RESUMO
The anisotropic optical properties of aluminum scandium nitride (Al1-xScxN) thin films for both ordinary and extraordinary light are investigated. A quantitative analysis of the band structures of the wurtzite Al1-xScxN is carried out. In addition, Al1-xScxN photonic waveguides and bends are fabricated on 8-inch Si substrates. With x = 0.087 and 0.181, the light propagation losses are 5.98 ± 0.11â dB/cm and 8.23 ± 0.39â dB/cm, and the 90° bending losses are 0.05â dB/turn and 0.08â dB/turn at 1550â nm wavelength, respectively.
RESUMO
Background: Tracheobronchopathia osteochondroplastica (TPO) is a rare, benign, chronic disorder of unknown etiology. It is characterized by submucosal nodules, often calcified, which predominantly affect the anterolateral aspects of the trachea and main bronchi, while sparing the posterior bronchial wall. The co-occurrence of TPO and lung cancer is exceedingly rare. This report presents a case of TPO association with early-stage lung cancer, which was managed through surgical intervention. No active treatment was undertaken for the TPO. Case Description: A patient presented with a nodule in the right upper lobe, which was identified during a computed tomography (CT) scan of the chest, suggestive of early-stage lung cancer. Concurrently, multiple calcifications in the cartilaginous rings of the trachea were noted. Bronchoscopy revealed distinctive "pebblestone" nodules along the anterior and lateral tracheal walls, indicative of extensive TPO. The patient underwent bronchofiberscopy, which showed patency in the bronchial lumen of the right lung's upper lobe. A biopsy was not undertaken during this procedure. Comprehensive preoperative tests, including a blood biochemical examination, tumor-marker tests, lung-function tests, head-enhanced magnetic resonance imaging, abdominal ultrasound, and whole-body bone emission CT revealed no significant abnormalities. Despite this, the patient declined a whole-body positron emission tomography (PET)-CT scan. Given the potential malignancy of nodules in the right lung's upper lobe, the lobectomy for lung cancer was carried out, a procedure that would have proceeded irrespective of the presence or absence of TPO. Preoperative planning for potential tracheal intubation difficulties involved consultation with the anesthesiologist, resulting in a smooth intraoperative process. The pathology confirmed invasive adenocarcinoma. Post-surgery, the patient developed an infection in the right lung's lower lobe, identified as pseudomonas aeruginosa and Klebsiella pneumoniae through sputum culture and bronchoscopic lavage. Treatment with meropenem for 2 weeks, as guided by drug sensitivity results and respiratory advice, led to an improvement, allowing for discharge. A follow-up lung CT four months post-operation showed inflammation absorption in the right lower lobe. Conclusions: Surgical resection in cases of TPO association with lung cancer may have an increased risk of postoperative pulmonary infection. Proactive intraoperative sputum aspiration by anesthesiologists and the postoperative reinforcement of anti-infection measures, guided by drug sensitivity results, are recommended.
RESUMO
Bivalves hold an important role in marine aquaculture and the identification of growth-related genes in bivalves could contribute to a better understanding of the mechanism governing their growth, which may benefit high-yielding bivalve breeding. Somatostatin receptor (SSTR) is a conserved negative regulator of growth in vertebrates. Although SSTR genes have been identified in invertebrates, their involvement in growth regulation remains unclear. Here, we identified seven SSTRs (PySSTRs) in the Yesso scallop, Patinopecten yessoensis, which is an economically important bivalve cultured in East Asia. Among the three PySSTRs (PySSTR-1, -2, and -3) expressed in adult tissues, PySSTR-1 showed significantly lower expression in fast-growing scallops than in slow-growing scallops. Then, the function of this gene in growth regulation was evaluated in dwarf surf clams (Mulinia lateralis), a potential model bivalve cultured in the lab, via RNA interference (RNAi) through feeding the clams Escherichia coli containing plasmids expressing double-stranded RNAs (dsRNAs) targeting MlSSTR-1. Suppressing the expression of MlSSTR-1, the homolog of PySSTR-1 in M. lateralis, resulted in a significant increase in shell length, shell width, shell height, soft tissue weight, and muscle weight by 20%, 22%, 20%, 79%, and 92%, respectively. A transcriptome analysis indicated that the up-regulated genes after MlSSTR-1 expression inhibition were significantly enriched in the fat digestion and absorption pathway and the insulin pathway. In summary, we systemically identified the SSTR genes in P. yessoensis and revealed the growth-inhibitory role of SSTR-1 in bivalves. This study indicates the conserved function of somatostatin signaling in growth regulation, and ingesting dsRNA-expressing bacteria is a useful way to verify gene function in bivalves. SSTR-1 is a candidate target for gene editing in bivalves to promote growth and could be used in the breeding of fast-growing bivalves.
