Ubiquitylation of nucleic acids by DELTEX ubiquitin E3 ligase DTX3L.

The recent discovery of non-proteinaceous ubiquitylation substrates broadened our understanding of this modification beyond conventional protein targets. However, the existence of additional types of substrates remains elusive. Here, we present evidence that nucleic acids can also be directly ubiquitylated via ester bond formation. DTX3L, a member of the DELTEX family E3 ubiquitin ligases, ubiquitylates DNA and RNA in vitro and that this activity is shared with DTX3, but not with the other DELTEX family members DTX1, DTX2 and DTX4. DTX3L shows preference for the 3'-terminal adenosine over other nucleotides. In addition, we demonstrate that ubiquitylation of nucleic acids is reversible by DUBs such as USP2, JOSD1 and SARS-CoV-2 PLpro. Overall, our study proposes reversible ubiquitylation of nucleic acids in vitro and discusses its potential functional implications.

Orientation optimization for high performance Mg3Sb2thermoelectric films via thermal evaporation.

Low-cost, highly efficient thermoelectric thin-film materials are becoming increasingly popular as miniaturization progresses. Mg3Sb2has great potential due to its low cost and high performance. However, the fabrication of Mg3Sb2thin films with high power factors (PFs) poses a certain challenge. In this work, we propose a general approach to prepare Mg3Sb2thin films with excellent thermoelectric properties. Using a two-step thermal evaporation and rapid annealing process, (001)-oriented Mg3Sb2thin films are fabricated onc-plane-oriented Al2O3substrates. The structure of the film orientation is optimized by controlling the film thickness, which modulates the thermoelectric performance. The PF of the Mg3Sb2at 500 nm (14µW·m-1·K-2) would increase to 169µW·m-1·K-2with Ag doping (Mg3Ag0.02Sb2) at room temperature. This work provides a new strategy for the development of high-performance thermoelectric thin films at room temperature.

Maximizing interface stability in all-solid-state lithium batteries through entropy stabilization and fast kinetics.

The positive electrode|electrolyte interface plays an important role in all-solid-state Li batteries (ASSLBs) based on garnet-type solid-state electrolytes (SSEs) like Li6.4La3Zr1.4Ta0.6O12 (LLZTO). However, the trade-off between solid-solid contact and chemical stability leads to a poor positive electrode|electrolyte interface and cycle performance. In this study, we achieve thermodynamic compatibility and adequate physical contact between high-entropy cationic disordered rock salt positive electrodes (HE-DRXs) and LLZTO through ultrafast high-temperature sintering (UHS). This approach constructs a highly stable positive electrode|electrolyte interface, reducing the interface resistance to 31.6 Ω·cm2 at 25 °C, making a 700 times reduction compared to the LiCoO2 | LLZTO interface. Moreover, the conformal and tight HE-DRX | LLZTO solid-state interface avoids the transition metal migration issue observed with HE-DRX in liquid electrolytes. At 150 °C, HE-DRXs in ASSLBs (Li|LLZTO | HE-DRXs) exhibit an average specific capacity of 239.7 ± 2 mAh/g at 25 mA/g, with a capacity retention of 95% after 100 cycles relative to the initial cycle-a stark contrast to the 76% retention after 20 cycles at 25 °C in conventional liquid batteries. Our strategy, which considers the principles of thermodynamics and kinetics, may open avenues for tackling the positive electrode|electrolyte interface issue in ASSLBs based on garnet-type SSEs.

Ultrasensitive dynamic light scattering immunodetection of alpha-fetoprotein using heptamer-amplified nanoparticle crosslinking aggregation.

