Graphene Oxide-Enhanced and Dynamically Crosslinked Bio-Elastomer for Poly(lactic acid) Modification.

Being a bio-sourced and biodegradable polymer, polylactic acid (PLA) has been considered as one of the most promising substitutes for petroleum-based plastics. However, its wide application is greatly limited by its very poor ductility, which has driven PLA-toughening modifications to be a topic of increasing research interest in the past decade. Toughening enhancement is achieved often at the cost of a large sacrifice in strength, with the toughness-strength trade-off having remained as one of the main bottlenecks of PLA modification. In the present study, a bio-elastomeric material of epoxidized soybean oil (ESO) crosslinked with sebacic acid (SA) and enhanced by graphene oxide (GO) nanoparticles (NPs) was employed to toughen PLA with the purpose of simultaneously preserving strength and achieving additional functions. The even dispersion of GO NPs in ESO was aided by ultrasonication and guaranteed during the following ESO-SA crosslinking with GO participating in the carboxyl-epoxy reaction with both ESO and SA, resulting in a nanoparticle-enhanced and dynamically crosslinked elastomer (GESO) via a ß-hydroxy ester. GESO was then melt-blended with PLA, with the interfacial reaction between ESO and PLA offering good compatibility. The blend morphology, and thermal and mechanical properties, etc., were evaluated and GESO was found to significantly toughen PLA while preserving its strength, with the GO loading optimized at ~0.67 wt%, which gave an elongation at break of ~274.5% and impact strength of ~10.2 kJ/m2, being 31 times and 2.5 times higher than pure PLA, respectively. Moreover, thanks to the presence of dynamic crosslinks and GO NPs, the PLA-GESO blends exhibited excellent shape memory effect and antistatic properties.

Optimized preparation of Ni-Febm bimetallic particles by ball milling NiSO4 and iron powder for efficient removal of triclosan.

The excessive usage and emissions of triclosan (TCS) pose a serious threat to aquatic environments. Iron-based bimetallic particles (Pd/Fe, Ni/Fe, and Cu/Fe, etc.) were widely used for the degradation of chlorophenol pollutants. This study proposed a novel synthesis method for the preparation of Ni/Fe bimetallic particles (Ni-Febm) by ball milling microscale zero valent iron ZVI (mZVI) and NiSO4. Ball-milling conditions such as ball-milling time, ball-milling speed and ball-to-powder ratio were optimized to prepare high activity Ni-Febm bimetallic particles. During the ball-milling process, Ni2+ was reduced to Ni0 and formed a coupled structure with ZVI. The amount of Ni0 on ZVI significantly affected the activity of Ni-Febm bimetallic particles. The highest activity Ni-Febm bimetallic particles with Ni/Fe ratio of 0.03 were synthesized under optimized conditions, which could remove 86.56% of TCS (10 µM) in aerobic aqueous solution within 60 min. In addition, higher particle dosage, lower pH condition and higher reaction temperature were more conducive for TCS degradation. The higher corrosion current and lower electron transfer impedance of Ni-Febm bimetallic particles were the main reasons for its high activity. The hydrogen atom (•H) on the surface of Ni-Febm bimetallic particles was mainly contributed to the removal of TCS, as reductive transformation products of TCS were detected by LC-TOF-MS. Notably, a small amount of oxidation products were discovered. The total dechlorination rate of TCS was calculated to be 39.67%. After eight reaction cycles, the residual Ni-Febm bimetallic particles could still degrade 28.34% of TCS within 6 h. Low Ni2+ leaching during reaction indicated that Ni-Febm bimetallic particles did not pose potential environmental risks. The prepared environmental-friendly Ni-Febm bimetallic particles with high activity have great potential in the degradation of other chlorinated organic compounds in wastewater.

Key role of hydrogen atoms in the preparation of sulfidated zero valent iron.

Sulfidated zero valent iron (ZVI) is a popular material for the reductive degradation of halogenated organic pollutants. Simple and economic synthesis of this material is highly demanded. In this study, sulfidated micro/nanostructured ZVI (MNZVI) particles were prepared by simply heating MNZVI particles and sulfur elements (S0) in pure water (50℃). The iron oxides on the surface of MNZVI particles were conducive to sulfidation reaction, indicating the formation of iron-sulphide minerals (FeSx) on the surface of MNZVI particles might not be from the direct reaction of Fe0 with S0 (Fe0 and S0 acted as reductant and oxidant, respectively). As an important reductant, hydrogen atom (H•) can be generated from the reduction of H+ by MNZVI particles and participate in the formation of FeSx. Quenching experiment and cyclic voltammetry analysis proved the existence of H• on the surface of MNZVI particles. DFT calculation found that the potential barrier of H•/S0 and Fe0/S0 were 1.91 and 7.24 eV, respectively, indicating that S0 would preferentially react with H• instead of Fe0. The formed H• can quickly react with S0 to generate hydrogen sulfide (H2S), which can further react with iron oxides such as α-Fe2O3 on the surface of MNZVI particles to form FeSx. In addition, the H2 partial pressure in water significantly affected the amount of H• generated, thereby affecting the sulfidation efficiency. For TCE degradation, as the sulfur loading of sulfidated MNZVI particles increased, the contribution of H• significantly decreased while the contribution of direct electron transfer increased. This study provided new insights into the synthesis mechanism of sulfidated ZVI in water.

