High-Precision Measurement of Microscales Based on Optoelectronics and Image Integration Method.

Currently, there are various types of microscales and the conventional line detection system usually has only one detection method, which is difficult to adapt to the diverse calibration needs of microscales. This article investigates the high-precision measurement method of a microscale based on optoelectronics and the image integration method to solve the diversified calibration needs of microscales. The automatic measurement and processing system integrates two methods: the photoelectric signal measurement method and the photoelectric image measurement method. This article studies the smooth motion method based on ordinary linear guides, investigates the method of reducing the cosine error of a small-range interference length measurement, proposes an image-based line positioning method, and studies the edge and center recognition algorithms of the line. According to the experimental data, the system's measurement accuracy was analyzed using the photoelectric signal measurement method to measure the 1 mm microscale, the maximum difference from the reference value was 0.105 µm, the standard uncertainty was 0.068 µm, and the absolute value of normalized error was less than 1. The accuracy of the image measurement method to measure the 1 mm microscale was consistent with that of the photoelectric signal method. The results show good consistency in the measurement results between the two methods of the integrated measurement system. The photoelectric signal method has the technical characteristics of high measurement efficiency and high accuracy, while the pixel-based measurement of the image method has two-dimensional measurement characteristics, which can realize measurements that cannot be realized by the photoelectric signal method; therefore, the measurement system of optoelectronics and image integration is characterized by high precision and a wide range of measurement adaptations.

Comprehensive Metabolomic Analysis of Human Heart Tissue Enabled by Parallel Metabolite Extraction and High-Resolution Mass Spectrometry.

The heart contracts incessantly and requires a constant supply of energy, utilizing numerous metabolic substrates, such as fatty acids, carbohydrates, lipids, and amino acids, to supply its high energy demands. Therefore, a comprehensive analysis of various metabolites is urgently needed for understanding cardiac metabolism; however, complete metabolome analyses remain challenging due to the broad range of metabolite polarities, which makes extraction and detection difficult. Herein, we implemented parallel metabolite extractions and high-resolution mass spectrometry (MS)-based methods to obtain a comprehensive analysis of the human heart metabolome. To capture the diverse range of metabolite polarities, we first performed six parallel liquid-liquid extractions (three monophasic, two biphasic, and one triphasic) of healthy human donor heart tissue. Next, we utilized two complementary MS platforms for metabolite detection: direct-infusion ultrahigh-resolution Fourier-transform ion cyclotron resonance (DI-FTICR) and high-resolution liquid chromatography quadrupole time-of-flight tandem MS (LC-Q-TOF-MS/MS). Using DI-FTICR MS, 9644 metabolic features were detected where 7156 were assigned a molecular formula and 1107 were annotated by accurate mass assignment. Using LC-Q-TOF-MS/MS, 21,428 metabolic features were detected where 285 metabolites were identified based on fragmentation matching against publicly available libraries. Collectively, 1340 heart metabolites were identified in this study, which span a wide range of polarities including polar (benzenoids, carbohydrates, and nucleosides) as well as nonpolar (phosphatidylcholines, acylcarnitines, and fatty acids) compounds. The results from this study will provide critical knowledge regarding the selection of appropriate extraction and MS detection methods for the analysis of the diverse classes of human heart metabolites.

High-Throughput Extracellular Matrix Proteomics of Human Lungs Enabled by Photocleavable Surfactant and diaPASEF.

The extracellular matrix (ECM) is a complex assembly of proteins that provide interstitial scaffolding and elastic recoil for human lungs. The pulmonary extracellular matrix is increasingly recognized as an independent bioactive entity, by creating biochemical and mechanical signals that influence disease pathogenesis, making it an attractive therapeutic target. However, the pulmonary ECM proteome ("matrisome") remains challenging to analyze by mass spectrometry due to its inherent biophysical properties and relatively low abundance. Here, we introduce a strategy designed for rapid and efficient characterization of the human pulmonary ECM using the photocleavable surfactant Azo. We coupled this approach with trapped ion mobility MS with diaPASEF to maximize the depth of matrisome coverage. Using this strategy, we identify nearly 400 unique matrisome proteins with excellent reproducibility that are known to be important in lung biology, including key core matrisome proteins.

