Strain regulation retards natural operation decay of perovskite solar cells.

Perovskite solar cells (pero-SCs) have undergone a rapid development in the last decade. However, there is still a lack of systematic studies to investigate whether the empirical rules of working lifetime assessment used in silicon solar cells can be applied to pero-SCs. It is commonly believed that pero-SCs show enhanced stability under day/night cycling due to the reported self-healing effect in the dark.1,2 While we discovered that the degradation of highly efficient FAPbI3 pero-SCs is in fact much faster under natural day/night cycling mode, questioning the widely accepted approach to estimate the operational lifetime of pero-SCs based on continuous mode testing. We reveal the key factor to be the lattice strain caused by thermal expansion/shrinking of the perovskite during the operation, an effect that gradually relaxes under the continuous-illumination mode but cycles synchronously under the cycling mode.3,4 The periodic lattice strain under the cycling mode results in deep trap accumulation and chemical degradation during operation, decreasing the ion migration potential and hence the device lifetime.5 We introduce phenylselenenyl chloride (Ph-Se-Cl) to regulate the perovskite lattice strain during day/night cycling, which achieved the certified efficiency of 26.3% and a 10-time improved T80 lifetime under the cycling mode after the modification.

Eliminating performance loss from perovskite films to solar cells.

Preoptimizing perovskite films may generally improve the performance of the final perovskite solar cells (PSCs). However, the research on whether the film optimization fully contributes to the enhancement of the final PSCs has been long neglected. We demonstrated that the preparation of metal electrodes by high-vacuum thermal evaporation, an unavoidable step in almost all device fabrication processes, will damage the surface of perovskite films, resulting in component escape, defect density rebound, carrier extraction barrier, and film stability deterioration. Therefore, the prepared perovskite film and the final film actually working in devices are not exactly the same, and the contribution of film optimization to the device improvement was weakened. We designed a bilayer structure composed of graphene oxide and graphite flakes to eliminate the unwanted film inconsistencies and thus save the film optimization loss. Therefore, the efficient PSCs with power conversion efficiency of 25.55% were obtained, which demonstrated negligible photovoltaic performance loss after operating for 2000 hours.

Pure-Phase Perovskite Quantum Well for Green Light-Emitting Diodes.

Perovskite multiple quantum wells (MQWs) have shown great potential in the field of light-emitting diodes (LEDs). However, the random formation of QWs with varying well widths (n numbers) often leads to suboptimal interface defects and charge transport issues. Here, we reveal that the crystallization sequence of bromide-based perovskite MQWs is large-n QWs preceding small-n QWs. With this insight, we prevent the crystallization of subsequent small-n QWs by reducing the crystallization rate, ultimately resulting in the crystallization of only n = 5 QWs. This reduction in the crystallization rate is achieved through the chemical interaction of dual additives with perovskite constituents. Additionally, the chemical interaction effectively passivates the uncoordinated lead ions defects. Consequently, pure-phase perovskite QWs with a high photoluminescence quantum efficiency of 75% are achieved. The resulting green LEDs achieve a peak external quantum efficiency of 17.1% and a maximum luminance of 29,480 cd m-2, which is attractive for full-color display applications of perovskites.

Nuclei engineering for even halide distribution in stable perovskite/silicon tandem solar cells.

Wide-bandgap (WBG) absorbers in tandem configurations suffer from poor crystallinity and weak texture, which leads to severe mixed halide-cation ion migration and phase segregation during practical operation. We control WBG film growth insensitive to compositions by nucleating the 3C phase before any formation of bromine-rich aggregates and 2H phases. The resultant WBG absorbers show improved crystallinity and strong texture with suppressed nonradiative recombination and enhanced resistance to various aging stresses. Perovskite/silicon tandem solar cells achieve power conversion efficiencies of 29.4% (28.8% assessed by a third party) in a 25-square centimeter active area and 32.5% in a 1-square centimeter active area. These solar cells retained 98.3 and 90% of the original efficiency after 1301 and 800 hours of operation at 25° and 50°C, respectively, at the maximum power point (AM 1.5G illumination, full spectrum, 1-sun) when encapsulated.

