A Ti3C2Tx-Based Composite as Separator Coating for Stable Li-S Batteries.

The nitrogen-doped MXene carbon nanosheet-nickel (N-M@CNi) powder was successfully prepared by a combined process of electrostatic attraction and annealing strategy, and then applied as the separator coating in lithium-sulfur batteries. The morphology and structure of the N-M@CNi were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectrum, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption-desorption method. The strong LiPS adsorption ability and high conductivity are associated with the N-doped carbon nanosheet-Ni modified surface. The modified separator offers the cathode of Li-S cell with greater sulfur utilization, better high-rate adaptability, and more stable cycling performance compared with the pristine separator. At 0.2 C the cell with N-M@CNi separator delivers an initial capacity of 1309 mAh g-1. More importantly, the N-M@CNi separator is able to handle a cathode with 3.18 mg cm-2 sulfur loading, delivering a capacity decay rate of 0.043% with a high capacity retention of 95.8%. Therefore, this work may provide a feasible approach to separator modification materials towards improved Li-S cells with improved stability.

Electrochemical gating for single-molecule electronics with hybrid Au|graphene contacts.

The single-molecular conductance of a redox active viologen molecular bridge between Au|graphene electrodes has been studied in an electrochemical gating configuration in an ionic liquid medium. A clear "off-on-off" conductance switching behaviour has been achieved through gating of the redox state when the electrochemical potential is swept. The Au|viologen|graphene junctions show single-molecule conductance maxima centred close to the equilibrium redox potentials for both reduction steps. The peak conductance of Au|viologen|graphene junctions during the first reduction is significantly higher than that of previously measured Au|viologen|Au junctions. This shows that even though the central viologen moiety is not directly linked to the enclosing electrodes, substituting one gold contact for a graphene one nevertheless has a significant impact on junction conductance values. The experimental data was compared against two theoretical models, namely a phase coherent tunnelling and an incoherent "hopping" model. The former is a simple gating monoelectronic model within density functional theory (DFT) which discloses the charge state evolution of the molecule with electrode potential. The latter model is the collective Kuznetsov Ulstrup model for 2-step sequential charge transport through the redox centre in the adiabatic limit. The comparison of both models to the experimental data is discussed for the first time. This work opens perspectives for graphene-based molecular transistors with more effective gating and fundamental understanding of electrochemical electron transfer at the single molecular level.

An Integrated Self-Powered Real-Time Pedometer System with Ultrafast Response and High Accuracy.

As accurate step counting is a critical indicator for exercise evaluation in daily life, pedometers give a quantitative prediction of steps and analyze the amount of exercise to regulate the exercise plan. However, the merchandized pedometers still suffer from limited battery life and low accuracy. In this work, an integrated self-powered real-time pedometer system has been demonstrated. The highly integrated system contains a porous triboelectric nanogenerator (P-TENG), a data acquisition and processing (DAQP) module, and a mobile phone APP. The P-TENG works as a pressure sensor that generates electrical signals synchronized with users' footsteps, and combining it with the analogue front-end (AFE) circuit yields an ultrafast response time of 8 ms. Moreover, the combination of a mini press-to-spin-type electromagnetic generator (EMG) and a supercapacitor enables a self-powered and self-sustained operation of the entire pedometer system. This work implements the regulation of TENG signals by electronic circuit design and proposes a highly integrated system. The improved reliability and practicality provide more possibilities for wearable self-powered electronic devices.

High-Performance and Radiation-Hardened Solution-Processed ZrLaO Gate Dielectrics for Large-Area Applications.

Radiation hardness is important for electronics operating in harsh radiation environments such as outer space and nuclear energy industries. In this work, radiation-hardened solution-processed ZrLaO thin films are demonstrated. The radiation effects on solution-processed ZrLaO thin films and InOx/ZrLaO thin-film transistors (TFTs) were systemically investigated. The Zr0.9La0.1Oy thin films demonstrated excellent radiation hardness with negligible roughness, composition, electrical property, and bias-stress stability degradation after radiation exposure. The metal-oxide-semiconductor capacitors (MOSCAPs) based on Zr0.9La0.1Oy gate dielectrics exhibited an ultralow flat band-voltage (VFB) sensitivity of 0.11 mV/krad and 0.19 mV/krad under low dose and high dose gamma irradiation conditions, respectively. The low dose condition had a 103 krad (SiO2) total dose and a 0.12 rad/s low dose rate, whereas the high dose condition had a 580 krad total dose and a 278 rad/s high dose rate. Furthermore, InOx/Zr0.9La0.1Oy thin-film transistors (TFTs) exhibited a large Ion/Ioff of 2 × 106, a small subthreshold swing (SS) of 0.11 V/dec, a small interface trap density (Dit) of 1 × 1012 cm-2, and a 0.16 V threshold shift (ΔVTH) under 3600 s positive bias-stress (PBS). InOx/Zr0.9La0.1Oy TFT-based resistor-loaded inverters demonstrated complete swing behavior, a static output gain of 13.3 under 4 V VDD, and an ∼9% radiation-induced degradation. Through separate investigation of the radiation-induced degradation on the semiconductor layer and dielectric layer of TFTs, it was found that radiation exposure mainly generated oxygen vacancies (Vo) and increased electron concentration among gate oxide. Nevertheless, the radiation-induced TFT instability was mainly related to the semiconductor layer degradation, which could be possibly suppressed by back-channel passivation. The demonstrated results indicate that solution-processed ZrLaO is a high-potential candidate for large-area electronics and circuits applied in harsh radiation environments. In addition, the detailed investigation of radiation-induced degradation on solution-processed high-k dielectrics in this work provided clear inspiration for developing novel flexible rad-hard dielectrics.

