Superabsorbent starch protective layer modulates zinc anode interface for long-life aqueous zinc ion batteries.

Aqueous zinc ion batteries (AZIBs) have attracted much attention for their safety, low cost and high theoretical capacity. Nevertheless, Zn dendrites and the adverse reactions such as corrosion, hydrogen evolution and passivation on the anode affect the cycle life and stability of AZIBs. Herein, superabsorbent starch (SS) was employed on Zn foil to form an artificial interface protection layer, which inhibited the formation of dendrites by guiding the uniform deposition of Zn2+. SS with a large amount of oxygen-containing functional group is superabsorbent, which can attract the active water around the hydrated Zn2+, promoting the desolvation process of the hydrated Zn2+ and significantly inhibiting the occurrence of hydrogen evolution reaction. In addition, the inherent pore structure of the SS artificial interfacial layer can induce uniform nucleation of Zn2+ and inhibit the dendrites growth. Moreover, compared to bare Zn//MnO2 cell (44.1 %), the capacity retention of Zn@SS//MnO2 cell remained as high as 87.8 % after 1000 cycles at 1.5 A g-1. The simple method provided a new method for the rapid development of AZIBs.

Prognostic implications of obstructive sleep apnea in patients with unstable angina stratified by remnant cholesterol and triglyceride: a prospective cohort study.

BACKGROUND: The prognostic significance of obstructive sleep apnea (OSA) in patients with unstable angina (UA) based on remnant cholesterol (RC) or triglyceride (TG) levels remains unclear. This study aims to evaluate the effects of the interaction between RC, TG, and OSA on cardiovascular outcomes in UA patients. METHODS: In this prospective cohort study, OSA was diagnosed when apnea-hypopnea index of ≥ 15 events/h. Patients with high RC (HRC, n = 370) or high TG (HTG, n = 362) included RC or TG in the highest tertile, and those in the middle and lowest tertiles were defined as normal RC (NRC, n = 736) or normal TG (NTG, n = 744). The primary endpoint was major adverse cardiovascular and cerebrovascular events (MACCE), including cardiovascular death, myocardial infarction, ischemia stroke, ischemia-driven revascularization, or hospitalization for UA. RESULTS: A total of 1,106 eligible UA patients were enrolled, among which 560 (50.6%) had OSA. RC and TG levels were increased in OSA patients, but there was no difference in the prevalence of OSA between the NRC and HRC or NTG and HTG groups. During a median follow-up of 1.9 (1.1, 3.0) years, OSA was associated with an increased risk of MACCE occurrence compared to non-OSA in UA patients with HRC (adjusted HR 2.06; 95% CI 1.20-3.51, P = 0.008), but not in those with NRC (adjusted HR 1.21; 95% CI 0.84-1.75, P = 0.297). The incremental risk in HRC was attributable to higher rates of hospitalization for UA and ischemia-driven revascularization. Results for HTG and NTG were similar. CONCLUSION: OSA was associated with a worse prognosis in UA patients with HRC or HTG, emphasizing the necessity of identifying OSA presence in this population. TRIAL REGISTRATION: Clinicaltrials.gov; No: NCT03362385.

The long-term prognostic implications of free triiodothyronine to free thyroxine ratio in patients with obstructive sleep apnea and acute coronary syndrome.