A novel construction strategy is introduced for an ultrasensitive dynamic light scattering (DLS) immunosensor targeting alpha fetoprotein (AFP). This approach relies on a self-assembled heptamer fusion protein (A1-C4bpα), incorporating the dual functions of multivalent recognition and crosslinking aggregation amplification due to the presence of seven AFP-specific A1 nanobodies on the A1-C4bpα heptamer. Leveraging antibody-functionalized magnetic nanoparticles for target AFP capture and DLS signal output, the proposed heptamer-assisted DLS immunosensor offers high sensitivity, strong specificity, and ease of operation. Under the optimized conditions, the designed DLS immunosensor demonstrates excellent linear detection of AFP in the concentration range 0.06 ng mL-1 to 512 ng mL-1, with a detection limit of 15 pg mL-1. The selectivity, accuracy, precision, practicability, and reliability of this newly developed method were further validated through an assay of AFP levels in spiked and actual human serum samples. This work introduces a novel approach for constructing ultrasensitive DLS immunosensors, easily extendable to the sensitive determination of other targets via simply replacing the nanobody sequence, holding great promise in various applications, particularly in disease diagnosis.

PARP14 and PARP9/DTX3L regulate interferon-induced ADP-ribosylation.

PARP-catalysed ADP-ribosylation (ADPr) is important in regulating various cellular pathways. Until recently, PARP-dependent mono-ADP-ribosylation has been poorly understood due to the lack of sensitive detection methods. Here, we utilised an improved antibody to detect mono-ADP-ribosylation. We visualised endogenous interferon (IFN)-induced ADP-ribosylation and show that PARP14 is a major enzyme responsible for this modification. Fittingly, this signalling is reversed by the macrodomain from SARS-CoV-2 (Mac1), providing a possible mechanism by which Mac1 counteracts the activity of antiviral PARPs. Our data also elucidate a major role of PARP9 and its binding partner, the E3 ubiquitin ligase DTX3L, in regulating PARP14 activity through protein-protein interactions and by the hydrolytic activity of PARP9 macrodomain 1. Finally, we also present the first visualisation of ADPr-dependent ubiquitylation in the IFN response. These approaches should further advance our understanding of IFN-induced ADPr and ubiquitin signalling processes and could shed light on how different pathogens avoid such defence pathways.

Investigation of Water Impacts on Surface Properties and Performance of Air-Electrode in Reversible Protonic Ceramic Cells.

Water, being abundant and readily accessible, gains widespread usage as proton source in many catalysis and energy conversion technologies, including applications like reversible protonic ceramic cells (R-PCCs). Revealing the influence of water on the electrode surface and reaction kinetics is critical for further improving their electrochemical performance. Herein, a hydrophilic air-electrode PrBa0.875Cs0.125Co2O5+δ is developed for R-PCC, which demonstrates a remarkable peak power density of 1058 mW cm-2 in fuel cell mode and a current density of 1354 mA cm-2 under 1.3 V in electrolyzing steam at 650 °C. For the first time on R-PCC, surface protons' behavior in response to external voltages is captured using in situ FTIR characterizations. Further, it is shown that contrary to the bulk proton uptake process that is thought to follow hydrogenation reactions and lead to cation reductions. The air-electrode presents enriched surface protons occurring through oxidizing surface cations, as confirmed by depth-profiling XPS results. H/D isotope exchange experiments and subsequent electrochemical characterization analyses reveal that the presence of protons enhances surface reactions. This study fills the knowledge gap between water-containing atmospheres and electrochemical performance by providing insights into the surface properties of the material. These new findings provide guidance for future electrode design and optimization.

Immune checkpoint inhibitors and anti-vascular endothelial growth factor antibody/tyrosine kinase inhibitors with or without transarterial chemoembolization as first-line treatment for advanced hepatocellular carcinoma (CHANCE2201): a target trial emulation study.