Oligothiophene molecular wires at graphene-based molecular junctions.

The use of graphene as a new type of electrode at molecular junctions has led to a renewal of molecular electronics. Indeed, the symmetry breaking induced by the graphene electrode yields different electronic behaviors at the molecular junction and in particular enhanced conductance for longer molecules. In this respect, several studies involving different molecular backbones and anchoring groups have been performed. Here in the same line, we consider oligopthiophene based hybrid gold-graphene junctions and we measure their electrical properties using the STM-I(s) method in order to determine their attenuation factor and the effect of specific anchoring groups. The results are supported by density functional theory (DFT) calculations, and exhibit a similar behavior to what is observed at alkane-based junctions.

Nitrogen-Doped Hierarchical Porous Activated Carbon Derived from Paddy for High-Performance Supercapacitors.

A facile and environmentally friendly fabrication is proposed to prepare nitrogen-doped hierarchical porous activated carbon via normal-pressure popping, one-pot activation and nitrogen-doping process. The method adopts paddy as carbon precursor, KHCO3 and dicyandiamide as the safe activating agent and nitrogen dopant. The as-prepared activated carbon presents a large specific surface area of 3025 m2·g-1 resulting from the synergistic effect of KHCO3 and dicyandiamide. As an electrode material, it shows a maximum specific capacitance of 417 F·g-1 at a current density of 1 A·g-1 and very good rate performance. Furthermore, the assembled symmetric supercapacitor presents a large specific capacitance of 314.6 F·g-1 and a high energy density of 15.7 Wh·Kg-1 at 1 A·g-1, maintaining 14.4 Wh·Kg-1 even at 20 A·g-1 with the energy density retention of 91.7%. This research demonstrates that nitrogen-doped hierarchical porous activated carbon derived from paddy has a significant potential for developing a high-performance renewable supercapacitor and provides a new route for economical and large-scale production in supercapacitor application.

Advances of RRAM Devices: Resistive Switching Mechanisms, Materials and Bionic Synaptic Application.

Resistive random access memory (RRAM) devices are receiving increasing extensive attention due to their enhanced properties such as fast operation speed, simple device structure, low power consumption, good scalability potential and so on, and are currently considered to be one of the next-generation alternatives to traditional memory. In this review, an overview of RRAM devices is demonstrated in terms of thin film materials investigation on electrode and function layer, switching mechanisms and artificial intelligence applications. Compared with the well-developed application of inorganic thin film materials (oxides, solid electrolyte and two-dimensional (2D) materials) in RRAM devices, organic thin film materials (biological and polymer materials) application is considered to be the candidate with significant potential. The performance of RRAM devices is closely related to the investigation of switching mechanisms in this review, including thermal-chemical mechanism (TCM), valance change mechanism (VCM) and electrochemical metallization (ECM). Finally, the bionic synaptic application of RRAM devices is under intensive consideration, its main characteristics such as potentiation/depression response, short-/long-term plasticity (STP/LTP), transition from short-term memory to long-term memory (STM to LTM) and spike-time-dependent plasticity (STDP) reveal the great potential of RRAM devices in the field of neuromorphic application.

Charge transport in hybrid platinum/molecule/graphene single molecule junctions.