Preparation of Fe/Cu bimetals by ball milling iron powder and copper sulfate for trichloroethylene degradation: Combined effect of FeSx and Fe/Cu alloy.

The addition of a secondary metal (such as Cu, Co, Ni and Pd) to form iron-based bimetallic particles could enhance the reactivity of zero valent iron (ZVI). This study proposed a new synthesis method for preparing Cu-Fe bimetals (Cu-Febm (CuSO4)) by ball milling mZVI and CuSO4. During ball-milling process, 40% of Cu2+ can be reduced to Cu0, which formed galvanic couple with Fe0 in a way of Fe/Cu alloy structure. Part Cu2+ was only reduced to Cu+ (corresponding to Cu2O), while 29% of SO42- was reduced to Sx2- (corresponding to FeSx). The appearance of Cu2O was not conducive to the activity of Cu-Febm (CuSO4) particles, the formation of Fe0/FeSx structure compensated for the partial loss of Fe/Cu alloy. H•abs was identified as the main active species for TCE degradation by Cu-Febm (CuSO4) bimetals. The Cu-Febm (CuSO4) bimetals has great potential for the removal of chlorinated hydrocarbons in water.

Detection of Longitudinal Ganglion Cell/Inner Plexiform Layer Change: Comparison of Two Spectral-Domain Optical Coherence Tomography Devices.

PURPOSE: We compared rates of change of macular ganglion cell/inner plexiform (GCIPL) thickness and proportion of worsening and improving rates from 2 optical coherence tomography (OCT) devices in a cohort of eyes with glaucoma. DESIGN: Longitudinal cohort study. METHODS: In a tertiary glaucoma clinic we evaluated 68 glaucoma eyes with ≥2 years of follow-up and ≥4 OCT images. Macular volume scans from 2 OCT devices were exported, coregistered, and segmented. Global and sectoral GCIPL data from the central 4.8 × 4.0-mm region were extracted. GCIPL rates of change were estimated with linear regression. Permutation analyses were used to control specificity with the 2.5 percentile cutoff point used to define "true" worsening. Main outcome measures included differences in global/sectoral GCIPL rates of change between 2 OCT devices and the proportion of negative vs positive rates of change (P < .05). RESULTS: Average (standard deviation) 24-2 visual field mean deviation, median (interquartile range) follow-up time, and number of OCT images were -9.4 (6.1) dB, 3.8 (3.3-4.2) years, and 6 (5-8), respectively. GCIPL rates of thinning from Spectralis OCT were faster (more negative) compared with Cirrus OCT; differences were significant in superonasal (P = .03) and superotemporal (P = .04) sectors. A higher proportion of significant negative rates was observed with Spectralis OCT both globally and in inferotemporal/superotemporal sectors (P < .04). Permutation analyses confirmed the higher proportion of global and sectoral negative rates of change with Spectralis OCT (P < .001). CONCLUSIONS: Changes in macular GCIPL were detected more frequently on Spectralis' longitudinal volume scans than those of Cirrus OCT. OCT devices are not interchangeable with regard to detection of macular structural progression.

Rhodium-Catalyzed 1,1-Hydroacylation of Thioacyl Carbenes with Alkynyl Aldehydes and Subsequent Cyclization.

A rhodium-catalyzed 1,1-hydroacylation of thioacyl carbenes with alkynyl and alkenyl aldehydes and subsequent 6- endo-trig/dig cyclization are realized, giving structurally diverse 4 H-thiopyran-4-ones and 2,3-dihydro-4 H-thiopyran-4-ones in moderate to good yields. The oxidative addition of Rh(I) to aldehydes is proposed to be the turnover-limiting step. Manipulations of estrones demonstrate the applications of our formal (3 + 3) transannulations in the structural modifications of natural products.

High Activity and Convenient Ratio Control: DNA-Directed Coimmobilization of Multiple Enzymes on Multifunctionalized Magnetic Nanoparticles.