Background: The role of transarterial chemoembolization (TACE) in the treatment of advanced hepatocellular carcinoma (HCC) is unconfirmed. This study aimed to assess the efficacy and safety of immune checkpoint inhibitors (ICIs) plus anti-vascular endothelial growth factor (anti-VEGF) antibody/tyrosine kinase inhibitors (TKIs) with or without TACE as first-line treatment for advanced HCC. Methods: This nationwide, multicenter, retrospective cohort study included advanced HCC patients receiving either TACE with ICIs plus anti-VEGF antibody/TKIs (TACE-ICI-VEGF) or only ICIs plus anti-VEGF antibody/TKIs (ICI-VEGF) from January 2018 to December 2022. The study design followed the target trial emulation framework with stabilized inverse probability of treatment weighting (sIPTW) to minimize biases. The primary outcome was overall survival (OS). Secondary outcomes included progression-free survival (PFS), objective response rate (ORR), and safety. The study is registered with ClinicalTrials.gov, NCT05332821. Findings: Among 1244 patients included in the analysis, 802 (64.5%) patients received TACE-ICI-VEGF treatment, and 442 (35.5%) patients received ICI-VEGF treatment. The median follow-up time was 21.1 months and 20.6 months, respectively. Post-application of sIPTW, baseline characteristics were well-balanced between the two groups. TACE-ICI-VEGF group exhibited a significantly improved median OS (22.6 months [95% CI: 21.2-23.9] vs 15.9 months [14.9-17.8]; P < 0.0001; adjusted hazard ratio [aHR] 0.63 [95% CI: 0.53-0.75]). Median PFS was also longer in TACE-ICI-VEGF group (9.9 months [9.1-10.6] vs 7.4 months [6.7-8.5]; P < 0.0001; aHR 0.74 [0.65-0.85]) per Response Evaluation Criteria in Solid Tumours (RECIST) version 1.1. A higher ORR was observed in TACE-ICI-VEGF group, by either RECIST v1.1 or modified RECIST (41.2% vs 22.9%, P < 0.0001; 47.3% vs 29.7%, P < 0.0001). Grade ≥3 adverse events occurred in 178 patients (22.2%) in TACE-ICI-VEGF group and 80 patients (18.1%) in ICI-VEGF group. Interpretation: This multicenter study supports the use of TACE combined with ICIs and anti-VEGF antibody/TKIs as first-line treatment for advanced HCC, demonstrating an acceptable safety profile. Funding: National Natural Science Foundation of China, National Key Research and Development Program of China, Jiangsu Provincial Medical Innovation Center, Collaborative Innovation Center of Radiation Medicine of Jiangsu Higher Education Institutions, and Nanjing Life Health Science and Technology Project.

Development and validation of a radiomics-based model for predicting osteoporosis in patients with lumbar compression fractures.

BACKGROUND: Osteoporosis, a metabolic bone disorder, markedly elevates fracture risks, with vertebral compression fractures being predominant. Antiosteoporotic treatments for patients with osteoporotic vertebral compression fractures (OVCF) lessen both the occurrence of subsequent fractures and associated pain. Thus, diagnosing osteoporosis in OVCF patients is vital. PURPOSE: The aim of this study was to develop a predictive radiographic model using T1 sequence MRI images to accurately determine whether patients with lumbar spine compression fractures also have osteoporosis. STUDY DESIGN: Retrospective cohort study. PATIENT SAMPLE: Patients over 45 years of age diagnosed with a fresh lumbar compression fracture. OUTCOME MEASURES: Diagnostic accuracy of the model (area under the ROC curve). METHODS: The study retrospectively collected clinical and imaging data (MRI and DEXA) from hospitalized lumbar compression fracture patients (L1-L4) aged 45 years or older between January 2021 and June 2023. Using the pyradiomics package in Python, features from the lumbar compression fracture vertebral region of interest (ROI) were extracted. Downscaling of the extracted features was performed using the Mann-Whitney U test and the least absolute shrinkage selection operator (LASSO) algorithm. Subsequently, six machine learning models (Naive Bayes, Support Vector Machine [SVM], Decision Tree, Random Forest, Extreme Gradient Boosting [XGBoost], and Light Gradient Boosting Machine [LightGBM]) were employed to train and validate these features in predicting osteoporosis comorbidity in OVCF patients. RESULTS: A total of 128 participants, 79 in the osteoporotic group and 49 in the nonosteoporotic group, met the study's inclusion and exclusion criteria. From the T1 sequence MRI images, 1906 imaging features were extracted in both groups. Utilizing the Mann-Whitney U test, 365 radiologic features were selected out of the initial 1,906. Ultimately, the lasso algorithm identified 14 significant radiological features. These features, incorporated into six conventional machine learning algorithms, demonstrated successful prediction of osteoporosis in the validation set. The NaiveBayes model yielded an area under the receiver operating characteristic curve (AUC) of 0.84, sensitivity of 0.87, specificity of 0.70, and accuracy of 0.81. CONCLUSIONS: A NaiveBayes machine learning algorithm can predict osteoporosis in OVCF patients using t1-sequence MRI images of lumbar compression fractures. This approach aims to obviate the necessity for further osteoporosis assessments, diminish patient exposure to radiation, and bolster the clinical care of patients with OVCF.