The single molecule conductance of hybrid platinum/alkanedithiol/graphene junctions has been investigated with a focus on understanding the influence of employing two very different contact types. We call this an "anti-symmetric" configuration, with the two different contacts here being platinum and graphene, which respectively provide very different electronic coupling to the alkanedithiol bridge. The conductance of these junctions is experimentally investigated by using a non-contact scanning tunneling microscopy (STM) based method called the I(s) technique. These experimental determinations are supported by density functional theory (DFT) calculations. These alkanedithiol bridging molecules conduct electric current through the highest occupied molecular orbital (HOMO), and junctions formed with Pt/graphene electrode pairs are slightly more conductive than those formed with Au/graphene electrodes which we previously investigated. This is consistent with the lower work function of gold than that of platinum. The measured conductance decays exponentially with the length of the molecular bridge with a low tunneling decay constant, which has a similar value for Pt/graphene and Au/graphene electrode pairs, respectively. These new results underline the importance of the coupling asymmetry between the two electrodes, more than the type of the metal electrode itself. Importantly, the tunneling decay constant is much lower than that of alkanedithiols with the symmetrical equivalent, i.e. identical metal electrodes. We attribute this difference to the relatively weak van der Waals coupling at the graphene interface and the strong bond dipole at the Pt-S interface, resulting in a decrease in the potential barrier at the interface.

Memristive Non-Volatile Memory Based on Graphene Materials.

Resistive random access memory (RRAM), which is considered as one of the most promising next-generation non-volatile memory (NVM) devices and a representative of memristor technologies, demonstrated great potential in acting as an artificial synapse in the industry of neuromorphic systems and artificial intelligence (AI), due its advantages such as fast operation speed, low power consumption, and high device density. Graphene and related materials (GRMs), especially graphene oxide (GO), acting as active materials for RRAM devices, are considered as a promising alternative to other materials including metal oxides and perovskite materials. Herein, an overview of GRM-based RRAM devices is provided, with discussion about the properties of GRMs, main operation mechanisms for resistive switching (RS) behavior, figure of merit (FoM) summary, and prospect extension of GRM-based RRAM devices. With excellent physical and chemical advantages like intrinsic Young's modulus (1.0 TPa), good tensile strength (130 GPa), excellent carrier mobility (2.0 × 105 cm2∙V-1∙s-1), and high thermal (5000 Wm-1∙K-1) and superior electrical conductivity (1.0 × 106 S∙m-1), GRMs can act as electrodes and resistive switching media in RRAM devices. In addition, the GRM-based interface between electrode and dielectric can have an effect on atomic diffusion limitation in dielectric and surface effect suppression. Immense amounts of concrete research indicate that GRMs might play a significant role in promoting the large-scale commercialization possibility of RRAM devices.

A Novel GaN Metal-Insulator-Semiconductor High Electron Mobility Transistor Featuring Vertical Gate Structure.

A novel structure scheme by transposing the gate channel orientation from a long horizontal one to a short vertical one is proposed and verified by technology computer-aided design (TCAD) simulations to achieve GaN-based normally-off high electron mobility transistors (HEMTs) with reduced on-resistance and improved threshold voltage. The proposed devices exhibit high threshold voltage of 3.1 V, high peak transconductance of 213 mS, and much lower on-resistance of 0.53 mΩ·cm2 while displaying better off-state characteristics owing to more uniform electric field distribution around the recessed gate edge in comparison to the conventional lateral HEMTs. The proposed scheme provides a new technical approach to realize high-performance normally-off HEMTs.

Effect of Annealing Temperature for Ni/AlOx/Pt RRAM Devices Fabricated with Solution-Based Dielectric.

Resistive random access memory (RRAM) devices with Ni/AlOx/Pt-structure were manufactured by deposition of a solution-based aluminum oxide (AlOx) dielectric layer which was subsequently annealed at temperatures from 200 °C to 300 °C, in increments of 25 °C. The devices displayed typical bipolar resistive switching characteristics. Investigations were carried out on the effect of different annealing temperatures for associated RRAM devices to show that performance was correlated with changes of hydroxyl group concentration in the AlOx thin films. The annealing temperature of 250 °C was found to be optimal for the dielectric layer, exhibiting superior performance of the RRAM devices with the lowest operation voltage (<1.5 V), the highest ON/OFF ratio (>104), the narrowest resistance distribution, the longest retention time (>104 s) and the most endurance cycles (>150).

Effect of Asymmetric Anchoring Groups on Electronic Transport in Hybrid Metal/Molecule/Graphene Single Molecule Junctions.

A combined experimental and theoretical study on molecular junctions with asymmetry in both the electrode type and in the anchoring group type is presented. A scanning tunnelling microscope is used to create the "asymmetric" Au-S-(CH2 )n-COOH-graphene molecular junctions and determine their conductance. The measurements are combined with electron transport calculations based on density functional theory (DFT) to analyze the electrical conductance and its length attenuation factor from a series of junctions of different molecular length (n). These results show an unexpected trend with a rather high conductance and a smaller attenuation factor for the Au-S-(CH2 )n -COOH-graphene configuration compared to the equivalent junction with the "symmetrical" COOH contacting using the HOOC-(CH2 )n -COOH series. Owing to the effect of the graphene electrode, the attenuation factor is also smaller than the one obtained for Au/Au electrodes. These results are interpreted through the relative molecule/electrode couplings and molecular level alignments as determined with DFT calculations. In an asymmetric junction, the electrical current flows through the less resistive conductance channel, similarly to what is observed in the macroscopic regime.