The development of new methods for fabricating artificial multienzyme systems has attracted much interest because of the potential applications and the urgent need for multienzyme catalysts. Controlling the enzyme ratio is critical for improving the cooperative enzymatic activity in multienzyme systems. Herein, we introduce a versatile strategy for fabricating a multienzyme system by coimmobilizing horseradish peroxidase (HRP) and glucose oxidase (GOx) on magnetic nanoparticles multifunctionalized with dopamine derivatives through DNA-directed immobilization. This multienzyme system exhibited precise enzyme ratio control, high catalytic efficiency, magnetic retrievability, and enhanced stability. The enzyme ratio was conveniently adjusted, as required, by regulating the quantity of functional groups on the multifunctionalized nanoparticles. The optimal mole ratio of GOx/HRP was 2:1. The Michaelis constant Km and specificity constant (kcat/Km, where kcat is the catalytic rate constant) of the multienzyme system were 1.41 mM and 5.02 s-1 mM-1, respectively, which were approximately twice the corresponding values of free GOx&HRP. The increased bioactivity of the multienzyme system was ascribed to the colocalization of the involved enzymes and the promotion of DNA-directed immobilization. Given the wide variety of possible enzyme associations and the high efficiency of this strategy, we believe that this work provides a new route for the fabrication of artificial multienzyme systems and can be extended for a wide range of applications in diagnosis, biomedical devices, and biotechnology.

Tertiary amine-catalyzed and direct synthesis of α-chloroalkanesulfonylhydrazines from azodicarboxylates and sulfonyl chlorides.

Chloroalkanesulfonylhydrazines were synthesized directly and efficiently from various alkanesulfonyl chlorides and dialkyl azodicarboxylates under the catalysis of tertiary amines. Tertiary amines serve as both bases and nucleophiles to dehydrochlorinate alkanesulfonyl chlorides to afford sulfenes. They then nucleophilically attack azodicarboxylates to yield zwitterionic intermediates, which nucleophilically attack sulfenes followed by intramolecular nucleophilic displacement and intermolecular chloride substitution to give rise to the final dialkyl α-chloroalkanesulfonylhydrazine-1,2-dicarboxylates. The proposed method provides a new and mild strategy for direct preparation of α-chloroalkanesulfonyl derivatives without other chloride resource, removing the complications incurred in traditional methods.

Wound healing effects of noni (Morinda citrifolia L.) leaves: a mechanism involving its PDGF/A2A receptor ligand binding and promotion of wound closure.

Morinda citrifolia L. (Rubiaceae) commonly known as noni, has been used in Polynesia by traditional healers for the treatment of cuts, bruises and wounds. Our objective was to investigate the wound-healing mechanisms of the noni leaf. The investigations of its wound-healing mechanisms were carried out using fresh noni leaf juice (NLJ), noni leaf ethanol extract (NLEE) and its methanol (MFEE) and hexane (HFEE) fractions on the PDGF and A(2A) receptors in vitro and topically in mice. Fresh noni leaf juice showed significant affinity to PDGF receptors, and displayed 166% binding inhibition of the ligand binding to its receptors, while at the same concentration, it only had 7% inhibition of the ligand binding to the A(2A) receptors. NLEE, HFEE and MFEE showed significant affinity to A(2A) receptors, concentration dependently, with IC(50) values of 34.1, 42.9 and 86.7 µg/mL, respectively. However, MFEE significantly increased wound closure and reduced the half closure time in mice with a CT(50) of 5.4 ± 0.2 days compared with control (p < 0.05). These results suggest that noni leaf significantly accelerated wound healing in mice via its ligand binding to the PDGF and A(2A) receptors as its probable mechanisms of wound-healing and also support its traditional usage for wound-healing in Polynesia.

Identification of major aroma compounds in the leaf of Morinda citrifolia Linn.

Morinda citrifolia, commonly named noni, has been used as food and as a folk medicine throughout the tropics. The use of the leaves to make hot water beverages is increasing in popularity, especially in Japan and the United States. To better understand the effects of processing on the content of the major aroma compounds, volatile oils were collected from samples of frozen, dried and roasted leaves by steam distillation and then analyzed by GC-MS. Drying of the leaves reduces the quantity of aroma compounds by more than half. Palmitic acid and E-phytol were identified as the major components of the volatile oil. With the exception of E-phytol, all of the known volatile compounds identified in the leaf samples were done so for the first time.

Lipoxygenase inhibitory constituents of the fruits of noni (Morinda citrifolia) collected in Tahiti.

A phytochemical study of the fruits of noni (Morinda citrifolia) collected in Tahiti led to the isolation of two new lignans, (+)-3,4,3',4'-tetrahydroxy-9,7'alpha-epoxylignano-7 alpha,9'-lactone (1) and (+)-3,3'-bisdemethyltanegool (2), as well as seven known compounds, (-)-pinoresinol (3), (-)-3,3'-bisdemethylpinoresinol (4), quercetin (5), kaempferol (6), scopoletin (7), isoscopoletin (8), and vanillin. The structures of 1 and 2 were determined by spectroscopic techniques. Compounds 3, 6, and 8 were isolated for the first time from noni fruit. Compounds 1-8 were shown to inhibit 5- and/or 15-lipoxygenase, with IC50 values ranging from 0.43 to 16.5 microM. Compound 5 exhibited weak inhibitory activity toward cyclooxygenase-2.