X-ray Activated Nanoprodrug for Visualization of Cortical Microvascular Alterations and NIR-II Image-Guided Chemo-Radiotherapy of Glioblastoma.

The permeability of the highly selective blood-brain barrier (BBB) to anticancer drugs and the difficulties in defining deep tumor boundaries often reduce the effectiveness of glioma treatment. Thus, exploring the combination of multiple treatment modalities under the guidance of second-generation near-infrared (NIR-II) window fluorescence (FL) imaging is considered a strategic approach in glioma theranostics. Herein, a hybrid X-ray-activated nanoprodrug was developed to precisely visualize the structural features of glioma microvasculature and delineate the boundary of glioma for synergistic chemo-radiotherapy. The nanoprodrug comprised down-converted nanoparticle (DCNP) coated with X-ray sensitive poly(Se-Se/DOX-co-acrylic acid) and targeted Angiopep-2 peptide (DCNP@P(Se-DOX)@ANG). Because of its ultrasmall size and the presence of DOX, the nanoprodrug could easily cross BBB to precisely monitor and localize glioblastoma via intracranial NIR-II FL imaging and synergistically administer antiglioblastoma chemo-radiotherapy through specific X-ray-induced DOX release and radiosensitization. This study provides a novel and effective strategy for glioblastoma imaging and chemo-radiotherapy.

Advances in Injectable Hydrogels Based on Diverse Gelation Methods for Biomedical Imaging.

The injectable hydrogels can deliver the loads directly to the predetermined sites and form reservoirs to increase the enrichment and retention of the loads in the target areas. The preparation and injection of injectable hydrogels involve the sol-gel transformation of hydrogels, which is affected by factors such as temperature, ions, enzymes, light, mechanics (self-healing property), and pH. However, tracing the injection, degradation, and drug release from hydrogels based on different ways of gelation is a major concern. To solve this problem, contrast agents are introduced into injectable hydrogels, enabling the hydrogels to be imaged under techniques such as fluorescence imaging, photoacoustic imaging, magnetic resonance imaging, and radionuclide imaging. This review details methods for causing the gelation of imageable hydrogels; discusses the application of injectable hydrogels containing contrast agents in various imaging techniques, and finally explores the potential and challenges of imageable hydrogels based on different modes of gelation.

Fe-Doped Ceria-Based Ceramic Cathode for High-Efficiency CO2 Electrolysis in Solid Oxide Electrolysis Cell.