Assuntos
Bivalves , Pectinidae , Receptores de Somatostatina , Animais , Pectinidae/genética , Pectinidae/crescimento & desenvolvimento , Pectinidae/metabolismo , Bivalves/genética , Bivalves/crescimento & desenvolvimento , Bivalves/metabolismo , Receptores de Somatostatina/genética , Receptores de Somatostatina/metabolismo , Filogenia , Interferência de RNA , Regulação da Expressão Gênica no DesenvolvimentoRESUMO
The interference-less coded aperture correlation holography is a non-scanning, motionless, and incoherent technique for imaging three-dimensional objects without two-wave interference. Nevertheless, a challenge lies in that the coded phase mask encodes the system noise, while traditional reconstruction algorithms often introduce unwanted surplus background components during reconstruction. A deep learning-based method is proposed to mitigate system noise and background components simultaneously. Specifically, this method involves two sub-networks: a coded phase mask design sub-network and an image reconstruction sub-network. The former leverages the object's frequency distribution to generate an adaptive coded phase mask that encodes the object wave-front precisely without being affected by the superfluous system noise. The latter establishes a mapping between the autocorrelations of the hologram and the object, effectively suppresses the background components by embedding a prior physical knowledge and improves the neural network's adaptability and interpretability. Experimental results demonstrate the effectiveness of the proposed method in suppressing system noise and background components, thereby significantly improving the signal-to-noise ratio of the reconstructed images.
RESUMO
In semiconductor manufacturing, defect inspection in non-patterned wafer production lines is essential to ensure high-quality integrated circuits. However, in actual production lines, achieving both high efficiency and high sensitivity at the same time is a significant challenge due to their mutual constraints. To achieve a reasonable trade-off between detection efficiency and sensitivity, this paper integrates the time delay integration (TDI) technology into dark-field microscopy. The TDI image sensor is utilized instead of a photomultiplier tube to realize multi-point simultaneous scanning. Experiments illustrate that the increase in the number of TDI stages and reduction in the column fixed pattern noise effectively improve the signal-to-noise ratio of particle defects without sacrificing the detecting efficiency.
RESUMO
In the past 10 years, adaptive wavefront interferometry (AWI) has been employed for measuring freeform surface profiles. However, existing AWI techniques relying on stepwise and model-free stochastic optimizations have resulted in inefficient tests. To address these issues, deterministic adaptive wavefront interferometry (DAWI) is firstly introduced in this paper based on backpropagation (BP), which employs a loss function to simultaneously reconstruct and sparsify initial incomplete interferometric fringes until they are nulled. Each iteration of BP requires two phase shifts. Through simulations, we have verified that freeform wavefront error with a peak-to-valley (PV) of up to 168 λ can be fully compensated in tens of iterations using a 1024 × 1024 pixel area of a liquid-crystal spatial light modulator. In experiments, we accomplished a null test of a freeform surface with 80% missing interference fringes in 39 iterations, resulting in a surface profile error PV of 66.22 λ and measurement error better than λ/4. The DAWI has at least 20 times fewer iterations in fringe reconstruction than the 3-step AWI methods, and nearly an order of magnitude fewer iterations in the whole process, paving the way for significantly enhanced efficiency, generality and precision in freeform surface adaptive interferometry.
RESUMO
Phase measuring deflectometry is a powerful measurement tool of optical surfaces, but the measuring accuracy relies on the quality of system calibration. Calibration errors arise from the oversimplified imaging models, error accumulation and amplification, and the bias in numerical optimization. A holistic calibration method is proposed to shorten the error propagation chain. The descriptive prowess of the imaging system is enhanced by calculating each incident ray independently and compensating the systematic errors resulting from the form error of the calibration mirror. Finally, a holonomic framework prior is defined to guarantee the calibration reliability by utilizing the physical constraints of the measurement system. Experimental results demonstrate that the proposed method improves measurement accuracy by at least 38% compared to traditional approaches.