High Current Efficiency Red Perovskite Light-Emitting Diodes Meeting Rec. 2020 Standard.

Cesium lead iodide light-emitting diodes (LEDs) are attractive for displays due to their Rec. 2020 red standard compliance. However, achieving high current efficiencies (CEs), which is important for displays, is challenging because their emission spectrum is near the tail of the photopic luminosity function. Substituting some iodine with bromine can improve CEs by enlarging the bandgap, but defects easily form in iodine-bromine mixed perovskites. Here, we successfully reduced defect formation by adding organic ammonium salts and zwitterions. The organic ammonium salts do not form low-dimensional perovskites under the hydrogen bonding interaction of zwitterions. Instead, they passivate the cesium vacancy by forming new hydrogen bonds after perovskite crystallization. This approach leads to a red perovskite LED with a high CE of 12.8 cd A-1 and a peak external quantum efficiency of 20.3%, meeting the Rec. 2020 standard. It can be extended to large-area devices (2500 mm2) without a significant efficiency loss.

Manipulating crystallization dynamics through chelating molecules for bright perovskite emitters.

Molecular additives are widely utilized to minimize non-radiative recombination in metal halide perovskite emitters due to their passivation effects from chemical bonds with ionic defects. However, a general and puzzling observation that can hardly be rationalized by passivation alone is that most of the molecular additives enabling high-efficiency perovskite light-emitting diodes (PeLEDs) are chelating (multidentate) molecules, while their respective monodentate counterparts receive limited attention. Here, we reveal the largely ignored yet critical role of the chelate effect on governing crystallization dynamics of perovskite emitters and mitigating trap-mediated non-radiative losses. Specifically, we discover that the chelate effect enhances lead-additive coordination affinity, enabling the formation of thermodynamically stable intermediate phases and inhibiting halide coordination-driven perovskite nucleation. The retarded perovskite nucleation and crystal growth are key to high crystal quality and thus efficient electroluminescence. Our work elucidates the full effects of molecular additives on PeLEDs by uncovering the chelate effect as an important feature within perovskite crystallization. As such, we open new prospects for the rationalized screening of highly effective molecular additives.

Impact of Amine Additives on Perovskite Precursor Aging: A Case Study of Light-Emitting Diodes.

Amines are widely employed as additives for improving the performance of metal halide perovskite optoelectronic devices. However, amines are well-known for their high chemical reactivity, the impact of which has yet to receive enough attention from the perovskite light-emitting diode community. Here, by investigating an unusual positive aging effect of CH3NH3I/CsI/PbI2 precursor solutions as an example, we reveal that amines gradually undergo N-formylation in perovskite precursors over time. This reaction is initialized by hydrolysis of dimethylformamide in the acidic chemical environment. Further investigations suggest that the reaction products collectively impact perovskite crystallization and eventually lead to significantly enhanced external quantum efficiency values, increasing from ∼2% for fresh solutions to ≳12% for aged ones. While this case study provides a positive aging effect, a negative aging effect is possible in other perovksite systems. Our findings pave the way for more reliable and reproducible device fabrication and call for further attention to underlying chemical reactions within the perovskite inks once amine additives are included.

Color-Stable Blue Light-Emitting Diodes Enabled by Effective Passivation of Mixed Halide Perovskites.

Bandgap tuning through mixing halide anions is one of the most attractive features for metal halide perovskites. However, mixed halide perovskites usually suffer from phase segregation under electrical biases. Herein, we obtain high-performance and color-stable blue perovskite LEDs (PeLEDs) based on mixed bromide/chloride three-dimensional (3D) structures. We demonstrate that the color instability of CsPb(Br1-xClx)3 PeLEDs results from surface defects at perovskite grain boundaries. By effective defect passivation, we achieve color-stable blue electroluminescence from CsPb(Br1-xClx)3 PeLEDs, with maximum external quantum efficiencies of up to 4.5% and high luminance of up to 5351 cd m-2 in the sky-blue region (489 nm). Our work provides new insights into the color instability issue of mixed halide perovskites and can spur new development of high-performance and color-stable blue PeLEDs.