SINE-Associated LncRNA SAWPA Regulates Porcine Zygotic Genome Activation.

In mice, retrotransposon-associated long noncoding RNAs (lncRNA) play important regulatory roles in pre-implantation development; however, it is largely unknown whether they function in the pre-implantation development in pigs. The current study aims to screen for retrotransposon-associated lncRNA in porcine early embryos and identifies a porcine 8-cell embryo-specific SINE-associated nuclear long noncoding RNA named SAWPA. SAWPA is essential for porcine embryonic development as depletion of SAWPA results in a developmental arrest at the 8-cell stage, accompanied by the inhibition of the JNK-MAPK signaling pathway. Mechanistically, SAWPA works in trans as a transcription factor for JNK through the formation of an RNA-protein complex with HNRNPA1 and MED8 binding the SINE elements upstream of JNK. Therefore, as the first functional SINE-associated long noncoding RNAs in pigs, SAWPA provides novel insights for the mechanism research on retrotransposons in mammalian pre-implantation development.

Lactate- and immunomagnetic-purified hiPSC-derived cardiomyocytes generate comparable engineered cardiac tissue constructs.

Three-dimensional engineered cardiac tissue (ECT) using purified human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) has emerged as an appealing model system for the study of human cardiac biology and disease. A recent study reported widely used metabolic (lactate) purification of monolayer hiPSC-CM cultures results in an ischemic cardiomyopathy-like phenotype compared with magnetic antibody-based cell sorting (MACS) purification, complicating the interpretation of studies using lactate-purified hiPSC-CMs. Herein, our objective was to determine if use of lactate relative to MACS-purified hiPSC-CMs affects the properties of resulting hiPSC-ECTs. Therefore, hiPSC-CMs were differentiated and purified using either lactate-based media or MACS. Global proteomics revealed that lactate-purified hiPSC-CMs displayed a differential phenotype over MACS hiPSC-CMs. hiPSC-CMs were then integrated into 3D hiPSC-ECTs and cultured for 4 weeks. Structurally, there was no significant difference in sarcomere length between lactate and MACS hiPSC-ECTs. Assessment of isometric twitch force and Ca2+ transient measurements revealed similar functional performance between purification methods. High-resolution mass spectrometry-based quantitative proteomics showed no significant difference in protein pathway expression or myofilament proteoforms. Taken together, this study demonstrates that lactate- and MACS-purified hiPSC-CMs generate ECTs with comparable structural, functional, and proteomic features, and it suggests that lactate purification does not result in an irreversible change in a hiPSC-CM phenotype.

Intrinsic Flame Retardancy and Flexible Solid-Solid Phase Change Materials with Self-Healing and Recyclability.

Conventional polymeric phase change materials (PCMs) have been widely used due to their high heat storage density, small temperature variation, and nontoxicity. However, the high flammability and unrecyclable problems restrict their applications in energy storage devices (ESDs). Although it is facile to introduce a flame retardant into phase change materials to improve fire resistance, the physical blending will deteriorate the mechanical performance and thermal stability of PCMs. Herein, flame-retardant solid-solid PCMs (FRPCMs) with intrinsic flame retardancy, phase change property, self-healing, and recyclability were synthesized by simultaneously integrating tetrabromobisphenol A (TBBPA) and poly(ethylene glycol) (PEG) into polyurethane network skeletons. PEG ingredients acted as phase change materials, and TBBPA not only worked as an efficient flame retardant but also provided dynamic covalent bonds for thermally induced self-healing and recyclability. FRPCMs possess the highest latent heat of 124.7 J/g, high self-healing ability, and high thermal reliability and recyclability. Besides, with the introduction of TBBPA, the limiting oxygen index (LOI) value and char residue significantly increased, the heat release rate (HRR) and total heat release (THR) values decreased, and most of the FRPCMs reached UL94 V-2 rating as well. Hence, the synthesized FRPCMs could expand the application scope of PCMs for thermal energy storage.

Neutral sphingomyelinase regulates mechanotransduction in human engineered cardiac tissues and mouse hearts.

