RESUMO
PURPOSE: The purpose of this study was to evaluate and compare the friction and abrasion of six kinds of dental materials that was widely used clinically. The mechanisms were investigated to provide experimental reference for selecting proper restorative material to protect opposite natural enamel of the patients. METHODS: In the experimental groups,pure Ti, Ti alloy, Au-Pd alloy, Ni-Cr alloy, AgHg alloy,ceramic were fabricated into thirty uniform 8.0mmx8.0mmx2.0mm block. Five specimens in each group.In the control group,five recently extracted mandibular third molar of adults were fabricated into 8.0mmx8.0mmx2.0mm block. Steatites were fabricated into discs in the diameter of 25mm and thickness of 2.0mm to act as counter sample materials. The mass loss of each specimen and the opposing steatite were weighted by electric balance. The volume loss of the materials and opposing steatites were analyzed by SPSS11.5 software package and the difference was compared between each group. RESULTS: The ranking of the volume loss of six materials and enamel from the most to the least was group A, group E, group C, group D, group B, group F and group G. Significant difference was found between group A and the other groups. No significance was found between group G and F. The coefficient of friction of group A-G was 0.68, 0.12, 0.11, 0.41, 0.38, 0.48 and 0.65,respectively. CONCLUSION: The six materials in this study were less resistant to wear than natural tooth. The wear of pure Ti, AgHg alloy and Ni-Cr alloy are to enamel.