RESUMO
The architecture of electrodes plays a pivotal role in the transfer and transportation of charges during electrochemical reactions. Selecting optimal electrode materials and devising well-conceived electrode structures can substantially enhance the electrochemical performance of devices. This manuscript leverages 3D printing technology to fabricate asymmetric supercapacitor devices featuring regular layered configurations. By investigating the impact of various materials on the internal architecture of printed electrodes, we establish a stratified electrode structure with an orderly arrangement, thereby significantly improving asymmetric charge transfer between electrodes. The application of 3D printing technology to construct electrode structures effectively mitigates the agglomeration of electrode materials. The 3D-printed VCG//MXene devices demonstrate exceptional areal capacitance (205.57 mF cm-2) and energy density (60.03 µWh cm-2), with a power density of 0.174 W cm-2. Consequently, selecting appropriate materials for fabricating printable electrode structures and achieving efficient 3D printing is anticipated to offer novel insights into the construction and enhancement of miniature asymmetric micro-supercapacitor (MSCs) devices.
RESUMO
Exploring new carbon-based electrode materials is quite necessary for enhancing capacitive deionization (CDI). Here, hollow mesoporous carbon spheres (HMCSs)/metal-organic frameworks (MOFs) derived carbon materials (NC(M)/HMCSs and NC(M)@HMCSs) are successfully prepared by interface-coating and space-encapsulating design, respectively. The obtained NC(M)/HMCSs and NC(M)@HMCSs possess a hierarchical hollow nanoarchitecture with abundant nitrogen doping, high specific surface area, and abundant meso-/microporous pores. These merits are conducive to rapid ion diffusion and charge transfer during the adsorption process. Compared to NC(M)/HMCSs, NC(M)@HMCSs exhibit superior electrochemical performance due to their better utilization of the internal space of hollow carbon, forming an interconnected 3D framework. In addition, the introduction of Ni ions is more conducive to the synergistic effect between ZIF(M)-derived carbon and N-doped carbon shell compared with other ions (Mn, Co, Cu ions). The resultant Ni-1-800-based CDI device exhibits excellent salt adsorption capacity (SAC, 37.82 mg g-1) and good recyclability. This will provide a new direction for the MOF nanoparticle-driven assembly strategy and the application of hierarchical hollow carbon nanoarchitecture to CDI.
RESUMO
Metal-organic frameworks (MOFs) are considered as a promising candidate for advancing energy storage owing to their intrinsic multi-channel architecture, high theoretical capacity, and precise adjustability. However, the low conductivity and poor structural stability lead to unsatisfactory rate and cycling performance, greatly hindering their practical application. Herein, we propose a sea urchin-like Co-ZIF-L superstructure using molecular template to induce self-assembly followed by ion exchange method, which shows improved conductivity, successive channels, and high stability. The ion exchange can gradually etch the superstructure, leading to the reconstruction of Co-ZIF-L with three-dimensional (3D) cross-linked ultrathin porous nanosheets. Moreover, the precise control of Co to Ni ratios can construct effective micro-electric field and synergistically enhance the rapid transfer of electrons and electrolyte ions, improving the conductivity and stability of CoNi-ZIF-L. The Co6.53Ni-ZIF-L electrode exhibits a high specific capacity (602â F g-1 at 1â A g-1) and long cycling stability (95.3 % retention after 4,000 cycles at 5â A g-1). The Co6.53Ni-ZIF-L//AC asymmetric flexible supercapacitor employing gel electrolyte also exhibits excellent cycling stability (93.3 % retention after 4000 cycles at 5â A g-1). This discovery provides valuable insights for electrode material selection and energy storage efficiency improvement.
