Design, synthesis, and biological evaluation of multiple F-18 S1PR1 radiotracers in rodent and nonhuman primate.

Here we report our design and synthesis of 28 new fluorine-containing compounds as potential F-18 radiotracers for CNS imaging of sphingosine-1-phosphate receptor 1 (S1PR1), and determination of their in vitro binding potency and selectivity toward S1PR1 over other S1PR subtypes. Nine potent and selective compounds, 7c&d, 9a&c, 12b, 15b, and 18a-c with IC50 values ranging from 0.6-12.3 nM for S1PR1 and weak binding toward S1PR2, 3, 4, and 5, were further 18F-radiolabeled to produce [18F]7c&d, [18F]9a&c, [18F]12b, [18F]15b, and [18F]18a-c. Multi-step F-18 radiochemistry procedures were investigated for radiosynthesis of [18F]7c&d and [18F]9a&c, and the presumed intermediates were synthesized and authenticated by analytic HPLC. We then performed nonhuman primate (NHP) PET brain imaging studies for eight radiotracers: [18F]7c&d, [18F]9a, [18F]12b, [18F]15b, and [18F]18a-c. Three radiotracers, [18F]7c, [18F]7d, and [18F]15b, had high NHP brain uptake with standardized uptake values (SUVs) at 2 h post-injection of 2.42, 2.84, and 2.00, respectively, and good brain retention. Our ex vivo biodistribution study in rats confirmed [18F]7d had a high brain uptake with no in vivo defluorination. Radiometabolic analysis of [18F]7c and [18F]7d in rat plasma and brain samples found that [18F]7c has a more favorable metabolic profile than [18F]7d. However, the trend of increased brain uptake precludes [18F]7c as a suitable PET radiotracer for imaging S1PR1 in the brain. Further structural optmization is warranted to identify a highly S1PR1-specific radiotracer with rapid brain uptake kinetics.

Quantitative Analysis of S1PR1 Expression in the Postmortem Multiple Sclerosis Central Nervous System.

Multiple sclerosis (MS) is an immune-mediated disease that is characterized by demyelination and inflammation in the central nervous system (CNS). Previous studies demonstrated that sphingosine-1-phosphate receptor (S1PR) modulators effectively inhibit S1PR1 in immune cell trafficking and reduce entry of pathogenic cells into the CNS. Studies have also implicated a nonimmune, inflammatory role of S1PR1 within the CNS in MS. In this study, we explored the expression of S1PR1 in the development and progression of demyelinating pathology of MS by quantitative assessment of S1PR1 expression using our S1PR1-specific radioligand, [3H]CS1P1, in the postmortem human CNS tissues including cortex, cerebellum, and spinal cord of MS cases and age- and sex-matched healthy cases. Immunohistochemistry with whole slide scanning for S1PR1 and various myelin proteins was also performed. Autoradiographic analysis using [3H]CS1P1 showed that the expression of S1PR1 was statistically significantly elevated in lesions compared to nonlesion regions in the MS cases, as well as normal healthy controls. The uptake of [3H]CS1P1 in the gray matter and nonlesion white matter did not significantly differ between healthy and MS CNS tissues. Saturation autoradiography analysis showed an increased binding affinity (Kd) of [3H]CS1P1 to S1PR1 in both gray matter and white matter of MS brains compared to healthy brains. Our blocking study using NIBR-0213, a S1PR1 antagonist, indicated [3H]CS1P1 is highly specific to S1PR1. Our findings demonstrated the activation of S1PR1 and an increased uptake of [3H]CS1P1 in the lesions of MS CNS. In summary, our quantitative autoradiography analysis using [3H]CS1P1 on human postmortem tissues shows the feasibility of novel imaging strategies for MS by targeting S1PR1.

Co-condensation with photoexcited cryptochromes facilitates MAC3A to positively control hypocotyl growth in Arabidopsis.