Objective: Obstructive sleep apnea (OSA) and thyroid dysfunction frequently overlap clinically and are risk factors for cardiovascular disease. The free triiodothyronine to free thyroxine (FT3/FT4) ratio as a novel biomarker of cardiovascular disease prognosis, but the impact of the FT3/FT4 ratio on the prognosis of OSA in patients with acute coronary syndromes (ACS) remains uncertain. Methods: In this prospective cohort study, 2160 patients with ACS were recruited and underwent portable sleep monitoring at Beijing Anzhen Hospital from June 2015 to January 2020. OSA was diagnosed when apnea-hypopnea index of ≥15 events/h. Patients were further divided into tertiles according to FT3/FT4 ratio. All patients had scheduled follow-up visits at 1, 3, 6, 9 and 12 months after discharge, with subsequent outpatient visits or telephone follow-up visits every 6 months. The primary endpoint was major adverse cardiovascular and cerebrovascular events (MACCE), including cardiovascular death, myocardial infarction (MI), stroke, ischemia-driven revascularization, or hospitalization for unstable angina or heart failure. Results: Among 1,547 euthyroid patients enrolled (mean age, 56.0 ± 10.5 years), 812 patients (52.5%) had OSA. The FT3/FT4 ratio between OSA and non-OSA patients was not significantly different. During 2.8 (1.4, 3.5) years follow up, the risk of MACCE increased with the decreasing FT3/FT4 tertiles in patients with OSA (tertile3 as reference, tertile2: hazard ratio (HR) 1.26, 95% CI: 0.85-1.86, P = 0.255; tertile1: 1.60, 95% CI 1.11-2.32; P = 0.013). After adjustment for confounders, the lowest FT3/FT4 tertile was still independently associated with an increased risk of MACCE (adjusted HR 1.66, 95% CI 1.11-2.50, P = 0.015). Conclusion: Lower FT3/FT4 ratio associated with poor prognosis in patients with ACS and OSA.

Zero-power infrared switch with two-phase microfluidic flow and a 2D material thermal isolation layer.

Wireless sensor nodes (WSNs) play an important role in many fields, including environmental monitoring. However, unattended WSNs face challenges in consuming power continuously even in the absence of useful information, which makes energy supply the bottleneck of WSNs. Here, we realized zero-power infrared switches, which consist of a metasurface and two-phase microfluidic flow. The metasurface can recognize the infrared signal from the target and convert it into heat, which triggers the two-phase microfluidic flow switch. As the target is not present, the switch is turned off. The graphene/MoS2/graphene 2D material heterostructure (thickness <2 nm) demonstrates an exceptionally high thermal resistance of 4.2 K/W due to strong phonon scattering and reduces the heat flow from the metasurface to the supporting substrate, significantly increasing the device sensitivity (the displacement of the two-phase microfluidic flow increases from ~1500 to ~3000 µm). The infrared switch with a pair of symmetric two-phase microfluidic flows can avoid spurious triggering resulting from environmental temperature changes. We realized WSNs with near-zero standby power consumption by integrating the infrared switch, sensors, and wireless communication module. When the target infrared signal appears, the WSNs are woken and show superb visual/auditory sensing performance. This work provides a novel approach for greatly lengthening the lifespan of unattended WSNs.

Preliminary study on the effect of lumbar axial rotation on bone mineral density measured by DXA and QCT.

Currently, the relationship between axial rotation of the vertebrae and bone mineral density (BMD) measured by dual-energy X-ray absorptiometry (DXA) and quantitative computed tomography (QCT) remains controversial. The aim of this study is to quantitatively assess the effect of vertebral rotation on volumetric bone mineral density (v-BMD) and areal bone mineral density (a-BMD), further to propose the corrected strategies. To achieve this, a phantom, which was rotated from 0° to 25° in 5° increments, was utilized. Bone mineral content (BMC), a-BMD, v-BMD, and projected area (p-AREA) were measured. The Kruskal-Wallis non-parametric test or one-way ANOVA was used to examine the differences in variables between the different groups. The Pearson and Spearman correlation was used to test the relationships between quantitative parameters and rotated angles. Linear regression analysis was used to evaluate the relationship between angles and quantitative parameters. The findings indicate that, as the angle increased, a-BMD and v-BMD decreased (P < 0.001) , and the p-AREA increased (P < 0.001), but the BMC stays constant. The rotated angle was negative correlated (r = - 0.925, P < 0.001) with a-BMD and v-BMD (r = - 0.880, P < 0.001), positive (r = 0.930, P = < 0.001) correlated with p-AREA. The linear regression analysis showed that a-BMD = 0.808-0.01 × Angle and v-BMD = 151.808-1.588 × Angle. This study showed that, axial rotation might lead to a lower measured for a-BMD and v-BMD, it should be modified. This gives clinicians some insights into how to deal with osteoporosis in scoliosis patients. It's essential for clinicians to incorporate these findings into their diagnostic processes to prevent potential misdiagnosis and over-treatment of osteoporosis.

Lumbar osteopathic manipulative treatment can improve KOA symptoms: short-term efficacy observation and mechanism analysis.