RESUMO
Digital holographic microscopy is an important measurement method for micro-nano structures. However, when the structured features are of high-slopes, the interference fringes can become too dense to be recognized. Due to the Nyquist's sampling limit, reliable wavefront restoration and phase unwrapping are not feasible. To address this problem, the interference fringes are proposed to be sparsified by tilting the reference wavefronts. A data fusion strategy including region extraction and tilt correction is developed for reconstructing the full-area surface topographies. Experimental results of high-slope elements demonstrate the validity and reliability of the proposed method.
RESUMO
This study aimed to address the issue of high-temperature challenges in asphalt pavement by developing two types of phase change materials (PCMs) for temperature control. Encapsulated paraffin wax particles (EPWP) and encapsulated myristic acid particles (EMAP) were synthesized using acid-etched ceramsite (AECS) as the carrier, paraffin wax (PW) or myristic acid (MA) as the core material, and a combination of epoxy resin and cement as the encapsulation material. The investigation encompassed leakage tests on PCMs; rutting plate rolling forming tests; SEM, FTIR, XRD, and TG-DSC microscopic tests; as well as heat storage and release tests and temperature control assessments using a light heating device. The study revealed the following key findings. Both types of PCMs exhibited no PCM leakage even under high temperatures and demonstrated low crushing ratios during rut-forming tests. Microscopic evaluations confirmed the chemical stability and phase compatibility of the constituents within the two types of PCMs. Notably, the phase change enthalpies of EPWP and EMAP were relatively high, measuring 133.31 J/g and 138.52 J/g, respectively. The utilization of AECS as the carrier for PCMs led to a substantial 4.61-fold increase in the adsorption rate. Moreover, the PCMs showcased minimal mass loss at 180 °C, rendering them suitable for asphalt pavement applications. The heat storage and release experiments further underscored the PCMs' capacity to regulate ambient temperatures through heat absorption and release. When subjected to light heating, the maximum temperatures of the two types of phase change Marshall specimens were notably lower by 6.6 °C and 4.8 °C, respectively, compared to standard Marshall specimens. Based on comprehensive testing, EPWP displayed enhanced adaptability and demonstrated substantial potential for practical implementation in asphalt pavements.
RESUMO
Digital holography has transformative potential in measuring stacked-chip microstructures due to its noninvasive, single-shot, full-field characteristics. However, uncertainties in reconstruction distance inevitably lead to resolving blur and reconstruction distortion. Herein, we propose a phase-based reconstruction optimization method that consists of a phase-evaluation function and a structured surface-characterization model. Our proposed method involves setting a reconstruction distance range, obtaining phase information using sliced numerical reconstruction, and optimizing the reconstruction distance by finding the extreme value of the function, which identifies the focal plane of the reconstructed image. The structure of the surface topography is then characterized using the characterization model. We perform simulations of the recording, reconstruction, and characterization to verify the effectiveness of the proposed method. To further demonstrate the approach, a simple holographic recording system is constructed to measure a standard resolution target, and the measurement results are compared with a commercial instrument. The simulation and experiment demonstrate, respectively, 31.16% and 34.41% improvement in step-height characterization accuracy.
RESUMO
Non-small-cell lung cancer (NSCLC) is a dominating type of lung cancer with high morbidity and mortality. Midazolam has been reported to promote cell apoptosis in NSCLC, but the molecular mechanism of midazolam remains to be further explored. In the current work, cell viability, proliferation, migration, and apoptosis rates of NSCLC cells treated with midazolam were measured using cell counting kit-8 assay, 5-ethynyl-2'-deoxyuridine (EdU) and colony formation assays, transwell, and flow cytometry assay, respectively, to evaluate the malignant behaviors. Western blot was applied to access EGFR/MEK/ERK pathway-related protein levels. The results demonstrated midazolam significantly declined the viability of NSCLC cells. Furthermore, midazolam restrained cell proliferation and migration and contributed to cell apoptosis in NSCLC. Midazolam exerted suppressive function to EGFR pathway during NSCLC development. Moreover, the activation of EGFR/MEK/ERK pathway abrogated the effects of midazolam on NSCLC cell proliferation, apoptosis, and migration. Taken together, midazolam exhibited anti-tumor effects hallmarked by EGFR pathway inhibition, providing a novel insight into the treatment of NSCLC.