RESUMO
Polymetallic phosphides exhibit favorable conductivities. A reasonable design of nano-metal-organic frame (MOF) composite morphologies and in situ introduction of polymetallic phosphides into the framework can effectively improve electrolyte penetration and rapid electron transfer. To address existing challenges, Ni, with a strong coordination ability with N, is introduced to partially replace Co in nano-Co-MOF composite. The hollow nanostructure is stabilized through CoNi bimetallic coordination and low-temperature controllable polymetallic phosphide generation rate. The Ni, Co, and P atoms, generated during reduction, effectively enhance electron transfer rate within the framework. X-ray absorption fine structure (XAFS) characterization results further confirm the existence of Ni-N, Ni-Ni, and Co-Co structures in the nanocomposite. The changes in each component during the charge-discharge process of the electrochemical reactions are investigated using in situ X-ray diffraction (XRD). Theoretical calculations further confirm that P can effectively improve conductivity. VZNPGC//MXene MSCs, constructed with active materials derived from the hollow nano MOF composites synthesized through the Ni2+ stabilization strategy, demonstrate a specific capacitance of 1184 mF cm-2, along with an energy density of 236.75 µWh cm-2 (power density of 0.14 mW cm-2). This approach introduces a new direction for the synthesis of highly conductive nano-MOF composites.
RESUMO
The unique superstructures electrode materials are of dominant significance for improving the performance of aqueous zinc-ion batteries (AZIBs). In this work, using nano MIL-96 (Al) as the precursor, a series of the layered (AlO)2OH·VO3 composite superstructures with different morphologies and V-oxide contents were prepared by combining calcination and hydrothermal synthesis. Among which, the HBC650·V4 superstructure is composed of the amorphous Al2O3/C, V-oxide, and the fluffy structure of (AlO)2OH, thus the superstructure can enhance the stability, increase the active center, and shorten Zn2+ diffusion, respectively. It is commendable that, the HBC650·V4 superstructure exhibits a high specific capacity of 180.1 mAh·g-1 after 300 cycles at 0.5 A·g-1. Furthermore, the capacity retention can be as high as 99.6 % after 5000 cycles at a high current density of 5.0 A·g-1, showing superior long cycling stability. Importantly, the in-situ XRD patterns and ex-situ analysis revealed the structural changes and reaction mechanisms of the HBC650·V4 superstructure during Zn2+ insertion/extraction. Therefore, the HBC650·V4 superstructure prepared using Al-MOF exhibits the advanced AZIBs performance. The preparation of nano-MOF into multifunctional superstructures through innovative strategies will be development trend in this field, which opens a new way to design AZIBs cathode materials.
RESUMO
In this study, we introduce a novel approach for synthesizing two-dimensional (2D) MXene heterostructures featuring a sandwiched and cross-linked network structure. This method addresses the common issue of activity degradation in 2D nanomaterials caused by inevitable aggregation. By utilizing the distinct surface characteristics of MXene, we successfully induced the growth of various 2D nanomaterials on MXene substrates. This strategy effectively mitigates self-stacking defects and augments the exposure of surface areas. In particular, the obtained 2D-2D MXene@NiCo-layered double hydroxide (MH-NiCo) heterostructures exhibit enhanced structural stability, improved chemical reversibility, and heightened charge transfer efficiency, outperforming pure NiCo LDH. The aqueous MH-Ni4Co1//Zn@carbon cloth (MH-Ni4Co1//Zn@CC) battery demonstrates exceptional performance with a remarkable specific capacity of 0.61â mAh cm-2, maintaining 96.6 % capacitance after 2300â cycles. Additionally, it achieves an energy density of 1.047â mWh cm-2 and a power density of 32.899â mW cm-2. This research not only paves the way for new design paradigms in energy-related nanomaterials but also offers invaluable insights for the application and optimization of 2D-2D heterostructures in advanced electrochemical devices.