Background: Manipulative treatment can effectively improve knee pain and function, but no previous studies have shown that lumbar osteopathic manipulative treatment can improve knee symptoms. To explore the influence of lumbar manipulation on KOA and analyze its principlerelationship between coronal position of lumbar spine and KOA. Methods: Patients were divided into OMT group and DT group according to treatment. WOMAC scores were compared between the two groups, and X-ray examinations before and after treatment were performed in OMT group to analyze the imaging changes. Results: Both OMT group and DT group showed significant improvement in WOMAC score after treatment, and the improvement in OMT group was better than that in DT group. After OMT treatment, cTMI(P = 0.034), mL-SOD (P < 0.001), mΔL-KOD (P = 0.001), LL (P = 0.036), and FTA(P = 0.026) were significantly changed. Conclusion: Compared with drug therapy, lumbar manipulation can better improve WOMAC scores in KOA patients. It relives symptoms by loosening muscles and correcting small joint disorders to improve local knee alignment.

Prognostic effect of obstructive sleep apnea in acute coronary syndrome patients with heart failure.

BACKGROUND AND OBJECTIVE: Acute coronary syndrome (ACS), heart failure (HF) and obstructive sleep apnea (OSA) often overlap and interact, the impact of OSA on ACS patients with HF remains unclear. The study sought to comprehensively evaluate the effects of the interaction between OSA and HF on long-term cardiovascular outcomes in ACS patients. METHODS: Between June 2015 and January 2020, patients hospitalized for ACS were prospectively enrolled and underwent portable sleep monitoring after clinically stabilization. OSA was defined as an apnea hypopnea index ≥15 events/h. HF was defined using medical records. The primary endpoint was major adverse cardiovascular and cerebrovascular event (MACCE), including death, myocardial infarction, stroke, ischemia-driven revascularization, and hospitalization for unstable angina. RESULTS: Among all 1927 included patients, 214 (11.1 %) had HF, and 1014 (52.6 %) had OSA. For 2.9 years (1.5, 3.6 years) follow-up, OSA was independently associated with the risk of MACCE in HF patients (adjusted hazard ratio [HR], 2.11; 95%CI, 1.16-3.84; P = 0.014), but not in those without HF (adjusted HR, 1.15; 95%CI, 0.92-1.45; P = 0.228). Further analysis showed OSA exerted more prognostic effect in HF patients with preserved eject fraction (adjusted HR, 2.45; 95 % CI, 1.11-5.41; P = 0.027) than those with reduced eject fraction (adjusted HR, 1.62; 95 % CI, 0.63-4.20; P = 0.319). CONCLUSIONS: In the settings of ACS, OSA was independently associated with poor prognosis in patients with concomitant HF especially those with persevered ejection fraction. Screening and treatment for OSA are highly recommended in ACS patients with HF. CLINICAL TRIAL REGISTRATION: URL: www.clinicaltrails.gov; Unique Identifier: NCT03362385.

Enhancing Lithium-Ion Battery Health Predictions by Hybrid-Grained Graph Modeling.

Predicting the health status of lithium-ion batteries is crucial for ensuring safety. The prediction process typically requires inputting multiple time series, which exhibit temporal dependencies. Existing methods for health status prediction fail to uncover both coarse-grained and fine-grained temporal dependencies between these series. Coarse-grained analysis often overlooks minor fluctuations in the data, while fine-grained analysis can be overly complex and prone to overfitting, negatively impacting the accuracy of battery health predictions. To address these issues, this study developed a Hybrid-grained Evolving Aware Graph (HEAG) model for enhanced prediction of lithium-ion battery health. In this approach, the Fine-grained Dependency Graph (FDG) helps us model the dependencies between different sequences at individual time points, and the Coarse-grained Dependency Graph (CDG) is used for capturing the patterns and magnitudes of changes across time series. The effectiveness of the proposed method was evaluated using two datasets. Experimental results demonstrate that our approach outperforms all baseline methods, and the efficacy of each component within the HEAG model is validated through the ablation study.

Structural characterization and screening of chemical markers of alkaloids in Aconiti lateralis radix Praeparata and its processed products by UHPLC/Q-TOF-MS/MS and GNPS combining multivariate statistical methods based on the clinic.

