Synergistic Promotion System of Montmorillonite with Cu2+ and Benzalkonium Chloride for Efficient and Broad-Spectrum Antibacterial Activity.

By intercalating montmorillonite (MMT) with Cu2+ and benzalkonium chloride (BAC), the present work constructed a synergistic promotion system (Cu2+/BAC/MMT). MMT not only enhances the thermal stability of Cu2+ and BAC but also facilitates the controlled release of Cu2+ and BAC. Concurrently, the introduction of BAC improves the material's organic compatibility. In vitro assays show that the "MIC+" of Cu2+/BAC/MMT against Staphylococcus aureus is merely 7.32 mg/L and 55.56 mg/L against Escherichia coli. At concentrations of 10 and 25 mg/L, Cu2+/BAC/MMT inactivates 100% of S. aureus and E. coli within 2 h, respectively. Furthermore, it is confirmed that the prepared Cu2+/BAC/MMT exhibits a long-term antibacterial ability through antibacterial experiments and release tests. Also, the biosafety of this material was also substantiated by in vitro cytotoxicity tests. These comprehensive findings indisputably portend that Cu2+/BAC/MMT holds promise to supplant antibiotics as an efficacious treatment modality for bacterial infections.

Lactobacillus fermentum Alleviates the Colorectal Inflammation Induced by Low-Dose Sub-Chronic Microcystin-LR Exposure.

Microcystin-LR (MC-LR) contamination is a worldwide environmental problem that poses a grave threat to the water ecosystem and public health. Exposure to MC-LR has been associated with the development of intestinal injury, but there are no effective treatments for MC-LR-induced intestinal disease. Probiotics are "live microorganisms that are beneficial to the health of the host when administered in sufficient quantities". It has been demonstrated that probiotics can prevent or treat a variety of human diseases; however, their ability to mitigate MC-LR-induced intestinal harm has not yet been investigated. The objective of this study was to determine whether probiotics can mitigate MC-LR-induced intestinal toxicity and its underlying mechanisms. We first evaluated the pathological changes in colorectal tissues using an animal model with sub-chronic exposure to low-dose MC-LR, HE staining to assess colorectal histopathologic changes, qPCR to detect the expression levels of inflammatory factors in colorectal tissues, and WB to detect the alterations on CSF1R signaling pathway proteins in colorectal tissues. Microbial sequencing analysis and screening of fecal microorganisms differential to MC-LR treatment in mice. To investigate the role of microorganisms in MC-LR-induced colorectal injury, an in vitro model of MC-LR co-treatment with microorganisms was developed. Our findings demonstrated that MC-LR treatment induced an inflammatory response in mouse colorectal tissues, promoted the expression of inflammatory factors, activated the CSF1R signaling pathway, and significantly decreased the abundance of Lactobacillus. In a model of co-treatment with MC-LR and Lactobacillus fermentum (L. fermentum), it was discovered that L. fermentum substantially reduced the incidence of the colorectal inflammatory response induced by MC-LR and inhibited the protein expression of the CSF1R signaling pathway. This is the first study to suggest that L. fermentum inhibits the CSF1R signaling pathway to reduce the incidence of MC-LR-induced colorectal inflammation. This research may provide an excellent experimental foundation for the development of strategies for the prevention and treatment of intestinal diseases in MC-LR.

Effect of microstructure in mesoporous adsorbents on the adsorption of low concentrations of VOCs: An experimental and simulation study.

