Phage-induced "one-to-many" FRET sensor for highly sensitive detection of Escherichia coli O157:H7.

As a foodborne pathogen capable of causing severe illnesses, early detection of Escherichia coli O157:H7 (E. coli O157:H7) is crucial for ensuring food safety. While Förster resonance energy transfer (FRET) is an efficient and precise detection technique, there remains a need for amplification strategies to detect low concentrations of E. coli O157:H7. In this study, we presented a phage (M13)-induced "one to many" FRET platform for sensitively detecting E. coli O157:H7. The aptamers, which specifically recognize E. coli O157:H7 were attached to magnetic beads as capture probes for separating E. coli O157:H7 from food samples. The peptide O157S, which specifically targets E. coli O157:H7, and streptavidin binding peptide (SBP), which binds to streptavidin (SA), were displayed on the P3 and P8 proteins of M13, respectively, to construct the O157S-M13K07-SBP phage as a detection probe for signal output. Due to the precise distance (≈3.2 nm) between two neighboring N-terminus of P8 protein, the SA-labeled FRET donor and acceptor can be fixed at the Förster distance on the surface of O157S-M13K07-SBP via the binding of SA and SBP, inducing FRET. Moreover, the P8 protein, with ≈2700 copies, enabled multiple FRET (≈605) occurrences, amplifying FRET in each E. coli O157:H7 recognition event. The O157S-M13K07-SBP-based FRET sensor can detect E. coli O157:H7 at concentration as low as 6 CFU/mL and demonstrates excellent performance in terms of selectivity, detection time (≈3 h), accuracy, precision, practical application, and storage stability. In summary, we have developed a powerful tool for detecting various targets in food safety, environmental monitoring, and medical diagnosis.

Machine Learning Approach in Dosage Individualization of Isoniazid for Tuberculosis.

INTRODUCTION: Isoniazid is a first-line antituberculosis agent with high variability, which would profit from individualized dosing. Concentrations of isoniazid at 2 h (C2h), as an indicator of safety and efficacy, are important for optimizing therapy. OBJECTIVE: The objective of this study was to establish machine learning (ML) models to predict the C2h, that can be used for establishing an individualized dosing regimen in clinical practice. METHODS: Published population pharmacokinetic (PopPK) models for adults were searched based on PubMed and ultimately four reliable models were selected for simulating individual C2h datasets under different conditions (demographics, genotype, ethnicity, etc.). Machine learning models were trained on simulated C2h obtained from the four PopPK models. Five different algorithms were used for ML model building to predict C2h. Real-world data were used for predictive performance evaluations. Virtual trials were used to compare ML-optimized doses with PopPK model-optimized doses. RESULTS: Categorical boosting (CatBoost) exhibited the highest prediction ability. Target C2h can be predicted using the ML model combined with the dosing regimen and three covariates (N-acetyltransferase 2 [NAT2] genotypes, weight and race [Asians and Africans]). Real-world data validation results showed that the ML model can achieve an overall prediction accuracy of 93.4%. Using the final ML model, the mean absolute prediction error value decreased by 45.7% relative to the average of PopPK models. Using the ML-optimized dosing regimen, the probability of target attainment increased by 43.7% relative to the PopPK model-optimized dosing regimens. CONCLUSION: Machine learning models were developed with great predictive performance, which can be used to determine the individualized initial dose of isoniazid in adult patients.

Optimal use of ß-lactams in neonates: machine learning-based clinical decision support system.