RATIONAL: Aconiti Lateralis Radix Praeparata (AC) is a traditional Chinese medicine with a long history of use. However, the current research on the material basis of AC and its processed products is still not comprehensive, especially the changes in lipo-diterpenoid alkaloids (LDAs) that can be hydrolyzed into diester-diterpenoid alkaloids in AC before and after processing. This study aimed to provide material basis guidance for the clinical use of AC and its processed products by comprehensively analyzing the changes in substances between AC and its processed products. METHODS: An ultra-high-performance liquid chromatography with quadrupole time-of-flight mass spectrometry (UHPLC/Q-TOF-MS/MS) approach was optimized to chemical profiling. The MS data were processed using molecular networking combined with the in-house library database to fast characterize the compounds. Multivariate statistical methods were adopted to determine the dissimilarities of components in AC and its processed products. RESULTS: A total of 310 compounds were tentatively identified from AC, including 109 potential new alkaloids, of which 98 were potential novel LPAs. A metabolomics approach was applied to find the characteristic marker components. As a result, 52 potential chemical markers were selected to distinguish the AC samples of different extraction methods and 42 potential chemical markers for differentiating between AC and its processed products were selected. CONCLUSION: The results indicate that UHPLC/Q-TOF-MS/MS and Global Natural Products Social Molecular Networking coupled with multivariate analysis strategies was a powerful tool to rapidly identify and screen the chemical markers of alkaloids between the AC samples and its processed products. These results also indicate that the toxicity of water extracts of AC and its processed products were decreased. This research not only guides the clinical safe use of AC and its processed products, but also extends the application of the molecular networking strategy in traditional herbal medicine.

Two new types of structures from soft coral-associated epiphytic fungus Aspergillus versicolor CGF9-1-2.

Global Natural Products Social (GNPS) molecular networking platform was applied to discovery the undescribed compounds from the common marine fungi Aspergillus versicolor CGF9-1-2, ultimately resulting in isolation of four new polyketides, decumbenone E (1), decumbenone F (2), 2'-epi-8-O-methylnidurufin (6), (-)-phomoindene A (7), one new nucleoside, 3-methyl-9-(2-methylbutene)-xanthine (8), and five known analogues. Their structures were elucidated based on 1D/2D NMR spectroscopic and HRESIMS data analyses, meanwhile, the absolute configurations of new compounds were established based on the X-ray crystallographic experiments, as well as the electronic circular dichroism (ECD) analysis. All compounds were predicted pharmaceutical chemistry with ten commonly disease-related proteins by molecular docking. In addition, all compounds against TDP1 were performed in vitro, which was consistent with the docking result, and compound 6 shown a weak inhibitory activity.

High-level HONO exacerbates double high pollution of O3 and PM2.5 in China.

Double high pollution (DHP) of ozone (O3) and fine particulate matter (PM2.5) has frequently been observed in China in recent years. Numerous studies have speculated that DHP might be related to nitrous acid (HONO), but the chemical mechanism involved remains unclear. Field observation results of DHP in Shanghai indicate that the high concentration of HONO produced by nitrogen dioxide (NO2) heterogeneous reactions under conditions of high temperature and high humidity promotes an increase in PM2.5 and O3 concentrations. The box model combined with field observations to reconstruct pollution events indicates that HONO photolysis generates abundant hydroxyl (OH) radicals that rapidly oxidize volatile organic compounds (VOCs), which in turn accelerates the ROx (OH, hydroperoxyl (HO2), and organic peroxy (RO2) radicals) cycle and causes the accumulation of O3. This elevated O3 along with high concentrations of HONO, produces particulate nitrate (pNO3) by encouraging the NO2 + OH reaction. This process strengthens the chemical coupling between O3 and PM2.5, which can exacerbate the DHP of O3 and PM2.5. Sensitivity analysis of pNO3/O3-NOx-VOCs suggests that under nitrogen oxides (NOx = NO + NO2) reduction conditions, simultaneous control of pNO3 and O3 can be expected to be successfully achieved through emission reduction of alkanes and oxygenated VOCs (OVOCs). Therefore, the present research will facilitate the design of appropriate PM2.5 and O3 control strategies for high HONO concentration conditions, and thus alleviate the current stresses of air pollution.