Cryptochromes (CRYs) are blue light receptors that mediate plant photoresponses through regulating gene expressions. We recently reported that Arabidopsis CRY2 could form light-elicited liquid condensates to control RNA methylation. However, whether CRY2 condensation is involved in other gene expression-regulatory processes remains unclear. Here, we show that MOS4-associated complex subunits 3A and 3B (MAC3A/3B) are CRY-interacting proteins and assembled into nuclear CRY condensates. mac3a3b double mutants exhibit hypersensitive photoinhibition of hypocotyl elongation, suggesting that MAC3A/3B positively control hypocotyl growth. We demonstrate the noncanonical activity of MAC3A as a DNA binding protein that modulates transcription. Genome-wide mapping of MAC3A-binding sites reveals that blue light enhances the association of MAC3A with its DNA targets, which requires CRYs. Further evidence indicates that MAC3A and ELONGATED HYPOCOTYL 5 (HY5) occupy overlapping genomic regions and compete for the same targets. These results argue that photocondensation of CRYs fine-tunes light-responsive hypocotyl growth by balancing the opposed effects of HY5 and MAC3A.

Characterization of a S1PR2 specific 11C-labeled radiotracer in streptozotocin-induced diabetic murine model.

BACKGROUND: Diabetes mellitus is a chronic progressive metabolic disorder that affects millions of people worldwide. Emerging evidence suggests the important roles of sphingolipid metabolism in diabetes. In particular, sphingosine-1-phosphate (S1P) and S1P receptor 2 (S1PR2) have important metabolic functions and are involved in several metabolic diseases. In diabetes, S1PR2 can effectively preserve ß cells and improve glucose/insulin tolerance in high-fat diet induced and streptozotocin (STZ)-induced diabetic mouse models. We previously developed a group of potent and selective S1PR2 ligands and radioligands. METHODS: In this study, we continued our efforts and characterized our leading S1PR2 radioligand, [11C]TZ34125, in a STZ-induced diabetic mouse model. [11C]TZ34125 was radiosynthesized in an automated synthesis module and in vitro saturation binding assay was performed using recombinant human S1PR2 membrane. In vitro saturation autoradiography analysis was also performed to determine the binding affinity of [11C]TZ34125 against mouse tissues. Type-1 diabetic mouse model was developed following a single high dose of STZ in C57BL/6 mice. Ex vivo biodistribution was performed to evaluate the distribution and amount of [11C]TZ34125 in tissues. In vitro autoradiography analysis was performed to compare the uptake of [11C]TZ34125 between diabetic and control animals in mouse spleen and pancreas. RESULTS: Our in vitro saturation binding assay using [11C]TZ34125 confirmed [11C]TZ34125 is a potent radioligand to recombinant human S1PR2 membrane with a Kd value of 0.9 nM. Saturation autoradiographic analysis showed [11C]TZ34125 has a Kd of 67.5, 45.9, and 25.0 nM to mouse kidney, spleen, and liver tissues respectively. Biodistribution study in STZ-induced diabetic mice showed the uptake of [11C]TZ34125 was significantly elevated in the spleen (~2 fold higher) and pancreas (~1.4 fold higher) compared to normal controls. The increased uptake of [11C]TZ34125 was further confirmed using autoradiographic analysis in the spleen and pancreases of STZ-induced diabetic mice, indicating S1PR2 can potentially act as a biomarker of diabetes in pancreases and inflammation in spleen. Future mechanistic analysis and in vivo quantitative assessment using non-invasive PET imaging in large animal model of diabetes is worthwhile. CONCLUSIONS: Overall, our data showed an increased uptake of our lead S1PR2-specific radioligand, [11C]TZ34125, in the spleen and pancreases of STZ-induced diabetic mice, and demonstrated [11C]TZ34125 has a great potential for preclinical and clinical usage for assessment of S1PR2 in diabetes and inflammation.

Discovery of a Promising Fluorine-18 Positron Emission Tomography Radiotracer for Imaging Sphingosine-1-Phosphate Receptor 1 in the Brain.