Carbon-contacted single molecule electrical junctions.

A fully metal-free molecular junction (MJ) has been built by using an electrochemically etched carbon fibre STM tip as the top electrode and graphene as the bottom electrode. The corresponding conductance values for 1,n-alkanediamine and 1,n-alkanedithiol (n = 2, 4, 6, 8 and 10) have been measured using the STM-I(s) technique. The tunnelling decay constant of the alkanediamine and alkanedithiol junctions with these carbon contacts is much lower than the corresponding metal contacted junctions of 0.24 and 0.38 per -CH2 unit, but the junction conductance with these carbon contacts is also lower. The carbon fibre tip can be considered a good candidate as an electrode. Compared with a gold tip, the carbon fibre tip leads to correspondingly lower molecular junction conductance.

Fast and straightforward analysis approach of charge transport data in single molecule junctions.

In this study, we introduce an efficient data sorting algorithm, including filters for noisy signals, conductance mapping for analyzing the most dominant conductance group and sub-population groups. The capacity of our data analysis process has also been corroborated on real experimental data sets of Au-1,6-hexanedithiol-Au and Au-1,8-octanedithiol-Au molecular junctions. The fully automated and unsupervised program requires less than one minute on a standard PC to sort the data and generate histograms. The resulting one-dimensional and two-dimensional log histograms give conductance values in good agreement with previous studies. Our algorithm is a straightforward, fast and user-friendly tool for single molecule charge transport data analysis. We also analyze the data in a form of a conductance map which can offer evidence for diversity in molecular conductance. The code for automatic data analysis is openly available, well-documented and ready to use, thereby offering a useful new tool for single molecule electronics.

Symmetry Effects on Attenuation Factors in Graphene-Based Molecular Junctions.

The unique structural and electronic characteristics of graphene make it an attractive contact for fundamental single-molecule electrical studies. With this in mind, we have probed here the electrical conductance of a molecular junction based on α,ω-diaminoalkane chains sandwiched between a gold and a graphene electrode. Using an STM based I(s) method combined with density functional theory-based transport calculations, we demonstrate that the resulting attenuation factor turns out to be much lower when compared to the standard molecular junction between two gold electrodes. This effect is attributed to asymmetric coupling of the molecule through strong chemisorption at the gold electrode and weaker van der Waals contact at graphene. Moreover, this asymmetric coupling induces higher conductance than that in the same hybrid metal-graphene molecular junction using standard thiol anchoring groups.

Graphene as a Promising Electrode for Low-Current Attenuation in Nonsymmetric Molecular Junctions.

We have measured the single-molecule conductance of 1,n-alkanedithiol molecular bridges (n = 4, 6, 8, 10, 12) on a graphene substrate using scanning tunneling microscopy (STM)-formed electrical junctions. The conductance values of this homologous series ranged from 2.3 nS (n = 12) to 53 nS (n = 4), with a decay constant ßn of 0.40 per methylene (-CH2) group. This result is explained by a combination of density functional theory (DFT) and Keldysh-Green function calculations. The obtained decay, which is much lower than the one obtained for symmetric gold junctions, is related to the weak coupling at the molecule-graphene interface and the electronic structure of graphene. As a consequence, we show that using graphene nonsymmetric junctions and appropriate anchoring groups may lead to a much-lower decay constant and more-conductive molecular junctions at longer lengths.

Charge transport through dicarboxylic-acid-terminated alkanes bound to graphene-gold nanogap electrodes.

Graphene-based electrodes are attractive for single-molecule electronics due to their high stability and conductivity and reduced screening compared with metals. In this paper, we use the STM-based matrix isolation I(s) method to measure the performance of graphene in single-molecule junctions with one graphene electrode and one gold electrode. By measuring the length dependence of the electrical conductance of dicarboxylic-acid-terminated alkanes, we find that the transport is consistent with phase-coherent tunneling, but with an attenuation factor of ßN = 0.69 per methyl unit, which is lower than the value measured for Au-molecule-Au junctions. Comparison with density-functional-theory calculations of electron transport through graphene-molecule-Au junctions and Au-molecule-Au junctions reveals that this difference is due to the difference in Fermi energies of the two types of junction, relative to the frontier orbitals of the molecules. For most molecules, their electrical conductance in graphene-molecule-Au junctions is higher than that in Au-molecule-Au junctions, which suggests that graphene offers superior electrode performance, when utilizing carboxylic acid anchor groups.