Automated weight-bearing foot measurements using an artificial intelligence-based software.

OBJECTIVE: To assess the accuracy of an artificial intelligence (AI) software (BoneMetrics, Gleamer) in performing automated measurements on weight-bearing forefoot and lateral foot radiographs. METHODS: Consecutive forefoot and lateral foot radiographs were retrospectively collected from three imaging institutions. Two senior musculoskeletal radiologists independently annotated key points to measure the hallux valgus, first-second metatarsal, and first-fifth metatarsal angles on forefoot radiographs and the talus-first metatarsal, medial arch, and calcaneus inclination angles on lateral foot radiographs. The ground truth was defined as the mean of their measurements. Statistical analysis included mean absolute error (MAE), bias assessed with Bland-Altman analysis between the ground truth and AI prediction, and intraclass coefficient (ICC) between the manual ratings. RESULTS: Eighty forefoot radiographs were included (53 ± 17 years, 50 women), and 26 were excluded. Ninety-seven lateral foot radiographs were included (51 ± 20 years, 46 women), and 21 were excluded. MAE for the hallux valgus, first-second metatarsal, and first-fifth metatarsal angles on forefoot radiographs were respectively 1.2° (95% CI [1; 1.4], bias = - 0.04°, ICC = 0.98), 0.7° (95% CI [0.6; 0.9], bias = - 0.19°, ICC = 0.91) and 0.9° (95% CI [0.7; 1.1], bias = 0.44°, ICC = 0.96). MAE for the talus-first, medial arch, and calcaneal inclination angles on the lateral foot radiographs were respectively 3.9° (95% CI [3.4; 4.5], bias = 0.61° ICC = 0.88), 1.5° (95% CI [1.2; 1.8], bias = - 0.18°, ICC = 0.95) and 1° (95% CI [0.8; 1.2], bias = 0.74°, ICC = 0.99). Bias and MAE between the ground truth and the AI prediction were low across all measurements. ICC between the two manual ratings was excellent, except for the talus-first metatarsal angle. CONCLUSION: AI demonstrated potential for accurate and automated measurements on weight-bearing forefoot and lateral foot radiographs.

Identification of O-Methyltransferases Potentially Contributing to the Structural Diversity of 2-(2-Phenylethyl)chromones in Agarwood.

2-(2-Phenylethyl)chromones (PECs) are the primary constituents responsible for the promising pharmacological activities and unique fragrance of agarwood. However, the O-methyltransferases (OMTs) involved in the formation of diverse methylated PECs have not been reported. In this study, we identified one Mg2+-dependent caffeoyl-CoA-OMT subfamily enzyme (AsOMT1) and three caffeic acid-OMT subfamily enzymes (AsOMT2-4) from NaCl-treated Aquilaria sinensis calli. AsOMT1 not only converts caffeoyl-CoA to feruloyl-CoA but also performs nonregioselective methylation at either the 6-OH or 7-OH position of 6,7-dihydroxy-PEC. On the other hand, AsOMT2-4 preferentially utilizes PECs as substrates to produce structurally diverse methylated PECs. Additionally, AsOMT2-4 also accepts nonPEC-type substrates such as caffeic acid and apigenin to generate methylated products. Protein structure prediction and site-directed mutagenesis revealed that residues of L313 and I318 in AsOMT3, as well as S292 and F313 in AsOMT4 determine the distinct regioselectivity of these two OMTs toward apigenin. These findings provide important biochemical evidence of the remarkable structural diversity of PECs in agarwood.

Phosphonic Chloride Assisted Fabrication of Highly Emissive Mixed Halide Perovskite Films in Ambient Air for Blue Light-Emitting Diodes.