In the quest for sustainable energy solutions, solid oxide electrolysis cell (SOEC) emerges as a key technology for converting CO2 into fuels and valuable chemicals. This work focuses on pure ceramic Fex Sm0.2 Ce0.8 O2- δ (xFe-SDC) as the fuel electrodes, and Sr-free ceria-based ceramic electrodes can be successfully constructed for x ≤ 0.05. The incorporation of Fe into the ceria lattice increases the oxygen vacancy concentration and promotes the formation of catalytic sites crucial for the CO2 reduction reaction (CO2 RR). Density functional theory calculations indicate that Fe enhances electrochemical performance by decreasing the CO2 RR energy barrier and facilitating oxygen ion diffusion. At 800 °C and 1.5 V, single cells with 0.05Fe-SDC cathodes manifest attractive performance, attaining current densities of -1.98 and -2.26 A cm-2 under 50% CO2 /CO and pure CO2 atmospheres, respectively. These results suggest the great potential of xFe-SDC electrodes as promising avenues for high-performance fuel electrodes in SOEC.

High-performance cryo-temperature ionic thermoelectric liquid cell developed through a eutectic solvent strategy.

Ionic thermoelectric (i-TE) liquid cells offer an environmentally friendly, cost effective, and easy-operation route to low-grade heat recovery. However, the lowest temperature is limited by the freezing temperature of the aqueous electrolyte. Applying a eutectic solvent strategy, we fabricate a high-performance cryo-temperature i-TE liquid cell. Formamide is used as a chaotic organic solvent that destroys the hydrogen bond network between water molecules, forming a deep eutectic solvent that enables the cell to operate near cryo temperatures (down to -35 °C). After synergistic optimization of the electrode and cell structure, the as-fabricated liquid i-TE cell with cold (-35 °C) and hot (70 °C) ends achieve a high power density (17.5 W m-2) and a large two-hour energy density (27 kJ m-2). In a prototype 25-cell module, the open-circuit voltage and short-circuit current are 6.9 V and 68 mA, respectively, and the maximum power is 131 mW. The anti-freezing ability and high output performance of the as-fabricated i-TE liquid cell system are requisites for applications in frigid regions.

Lei's formula attenuates osteoarthritis mediated by suppression of chondrocyte senescence via the mTOR axis: in vitro and in vivo experiments.

Lei's formula (LSF), a traditional Chinese herbal remedy, is recognized for its remarkable clinical effectiveness in treating osteoarthritis (OA). Despite its therapeutic potential, the exact molecular mechanisms underlying LSF's action in OA have remained enigmatic. Existing research has shed light on the role of the mTOR signaling pathway in promoting chondrocyte senescence, a central factor in OA-related cartilage degeneration. Consequently, targeting mTOR to mitigate chondrocyte senescence presents a promising avenue for OA treatment. The primary objective of this study is to establish LSF's chondroprotective potential and confirm its anti-osteoarthritic efficacy through mTOR inhibition. In vivo assessments using an OA mouse model reveal substantial articular cartilage degeneration. However, LSF serves as an effective guardian of articular cartilage, evidenced by reduced subchondral osteosclerosis, increased cartilage thickness, improved surface smoothness, decreased OARSI scores, elevated expression of cartilage anabolic markers (Col2 and Aggrecan), reduced expression of catabolic markers (Adamts5 and MMP13), increased expression of the chondrocyte hypertrophy marker (Col10), and decreased expression of chondrocyte senescence markers (P16 and P21). In vitro findings demonstrate that LSF shields chondrocytes from H2O2-induced apoptosis, inhibits senescence, enhances chondrocyte differentiation, promotes the synthesis of type II collagen and proteoglycans, and reduces cartilage degradation. Mechanistically, LSF suppresses chondrocyte senescence through the mTOR axis, orchestrating the equilibrium between chondrocyte anabolism and catabolism, ultimately leading to reduced apoptosis and decelerated OA cartilage degradation. LSF holds significant promise as a therapeutic approach for OA treatment, offering new insights into potential treatments for this prevalent age-related condition.

Fe-Doped SDC Solid Solution as an Electrolyte for Low-to-Intermediate-Temperature Solid Oxide Fuel Cells.

