes of lateral transperitoneal and retroperitoneal LA for pheochromocytoma. Between January 2011 and December 2021, 142 patients with pheochromocytoma underwent LA via lateral transperitoneal (123 patients) or retroperitoneal (19 patients) approaches. Data of these patients were assessed to investigate the differences in perioperative outcomes and intraoperative haemodynamic parameters between the two procedures. Clinical parameters at presentation were comparable between the two groups, except for tumour size, which was larger in the transperitoneal group (50 [10-115] mm vs 35 [7-110] mm, P = 0.012). There were no significant differences between the two groups in terms of operation time, estimated blood loss, intraoperative transfusion rate, incidence of complications, conversion to open surgery, postoperative analgesic requirement, time to first oral intake, or mean hospital stay. Intraoperative haemodynamic parameters of the two groups were similar. After adjusting for tumour size using propensity score matching, both perioperative outcomes and haemodynamic parameters were still comparable. Lateral transperitoneal and retroperitoneal laparoscopic adrenalectomies provide similar perioperative and haemodynamic outcomes for surgical resection of pheochromocytoma.

Totopotensamide Congeners from a Halogenase-Inactivated Mutant.

The installation of halogen atoms into aromatic and less activated polyketide substrates by halogenases is a powerful strategy to tune the bioactivity, bioavailability, and reactivity of compounds. In the biosynthetic pathway of totopotensamide A (1), the halogenase TotH was confirmed in vivo to catalyze the C-4 chlorination to form the nonproteinogenic amino acid ClMeDPG. Herein, we report the isolation, structure elucidation, and bioactivity evaluation of six new deschloro totopotensamide (TPM) congeners TPMs H2-H7 (5-10) from the totH-inactivated strain and the proposed absolute configuration of the polyketide chain in TPMs using 4 as a model compound by a combination of the JBCA and bioinformatic analysis. Compounds 5, 6, 8, and 9 displayed cytotoxicity against the A549, PANC-1, Calu3, and BXPC3 cell lines with IC50 values ranging from 2.3 to 9.7 µM.

Genomics-Driven Discovery of Benzoxazole Alkaloids from the Marine-Derived Micromonospora sp. SCSIO 07395.

Benzoxazole alkaloids exhibit a diverse array of structures and interesting biological activities. Herein we report the identification of a benzoxazole alkaloid-encoding biosynthetic gene cluster (mich BGC) in the marine-derived actinomycete Micromonospora sp. SCSIO 07395 and the heterologous expression of this BGC in Streptomyces albus. This approach led to the discovery of five new benzoxazole alkaloids microechmycin A-E (1-5), and a previously synthesized compound 6. Their structures were elucidated by HRESIMS and 1D and 2D NMR data. Microechmycin A (1) showed moderate antibacterial activity against Micrococcus luteus SCSIO ML01 with the minimal inhibitory concentration (MIC) value of 8 µg mL-1.

Discovery of Efrotomycin Congeners and Heterologous Expression-Based Insights into the Self-Resistance Mechanism.

Four new efrotomycins, A1-A4 (1-4), were isolated from the salt mine-derived Amycolatopsis cihanbeyliensis DSM 45679 and structurally determined. Efrotomycins A3 (3) and A4 (4) feature a tetrahydrofuran ring configured distinctly from known elfamycins. Heterologous expression of the efrotomycin gene cluster (efr BGC) in Streptomyces lividans SBT18 led to efrotomycin B1 (5), the yield of which was improved several fold upon introduction of the transporter gene efrT, a putative self-resistance determinant outside of the efr BGC.

Multifunctional Magnetic Nanoclusters Can Induce Immunogenic Cell Death and Suppress Tumor Recurrence and Metastasis.

Metastasis is the predominant cause of cancer deaths due to solid organ malignancies; however, anticancer drugs are not effective in treating metastatic cancer. Here we report a nanotherapeutic approach that combines magnetic nanocluster-based hyperthermia and free radical generation with an immune checkpoint blockade (ICB) for effective suppression of both primary and secondary tumors. We attached 2,2'-azobis(2-midinopropane) dihydrochloride (AAPH) molecules to magnetic iron oxide nanoclusters (IONCs) to form an IONC-AAPH nanoplatform. The IONC can generate a high level of localized heat under an alternating magnetic field (AMF), which decomposes the AAPH on the cluster surface and produces a large number of carbon-centered free radicals. A combination of localized heating and free radicals can effectively kill tumor cells under both normoxic and hypoxic conditions. The tumor cell death caused by the combination of magnetic heating and free radicals led to the release or exposure of various damage-associated molecule patterns, which promoted the maturation of dendritic cells. Treating the tumor-bearing mice with IONC-AAPH under AMF not only eradicated the tumors but also generated systemic antitumor immune responses. The combination of IONC-AAPH under AMF with anti-PD-1 ICB dramatically suppressed the growth of untreated distant tumors and induced long-term immune memory. This IONC-AAPH based magneto-immunotherapy has the potential to effectively combat metastasis and control cancer recurrence.

Increasing the antioxidant capacity of ceria nanoparticles with catechol-grafted poly(ethylene glycol).

Ceria nanoparticles are remarkable antioxidants due to their large cerium(III) content and the possibility of recovering cerium(III) from cerium(IV) after reaction. Here we increase the cerium(III) content of colloidally stable nanoparticles (e.g., nanocrystals) using a reactive polymeric surface coating. Catechol-grafted poly(ethylene glycols) (PEG) polymers of varying lengths and architectures yield materials that are non-aggregating in a variety of aqueous media. Cerium(IV) on the ceria surface both binds and oxidizes the catechol functionality, generating a dark-red colour emblematic of surface-oxidized catechols with a concomitant increase in cerium(III) revealed by X-ray photoemission spectroscopy (XPS). The extent of ceria reduction depends sensitively on the architecture of the coating polymer; small and compact polymer chains pack with high density at the nanoparticle surface yielding the most cerium(III). Nanoparticles with increased surface reduction, quantified by the intensity of their optical absorption and thermogravimetric measures of polymer grafting densities, were more potent antioxidants as measured by a standard TEAC antioxidant assay. For the same core composition nanoparticle antioxidant capacities could be increased over an order of magnitude by tailoring the length and architecture of the reactive surface coatings.

When function is biological: Discerning how silver nanoparticle structure dictates antimicrobial activity.

Silver nanomaterials have potent antibacterial properties that are the foundation for their wide commercial use as well as for concerns about their unintended environmental impact. The nanoparticles themselves are relatively biologically inert but they can undergo oxidative dissolution yielding toxic silver ions. A quantitative relationship between silver material structure and dissolution, and thus antimicrobial activity, has yet to be established. Here, this dissolution process and associated biological activity is characterized using uniform nanoparticles with variable dimension, shape, and surface chemistry. From this, a phenomenological model emerges that quantitatively relates material structure to both silver dissolution and microbial toxicity. Shape has the most profound influence on antibacterial activity, and surprisingly, surface coatings the least. These results illustrate how material structure may be optimized for antimicrobial properties and suggest strategies for minimizing silver nanoparticle effects on microbes.