Blue perovskite light-emitting diodes (LEDs) have emerged as promising candidates for full-color display and lighting applications. However, the fabrication of blue-emitting perovskite films typically requires an inert environment, leading to increased complexity and cost in the manufacturing process, which is undesirable for applications of perovskite LEDs. Herein, we report a strategy to fabricate bright blue-emitting perovskite films in ambient air by incorporating phosphonic chlorides in a perovskite precursor solution. We used two different phosphonic chlorides, diphenylphosphonic chloride (DPPC) and phenylphosphonic dichloride (PPDC), and comparatively studied their effects on the properties of perovskite films and the blue LEDs. It is found that PPDC possesses a stronger chlorination ability due to higher hydrolysis reactivity; meanwhile, it has a stronger interaction with the perovskite compared to DPPC, resulting in an improved film quality and enhanced blue emission with a photoluminescence quantum yield of 45%, which represents the record value for the air-processed blue perovskite films. Blue perovskite LEDs are fabricated, and the emission wavelengths are effectively tuned by controlling the concentration of phosphonic chlorides. Benefiting from the optimized perovskite films with reduced nonradiative recombination and promoted charge injection and transport, the PPDC-derived blue perovskite LEDs exhibit improved performance with an external quantum efficiency of 3.3% and 1.2% for the 490 and 480 nm emission wavelength, respectively.

Combined contamination of microplastic and antibiotic alters the composition of microbial community and metabolism in wheat and maize rhizosphere soil.

The widespread application of antibiotics and plastic films in agriculture has led to new characteristics of soil pollution. The impacts of combined contamination of microplastics and antibiotics on plant growth and rhizosphere soil bacterial community and metabolisms are still unclear. We conducted a pot experiment to investigate the effects of polyethylene (0.2%) and norfloxacin/doxycycline (5 mg kg-1), as well as the combination of polyethylene and antibiotics, on the growth, rhizosphere soil bacterial community and metabolisms of wheat and maize seedlings. The results showed that combined contamination caused more serious damage to plant growth than individual contamination, and aggravated root oxidative stress responses. The diversity and structure of soil bacterial community were not markedly altered, but the composition of the bacterial community, soil metabolisms and metabolic pathways were altered. The co-occurrence network analysis indicated that combined contamination may inhibit the growth of wheat and maize seedings by simplifying the interrelationships between soil bacteria and metabolites, and altering the relative abundance of specific bacteria genera (e.g. Kosakonia and Sphingomonas) and soil metabolites (including sugars, organic acids and amino acids). The results help to elucidate the potential mechanisms of phytotoxicity of the combination of microplastic and antibiotics.

26SCS-Loaded SilMA/Col Composite Sponge with Well-Arranged Layers Promotes Angiogenesis-Based Diabetic Wound Repair by Mediating Macrophage Inflammatory Response.

Diabetic wound healing is a significant clinical challenge because abnormal immune cells in the wound cause chronic inflammation and impair tissue regeneration. Therefore, regulating the behavior and function of macrophages may be conducive to improving treatment outcomes in diabetic wounds. Herein, sulfated chitosan (26SCS)-containing composite sponges (26SCS-SilMA/Col-330) with well-arranged layers and high porosity were constructed based on collagen and silk fibroin, aiming to induce an appropriate inflammatory response and promote angiogenesis. The results indicated that the ordered topological structure of composite sponges could trigger the pro-inflammatory response of Mφs in the early stage, and rapid release of 26SCS in the early and middle stages (within the concentration range of 1-3 mg/mL) induced a positive inflammatory response; initiated the pro-inflammatory reaction of Mφs within 3 days; shifted M1 Mφs to the M2 phenotype within 3-7 days; and significantly up-regulated the expression of two typical angiogenic growth factors, namely VEGF and PDGF-BB, on day 7, leading to rapid HUVEC migration and angiogenesis. In vivo data also demonstrated that on the 14th day after surgery, the 26SCS-SilMA/Col-330-implanted areas exhibited less inflammation, faster re-epithelialization, more abundant collagen deposition and a greater number of blood vessels in the skin tissue. The composite sponges with higher 26SCS contents (the (5.0) 26SCS-SilMA/Col-330 and the (7.5) 26SCS-SilMA/Col-330) could better orchestrate the phenotype and function of Mφs and facilitate wound healing. These findings highlight that the 26SCS-SilMA/Col-330 sponges developed in this work might have great potential as a novel dressing for the treatment of diabetic wounds.

Refractive index measurement deflectometry for measuring gradient refractive index lens.