DNA damaging activities of methanol extract of Ajuga postii and iridoid glucoside reptoside.

An iridoid glucoside reptoside (1) has been isolated as a DNA damaging active agent by bioassay-guided fractionation of the methanol extract of Ajuga postii. Furthermore, from the acetone extract of A. postii two known triterpenic compounds ursolic acid, alpha-amyrin and two steroidal compounds (24S)-24-ethylcholesta-5,25-dien-3beta-ol and beta-sitosterol were isolated. Their structures were elucidated based on 1D and 2D NMR techniques and mass data.

New lupane triterpenoids from Solidago canadensis that inhibit the lyase activity of DNA polymerase beta.

Bioassay-directed fractionation of a methyl ethyl ketone extract of Solidago canadensis L. (Asteraceae), using an assay to detect the lyase activity of DNA polymerase beta, resulted in the isolation of the four new lupane triterpenoids 1-4 and the seven known compounds lupeol, lupeyl acetate, ursolic acid, cycloartenol, cycloartenyl palmitate, alpha-amyrin acetate, and stigmasterol. The structures of the new compounds were established as 3beta-(3R-acetoxyhexadecanoyloxy)-lup-20(29)-ene (1), 3beta-(3-ketohexadecanoyloxy)-lup-20(29)-ene (2), 3beta-(3R-acetoxyhexadecanoyloxy)-29-nor-lupan-20-one (3), and 3beta-(3-hetohexadecanoyloxy)-29-nor-lupan-20-one (4), respectively, on the basis of extensive 1D and 2D NMR spectroscopic interpretation and chemical modification studies. All 11 compounds were inhibitory to the lyase activity of DNA polymerase beta.

Cytotoxic and DNA damaging activity of some aporphine alkaloids from Stephania dinklagei.

Six aporphine alkaloids, liriodenine, corydine, isocorydine, atherospermidine, stephalagine and dehydrostephalagine, were isolated by bioassay-guided fractionation of the EtOH extract of the stems of Stephania dinklagei. Liriodenine showed strong cytotoxic activity while corydine and atherospermidine showed DNA damaging activity. Dehydrostephalagine and atherospermidine were isolated from this plant for the first time.

Studies on di- and triterpenoids from Salvia staminea with cytotoxic activity.

A new ursane-type triterpenoid, 3 beta,11 alpha,21 alpha-trihydroxyurs-12-ene, named salvistamineol (1), has been isolated from the methanol extract of Salvia staminea. In addition to 1, the methanol extract yielded four known compounds and the acetone extract yielded twelve known compounds consisting of two sesquiterpenes, six diterpenoids, a triterpenoid, two steroids and one flavone. DNA damaging properties of the extracts and some isolated diterpenes were investigated against three yeasts and only taxodione gave a positive response and also showed the highest cytotoxic activity against a panel of cell lines among the investigated compounds in this study.

Two new alkaloids of the crinane series from Pancratium sickenbergeri.

Two new alkaloids; ent-6alpha/6beta-hydroxybuphanisine, (-)-8-demethylmaritidine and seven known alkaloids were isolated from Pancratium sickenbergeri grown in Egypt. Three of the known alkaloids were tested in the NCI cytotoxicity screen, but were found to be inactive.

Some progress on the chemistry of natural bioactive terpenoids form Chinese medicinal plants

(1) Pseudolaric acids - Novel diterpenes, Pseudolaric acid A, B, C and D were isolated from Pseudolarix kaempferi Gorden (pinaceae). Their structures were assigned by spectroscopic data and chemical correlations. In the contineous studies, the absolute configurations, the conformations in the solutions, the framentation mechanisms of MS and assigments of all NMR spectral signals were also reported. They showed the antifungal and cytotoxic activities. (2) Daphnane diterpenes - In the further studies on the plants of Thymelaeaceae, besides 10 known diterpenes, 16 new daphnane diterpenes were isolated from Daphne genkwa, D. tangutica, D. giraldii, Wikstroemie chamaedaphne. They showed the antifertilities activities. (3) Tripterygium diterpenes 14 new diterpenes were isolated from Triperygium wilfordii, T. regeli and T. hypoglaucum. Some of them showed the antitumor activities. The CD spectra showed that A/B ring of all compoundshave trans configuration as same as tripdiolide and triptolide determined by X-ray diffraction (4) Pregnane glycosides from Marsdenia koi - Two new pregnane glycosides marsdenikoiside A and marsdenikoiside B which can terminate the early pregnancy were isolated from Marsdeia koi. Their structures were elucidated by hydrolysis and spectroscopic methods.