RESUMO
This work reports that a low-temperature thermal calcination strategy was adopted to modulate the electronic structure and attain an abundance of surface-active sites while maintaining the crystal morphology. All the experiments demonstrate that the new photocatalyst nano MIL-125(Ti)-250 obtained by thermal calcination strategy has abundant Ti3+ induced by oxygen vacancies and high specific surface area. This facilitates the adsorption and activation of N2 molecules on the active sites in the photocatalytic nitrogen fixation. The photocatalytic NH3 yield over MIL-125(Ti)-250 is enhanced to 156.9â µmol g-1 h-1 , over twice higher than that of the parent MIL-125(Ti) (76.2â µmol g-1 h-1 ). Combined with density function theory (DFT), it shows that the N2 adsorption pattern on the active sites tends to be from "end-on" to "side-on" mode, which is thermodynamically favourable. Moreover, the electrochemical tests demonstrate that the high atomic ratio of Ti3+ /Ti4+ can enhance carrier separation, which also promotes the efficiency of photocatalytic N2 fixation. This work may offer new insights into the design of innovative photocatalysts for various chemical reduction reactions.
RESUMO
2D metal-organic frameworks-based (2D MOF-related) materials benefit from variable topological structures, plentiful open active sites, and high specific surface areas, demonstrating promising applications in gas storage, adsorption and separation, energy conversion, and other domains. In recent years, researchers have innovatively designed multiple strategies to avoid the adverse effects of conventional methods on the synthesis of high-quality 2D MOFs. This review focuses on the latest advances in creative synthesis techniques for 2D MOF-related materials from both the top-down and bottom-up perspectives. Subsequently, the strategies are categorized and summarized for synthesizing 2D MOF-related composites and their derivatives. Finally, the current challenges are highlighted faced by 2D MOF-related materials and some targeted recommendations are put forward to inspire researchers to investigate more effective synthesis methods.
RESUMO
In order to break through the surface analysis of the content structure of policy texts, an in-depth discussion of the linkage between regional policy makers and objectives is helpful to analyze the formation mechanism of policy effects. Through social network analysis and multi-index analysis, this study takes the QianwanNew Area of Ningbo and the Guangdong-Hong Kong-Macao Greater Bay Area as representatives to explore the policy framework for the sustainable development of manufacturing industry in the two bay areas respectively. Through the construction of government department cooperation network, policy keyword co-occurrence network, department keyword correlation network, and the analysis of network density, network centrality, structural holes, and cohesive subgroups, it is found that the impact results show great differences, which is related to the network structure of manufacturing policy text.
Assuntos
Desenvolvimento Econômico , Desenvolvimento Sustentável , Hong Kong , Macau , Políticas , ChinaRESUMO
The effects of near surface or surface mechanisms on electrochemical performance (lower specific capacitance density) hinders the development of 3D printed micro supercapacitors (MSCs). The reasonable internal structural characteristics of printed electrodes and the appropriate intercalation material can effectively compensate for the effects of surface or near-surface mechanisms. In this study, a layered structure is constructed inside an electrode using an ink with liquid-crystal characteristics, and the pore structure and oxidation active sites of the layered electrode are optimized by controlling the amount of Co3 O4 -quantum dots (Co3 O4 QDs). The Co3 O4 QDs are distributed in the pores of the electrode surface, and the insertion of Co3 O4 QDs can effectively compensate for the limitations of surface or near-surface mechanisms, thus effectively improving the pseudocapacitive characteristics of the 3D-printed MSCs. The 3D printed MSC exhibits a high area capacitance (306.13 mF cm-2 ) and energy density (34.44 µWh cm-2 at a power density of 0.108 mW cm-2 ). Therefore, selecting the appropriate materials to construct printable electrode structures and effectively adjusting material ratios for efficient 3D printing are expected to provide feasible solutions for the construction of various high-energy storage systems such as MSCs.