BACKGROUND: Accurate prediction of the optimal dose for ß-lactam antibiotics in neonatal sepsis is challenging. We aimed to evaluate whether a reliable clinical decision support system (CDSS) based on machine learning (ML) can assist clinicians in making optimal dose selections. METHODS: Five ß-lactam antibiotics (amoxicillin, ceftazidime, cefotaxime, meropenem and latamoxef), commonly used to treat neonatal sepsis, were selected. The CDSS was constructed by incorporating the drug, patient, dosage, pharmacodynamic, and microbiological factors. The CatBoost ML algorithm was used to build the CDSS. Real-world studies were used to evaluate the CDSS performance. Virtual trials were used to compare the CDSS-optimized doses with guideline-recommended doses. FINDINGS: For a specific drug, by entering the patient characteristics and pharmacodynamic (PD) target (50%/70%/100% fraction of time that the free drug concentration is above the minimal inhibitory concentration [fT > MIC]), the CDSS can determine whether the planned dosing regimen will achieve the PD target and suggest an optimal dose. The prediction accuracy of all five drugs was >80.0% in the real-world validation. Compared with the PopPK model, the overall accuracy, precision, recall, and F1-Score improved by 10.7%, 22.1%, 64.2%, and 43.1%, respectively. Using the CDSS-optimized doses, the average probability of target concentration attainment increased by 58.2% compared to the guideline-recommended doses. INTERPRETATION: An ML-based CDSS was successfully constructed to assist clinicians in selecting optimal ß-lactam antibiotic doses. FUNDING: This work was supported by the National Natural Science Foundation of China; Distinguished Young and Middle-aged Scholar of Shandong University; National Key Research and Development Program of China.

Providing biomimetic microenvironment for pulp regeneration via hydrogel-mediated sustained delivery of tissue-specific developmental signals.

Regenerative endodontic therapy is a promising approach to restore the vitality of necrotic teeth, however, pulp regeneration in mature permanent teeth remains a substantial challenge due to insufficient developmental signals. The dentin is embryologically and histologically similar to the pulp, which contains a cocktail of pulp-specific structural proteins and growth factors, thus we proposed an optimizing strategy to obtain dentin matrix extracted proteins (DMEP) and engineered a DMEP functionalized double network hydrogel, whose physicochemical property was tunable by adjusting polymer concentrations to synchronize with regenerated tissues. In vitro models showed that the biomimetic hydrogel with sustained release of DMEP provided a beneficial microenvironment for the encapsulation, propagation and migration of human dental pulp stem cells (hDPSCs). The odontogenic and angiogenic differentiation of hDPSCs were enhanced as well. To elicit the mechanism hidden in the microenvironment to guide cell fate, RNA sequencing was performed and 109 differential expression of genes were identified, the majority of which enriched in cell metabolism, cell differentiation and intercellular communications. The involvement of ERK, p38 and JNK MAPK signaling pathways in the process was confirmed. Of note, in vivo models showed that the injectable and in situ photo-crosslinkable hydrogel was user-friendly for root canal systems and was capable of inducing the regeneration of highly organized and vascularized pulp-like tissues in root segments that subcutaneously implanted into nude mice. Taken together, this study reported a facile and efficient way to fabricate a cell delivery hydrogel with pulp-specific developmental cues, which exhibited promising application and translation potential in future regenerative endodontic fields.

Enhancing Solar Steam Generation of Hydrogels via Silver Nanoparticle-Doped Cellulose Nanofibers.

Solar steam generation (SSG) is regarded as an efficient approach for harnessing solar energy to purify polluted or saline water. Herein, we demonstrate a hydrogel composed of cellulose nanofibers (CNFs), polyethylenimine (PEI), and reduced graphene oxide (rGO) that functions as an independent solar steam generator, which shows enhanced solar water evaporation efficiency by incorporating silver nanoparticles (AgNPs). It presented that the presence of AgNPs increases the photothermal conversion efficiency and thermal conductivity of the evaporator and reduces the enthalpy of evaporation. As a result, an outstanding water evaporation rate of 3.62 kg m-2 h-1 and a photothermal conversion efficiency of 96.25% are successfully obtained under one sun illumination. Also, the resulting hydrogel exhibits exceptional mechanical properties, as well as outstanding desalination and salt-resistant abilities during prolonged seawater desalination. In oil/water mixtures, the evaporation of the hydrogel decreases to 2.94 kg m-2 h-1, owing to the oil layer barrier. This work paves a reference approach to produce easily addressed cellulose nanofiber (CNF)-based hydrogel evaporators with significantly enhanced evaporation rates.

When quantum dots meet blue phase liquid crystal elastomers: visualized full-color and mechanically-switchable circularly polarized luminescence.