This study evaluated the adsorption of five volatile organic compounds (VOCs) on Opoka, precipitated silica, and palygorskite, to elucidate the effect of their pore size on VOCs adsorption. The adsorption capacity of these adsorbents is not only highly correlated with their surface area and pore volume, but also notably improved by the presence of micropores. The variation in adsorption capacity for different VOCs was primarily influenced by their boiling point and polarity. Palygorskite, which had the smallest total pore volume (0.357 cm3/g) but the largest micropore volume (0.043 cm3/g) among the three adsorbents, exhibited the highest adsorption capacity for all tested VOCs. Additionally, the study constructed slit pore models of palygorskite with micropores (0.5 and 1.5 nm) and mesopores (3.0 and 6.0 nm), calculated and discussed the heat of adsorption, concentration distribution, and interaction energy of VOCs adsorbed on different pore models. The results revealed that the adsorption heat, concentration distribution, total interaction energy, and van der Waals energy decrease with increasing pore size. The concentration of VOCs in 0.5 nm pore was nearly three times that in 6.0 nm pore. This work can also provide guidance for further research on using adsorbents with mixed microporous and mesoporous structures to control VOCs.

Subchronic Microcystin-LR Aggravates Colorectal Inflammatory Response and Barrier Disruption via Raf/ERK Signaling Pathway in Obese Mice.

Microcystin-LR (MC-LR) is an extremely poisonous cyanotoxin that poses a threat to ecosystems and human health. MC-LR has been reported as an enterotoxin. The objective of this study was to determine the effect and the mechanism of subchronic MC-LR toxicity on preexisting diet-induced colorectal damage. C57BL/6J mice were given either a regular diet or a high-fat diet (HFD) for 8 weeks. After 8 weeks of feeding, animals were supplied with vehicle or 120 µg/L MC-LR via drinking water for another 8 weeks, and their colorectal were stained with H&E to detect microstructural alterations. Compared with the CT group, the HFD and MC-LR + HFD-treatment group induced a significant weight gain in the mice. Histopathological findings showed that the HFD- and MC-LR + HFD-treatment groups caused epithelial barrier disruption and infiltration of inflammatory cells. The HFD- and MC-LR + HFD-treatment groups raised the levels of inflammation mediator factors and decreased the expression of tight junction-related factors compared to the CT group. The expression levels of p-Raf/Raf and p-ERK/ERK in the HFD- and MC-LR + HFD-treatment groups were significantly increased compared with the CT group. Additionally, treated with MC-LR + HFD, the colorectal injury was further aggravated compared with the HFD-treatment group. These findings suggest that by stimulating the Raf/ERK signaling pathway, MC-LR may cause colorectal inflammation and barrier disruption. This study suggests that MC-LR treatment may exacerbate the colorectal toxicity caused by an HFD. These findings offer unique insights into the consequences and harmful mechanisms of MC-LR and provide strategies for preventing and treating intestinal disorders.

Defect Engineering Modulated Iron Single Atoms with Assist of Layered Clay for Enhanced Advanced Oxidation Processes.

Single-atom catalysts (SACs) feature maximum atomic utilization efficiency; however, the loading amount, dispersibility, synthesis cost, and regulation of the electronic structure are factors that need to be considered in water treatment. In this study, kaolinite, a natural layered clay mineral, is applied as the support for g-C3 N4 and single Fe atoms (FeSA-NGK). The FeSA-NGK composite exhibits an impressive degradation performance toward the target pollutant (>98% degradation rate in 10 min), and catalytic stability across consecutive runs (90% reactivity maintained after three runs in a fluidized-bed catalytic unit) under peroxymonosulfate (PMS)/visible light (Vis) synergetic system. The introduction of kaolinite promotes the loading amount of single Fe atoms (2.57 wt.%), which is a 14.2% increase compared to using a bare catalyst without kaolinite, and improved the concentration of N vacancies, thereby optimizing the regulation of the electronic structure of the single Fe atoms. It is discovered that the single Fe atoms successfully occupied five coordinated N atoms and combined with a neighboring N vacancy. Consequently, this regulated the local electronic structure of single Fe atoms, which drives the electrons of N atoms to accumulate on the Fe centers. This study opens an avenue for the design of clay-based SACs for water purification.

High-efficient mineralization of formaldehyde by three-dimensional "PIZZA"-like bismuth molybdate-titania/diatomite composite.