RESUMO
Paralytic shellfish toxins (PST) could be accumulated in bivalves and cause safety problems. To protect public health, bivalves are examined for PST contamination before entering the market, usually by high-performance liquid chromatography (HPLC) or LC-tandem mass spectrometry (LC-MS/MS) in the lab, which needs PST standards not all available and is time-consuming for large sample sizes. To detect PST toxicity in bivalves rapidly and sensitively, a biomarker gene is highly demanded, but the related study is very limited. In this study, we fed a commercially important bivalve, Patinopecten yessoensis, with the PST-producing dinoflagellate Alexandrium catenella. After 1, 3, and 5 days of exposure, both PST concentrations and toxicity levels in the digestive gland continuously increased. Transcriptome analysis revealed that the differentially expressed genes were significantly enriched in oxidation-reduction process, which included the cytochrome P450 genes (CYPs), type I iodothyronine deiodinase (IOD1s), peroxidasin (PXDN), and acyl-Coenzyme A oxidase 1 (ACOX1) at day 1 and a superoxide dismutase (SOD) at day 5, highlighting the crucial roles of these genes in response to oxidative stress induced by PST. Among the 33 continuously upregulated genes, five showed a significant correlation between gene expression and PST concentration, with the highest correlation present in PyC1QL4-1, the gene encoding Complement C1Q-like protein 4, C1QL4. In addition, the correlation between PyC1QL4-1 expression and PST toxicity was also the highest. Further analysis in another aquaculture scallop (Chlamys farreri) indicated that the expression of CfC1QL4-1, the homolog of PyC1QL4-1, also exhibited significant correlations with both PST toxicity and concentration. Our results reveal the gene expression responses of scallop digestive glands to PST-producing algae and indicate that the C1QL4-1 gene might be a potential biomarker for PST monitoring in scallops, which may provide a convenient way for the early warning and sensitive detection of PST contamination in the bivalves.
RESUMO
We propose a polarized, angle-resolved spectral (PARS) reflectometry for simultaneous thickness and refractive-index measurement of ultra-thin films in real time. This technology acquires a two-dimensional, angle-resolved spectrum through a dual-angle analyzer in a single shot by radially filtering the back-focal-plane image of a high-NA objective for dispersion analysis. Thus, film parameters, including thickness and refractive indices, are precisely fitted from the hyper-spectrum in angular and wavelength domains. Through a high-accuracy spectral calibration, a primary PARS system was built. Its accuracy was carefully verified by testing a set of SiO2 thin films of thicknesses within two µm grown on monocrystalline-Si substrates against a commercial spectroscopic ellipsometer. Results show that the single-shot PARS reflectometry results in a root-mean-square absolute accuracy error of â¼1â nm in film thickness measurement without knowing its refractive indices.
RESUMO
The orbital angular momentum (OAM) holography has been identified as a vital approach for achieving ultrahigh-capacity in 3D displays, digital holographic microscopy, data storage and so on. However, depth has not been widely applied as a multiplexing dimension in the OAM holography mainly because of the serious coherence crosstalk between different image layers. The multi-layered depth multiplexing OAM holography is proposed and investigated. To suppress the coherence crosstalk between different image channels, random phases are used for encoding different image layers separately. An image can be reconstructed with high quality at a specific depth from an appropriate OAM mode. It is demonstrated that the depth multiplexing of up to 5 layers can be achieved. This work can increase the information capacity and enhance the application of the OAM holography.
RESUMO
The hemispherical shell resonator (HSR) is the core and sensitive part of a hemispherical resonator gyro. The geometrical accuracy and vibration properties of HSR determine the navigation performance of the system. A lack of areal measurement methods of vibration modes limits investigation of the kinetic mechanism and improvement in navigation performance. Consequently, an areal measurement method is developed based on deflectometry. The blurry spots on the image plane reflected from the vibrating HSR are extracted, and the blurring trajectories are obtained by the Wiener deconvolution method. The vibrating amplitude distribution of a standing wave mode is transformed into the swing angle distribution of normal vectors. The parameters of the vibration mode are fitted by the Levenberg-Marquardt method. This method can find widespread applications in the areal inspection of vibration modes.