Polymer-based circularly polarized luminescence (CPL) materials with the advantage of diversified structure, easy fabrication, high thermal stability, and tunable properties have garnered considerable attention. However, adequate and precise tuning over CPL in polymer-based materials remains challenging due to the difficulty in regulating chiral structures. Herein, visualized full-color CPL is achieved by doping red, green, and blue quantum dots (QDs) into reconfigurable blue phase liquid crystal elastomers (BPLCEs). In contrast to the CPL signal observed in cholesteric liquid crystal elastomers (CLCEs), the chiral 3D cubic superstructure of BPLCEs induces an opposite CPL signal. Notably, this effect is entirely independent of photonic bandgaps (PBGs) and results in a high glum value, even without matching between PBGs and the emission bands of QDs. Meanwhile, the lattice structure of the BPLCEs can be reversibly switched via mechanical stretching force, inducing on-off switching of the CPL signals, and these variations can be further fixed using dynamic disulfide bonds in the BPLCEs. Moreover, the smart polymer-based CPL systems using the BPLCEs for anti-counterfeiting and information encryption have been demonstrated, suggesting the great potential of the BPLCEs-based CPL active materials.

Effect of cooking methods on volatile compounds and texture properties in maize porridge.

To investigate the optimal processing of maize porridge, the volatile compounds and texture under different cooking methods and time have been studied. A total of 51 volatile compounds were identified in maize porridge. Notably, the major volatiles, aldehydes and esters exhibited a relatively high content in electric pressure cooker (EPC), and esters tend to significantly increase after cooking. Among aldehydes, nonanal and hexanal played a great role in flavor due to their relatively high content. Volatile compounds of maize porridge in different cooking methods could be clearly distinguished by multiple chemometrics. Furthermore, texture analysis revealed that almost all the indicators in the EPC can reach the lowest value at 60 min. To summarize, different cooking methods had a more significant influence on the volatile compounds and texture compared to time. This study helps to improve the sensory attributes of maize porridge, and thus contributes to healthier and more sustainable production.

Electric Field Effects in Flash Joule Heating Synthesis.

Flash Joule heating has emerged as an ultrafast, scalable, and versatile synthesis method for nanomaterials, such as graphene. Here, we experimentally and theoretically deconvolute the contributions of thermal and electrical processes to the synthesis of graphene by flash Joule heating. While traditional methods of graphene synthesis involve purely chemical or thermal driving forces, our results show that the presence of charge and the resulting electric field in a graphene precursor catalyze the formation of graphene. Furthermore, modulation of the current or the pulse width affords the ability to control the three-step phase transition of the material from amorphous carbon to turbostratic graphene and finally to ordered (AB and ABC-stacked) graphene and graphite. Finally, density functional theory simulations reveal that the presence of a charge- and current-induced electric field inside the graphene precursor facilitates phase transition by lowering the activation energy of the reaction. These results demonstrate that the passage of electrical current through a solid sample can directly drive nanocrystal nucleation in flash Joule heating, an insight that may inform future Joule heating or other electrical synthesis strategies.

Diatomite@MoS2 Nanocomposite Layers as Composite Coating Targeting for Mg Alloys Endowed with Properties of Anticorrosion and Antiwear.

Molybdenum disulfide (MoS2) demonstrates promising applications in enhancing the corrosion and wear resistance of metals, but the susceptibility of this nanomaterial to agglomeration hinders its overall performance. In this study, the externally assisted corrosion inhibitor sodium molybdate (SM) was successfully constructed in diatomaceous earth (DE) and molybdenum disulfide (MoS2). This not only served as a molybdenum source for MoS2 but also enabled the preparation of DE@MoS2-SM microcapsules, achieving a corrosion inhibitor loading of up to 23.23%. The corrosion testing reveals that the composite coating, when compared to the pure epoxy coating, exhibits an impedance modulus 2 orders of magnitude higher (1.80 × 109 Ω·cm2), offering prolonged protection for magnesium alloys over a 40 day period. Furthermore, a filler content of 3% sustains a coefficient of friction (COF) at 0.55 for an extended duration, indicating commendable stability and wear resistance. The protective performance is ascribed to the synergistic enhancement of corrosion and wear resistance in the coatings, facilitated by the pore structure of DE, the high hardness of MoS2, and the obstructive influence of Na2MoO4. This approach offers a straightforward and efficient means of designing microcapsules for use in corrosive environments, whose application can be extended in industrial fields. In particular, we promote the application of nautical instruments, underwater weapons, and seawater batteries in the shipbuilding industry and marine engineering.