The application of TiO2-based photocatalysts in air pollution control has attracted much attention thanks to their advantageous green and sustainable performance. However, how to improve the degradation efficiency under visible light is still challenging. Herein, we report a ternary three-dimensional "PIZZA"-like Bi2MoO6-TiO2/diatomite (BTD) composite with high-efficient mineralization and recycling performance towards gaseous formaldehyde (HCHO) under visible light. The high-efficient adsorption-photocatalysis collaborative system with intimate interface combination is successfully established among Bi2MoO6 (BMO), TiO2 and diatomite. The HCHO mineralization rate constant of BTD-1:2 composite is up to around 4.03 times and 2.18 times higher than those of bare BMO and binary Bi2MoO6-TiO2 composite, respectively. It is indicated that the introduction of diatomite increases active sites and plays the vital role in the improvement of photocatalysis. In addition, the photogenerated holes (h+) and hydroxyl radical (OH) are proved to be the main active species for HCHO mineralization. Furthermore, there is a competitive adsorption relationship between water (H2O) molecules and HCHO molecules, and both H2O molecules and oxygen (O2) molecules participated in the reaction of HCHO mineralization based on in-situ DRIFTs spectra analysis. Our work would give a new perspective on gaseous HCHO purification.

Protrudent electron transfer channels on kaolinite modified iron oxide QDs/N vacancy graphitic carbon nitride driving superior catalytic oxidation.

Optimizing electron transfer channels and sufficiently exposing active sites to trigger an efficient Fenton-like reaction are vital for manipulating catalytic properties of water treatment. Herein, Fe2O3 quantum dots were prepared and integrated with composites of g-C3N4 and kaolinite with nitrogen (N) vacancies (FONGK-10) for bisphenol A (BPA) removal in a peroxymonosulfate (PMS)/visible light (Vis) system. X-ray absorption near-edge structures and extended X-ray absorption fine structures demonstrated interface's combined properties. In particular, the tight interfacial contact and introduction of N vacancies resulted in the formation of effective electron channels, which caused more effective separation of electron-hole pairs and an extended response time of 1.5 × 10-4 s. Furthermore, the introduction of kaolinite reduced the Fe2O3 particle size and accelerated PMS consumption. The k value in FONGK-10/PMS/Vis system was 4.5 times that of the FONGK-10/PMS and 27.5 times that of the FONGK-10/Vis system, and the synergetic system exhibited superior consecutive catalytic performance in a fluidized-bed catalytic unit, degrading ~100% of BPA in 200 min. The exposed electron channels significantly maintained the Fe(III)/Fe(II) stable dynamic cycle, thereby enhancing the activation of PMS and photocatalysis performance.

Chronic exposure to low concentration of MC-LR caused hepatic lipid metabolism disorder.

Microcystin-LR (MC-LR), a potent hepatotoxin can cause liver damages. However, research on hepatic lipid metabolism caused by long-term exposure to environmental concentrations MC-LR is limited. In the current study, mice were exposed to various low concentrations of MC-LR (0, 1, 30, 60, 90, 120 µg/L in the drinking water) for 9 months. The general parameters, serum and liver lipids, liver tissue pathology, lipid metabolism-related genes and proteins of liver were investigated. The results show that chronic MC-LR exposure had increased the levels of triglyceride (TG) and total cholesterol (TC) in serum and liver. In addition, histological observation revealed that hepatic lobules were disordered with obvious inflammatory cell infiltration and lipid droplets. More importantly, the mRNA and proteins expression levels of lipid synthesis-related nuclear sterol regulatory element binding protein-1c (nSREBP-1c), SREBP-1c, cluster of differentiation 36 (CD36), acetyl-CoA-carboxylase1 (ACC1), stearoyl-CoA desaturase1 (SCD1) and fatty acid synthase (FASN) were increased in MC-LR treated groups, the expression levels of fatty acids ß-oxidation related genes peroxisomal acyl-coenzyme A oxidase 1 (ACOX1) was decreased after exposure to 60-120 µg/L MC-LR. Furthermore, the inflammatory factors interleukin 6 (IL-6) and tumor necrosis factor-α (TNF-α) were higher than that in the control group. All the findings indicated that mice were exposed to chronic low concentrations MC-LR caused liver inflammation and hepatic lipid metabolism disorder .