RESUMO
The orbital angular momentum (OAM) holography has been identified as a vital approach for achieving ultrahigh-capacity multiplexation without a theoretical helical phase index limit. However, the encoding and decoding of an OAM hologram require a complete helical phase mode, which does not take full utilization of the angular space. In this paper, the partial OAM holography is proposed by dividing an OAM mode into several partial orbital angular momentums and encode each partial mode with a different target image. An image can only be reconstructed using an appropriate partial OAM mode within a specific illuminating angular range, henceforth holographic multiplexation of images can be realized. This method can significantly increase the holographic information capacity and find widespread applications.
RESUMO
Freeform optics, offering high degrees of design freeform to control light propagation, have already been widely applied in various photoelectric equipment. The form quality of those optics is crucial to their opto-electronics functionalities, which requires to be measured accurately. The deflectometry is a promising technology to test the complex freeform surfaces. In general, there is a designed surface model for the monoscopic deflectometry to estimate the positions of whole measured points to solve the issue of height-slope ambiguity. However, the unknown or inaccurate surface model can induce errors into the measured normal, thereby decreasing the measurement precision. In this paper, without relying on the known surface model, the proposed method iteratively optimizes a sphere model to describe the measured surface by changing the spherical radius. In order to reduce the global error, the space-variant spheres are optimized, respectively, to estimate the whole-aperture surface coordinate. With the help of the iteration surface reconstruction process, the optimal number of the space-variant spheres is achieved to meantime obtain the final reconstructed surface. Compared to the measurements by using the plane model, the form accuracy can be improved by three times. Experiments demonstrate that the proposed method can successfully reconstruct the complex surfaces without the need of a known surface model, which can greatly improve the measuring flexibility and measurement accuracy.
RESUMO
Optofluidic microlenses are one of the crucial components in many miniature lab-on-chip systems. However, many optofluidic microlenses are fabricated through complex micromachining and tuned by high-precision actuators. We propose a kind of tunable optofluidic microbubble lens that is made by the fuse-and-blow method with a fiber fusion splicer. The optical focusing properties of the microlens can be tuned by changing the refractive index of the liquid inside. The focal spot size is 2.8 µm and the focal length is 13.7 µm, which are better than those of other tunable optofluidic microlenses. The imaging capability of the optofluidic microbubble lens is demonstrated under a resolution test target and the imaging resolution can reach 1 µm. The results indicate that the optofluidic microbubble lens possesses good focusing properties and imaging capability for many applications, such as cell counting, optical trapping, spatial light coupling, beam shaping and imaging.
Assuntos
Lentes , Técnicas Analíticas Microfluídicas , Contagem de Células , Microbolhas , RefratometriaRESUMO
Surface hydroxyl is widely perceived as conducive to HCHO degradation. Here, a kind of sodium titanate with interlayered hydroxyls (NaTi2HO5) was prepared to study the action conditions of surface hydroxyls in HCHO oxidation. The nanotubes mainly exposing (001) and nanobelts mainly exposing (100) are synthesized as the two morphologies of NaTi2HO5. We found the (001) facet is much more favored to HCHO adsorption via HRTEM and XPS analysis. The DFT calculations prove that the synergy of surface hydroxyl and Na atom is perfect for HCHO chemisorption. By this means NaTi2HO5 nanotubes can partially oxidize HCHO into formate and release very few CO, measured by in situ DRIFTS. Dominated by Pt nanoparticles, the complete oxidation of HCHO can be performed on NaTi2HO5 nanotubes with enhanced early reaction speed. Rather than simple surface hydroxyl, the effective synergy of hydroxyl and positive ion is proposed as an advantage for HCHO oxidation.
RESUMO
Phase measuring deflectometry is a powerful measuring method of complex optical surfaces that captures the reflected fringe images associated with a displaying screen and calculates the normal vectors of the surface under test (SUT) accordingly. The captured images are usually set conjugate to the SUT, which in turn makes the screen defocused. As a result, the blurring effect caused by the defocus and aberrations of the off-axis catadioptric imaging system can severely degrade the phases solved from the blurred images. In order to correct the phase errors, the space-variant point spread functions (PSFs) are modeled using a skew-normal function. The phase bias is estimated by forward convolution between the captured images and the PSF models. Demonstrated with a highly curved aspheric surface, the measurement accuracy can be improved by three times.