Ceria-based oxides, such as samaria-doped ceria (SDC), are potential electrolytes for low-to-intermediate-temperature solid oxide fuel cells (SOFCs). The sinterability of these materials can be improved by adding iron as the sintering aid. This work reveals that Fe is soluble in SDC, forming an Fe-doped SDC solid solution. It is found that the solubility is affected by the sintering temperature. Fe doping has obvious effects on electrolyte properties, including sintering characteristics, thermal expansion behaviors, and electrical conductivities in both air and hydrogen atmospheres. The conductivity obviously increases while the activation energy decreases by doping Fe. Compared with that of the bare SDC electrolyte, the performance of the single cell with the Fe-doped SDC is enhanced; for example, the peak power density is increased by 52.8% to 0.726 W cm-2 at 600 °C when humidified hydrogen is used as the fuel and ambient air is used as the oxidant. The single cell showed stable operation at 600 °C under a constant current density of 0.3 A cm-2 for 150 h. Therefore, the Fe-doped SDC solid solution shows promise as a potential electrolyte for low-to-intermediate-temperature SOFCs.

Activatable Probes for Ratiometric Imaging of Endogenous Biomarkers In Vivo.

Dynamic variations in the concentration and abnormal distribution of endogenous biomarkers are strongly associated with multiple physiological and pathological states. Therefore, it is crucial to design imaging systems capable of real-time detection of dynamic changes in biomarkers for the accurate diagnosis and effective treatment of diseases. Recently, ratiometric imaging has emerged as a widely used technique for sensing and imaging of biomarkers due to its advantage of circumventing the limitations inherent to conventional intensity-dependent signal readout methods while also providing built-in self-calibration for signal correction. Here, the recent progress of ratiometric probes and their applications in sensing and imaging of biomarkers are outlined. Ratiometric probes are classified according to their imaging mechanisms, and ratiometric photoacoustic imaging, ratiometric optical imaging including photoluminescence imaging and self-luminescence imaging, ratiometric magnetic resonance imaging, and dual-modal ratiometric imaging are discussed. The applications of ratiometric probes in the sensing and imaging of biomarkers such as pH, reactive oxygen species (ROS), reactive nitrogen species (RNS), glutathione (GSH), gas molecules, enzymes, metal ions, and hypoxia are discussed in detail. Additionally, this Review presents an overview of challenges faced in this field along with future research directions.

A Superior Catalytic Air Electrode with Temperature-Induced Exsolution toward Protonic Ceramic Cells.

Protonic ceramic cells merit extensive exploration, attributed to their innate capabilities for potent and environmentally benign energy conversion. In this work, a temperature-induced exsolution methodology to synthesize SrCo0.5Nb0.5O3-δ (SCN) nanoparticles (NPs) with notably elevated activity on the surface of PrSrCo1.8Nb0.2O6-δ (PSCN) is proposed, directly addressing the extant challenge of restrained catalytic activity prevalent in air electrode materials. In situ assessments reveal that SCN NPs commence exsolution from the matrix at temperatures surpassing 900 °C during straightforward calcination processes and maintain stability throughout annealing. Notably, the resultant SCN-PSCN interface facilitates vapor adsorption and protonation processes, which are poised to enhance surface reaction kinetics pertaining to the proton-involved oxygen reduction and evolution reaction (P-ORR and P-OER). A fuel-electrode-supported protonic ceramic cell leveraging SCN-PSCN as the air electrode manifests compelling performance, attaining a peak power density of 1.30 W·cm-2 in the fuel cell modality and a current density of 1.91 A·cm-2 at 1.3 V in the electrolysis mode, recorded at 650 °C. Furthermore, density functional theory calculations validate that the introduction of SCN NPs onto the PSCN surface conspicuously accelerates electrode reaction rates correlated with P-ORR and P-OER, by significantly mitigating energy barriers associated with surface oxygen and vapor dissociation.

