Optically Rough and Physically Flat Transparent Conductive Substrates with Strong Far-Field Scattering.

Optically rough and physically flat transparent conductive (OR-PF) substrates facilitate the performance improvement of optoelectronic devices and functional glasses via simultaneously enabling high-quality growth of functional layers and effective light management. This paper studies the effect of the interface morphology of the hole array pattern (HAP) and the pillar array pattern (PAP) on the far-field scattering properties of OR-PF substrates fabricated by spin-coating Al-doped ZnO (AZO) on nanoimprint-patterned glasses for improving the performance of superstrate-type thin-film solar cells. Theoretical calculation based on bidirectional scattering distribution function predicts that HAP with a period of 1.5 µm and a diameter of 1.3 µm [HAP(P1.5D1.3)] and the PAP(P1.0D0.5) interface morphology have a haze ratio in transmission (HT) of around 64% and a scatter angle of larger than 34°. The fabricated AZO/HAP(P1.5D1.3) and AZO/PAP(P1.0D0.5) show a flat surface with a σrms of less than 9 nm, a high visible light transmittance of over 86%, a sheet resistance of about 30 Ω/sq, and strong far-field scattering. In particular, AZO/PAP(P1.0D0.5) possesses an average HT of over 11% at the wavelength range of 600-850 nm and an angular intensity distribution of over 1.5% at an azimuthal angle of around 55°, indicating stronger far-field scattering than the conventional pyramid-textured B-doped ZnO (BZO/F). Compared to the flat substrate, AZO/PAP generates an implied Jsc gain of 16.2% in a CH3NH3PbI3 photoactive layer with a thickness of 300 nm under normal incidence at the wavelength range of 550-800 nm. For 60° incidence, AZO/PAP(P1.0D0.5) enables an implied Jsc gain of 2.3% with respect to BZO/F. As applied to the front electrode of CH3NH3PbI3 thin-film solar cells, compared to BZO/F, AZO/PAP(P1.0D0.5) would enable a gain of up to 16.7 and 11.2% in photoelectric conversion efficiency for the 0 and 60° incidence, respectively.

Preparation and Electrochemical Properties of Pomegranate-Shaped Fe2O3/C Anodes for Li-ion Batteries.

Due to the severe volume expansion and poor cycle stability, transition metal oxide anode is still not meeting the commercial utilization. We herein demonstrate the synthetic method of core-shell pomegranate-shaped Fe2O3/C nano-composite via one-step hydrothermal process for the first time. The electrochemical performances were measured as anode material for Li-ion batteries. It exhibits excellent cycling performance, which sustains 705 mAh g-1 reversible capacities after 100 cycles at 100 mA g-1. The anodes also showed good rate stability with discharge capacities of 480 mAh g-1 when cycling at a rate of 2000 mA g-1. The excellent Li storage properties can be attributed to the unique core-shell pomegranate structure, which can not only ensure good electrical conductivity for active Fe2O3, but also accommodate huge volume change during cycles as well as facilitate the fast diffusion of Li ion.