A method based on deflectometry to measure the refractive index distribution of radial gradient refractive index (GRIN) lens is proposed in this paper. The method establishes the relationship between the refractive index distribution and the direction of light ray by deriving the propagation equation of light in a non-uniform medium. By measuring the deflection angle using the principle of deflectometry and the assumption of central refraction, the refractive index distribution of the radial GRIN lens is determined. The specific principle of refractive index measurement deflectometry (RIMD) is described in detail, and the correctness and accuracy of the method are verified through numerical simulations. Furthermore, the effects of calibration error, lens surface shape on the accuracy of the measurement results are analyzed. In the experimental section, the proposed method is applied to measure a radial GRIN lens, and the results are compared with the nominal parameters in terms of shape distribution and numerical values, demonstrating good consistency. The measurement error is controlled within the order of 10-3. This method enables rapid and convenient acquisition of full-field information of GRIN lens and holds promising potential for playing an important role in lens manufacturing and production.

Frequency-domain searching algorithm in deflectometry for measuring the surface of a transparent planar element.

This Letter presents the frequency-domain searching algorithm in deflectometry (FSAD). By encoding specialized multi-frequency fringe patterns and employing a correlation searching algorithm, the limitations of existing frequency-domain methods can be overcome to some extent, thereby separating front and back surface reflections to obtain complete measurement data. The principles of FSAD are described in detail. In the experiment, a piece of window glass with thickness of 10 mm and a square area of 96 × 96 mm is measured to verify the proposed method.

Penicilloneines A and B, Quinolone-Citrinin Hybrids from a Starfish-Derived Penicillium sp.

Penicilloneines A (1) and B (2) are the first reported quinolone-citrinin hybrids. They were isolated from the starfish-derived fungus Penicillium sp. GGF16-1-2, and their structures were elucidated using spectroscopic, chemical, computational, and single-crystal X-ray diffraction methods. Penicilloneines A (1) and B (2) share a common 4-hydroxy-1-methyl-2(1H)-quinolone unit; however, they differ in terms of citrinin moieties, and these two units are linked via a methylene bridge. Penicilloneines A (1) and B (2) exhibited antifungal activities against Colletotrichum gloeosporioides, with lethal concentration 50 values of 0.02 and 1.51 µg/mL, respectively. A mechanistic study revealed that 1 could inhibit cell growth and promote cell vacuolization and consequent disruption of the fungal cell walls via upregulating nutrient-related hydrolase genes, including putative hydrolase, acetylcholinesterase, glycosyl hydrolase, leucine aminopeptidase, lipase, and beta-galactosidase, and downregulating their synthase genes 3-carboxymuconate cyclase, pyruvate decarboxylase, phosphoketolase, and oxalate decarboxylase.

Flexible High-Temperature MoS2 Field-Effect Transistors and Logic Gates.

High-temperature-resistant integrated circuits with excellent flexibility, a high integration level (nanoscale transistors), and low power consumption are highly desired in many fields, including aerospace. Compared with conventional SiC high-temperature transistors, transistors based on two-dimensional (2D) MoS2 have advantages of superb flexibility, atomic scale, and ultralow power consumption. However, MoS2 cannot survive at high temperature and drastically degrades above 200 °C. Here, we report MoS2 field-effect transistors (FETs) with top/bottom hexagonal boron nitride (h-BN) encapsulation and graphene electrodes. With the protection of the h-BN/h-BN structure, the devices can survive at much higher temperature (≥500 °C in air) than those of the MoS2 devices ever reported, which provides us an opportunity to explore the electrical properties and working mechanism of MoS2 devices at high temperature. Unlike the relatively low-temperature situation, the on/off ratio and subthreshold swing of MoS2 FETs show drastic variation at elevated temperature due to the injection of thermal emission carriers. Compared with metal electrode, devices with a graphene electrode demonstrate superior performance at high temperature (∼1-order-larger current on/off ratio, 3-7 times smaller subthreshold swing, and 5-9 times smaller threshold voltage shift). We further realize that the flexible CMOS NOT gate based on the above technique, and demonstrate logic computing at 550 °C. This work may stimulate the fundamental research of properties of 2D materials at high temperature, and also creates conditions for next-generation flexible harsh-environment-resistant integrated circuits.