Sphingosine-1-phosphate receptor 1 (S1PR1) is recognized as a novel therapeutic and diagnostic target in neurological disorders. We recently transferred the S1PR1 radioligand [11C]CS1P1 into clinical investigation for multiple sclerosis. Herein, we reported the design, synthesis and evaluation of novel F-18 S1PR1 radioligands. We combined the structural advantages of our two lead S1PR1 radioligands and synthesized 14 new S1PR1 compounds, then performed F-18 radiochemistry on the most promising compounds. Compound 6h is potent (IC50 = 8.7 nM) and selective for S1PR1. [18F]6h exhibited a high uptake in macaque brain (SUV > 3.0) and favorable brain washout pharmacokinetics in positron emission tomography (PET) study. PET blocking and displacement studies confirmed the specificity of [18F]6h in vivo. Radiometabolite analysis confirmed no radiometabolite of [18F]6h entered into the brain to confound the PET measurement. In summary, [18F]6h is a promising radioligand to image S1PR1 and worth translational clinical investigation for humans with brain disorders.

Study on a novel omnidirectional ultrasonic cavitation removal system for Microcystis aeruginosa.

Microcystis aeruginosa, as a typical alga, produces microcystin with strong liver toxicity, seriously endangering the liver health of human and animals. Inhibiting the bloom of the Microcystis aeruginosa in lakes becomes a significant and meaningful work. Ultrasonic cavitation is currently considered to be the most environmentally friendly and effective method for the removal of Microcystis aeruginosa. However, the commercialized ultrasonic algae removal systems require multi-Langevin transducers to achieve omnidirectional ultrasonic irradiation due to the single irradiation direction of the Langevin transducer, resulting in the complex design and high energy consumption. To achieve a low-cost, simple structure, and high-efficiency algae removal system, a novel omnidirectional ultrasonic cavitation removal system for Microcystis aeruginosa is proposed. The proposed system is major composed of a novel omnidirectional ultrasonic transducer, which generates the omnidirectional ultrasonic irradiation by its shaking-head motion coupled by two orthogonal bending vibration modes. Modal simulation, sound field simulation, and cavitation bubble radius simulation are first carried out to optimize the geometric sizes of the proposed transducer and verify the correctness of the omnidirectional ultrasonic irradiation principle. Then the vibration characteristics of the transducer prototype are measured by vibration tests and impedance tests. Finally, the feasibility and effectiveness of the proposed omnidirectional ultrasonic removal system for Microcystis aeruginosa are evaluated through the algae removal experiments. The experimental results exhibit that the algal cells damaged by ultrasonic irradiation from the proposed system do not have the ability to self-repair. In addition, the algal removal rates reached 55.41% and 72.97% after 30 min of ultrasonic treatment when the corresponding ultrasonic densities are 0.014 W/mL and 0.021 W/mL, respectively. The proposed omnidirectional ultrasonic algae removal system significantly simplifies the configuration and reduces energy consumption, presenting the potential promise of algae removal and environmental protection.

Common Ancestry Is a Poor Predictor of Competitive Traits in Freshwater Green Algae.

Phytoplankton species traits have been used to successfully predict the outcome of competition, but these traits are notoriously laborious to measure. If these traits display a phylogenetic signal, phylogenetic distance (PD) can be used as a proxy for trait variation. We provide the first investigation of the degree of phylogenetic signal in traits related to competition in freshwater green phytoplankton. We measured 17 traits related to competition and tested whether they displayed a phylogenetic signal across a molecular phylogeny of 59 species of green algae. We also assessed the fit of five models of trait evolution to trait variation across the phylogeny. There was no significant phylogenetic signal for 13 out of 17 ecological traits. For 7 traits, a non-phylogenetic model provided the best fit. For another 7 traits, a phylogenetic model was selected, but parameter values indicated that trait variation evolved recently, diminishing the importance of common ancestry. This study suggests that traits related to competition in freshwater green algae are not generally well-predicted by patterns of common ancestry. We discuss the mechanisms by which the link between phylogenetic distance and phenotypic differentiation may be broken.

Effect of different acclimation methods on the performance of microbial fuel cells using phenol as substrate.