In situ Light-Writable Orientation Control in Liquid Crystal Elastomer Film Enabled by Chalcones.

Liquid crystal elastomers (LCEs) are stimulus-responsive materials with intrinsic anisotropy. However, it is still challenging to in situ program the mesogen alignment to realize three-dimensional (3D) deformations with high-resolution patterned structures. This work presents a feasible strategy to program the anisotropy of LCEs by using chalcone mesogens that can undergo a photoinduced cycloaddition reaction under linear polarized light. It is shown that by controlling the polarization director and the irradiation region, patterned alignment distribution in a freestanding LCE film can be created, which leads to complex and reversible 3D shape-morphing behaviors. The work demonstrates an in situ light-writing method to achieve sophisticated topography changes in LCEs, which has potential applications in encryption, sensors, and beyond.

Nicotinamide Riboside Modulates HIF-1 Signaling to Maintain and Enhance Odontoblastic Differentiation in Human Dental Pulp Stem Cells.

Human dental pulp stem cells (hDPSCs) play a vital role in the regeneration of the pulp-dentin complex after pulp disease. While the regeneration efficiency relies on the odontoblastic differentiation capacity of hDPSCs, this is difficult to regulate within the pulp cavity. Although nicotinamide riboside (NR) has been found to promote tissue regeneration, its specific role in pulp-dentin complex regeneration is not fully understood. Here, we aimed to explore the role of NR in the odontoblastic differentiation of hDPSCs and its underlying molecular mechanism. It was found that NR enhanced the viability and retarded senescence in hDPSCs with higher NAD+/NADH levels. In contrast to the sustained action of NR, the multi-directional differentiation of hDPSCs was enhanced after NR pre-treatment. Moreover, in an ectopic pulp regeneration assay in nude mice, transplantation of hDPSCs pretreated with NR promoted the formation of a dentin-like structure surrounded by cells positively expressing DMP-1 and DSPP. RNA-Seq demonstrated inhibition of the HIF-1 signaling pathway in hDPSCs pretreated with NR. The number of HIF-1α-positive cells was significantly decreased in hDPSCs pretreated by NR in vivo. Similarly, NR significantly downregulated the expression of HIF-1α in vitro. The findings suggested that NR could potentially regulate hDPSC odontoblastic differentiation and promote the development of innovative strategies for dental pulp repair.

A first-in-human phase 1 study of simnotrelvir, a 3CL-like protease inhibitor for treatment of COVID-19, in healthy adult subjects.

Safe and efficacious antiviral therapeutics are in urgent need for the treatment of coronavirus disease 2019. Simnotrelvir is a selective 3C-like protease inhibitor that can effectively inhibit severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). We evaluated the safety, tolerability, and pharmacokinetics of dose escalations of simnotrelvir alone or with ritonavir (simnotrelvir or simnotrelvir/ritonavir) in healthy subjects, as well as the food effect (ClinicalTrials.gov Identifier: NCT05339646). The overall incidence of adverse events (AEs) was 22.2% (17/72) and 6.3% (1/16) in intervention and placebo groups, respectively. The simnotrelvir apparent clearance was 135-369 L/h with simnotrelvir alone, and decreased significantly to 19.5-29.8 L/h with simnotrelvir/ritonavir. The simnotrelvir exposure increased in an approximately dose-proportional manner between 250 and 750 mg when co-administered with ritonavir. After consecutive twice daily dosing of simnotrelvir/ritonavir, simnotrelvir had a low accumulation index ranging from 1.39 to 1.51. The area under the curve of simnotrelvir increased 44.0 % and 47.3 % respectively, after high fat and normal diet compared with fasted status. In conclusion, simnotrelvir has adequate safety and tolerability. Its pharmacokinetics indicated a trough concentration above the level required for 90 % inhibition of SARS-CoV-2 in vitro at 750 mg/100 mg simnotrelvir/ritonavir twice daily under fasted condition, supporting further development using this dosage as the clinically recommended dose regimen.

A Dual-Responsive Liquid Crystal Elastomer for Multi-Level Encryption and Transient Information Display.