RESUMO
BACKGROUND: The relationship between migraine and breast cancer risk has generated conflicting findings. We attempted to assess the association between migraine and breast cancer risk using Mendelian randomization (MR) analysis. METHODS: We selected genetic instruments associated with migraine from a recently published genome-wide association studies (GWAS). Inverse variant weighted (IVW) analysis was adopted as the main method, and we also performed the weighted-median method and the MRâEgger, MR pleiotropy residual sum and outlier (MR-PRESSO), and MR Robust Adjusted Profile Score (MR-RAPS) methods as supplements. RESULTS: Our MR suggested that any migraine (AM) was a risk factor for overall breast cancer (IVW: odds ratio (OR) = 1.072, 95% confidence intervals (CI) = 1.035-1.110, P = 8.78 × 10- 5, false discovery rate (FDR) = 7.36 × 10- 4) and estrogen receptor-positive (ER+) breast cancer (IVW: OR = 1.066, 95% CI = 1.023-1.111, P = 0.0024; FDR = 0.0108) but not estrogen receptor-negative (ER-) breast cancer. In its subtype analysis, women with a history of migraine without aura (MO) had an increased risk of ER- breast cancer (IVW: OR = 1.089, 95% CI = 1.019-1.163, P = 0.0118, FDR = 0.0354), and MO was suggestively associated with the risk of overall breast cancer (FDR > 0.05 and IVW P < 0.05). No significant heterogeneity or horizontal pleiotropy was found in the sensitivity analysis. CONCLUSION: This study suggested that women with AM have an increased risk of overall breast cancer and ER + breast cancer. MO was suggestively associated with the risk of overall breast cancer and ER- breast cancer.
Assuntos
Neoplasias da Mama , Transtornos de Enxaqueca , Feminino , Humanos , Neoplasias da Mama/epidemiologia , Neoplasias da Mama/genética , Estudo de Associação Genômica Ampla , Análise da Randomização Mendeliana , Mama , Transtornos de Enxaqueca/complicações , Transtornos de Enxaqueca/genéticaRESUMO
Chloroplast clustering around the nucleus is a well-known mechanism that occurs in response to various biotic and abiotic stresses and is believed to be a mechanism of defence against pathogens in plants. This phenomenon is accompanied by increased production of reactive oxygen species (ROS), which can help to destroy invading pathogens. However, the function of chloroplast clustering during viroid infection is unclear. Here, we report that, although the infection by potato spindle tuber viroid (PSTVd) failed to induce chloroplast clustering, chloroplast clustering caused by the overexpression of the Nicotiana benthamiana chloroplast outer membrane protein 24 (NbOMP24) promoted the infection by PSTVd, a viroid pathogen, in N. benthamiana. Interestingly, H2 O2 treatment, which caused increased ROS accumulation, showed no significant effects on PSTVd infection. Moreover, NbOMP24 protein showed no direct interaction with PSTVd. We propose that perinuclear chloroplast clustering induced by NbOMP24 provides a favourable environment for PSTVd infection. These findings highlight the complexity of chloroplast clustering-mediated plant-pathogen interactions and the need for further research to fully understand these mechanisms.
Assuntos
Nicotiana , Viroides , Nicotiana/genética , Nicotiana/metabolismo , Espécies Reativas de Oxigênio/metabolismo , Viroides/genética , RNA Viral/metabolismo , Doenças das PlantasRESUMO
Limited research has been conducted on porcine miR-155 promoters, and previous study from our group have identified two haplotypes (TT and CC) in different pig breeds, each associated with five fully linked mutation sites within or near the miR-155 gene (Li et al. Dev Comp Immunol 39(1):110-116, 2013). In this study, the promoter region of porcine miR-155 was screened, and two important transcription factors, Foxp3 and RelA, were identified. The binding ability of Foxp3 protein was found to be affected by the first mutation site (A/C) using EMSA analysis. In vitro experiments revealed that the expression level of miR-155 was significantly higher in the C haplotype compared to the T haplotype. Additionally, northern blotting assays indicated that both the first mutation site (A/C) and the fourth mutation site (G/T) had a significant impact on miR-155 expression levels. These findings provide further insights into the transcriptional regulation of porcine miR-155 and identify crucial mutation sites that influence miR-155 expression. This knowledge can serve as a basis for identifying potential molecular markers associated with disease resistance in swine.