Mixed halide perovskites for spectrally stable and high-efficiency blue light-emitting diodes.

Bright and efficient blue emission is key to further development of metal halide perovskite light-emitting diodes. Although modifying bromide/chloride composition is straightforward to achieve blue emission, practical implementation of this strategy has been challenging due to poor colour stability and severe photoluminescence quenching. Both detrimental effects become increasingly prominent in perovskites with the high chloride content needed to produce blue emission. Here, we solve these critical challenges in mixed halide perovskites and demonstrate spectrally stable blue perovskite light-emitting diodes over a wide range of emission wavelengths from 490 to 451 nanometres. The emission colour is directly tuned by modifying the halide composition. Particularly, our blue and deep-blue light-emitting diodes based on three-dimensional perovskites show high EQE values of 11.0% and 5.5% with emission peaks at 477 and 467 nm, respectively. These achievements are enabled by a vapour-assisted crystallization technique, which largely mitigates local compositional heterogeneity and ion migration.

Perovskite-molecule composite thin films for efficient and stable light-emitting diodes.

Although perovskite light-emitting diodes (PeLEDs) have recently experienced significant progress, there are only scattered reports of PeLEDs with both high efficiency and long operational stability, calling for additional strategies to address this challenge. Here, we develop perovskite-molecule composite thin films for efficient and stable PeLEDs. The perovskite-molecule composite thin films consist of in-situ formed high-quality perovskite nanocrystals embedded in the electron-transport molecular matrix, which controls nucleation process of perovskites, leading to PeLEDs with a peak external quantum efficiency of 17.3% and half-lifetime of approximately 100 h. In addition, we find that the device degradation mechanism at high driving voltages is different from that at low driving voltages. This work provides an effective strategy and deep understanding for achieving efficient and stable PeLEDs from both material and device perspectives.

A Thermodynamically Favored Crystal Orientation in Mixed Formamidinium/Methylammonium Perovskite for Efficient Solar Cells.

Crystal orientation has a great impact on the properties of perovskite films and the resultant device performance. Up to now, the exquisite control of crystal orientation (the preferred crystallographic planes and the crystal stacking mode with respect to the particular planes) in mixed-cation perovskites has received limited success, and the underlying mechanism that governs device performance is still not clear. Here, a thermodynamically favored crystal orientation in formamidinium/methylammonium (FA/MA) mixed-cation perovskites is finely tuned by composition engineering. Density functional theory calculations reveal that the FA/MA ratio affects the surface energy of the mixed perovskites, leading to the variation of preferential orientation consequently. The preferable growth along the (001) crystal plane, when lying parallel to the substrates, affects their charge transportation and collection properties. Under the optimized condition, the mixed-cation perovskite (FA1- x MAx PbI2.87 Br0.13 (Cl)) solar cells deliver a champion power conversion efficiency over 21%, with a certified efficiency of 20.50 ± 0.50%. The present work not only provides a vital step in understanding the intrinsic properties of mixed-cation perovskites but also lays the foundation for further investigation and application in perovskite optoelectronics.

Manipulation of facet orientation in hybrid perovskite polycrystalline films by cation cascade.

Crystal orientations in multiple orders correlate to the properties of polycrystalline materials, and it is critical to manipulate these microstructural arrangements to enhance device performance. Herein, we report a controllable approach to manipulate the facet orientation within the ABX3 hybrid perovskites polycrystalline films by cation cascade doping at A-site. Two-dimensional synchrotron radiation grazing incidence wide-angle X-ray scattering is employed to probe the crystal orientations in multiple orders in mixed perovskites thin films, revealing a general pattern to guide crystal planes stacking upon extrinsic doping during crystallization. Different from previous studies, this method enables to adjust the crystal stacking mode of certain crystallographic planes in polycrystalline perovskites. Moreover, the preferred facet orientation is found to facilitate photocarrier transport across the absorber and pertaining interface in the resultant PV device, which provides an exemplary paradigm for further explorations that relate to the microstructures of hybrid perovskite materials and relevant optoelectronics.

Exploration of Crystallization Kinetics in Quasi Two-Dimensional Perovskite and High Performance Solar Cells.