Construction of BiOCl/Clinoptilolite Composite Photocatalyst for Boosting Formaldehyde Removal.

Binary composite was synthesized via coupling BiOCl with alkali leached natural clinoptilolite (40B0/CN), which showed retarded recombination of photo-generated carriers. The clinoptilolite was pretreated with alkali leaching, resulting in a larger pore size and high cation exchange capacity. The modified clinoptilolite was more feasible for the growth of BiOCl and to promote the adsorption ability for formaldehyde (HCHO). In addition, the cation exchange capacity was conducive to anchor Bi3+, further leading to the reduction of the particle size of BiOCl. The carrier effect of alkali leached natural clinoptilolite promoted the amorphous transformation of BiOCl at low temperature, which simultaneously produced more distortions and defects in the BiOCl lattice. The 40B0/CN composite exhibited the superior light absorption ability with a narrower band gap. The photocatalytic degradation rate for HCHO of 40B0/CN under solar light reached 87.7%, and the reaction rate constant was 0.0166 min-1, which was 1.6 times higher than that of BiOCl. This paper gave a deep insight into photocatalytic technology to efficiently degrade formaldehyde.

High Removal Efficiency of Diatomite-Based X Zeolite for Cu2+ and Zn2.

Diatomite-based X zeolite was obtained and its crystallinity, morphology, and interface properties were investigated by XRD, BET, SEM, EDS, and XRF. The obtained X zeolite possessed a unique meso-microporous structure and showed good ion exchange properties for Cu2+ and Zn2+. The pseudo-second-order model and Langmuir isotherm model can best describe the adsorption kinetics and isotherms of Cu2+ and Zn2+, respectively. The maximal adsorption capacities of X zeolite for Cu2+ and Zn2+ were 146 and 195 mg/g at 323 K, respectively. Meanwhile, the adsorption process for Cu2+ and Zn2+ were chemical adsorption and ion exchange, respectively. Furthermore, the adsorption data turned out to be an endothermic and spontaneous process. Compared with other reported materials, the adsorption capacity of X zeolite synthesized from diatomite was among the highest. Therefore, it could be a promising adsorbent for the disposal of wastewater that contains metal ions.

Effects of environmental contaminants in water resources on nonalcoholic fatty liver disease.

The global prevalence of nonalcoholic fatty liver disease (NAFLD) has been increasing rapidly in recent years, which is now estimated to be over 25%. NAFLD is one of the most common chronic liver diseases in the world. At present, with the rapid development of economy and industrialization, many chemicals are released into the environment. These chemical contaminants in the environment might cause harm to human health and result in lipid metabolism disorder during long-term exposure. Moreover, the incentive of many NAFLD cases is unknown, and the environmental risk factors of NAFLD need to be urgently identified. Hence, we focus on the impacts of several popular environmental contaminants in water environment on the development and progression of NAFLD. These contaminants mainly include microcystins (MCs), disinfection by-products (DBPs), heavy metals (HMs), dioxins and polychlorinated biphenyls (PCBs). Through analyzing a great many epidemiological and toxicological studies, we have found positive associations between NAFLD and chronic exposure to these contaminants at the environmental levels. This review may enhance the understanding of liver damage caused by environmental pollutants, which are considered as tangible environmental risk factors for NAFLD.

Pb Toxicity on Gut Physiology and Microbiota.