RESUMO
The limited active sites and poor acid-alkaline solution stability of metal-organic frameworks (MOFs), significantly limit their wider application. In this study, the acid property of tannic acid (TA) was used as an etchant to etch the surface-active sites. Subsequently, the further chelation of the protonated TA with the exposed metal active site can effectively protect the metal ions. Meanwhile, the TA provided a large amount of phenolic hydroxyl groups, which can greatly improve the stability of imidazolate-coordinated MOFs. The electrochemical test results indicated that the MOFs composite materials synthesized using this scheme had high specific capacitance and stability. And the mechanism of its electrochemical reaction process was explored through in situ X-ray diffraction (XRD) and theoretical calculations. In addition, the same treatment was carried out through a series of carboxyl-coordinated MOFs, which further confirmed the principle of this scheme to obtain a higher active site and stability. This paper explains the mechanism of functionalization of nano-MOFs by polyphenolic compounds, providing new ideas for the research of nano-MOFs.
RESUMO
BACKGROUND: Diabetic nephropathy (hereinafter referred to as DN) is one of the important causes of chronic renal failure, with great harm. We aimed to elucidate the role of transgelin-2, a key early detection for diabetic ne-phropathy. METHOD: The serum samples of 12 DN patients and 12 normal volunteers were collected for this experiment. Mice of the model group were injected intraperitoneally with streptozotocin following a high fat diet. Mouse podocyte (MPC5) cells were induced with 20 mmol/L d-glucose. RESULT: Transgelin-2 was highly expressed in DN patients with diabetic nephropathy both at the expression levels of mRNA and protein. Transgelin-2 expression was correlated with blood sugar in patients with DN. Transgelin-2 gene up-regulation enhanced inflammation and periostin levels, and reduced E-cadherin activity level in mice with DN. Over-expression of transgelin-2 increased inflammation and periostin levels, and reduced E-cadherin activity level in the in vitro model. Down-regulation of Transgelin-2 reduced inflammation and periostin levels and induced E-cadherin activity level in the in vitro model. Transgelin-2 induced ANXA2/ STAT3 signaling in a mouse model or an in vitro model. ANXA2 was one of the regulatory factors for the effects of transgelin-2 with inflammation, periostin, and E-cadherin in a model of DN. CONCLUSIONS: Taken together, these findings demonstrated that transgelin-2 promoted inflammation and periostin levels, and suppressed E-cadherin levels in DN by STAT3 signaling through ANXA2.
Assuntos
Diabetes Mellitus , Nefropatias Diabéticas , Podócitos , Camundongos , Animais , Caderinas/genética , Caderinas/metabolismo , Caderinas/farmacologia , Transdução de Sinais , Inflamação/metabolismo , Podócitos/metabolismoRESUMO
An isolate of chilli veinal mottle virus (ChiVMV; genus Potyvirus) of Solanum nigrum L. from southwest China (ChiVMV-YunN/Yuxi) was identified and sequenced (GenBank: OP404087). Comparison with other ChiVMV isolates and recombination analyses suggested a recombinant origin. The most significant recombination event among all 21 complete ChiVMV isolates was an ending breakpoint at 1408-1488 for ChiVMV-YunN/Yuxi with ChiVMV-TaiW and ChiVMV-YunN/Ca operating as the respective major and minor parents. Interestingly, the 5' UTR of ChiVMV-YunN/Yuxi is 15 nucleotides ('AAAAATAAAACAACC') longer than other reported isolates. A full-length clone of ChiVMV-YunN/Yuxi was constructed and was shown to be infectious in Nicotiana benthamiana. The additional 15 nt of 5' UTR in ChiVMV-YunN/Yuxi was stable when transmitted through three generations. Experiments with modified clones showed that the additional 15 nt are essential for infection by this isolate.