Halide perovskites with reduced-dimensionality (e.g., quasi-2D, Q-2D) have promising stability while retaining their high performance as compared to their three-dimensional counterpart. Generally, they are obtained in (A1)2(A2)n-1PbnI3n+1 thin films by adjusting A site cations, however, the underlying crystallization kinetics mechanism is less explored. In this manuscript, we employed ternary cations halides perovskite (BA)2(MA,FA)3Pb4I13 Q-2D perovskites as an archetypal model, to understand the principles that link the crystal orientation to the carrier behavior in the polycrystalline film. We reveal that appropriate FA+ incorporation can effectively control the perovskite crystallization kinetics, which reduces nonradiative recombination centers to acquire high-quality films with a limited nonorientated phase. We further developed an in situ photoluminescence technique to observe that the Q-2D phase (n = 2, 3, 4) was formed first followed by the generation of n = ∞ perovskite in Q-2D perovskites. These findings substantially benefit the understanding of doping behavior in Q-2D perovskites crystal growth, and ultimately lead to the highest efficiency of 12.81% in (BA)2(MA,FA)3Pb4I13 Q-2D perovskites based photovoltaic devices.

Microstructure variations induced by excess PbX2 or AX within perovskite thin films.

We systematically investigated the impact of stoichiometric ratio variation between PbX2 and AX on hybrid perovskite films from the perspective of microstructure, especially on the plane stacking directions, using the two-dimensional synchrotron radiation grazing incidence wide-angle X-ray scattering (GIWAXS) technique. The tuned crystal plane stacking in perovskite films can consequently enlighten further explorations about the relationship between microstructure and solar cell performance.

A general approach for nanoparticle composite transport materials toward efficient perovskite solar cells.

The design of electron transport layers (ETLs) is crucial to the performance of optoelectronic devices. A composite ETL was constructed to overcome the poor carrier extraction issue in perovskite solar cells, resulting in a maximum PCE of 19.14% with reduced hysteresis. A similar enhancement phenomenon was observed in both devices based on TiO2 and SnO2 ETLs.

High-Mobility p-Type Organic Semiconducting Interlayer Enhancing Efficiency and Stability of Perovskite Solar Cells.

A high-mobility p-type organic semiconductor based on benzodithiophene and diketopyrrolopyrrole with linear alkylthio substituents (BDTS-2DPP) is used as a dual function interfacial layer to modify the interface of perovskite/2,2',7,7'-tetrakis(N,N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene in planar perovskite solar cells. The BDTS-2DPP layer can remarkably passivate the surface defects of perovskite through the formation of Lewis adduct between the under-coordinated Pb atoms in perovskite and S atoms in BDTS-2DPP, and also shows efficient hole extraction and transfer properties. The devices with BDTS-2DPP interlayer show a peak power conversion efficiency of 18.2%, which is higher than that of reference devices without the BDTS-2DPP interlayer (16.9%). Moreover, the hydrophobic BDTS-2DPP interlayer effectively protects the perovskite against moisture, leading to enhanced device stability.

A-Site Cation Effect on Growth Thermodynamics and Photoconductive Properties in Ultrapure Lead Iodine Perovskite Monocrystalline Wires.

Among the various building blocks beyond polycrystalline thin films, perovskite wires have attracted extensive attention for potential applications including nanolasers, waveguides, field-effect transistors, and more. In this work, millimeter-scale lead iodine-based perovskite wires employing various A-site substitutions, namely, Cs, methylammonium (MA), and formamidinium (FA), have been synthesized via a new type solution method with nearly 100% yield. All of the three millimeter scale perovskite wires (MPWs) compositions exhibit relatively high quality, and CsPbI3 is proven to be monocrystalline along its entire length. Furthermore, the growth thermodynamics of the APbI3 MPWs with respect to A-site cation effect were studied thoroughly by various characterization techniques. Finally, single MPW photodetectors have been fabricated utilizing the APbI3 MPWs for studying the photoconductive properties, which show different sensitivities under illumination. This systematic synthesis method of solution-processed APbI3 (Cs, MA, and FA) MPWs reveals a wide spectrum of additives with different coordination capability that mediates perovskite materials growth. It proved to serve as a new parameter that further aids in the rational process of the polycrystalline organic/inorganic hybrids materials. These MPWs also have the potential to open up new opportunities for integrated nanoelectronics ranging from the nanometer through millimeter length scales.