Cardiovascular disease is the leading cause of death in the USA and is known to be exacerbated by elevated mechanical stress from hypertension. Caveolae are plasma membrane structures that buffer mechanical stress but have been found to be reduced in pathological conditions associated with chronically stretched myocardium. To explore the physiological implications of the loss of caveolae, we used human engineered cardiac tissue (ECT) constructs, composed of human induced pluripotent stem cell (hiPSC)-derived cardiomyocytes and hiPSC-derived cardiac fibroblasts, to develop a long-term cyclic stretch protocol that recapitulates the effects of hypertension on caveolae expression, membrane tension, and the ß-adrenergic response. Leveraging this new stretch protocol, we identified neutral sphingomyelinases (nSMase) as mechanoregulated mediators of caveolae loss, ceramide production and the blunted ß-adrenergic response in this human cardiac model. Specifically, in our ECT model, nSMase inhibition via GW4869 prevented stretch-induced loss of caveolae-like structures, mitigated nSMase-dependent ceramide production, and maintained the ECT contractile kinetic response to isoprenaline. These findings are correlated with a blood lipidomic analysis in middle-aged and older adults, which revealed an increase of the circulating levels of ceramides in adults with hypertension. Furthermore, we found that conduction slowing from increased pressure loading in mouse left ventricle was abolished in the context of nSMase inhibition. Collectively, these findings identify nSMase as a potent drug target for mitigating stretch-induced effects on cardiac function. KEY POINTS: We have developed a new stretch protocol for human engineered cardiac tissue that recapitulates changes in plasma membrane morphology observed in animal models of pressure/volume overload. Stretch of engineered cardiac tissue induces activation of neutral sphingomyelinase (nSMase), generation of ceramide, and disassembly of caveolae. Activation of nSMase blunts cardiac ß-adrenergic contractile kinetics and mediates stretch-induced slowing of conduction and upstroke velocity. Circulating ceramides are increased in adults with hypertension, highlighting the clinical relevance of stretch-induced nSMase activity.

Comprehensive Metabolomic Analysis of Human Heart Tissue Enabled by Parallel Metabolite Extraction and High-Resolution Mass Spectrometry.

The heart contracts incessantly and requires a constant supply of energy, utilizing numerous metabolic substrates such as fatty acids, carbohydrates, lipids, and amino acids to supply its high energy demands. Therefore, a comprehensive analysis of various metabolites is urgently needed for understanding cardiac metabolism; however, complete metabolome analyses remain challenging due to the broad range of metabolite polarities which makes extraction and detection difficult. Herein, we implemented parallel metabolite extractions and high-resolution mass spectrometry (MS)-based methods to obtain a comprehensive analysis of the human heart metabolome. To capture the diverse range of metabolite polarities, we first performed six parallel liquid-liquid extractions (three monophasic, two biphasic, and one triphasic extractions) of healthy human donor heart tissue. Next, we utilized two complementary MS platforms for metabolite detection - direct-infusion ultrahigh-resolution Fourier-transform ion cyclotron resonance (DI-FTICR) and high-resolution liquid chromatography quadrupole time-of-flight tandem MS (LC-Q-TOF MS/MS). Using DI-FTICR MS, 9,521 metabolic features were detected where 7,699 were assigned a chemical formula and 1,756 were assigned an annotated by accurate mass assignment. Using LC-Q-TOF MS/MS, 21,428 metabolic features were detected where 626 metabolites were identified based on fragmentation matching against publicly available libraries. Collectively, 2276 heart metabolites were identified in this study which span a wide range of polarities including polar (benzenoids, alkaloids and derivatives and nucleosides) as well as non-polar (phosphatidylcholines, acylcarnitines, and fatty acids) compounds. The results of this study will provide critical knowledge regarding the selection of appropriate extraction and MS detection methods for the analysis of the diverse classes of human heart metabolites.

Highly efficient metal-organic framework based intumescent poly(L-lactic acid) towards fire safety, ignition delay and UV resistance.