Information security has gained increasing attention in the past decade, leading to the development of advanced materials for anti-counterfeiting, encryption and instantaneous information display. However, it remains challenging to achieve high information security with simple encryption procedures and low-energy stimuli. Herein, a series of strain/temperature-responsive liquid crystal elastomers (LCEs) are developed to achieve dual-modal, multi-level information encryption and real-time, rewritable transient information display. The as-prepared polydomain LCEs can change from an opaque state to a transparent state under strain or temperature stimuli, with the transition strains or temperatures highly dependent on the concentration of long-chain flexible spacers. Information encrypted by different LCE inks can be decrypted under specific strains or temperatures, leading to multi-level protection of information security. Furthermore, with the combination of the phase transition of polydomain LCEs and the photothermal effect of multi-walled carbon nanotubes (MWCNTs), we achieved a repeatable transient information display by using near-infrared (NIR) light as a pen for writing. This study provides new insight into the development of advanced encryption materials with versatility and high security for broad applications.

Ferroptosis of macrophages facilitates bone loss in apical periodontitis via NRF2/FSP1/ROS pathway.

Apical periodontitis (AP) is an infectious disease that causes periapical tissue inflammation and bone destruction. Ferroptosis, a novel type of regulated cell death, is closely associated with inflammatory diseases and the regulation of bone homeostasis. However, the exact involvement of ferroptosis in the bone loss of AP is not fully understood. In this study, human periapical tissues were collected, and a mouse model was established to investigate the role of ferroptosis in AP. Colocalization staining revealed that ferroptosis in macrophages contributes to the inflammatory bone loss associated with AP. A cell model was constructed using RAW 264.7 cells stimulated with LPS to further explore the mechanism underlying ferroptosis in macrophages upon inflammatory conditions, which exhibited ferroptotic characteristics. Moreover, downregulation of NRF2 was observed in ferroptotic macrophages, while overexpression of NRF2 upregulated the level of FSP1, leading to a reduction in reactive oxygen species (ROS) in macrophages. Additionally, ferroptotic macrophages released TNF-α, which activated the p38 MAPK signaling pathway and further increased ROS accumulation in macrophages. In vitro co-culture experiments demonstrated that the osteogenic ability of mouse bone marrow stromal cells (BMSCs) was suppressed with the stimulation of TNF-α from ferroptotic macrophages. These findings suggest that the TNF-α autocrine-paracrine loop in ferroptotic macrophages can inhibit osteogenesis in BMSCs through the NRF2/FSP1/ROS signaling pathway, leading to bone loss in AP. This study highlights the potential therapeutic value of targeting ferroptosis in the treatment of inflammatory bone diseases.

A Photo- and Thermo-Driven Azoarene-Based Circularly Polarized Luminescence Molecular Switch in a Liquid Crystal Host.

The development of chiral optical active materials with switchable circularly polarized luminescence (CPL) signals remains a challenge. Here an azoarene-based circularly polarized luminescence molecular switch, (S, R, S)-switch 1 and (R, R, R)-switch 2, are designed and prepared with an (R)-binaphthyl azo group as a chiral photosensitive moiety and two (S)- or (R)-binaphthyl fluorescent molecules with opposite or the same handedness as chiral fluorescent moieties. Both switches exhibit reversible trans/cis isomerization when irradiated by 365 nm UV light and 520 nm green light in solvent and liquid crystal (LC) media. In contrast with the control (R, R, R)-switch 2, when switch 1 is doped into nematic LCs, polarization inversion and switching-off of the CPL signals are achieved in the resultant helical superstructure upon irradiation with 365 nm UV and 520 nm green light, respectively. Meanwhile, the fluorescence intensity of the system is basically unchanged during this switching process. In particular, these variations of the CPL signals could be recovered after heating, realizing the true sense of CPL reversible switching. Taking advantage of the unique CPL switching, the proof-of-concept for "a dual-optical information encryption system" based on the above CPL active material is demonstrated.

A transcriptomic evaluation of the mechanism of programmed cell death of the replaceable bud in Chinese chestnut.