Arterial chemotherapy for hepatocellular carcinoma in China: consensus recommendations.

Hepatocellular carcinoma (HCC) is one of the most common malignancies and the third leading cause of cancer-related deaths globally. Hepatic arterial infusion chemotherapy (HAIC) treatment is widely accepted as one of the alternative therapeutic modalities for HCC owing to its local control effect and low systemic toxicity. Nevertheless, although accumulating high-quality evidence has displayed the superior survival advantages of HAIC of oxaliplatin, fluorouracil, and leucovorin (HAIC-FOLFOX) compared with standard first-line treatment in different scenarios, the lack of standardization for HAIC procedure and remained controversy limited the proper and safe performance of HAIC treatment in HCC. Therefore, an expert consensus conference was held on March 2023 in Guangzhou, China to review current practices regarding HAIC treatment in patients with HCC and develop widely accepted statements and recommendations. In this article, the latest evidence of HAIC was systematically summarized and the final 22 expert recommendations were proposed, which incorporate the assessment of candidates for HAIC treatment, procedural technique details, therapeutic outcomes, the HAIC-related complications and corresponding treatments, and therapeutic scheme management.

DELTEX E3 ligases ubiquitylate ADP-ribosyl modification on nucleic acids.

Although ubiquitylation had traditionally been considered limited to proteins, the discovery of non-proteinaceous substrates (e.g. lipopolysaccharides and adenosine diphosphate ribose (ADPr)) challenged this perspective. Our recent study showed that DTX2 E3 ligase efficiently ubiquitylates ADPr. Here, we show that the ADPr ubiquitylation activity is also present in another DELTEX family member, DTX3L, analysed both as an isolated catalytic fragment and the full-length PARP9:DTX3L complex, suggesting that it is a general feature of the DELTEX family. Since structural predictions show that DTX3L possesses single-stranded nucleic acids binding ability and given the fact that nucleic acids have recently emerged as substrates for ADP-ribosylation, we asked whether DELTEX E3s might catalyse ubiquitylation of an ADPr moiety linked to nucleic acids. Indeed, we show that DTX3L and DTX2 are capable of ubiquitylating ADP-ribosylated DNA and RNA synthesized by PARPs, including PARP14. Furthermore, we demonstrate that the Ub-ADPr-nucleic acids conjugate can be reversed by two groups of hydrolases, which remove either the whole adduct (e.g. SARS-CoV-2 Mac1 or PARP14 macrodomain 1) or just the Ub (e.g. SARS-CoV-2 PLpro). Overall, this study reveals ADPr ubiquitylation as a general function of the DELTEX family E3s and presents the evidence of reversible ubiquitylation of ADP-ribosylated nucleic acids.

Effect of Novel Compound Redox Initiators on Polymerization Mechanism and Mechanical Properties of Acrylic Resin.

Aiming at the problems of long reaction time and the risk of explosion polymerization of acrylate resin, a small amount of ferrocene (Fc) is added to the existing dibenzoyl peroxide (BPO)/N,N-dimethylaniline (DMA) initiators, and the compound redox initiators (BPO/DMA/ (Fc)) are proposed for acrylate resin polymerization at room temperature. The effect of the content of Fc in the resin on the reaction efficiency and the molding quality of products is researched, and the initiation mechanism of the compound redox initiators is analyzed. It is found that with the addition of Fc, the reaction time of the resin can be shortened by 68% at maximum, the heat release temperature of the resin can be reduced by 40% at maximum, the molecular weight of the reaction products can be increased by 74% at maximum, the tensile and bending properties of the resin castings are increased by 23% and 35% at maximum, respectively, and the bending strength and bending modulus are increased by 57% and 27% at maximum, respectively. The compound redox initiators proposed in this paper can improve the molding efficiency and quality of the product, lay a foundation for the application of acrylic resin in the field of pultrusion molding, perfusion molding, and other in situ molding of thermoplastic composites.