Lead (Pb) is a toxic heavy metal, having profound threats to the global population. Multiple organs such as kidney, and liver, as well as nervous, hematologic, and reproductive systems, are commonly considered the targets of Pb toxicity. Increasing researches reported that the effects of Pb on gastrointestinal tracts are equally intensive, especially on intestinal microbiota. This review summarized Pb toxicity on gut physiology and microbiota in different animal models and in humans, of which the alterations may further have effects on other organs in host. To be more specific, Pb can impair gut barrier and increase gut permeability, which make inflammatory cytokines, immunologic factors, as well as microbial metabolites such as bile acids (BA) and short-chain fatty acids (SCFAs) enter the enterohepatic circulation easily, and finally induce multiple systematic lesion. In addition, we emphasized that probiotic treatment may be one of the feasible and effective strategies for preventing Pb toxicity.

A review of clay based photocatalysts: Role of phyllosilicate mineral in interfacial assembly, microstructure control and performance regulation.

Over the past decades, inspired by the outstanding properties of clay minerals such as abundance, low-cost, environmental benignity, high stability, and regularly arranged silica-alumina framework, researchers put much efforts on the interface assembly and surface modification of natural minerals with bare photocatalysts, i.e. TiO2, g-C3N4, ZnO, MoS2, etc. The clay-based hybrid photocatalysts have resulted in a rich database for their tailor-designed microstructures, characterizations, and environmental-related applications. Therefore, in this study, we took a brief introduction of three representative minerals, i.e. kaolinite, montmorillonite and rectorite, and discussed their basic merits in photocatalysis applications. After that, we summarized the recent advances in construction of stable visible-light driven photocatalysts based on these minerals. The structure-activity relationships between the properties of clay types, pore structure, distribution/dispersion and light absorption, carrier separation efficiency as well as redox performance were illustrated in detail. Such representative information would provide theoretical basis and scientific support for the application of clay based photocatalysts. Finally, we pointed out the major challenges and future directions at the end of this review. Undoubtedly, control and preparation of novel photocatalysts based on clays will continue to witness many breakthroughs in the arena of solar-driven technologies.

Clinoptilolite mediated activation of peroxymonosulfate through spherical dispersion and oriented array of NiFe2O4: Upgrading synergy and performance.

Inspired by the features of both transition metal oxide and natural clinoptilolite (flaky structure with suitable pore diameter and open skeleton structure), we adopted a robust strategy by immobilization of nickel ferrite nanoparticles (NiFe2O4) on the clinoptilolite surface via typical citric acid combustion method. The hybrid catalyst exhibited enhanced peroxymonosulfate (PMS) activation efficiency and bisphenol A (BPA) degradation performance. Calculated by effective equivalent of NiFe2O4, it is found that the reaction rate constant (k) of NiFe2O4/clinoptilolite/PMS system (0.1859 min-1) was 11.9 times higher than that of bare NiFe2O4/PMS system (0.0156 min-1), which demonstrated that catalyst would be conjugated to PMS or contaminant efficiently and renders the rapid degradation and mineralization in the presence of clinoptilolite. After comprehensive characterization analysis and DFT simulations, natural mineral carrier effect (i.e. decreased crystalline size, increased oxygen vacancy content, etc.), abundant surface-bonded and structural hydroxyl groups as well as effective bonding with iron or nickel ions charged for the potential activation mechanism of PMS by NiFe2O4/clinoptilolite composite. And it is indicated that not only •OH and SO4•-, but also 1O2 was involved into series reactions. Overall, this study put forward a green and promising technology for high-toxic wastewater treatment.

Mesoporous MCM-41 derived from natural Opoka and its application for organic vapors removal.

Mesoporous silica MCM-41 was synthesized by a facile hydrothermal treatment using sodium silicate extracted from natural Opoka as the Si source. The dynamic adsorption and desorption of organic vapors mixture on the MCM-41 were investigated. Characterization of the textural properties of the samples showed that the sample synthesized with a molar ratio of CTAB/Si = 0.16 possessed the largest specific surface area (988 m2/g) and pore volume (1.02 cm3/g), also uniform pore size distribution centered at 2.8 nm. The adsorption capacity of this sample for organic vapors mixture improved remarkably over raw Opoka and reached 158.5 mg/g at 20 â„ƒ, which is comparable to that of commercial activated carbon. The reusability of the adsorbent was tested by 5 adsorption and regeneration cycles. Obtained results demonstrate that the MCM-41 adsorbent can be easily regenerated by thermal desorption in air, and the cumulative heel on the adsorbent can be markedly reduced by increasing the desorption temperature, making it a promising adsorbent for VOCs abatement.