Previous studies suggest that the senescence and death of the replaceable bud of the Chinese chestnut cultivar (cv.) "Tima Zhenzhu" involves programmed cell death (PCD). However, the molecular network regulating replaceable bud PCD is poorly characterized. Here, we performed transcriptomic profiling on the chestnut cv. "Tima Zhenzhu" replaceable bud before (S20), during (S25), and after (S30) PCD to unravel the molecular mechanism underlying the PCD process. A total of 5,779, 9,867, and 2,674 differentially expressed genes (DEGs) were discovered upon comparison of S20 vs S25, S20 vs S30, and S25 vs S30, respectively. Approximately 6,137 DEGs common to at least two comparisons were selected for gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analyses to interrogate the main corresponding biological functions and pathways. GO analysis showed that these common DEGs could be divided into three functional categories, including 15 cellular components, 14 molecular functions, and 19 biological processes. KEGG analysis found that "plant hormone signal transduction" included 93 DEGs. Overall, 441 DEGs were identified as related to the process of PCD. Most of these were found to be genes associated with ethylene signaling, as well as the initiation and execution of various PCD processes.

Adaptations for gas exchange enabled the elongation of lepidopteran proboscises.

The extensive biodiversification of butterflies and moths (Lepidoptera) is partly attributed to their unique mouthparts (proboscis [Pr]) that can span in length from less than 1 mm to over 280 mm in Darwin's sphinx moths. Lepidoptera, similar to other insects, are believed to inhale and exhale respiratory gases only through valve-like spiracles on their thorax and abdomen, making gas exchange through the narrow tracheae (Tr) challenging for the elongated Pr. How Lepidoptera overcome distance effects for gas transport to the Pr is an open question that is important to understanding how the Pr elongated over evolutionary time. Here, we show with scanning electron microscopy and X-ray imaging that distance effects on gas exchange are overcome by previously unreported micropores on the Pr surface and by superhydrophobic Tr that prevent water loss and entry. We find that the density of micropores decreases monotonically along the Pr length with the maxima proportional to the Pr length and that micropore diameters produce a Knudsen number at the boundary between the slip and transition flow regimes. By numerical estimation, we further show that the respiratory gas exchange for the Pr predominantly occurs via diffusion through the micropores. These adaptations are key innovations vital to Pr elongation, which likely facilitated lepidopteran biodiversification and the radiation of angiosperms by coevolutionary processes.

Modification of Iron-Rich Phase in Al-7Si-3Fe Alloy by Mechanical Vibration during Solidification.

The plate-like iron-rich intermetallic phases in recycled aluminum alloys significantly deteriorate the mechanical properties. In this paper, the effects of mechanical vibration on the microstructure and properties of the Al-7Si-3Fe alloy were systematically investigated. Simultaneously, the modification mechanism of the iron-rich phase was also discussed. The results indicated that the mechanical vibration was effective in refining the α-Al phase and modifying the iron-rich phase during solidification. The forcing convection and a high heat transfer inside the melt to the mold interface caused by mechanical vibration inhibited the quasi-peritectic reaction: L + α-Al8Fe2Si → (Al) + ß-Al5FeSi and eutectic reaction: L → (Al) + ß-Al5FeSi + Si. Thus, the plate-like ß-Al5FeSi phases in traditional gravity-casting were replaced by the polygonal bulk-like α-Al8Fe2Si. As a result, the ultimate tensile strength and elongation were increased to 220 MPa and 2.6%, respectively.

Do environmental target constraints of local government affect high-quality economic development? Evidence from China.

The purpose of this paper seeks to investigate the impact that environmental target constraints imposed by local governments have on the quality of economic development. In this paper, the city-level economic high-quality development index was measured, and data on environmental target constraints were compiled from the governmental work reports submitted by 230 cities between the years 2004 and 2013. Using the DID model and the instrumental variable method, it is found that (1) when environmental performance is factored into the performance evaluation of governmental officials, environmental target constraints contribute significantly to the high-quality growth of the local economy and (2) environmental target constraints are heterogeneous across regions and have a greater promoting effect on cities in eastern China than in central and western China. These conclusions are supported by a number of robustness tests. Resultantly, this paper provides a novel perspective for understanding the relationship between environmental protection and the quality of economic development. In addition, it offers the government theoretical and empirical support to strengthen the development of an environmental protection system and promote high-quality economic development. Moreover, this study delivers crucial empirical evidence for developing countries to simultaneously achieve environmental pollution control and economic growth.