Assuntos
Potyvirus , Solanum nigrum , Regiões 5' não Traduzidas , China , Doenças das PlantasRESUMO
Pepper mild mottle virus (PMMoV) is a devastating viral pathogen of pepper (Capsicum annuum) but it is unclear whether and how peppers protect against PMMoV infection. The expression of the chloroplast outer membrane protein 24 (OMP24) of C. annuum was upregulated under PMMoV infection and it interacted with PMMoV coat protein (CP). Silencing of OMP24 in either C. annuum or Nicotiana benthamiana facilitated PMMoV infection, whereas overexpression of N. benthamiana OMP24 in transgenic plants inhibited PMMoV infection. Both C. annuum OMP24 (CaOMP24) and N. benthamiana OMP24 (NbOMP24) localized to the chloroplast and have a moderately hydrophobic transmembrane domain that is necessary for their localization. Overexpression of CaOMP24 induced stromules, perinuclear chloroplast clustering, and accumulation of reactive oxygen species (ROS), the typical defense responses of chloroplasts transferring the retrograde signaling to the nucleus to regulate resistance genes. The expression of PR1 and PR2 was also upregulated significantly in plants overexpressing OMP24. Self-interaction of OMP24 was demonstrated and was required for OMP24-mediated plant defense. Interaction with PMMoV CP interfered with the self-interaction of OMP24 and impaired OMP24-induced stromules, perinuclear chloroplast clustering and ROS accumulation. The results demonstrate the defense function of OMP24 in pepper during viral infection and suggest a possible mechanism by which PMMoV CP modulates the plant defense to facilitate viral infection.
RESUMO
Background: Several observational studies have explored the relationships between multiple sclerosis (MS) and breast cancer; however, whether an association exists remains unknown. Methods: We conducted a meta-analysis of observational studies and Mendelian randomization (MR) based on genetic variants to identify the relationship between MS and breast cancer. The observational studies were searched from PubMed, Embase, Web of Science, and Scopus to assess the relationship between MS and breast cancer from inception to 07 Nov 2022. Moreover, we explored the association between genetically pre-disposed MS and breast cancer risk based on an MR study. The summary analysis for MS from two separate databases [International Multiple Sclerosis Genetics Consortium (IMSGC), FinnGen] and the summary analysis for breast cancer from Breast Cancer Association Consortium. Results: Fifteen cohort studies involving 173,565 female MS patients were included in this meta-analysis. The correlation between MS and breast cancer was not statistically significant [relative ratio (RR) = 1.08, 95% confidence interval (CI) = 0.99-1.17]. In the MR analysis, we did not observe causal associations of genetically determined MS with breast cancer and its subtypes from both the IMSGC and FinnGen datasets. Conclusion: The meta-analysis of observational and MR based on genetic variants does not support the correlation between MS and breast cancer.
RESUMO
Objective: Enhanced Recovery after Surgery (ERAS) protocol has been developed and practiced for various surgical procedures to improve outcomes in the postoperative period. We hereby present our experience of ERAS for a large cohort of patients undergoing total joint arthroplasty (TJA). Methods: We implemented the ERAS program at The Third Affiliated Hospital of Shanghai University from January 2020 and retrospectively compared outcomes of patients undergoing total knee or hip arthroplasty before and after the implementation of the program. ERAS protocol consisted of the use of patient education, blood management, multimodal analgesia, antiemetics, shorter fasting time, no patient-controlled analgesia, early physical therapy, and reduced use of catheters and drains. Results: There were 94 patients in the study group (ERAS) and 113 patients in the control group (non-ERAS). We noted a statistically significant reduction in the incidence of postoperative nausea/vomiting, lowered pain scores, reduced length of hospital stay and better functional outcomes with both total knee and hip arthroplasties in our study cohort. Conclusion: ERAS protocol can bae effectively implemented for patients undergoing TJA. The use of ERAS leads to better postoperative outcomes and shortened hospital stay.
RESUMO
Colorectal cancer (CRC) patients frequently develop liver metastases, which are the major cause of cancer-related mortality. The molecular basis and management of colorectal liver metastases (CRLMs) remain a challenging clinical issue. Recent genomic evidence has demonstrated the liver tropism of CRC and the presence of a stricter evolutionary bottleneck in the liver as a target organ compared to lymph nodes. This bottleneck challenging CRC cells in the liver is organ-specific and requires adaptation not only at the genetic level, but also at the phenotypic level to crosstalk with the hepatic microenvironment. Here, we highlight the emerging evidence on the clonal evolution of CRLM and review recent insights into the molecular mechanisms orchestrating the bidirectional interactions between metastatic CRC cells and the unique liver microenvironment.