CsI Pre-Intercalation in the Inorganic Framework for Efficient and Stable FA1-x Csx PbI3 (Cl) Perovskite Solar Cells.

Engineering the chemical composition of organic and inorganic hybrid perovskite materials is one of the most feasible methods to boost the efficiency of perovskite solar cells with improved device stability. Among the diverse hybrid perovskite family of ABX3 , formamidinium (FA)-based mixed perovskite (e.g., FA1-x Csx PbI3 ) possesses optimum bandgaps, superior optoelectronic property, as well as thermal- and photostability, which is proven to be the most promising candidate for advanced solar cell. Here, FA0.9 Cs0.1 PbI3 (Cl) is implemented as the light-harvesting layer in planar devices, whereas a low temperature, two-step solution deposition method is employed for the first time in this materials system. This paper comprehensively exploits the role of Cs+ in the FA0.9 Cs0.1 PbI3 (Cl) perovskite that affects the precursor chemistry, film nucleation and grain growth, and defect property via pre-intercalation of CsI in the inorganic framework. In addition, the resultant FA0.9 Cs0.1 PbI3 (Cl) films are demonstrated to exhibit an improved optoelectronic property with an elevated device power conversion efficiency (PCE) of 18.6%, as well as a stable phase with substantial enhancement in humidity and thermal stability, as compared to that of FAPbI3 (Cl). The present method is able to be further extended to a more complicated (FA,MA,Cs)PbX3 material system by delivering a PCE of 19.8%.

Chemical Reduction of Intrinsic Defects in Thicker Heterojunction Planar Perovskite Solar Cells.

Minimization of defects in absorber materials is essential for hybrid perovskite solar cells, especially when constructing thick polycrystalline layers in a planar configuration. Here, a simple methylamine solution-based additive is reported to improve film quality with nearly an order of magnitude reduction in intrinsic defect concentration. In the resultant film, an increase in carrier lifetime as a result of a decrease in shallow electronic disorder is observed. This superior crystalline film quality is further evidenced via a doubled spin relaxation time as compared with other reports. Bearing sufficient carrier diffusion length, a thick absorber layer (≈650 nm) is implemented in planar devices to achieve a champion power conversion efficiency of 20.02% with a stabilized output efficiency of 19.01% under one sun illumination. This work demonstrates a simple approach to improve hybrid perovskite film quality by substantial reduction of intrinsic defects for wide applications in optoelectronics.

Interfacial electronic structures revealed at the rubrene/CH3NH3PbI3 interface.

The electronic structures of rubrene films deposited on CH3NH3PbI3 perovskite have been investigated using in situ ultraviolet photoelectron spectroscopy (UPS) and X-ray photoelectron spectroscopy (XPS). It was found that rubrene molecules interacted weakly with the perovskite substrate. Due to charge redistribution at their interface, a downward 'band bending'-like energy shift of ∼0.3 eV and an upward band bending of ∼0.1 eV were identified at the upper rubrene side and the CH3NH3PbI3 substrate side, respectively. After the energy level alignment was established at the rubrene/CH3NH3PbI3 interface, its highest occupied molecular orbital (HOMO)-valence band maximum (VBM) offset was found to be as low as ∼0.1 eV favoring the hole extraction with its lowest unoccupied molecular orbital (LUMO)-conduction band minimum (CBM) offset as large as ∼1.4 eV effectively blocking the undesired electron transfer from perovskite to rubrene. As a demonstration, simple inverted planar solar cell devices incorporating rubrene and rubrene/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) hole transport layers (HTLs) were fabricated in this work and yielded a champion power conversion efficiency of 8.76% and 13.52%, respectively. Thus, the present work suggests that a rubrene thin film could serve as a promising hole transport layer for efficient perovskite-based solar cells.