Synergistic activation of peroxymonosulfate via in situ growth FeCo2O4 nanoparticles on natural rectorite: Role of transition metal ions and hydroxyl groups.

Developing low-cost, high-efficiency catalysts for advanced oxidation processes remain a key issue for the degradation of organic pollutants. In this study, a novel FeCo2O4/rectorite composite was synthesized via a facile combustion process and employed to activate peroxymonosulfate (PMS) for dealing with atrazine (ATZ). The addition of rectorite could result in higher specific surface area, smaller pore size and more hydroxyl groups, which were beneficial to enrich pollutants to the adsorption sites and provide sufficient reactive sites. After meticulous evaluation, the degradation efficiency of FeCo2O4/rectorite composite towards ATZ exhibited improved PMS activation efficiency which was about 2.6 times than that of pure FeCo2O4. Based on the characterization results, the sulfate radicals and hydroxyl radicals were considered to be the main free radicals which were involved into the circulation of Co(II)-Co(III)-Co(II) as well as the oxidation of ≡Fe(II), which was responsible for the remarkable catalytic efficiency. In addition, the chemical stability and superior catalytic performance of FeCo2O4/rectorite should also be attributed to the chemical combination between metal ions and the surface hydroxyl groups of rectorite. Overall, these findings are beneficial for understanding the mechanism of PMS activation by natural mineral-based catalysts and contributing to the practical application of sulfate-based technology for organic wastewater treatment.

Diatomite-Metal-Organic Framework Composite with Hierarchical Pore Structures for Adsorption/Desorption of Hydrogen, Carbon Dioxide and Water Vapor.

Distinctive Cr-MOF@Da composites have been constructed using chromium-based metal-organic frameworks (MOFs) and diatomite (Da). The new materials have hierarchical pore structures containing micropores, mesopores and macropores. We have synthesized various morphologies of the MOF compound Cr-MIL-101 to combine with Da in a one-pot reaction step. These distinctive hierarchical pore networks within Cr-MIL-101@Da enable exceptional adsorptive performance for a range of molecules, including hydrogen (H2), carbon dioxide (CO2) and water (H2O) vapor. Selectivity for H2 or CO2 can be moderated by the morphology and composition of the Cr-MIL-101 included in the Cr-MOF@Da composite. The encapsulation and growth of Cr-MIL-101 within and on Da have resulted in excellent water retention as well as high thermal and hydrolytic stability. In some cases, Cr-MIL-101@Da composite materials have demonstrated increased thermal stability compared with that of Cr-MIL-101; for example, decomposition temperatures >340 ℃ can be achieved. Furthermore, these Cr-MIL-101@Da composites retain structural and morphological integrity after 60 cycles of repeated hydration/dehydration, and after storage for more than one year. These characteristics are difficult to achieve with many MOF materials, and thus suggest that MOF-mineral composites show high potential for practical gas storage and water vapor capture.

Multidimensional assembly of oxygen vacancy-rich amorphous TiO2-BiOBr-sepiolite composite for rapid elimination of formaldehyde and oxytetracycline under visible light.