Single-chamber microbial fuel cells (MFCs) with air-cathode were constructed. MFCs were fed different feedstocks during their inoculation, their role on phenol degradation and MFC performance were investigated. The results showed that the MFC inoculated using glucose exhibited the highest power density (31.3 mW m(-2)) when phenol was used as the sole substrate for MFC. The corresponding biodegradation kinetic constant was obtained at 0.035 h(-1), at an initial phenol concentration of 600 mg L(-1). Moreover, the phenol degradation rates in this MFC with closed circuit were 9.8-16.5% higher than those in MFC with opened circuit. The cyclic voltammograms revealed a different electrochemical activity of the anode biofilms in the MFC, and this led to differences in performance of the MFCs with phenol as sole substrate. These results demonstrated that phenol degradation and power production are affected by current generation and type of acclimation.

Construction and operation of microbial fuel cell with Chlorella vulgaris biocathode for electricity generation.

In this study, a modified microbial fuel cell (MFC) with a tubular photobioreactor (PHB) configuration as a cathode compartment was constructed by introducing Chlorella vulgaris to the cathode chamber used to generate oxygen in situ. Two types of cathode materials and light/dark cycles were used to test the effect on MFC with algae biocathode. Results showed that the use of algae is an effective approach because these organisms can act as efficient in situ oxygenators, thereby facilitating the cathodic reaction. Dissolved oxygen and voltage output displayed a clear light positive response and were drastically enhanced compared with the abiotic cathode. In particular, carbon paper-coated Pt used as a cathode electrode increased voltage output at a higher extent than carbon felt used as an electrode. The maximum power density of 24.4 mW/m(2) was obtained from the MFC with algae biocathode which utilized the carbon paper-coated Pt as the cathode electrode under intermittent illumination. This density was 2.8 times higher than that of the abiotic cathode. Continuous illumination shortened the algal lifetime. These results demonstrated that intermittent illumination and cathode material-coated catalyst are beneficial to a more efficient and prolonged operation of MFC with C. vulgaris biocathode.

Electrophoretic deposition of multi-walled carbon nanotube on a stainless steel electrode for use in sediment microbial fuel cells.

Sediment microbial fuel cells (SMFCs) could be used as power sources and one type of new technology for the removal of organic matters in sediments. In order to improve electrode materials and enhance their effect on the performance, we deposited multi-walled carbon nanotube (MWNT) on stainless steel net (SSN). Electrophoretic deposition technique as a method with low cost, process simplicity, and thickness control was used for this electrode modification and produced this novel SSN-MWNT electrode. The performances of SMFCs with SSN-MWNT as electrode were investigated. The results showed that the maximum power density of SMFC with SSN-MWNT cathode was 31.6 mW m(-2), which was 3.2 times that of SMFC with an uncoated stainless steel cathode. However, no significant increase in the maximum power density of SMFC with SSN-MWNT anode was detected. Further electrochemical analysis showed that when SSN-MWNT was used as the cathode, the cathodic electrochemical activity and oxygen reduction rate were significantly improved. This study demonstrates that the electrophoretic deposition of carbon nanotubes on conductive substrate can be applied for improving the performance of SMFC.

Construction and operation of microbial fuel cell with Chlorella vulgaris biocathode for electricity generation.

In this study, a modified microbial fuel cell (MFC) with a tubular photobioreactor (PHB) configuration as a cathode compartment was constructed by introducing Chlorella vulgaris to the cathode chamber used to generate oxygen in situ. Two types of cathode materials and light/dark cycles were used to test the effect on MFC with algae biocathode. Results showed that the use of algae is an effective approach because these organisms can act as efficient in situ oxygenators, thereby facilitating the cathodic reaction. Dissolved oxygen and voltage output displayed a clear light positive response and were drastically enhanced compared with the abiotic cathode. In particular, carbon paper-coated Pt used as a cathode electrode increased voltage output at a higher extent than carbon felt used as an electrode. The maximum power density of 24.4 mW/m2 was obtained from the MFC with algae biocathode which utilized the carbon paper-coated Pt as the cathode electrode under intermittent illumination. This density was 2.8 times higher than that of the abiotic cathode. Continuous illumination shortened the algal lifetime. These results demonstrated that intermittent illumination and cathode material-coated catalyst are beneficial to a more efficient and prolonged operation of MFC with C. vulgaris biocathode.