Herein, a novel oxygen vacancy-rich amorphous TiO2-BiOBr-sepiolite composite was synthesized through a facile one-pot solvothermal method. Under visible light, it exhibited enhanced adsorption and photocatalytic removal activity towards gaseous formaldehyde, whose reaction rate constant is nearly 11.75, 3.44, 1.69, 2.18 and 6.27 times higher than those of amorphous TiO2, BiOBr, TiO2-BiOBr, oxygen vacancy-poor composite and P25, respectively. Moreover, it also displayed significantly improved photodegradation performance towards oxytetracycline under visible light. The improved photocatalytic activity is mainly ascribed to the synergy between the ternary heterogeneous structure and introduced oxygen vacancy, leading to the superior adsorption performance, extended visible-light adsorption scope and faster carriers' separation rate. The photogenerated holes are the dominant active species during the reaction process. Additionally, a plausible photocatalytic degradation pathway for oxytetracycline was also proposed. In general, this work provides a viable strategy of visible-light-driven photocatalyst for practical environmental remediation of indoor volatile organic compounds (VOCs) and pharmaceuticals and personal care products (PPCPs).

Multi-component design and in-situ synthesis of visible-light-driven SnO2/g-C3N4/diatomite composite for high-efficient photoreduction of Cr(VI) with the aid of citric acid.

A novel ternary SnO2/g-C3N4/diatomite (SCN/DE) nanocomposite was rationally designed and successfully synthesized via a two-step method with in-situ polymerization and self-assembling. Under visible light illumination, the resulting SCN/DE composite exhibited superior photocatalytic performance and good reusability for the photoreduction of Cr(VI) to Cr(III) in the presence of citric acid, the apparent rate constant of SCN/DE composite was up to around 22.68 times, 13.53 times and 8.65 times as much as those of g-C3N4 (CN), g-C3N4/diatomite (CN/DE) and SnO2/g-C3N4 (SCN) composites, respectively. The citric acid is a co-catalyst (chelating agent) rather than a reactant during the reactive process. Besides, the intimate interface contact and ternary heterogeneous structure were established among the SnO2, g-C3N4 and diatomite. The induced positive charged surface of diatomite should be the key factor in enhancing photoactivity of the resultant SCN/DE composite, which significantly accelerated the charge separation of photogenerated electron-hole pairs as well as improved the adsorption performance towards Cr (VI). In particular, a possible reduction pathway of Cr(VI) to Cr(III) by SCN/DE composite with the assistance of citric acid was first investigated and proposed. This work provides a novel strategy for synthesizing highly efficient mineral-based photocatalysts with great promising application foreground for Cr(VI)-containing wastewater treatment.

Surface Functionalization of Montmorillonite with Chitosan and the Role of Surface Properties on Its Adsorptive Performance: A Comparative Study on Mycotoxins Adsorption.

Understanding surface and interfacial information, which has a close relationship to the structures and properties of materials, helps guide the design of materials for specific applications. This study focuses on the surface functionalization of montmorillonite (Mt) with chitosan (CTS) and exploring the role of surface properties on its adsorptive performance. Two prototypical products, namely, 180-Htc@Mt and 250-Htc@Mt, were fabricated via the hydrothermal method at 180 and 250 °C, respectively. Field emission scanning electron microscopy revealed that hydrothermal carbon (Htc) derived from CTS anchored on the surface of Mt uniformly with a spherical morphology. The introduction of Htc endowed the surface of Mt with abundant hydroxy, amine, and amide groups; organic carbon; developed porosity; and hydrophobic interfacial property. Hydrothermal temperature has huge impacts on the surface system, and smaller particles (average size of 27 vs 53 nm) with deeper carbonization, higher content of carbonaceous and nitrogenous functional groups, more developed porosity (66.149 vs 39.434 m2/g of specific surface area, 0.115 vs 0.090 cm3/g of pore volume), and slightly decreased hydrophobicity can be readily achieved at a higher temperature. The incoming surface protonated amine and amide functional groups show an ion-dipolar interaction to polar aflatoxin B1 (AFB1), and the increased organic carbon content as well as interfacial hydrophobicity generate a hydrophobic interaction to weak polar zearalenone (ZER). Consequently, the surface functionalization affords Mt enhanced adsorption capacity for AFB1, approximately two times compared with Mt, and superior adsorption ability for ZER (10 mg/g). The present work provides sufficient evidence of "surface directs application" of Mt, which encourages researchers to focus on studies of the surface science of clay minerals.