Developing multifunctional biodegradable PLA with ignition delay, high efficient fire retardancy, and UV resistance properties is a challenging task owing to its high flammability, and mutually exclusive phenomenon between the latter two properties. In this work, we report a superior efficient synergistic action combining piperazine pyrophosphate (PAPP) and a Co based metal-organic framework (ZIF-67). Results illustrated that with merely 0.06 wt% ZIF-67, intumescent PLA containing 4.96 wt% PAPP reached UL-94 V0 rating. The PLA/4.9PAPP/0.1MOF sample possessed a limiting oxygen index (LOI) value at 33 %, exhibited a 28 % reduction in peak heat release rate (pHRR) and a 67 % increase in fire propagation index (FPI). Moreover, the presence MOF delayed the ignition time of PLA by 12 s due to the highly porous structure of MOF and its chemical heat-sink performance. Insightful reaction to fire mechanism in the condensed phase via TG-FTIR and Raman revealed that a crack free protective intumescent char layer with higher graphitization degree was formed, which effectively enhanced the barrier effect and minimize the heat and fuel transfer. In addition, the UV resistance of PLA composites is enhanced, remaining at and below 5 % transmittance in the UVA and UVB areas. This work provides a green production way of multifunctional degradable materials and broadens their application fields.

Rapid Unambiguous Structure Elucidation of Streptnatamide A, a New Cyclic Peptide Isolated from A Marine-derived Streptomyces sp.

Cyclic peptides have been excellent source of drug leads. With the advances in discovery platforms, the pharmaceutical industry has a growing interest in cyclic peptides and has pushed several into clinical trials. However, structural complexity of cyclic peptides brings extreme challenges for structure elucidation efforts. Isotopic fine structure analysis, Nuclear magnetic resonance (NMR), and detailed tandem mass spectrometry rapidly provided peptide sequence for streptnatamide A, a cyclic peptide isolated from a marine-derived Streptomyces sp. Marfey's analysis determined the stereochemistry of all amino acids, enabling the unambiguous structure determination of this compound. A non-ribosomal peptide synthetase biosynthetic gene cluster (stp) was tentatively identified and annotated for streptnatamide A based on the in silico analysis of whole genome sequencing data. These analytical tools will be powerful tools to overcome the challenges for cyclic peptide structure elucidation and accelerate the development of bioactive cyclic peptides.

High sensitivity top-down proteomics captures single muscle cell heterogeneity in large proteoforms.

Single-cell proteomics has emerged as a powerful method to characterize cellular phenotypic heterogeneity and the cell-specific functional networks underlying biological processes. However, significant challenges remain in single-cell proteomics for the analysis of proteoforms arising from genetic mutations, alternative splicing, and post-translational modifications. Herein, we have developed a highly sensitive functionally integrated top-down proteomics method for the comprehensive analysis of proteoforms from single cells. We applied this method to single muscle fibers (SMFs) to resolve their heterogeneous functional and proteomic properties at the single-cell level. Notably, we have detected single-cell heterogeneity in large proteoforms (>200 kDa) from the SMFs. Using SMFs obtained from three functionally distinct muscles, we found fiber-to-fiber heterogeneity among the sarcomeric proteoforms which can be related to the functional heterogeneity. Importantly, we detected multiple isoforms of myosin heavy chain (~223 kDa), a motor protein that drives muscle contraction, with high reproducibility to enable the classification of individual fiber types. This study reveals single muscle cell heterogeneity in large proteoforms and establishes a direct relationship between sarcomeric proteoforms and muscle fiber types, highlighting the potential of top-down proteomics for uncovering the molecular underpinnings of cell-to-cell variation in complex systems.

Lactate and Immunomagnetic-purified iPSC-derived Cardiomyocytes Generate Comparable Engineered Cardiac Tissue Constructs.

Three-dimensional engineered cardiac tissue (ECT) using purified human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) has emerged as an appealing model system for the study of human cardiac biology and disease. A recent study reported widely-used metabolic (lactate) purification of monolayer hiPSC-CM cultures results in an ischemic cardiomyopathy-like phenotype compared to magnetic antibody-based cell sorting (MACS) purification, complicating the interpretation of studies using lactate-purified hiPSC-CMs. Herein, our objective was to determine if use of lactate relative to MACs-purified hiPSC-CMs impacts the properties of resulting hiPSC-ECTs. Therefore, hiPSC-CMs were differentiated and purified using either lactate-based media or MACS. After purification, hiPSC-CMs were combined with hiPSC-cardiac fibroblasts to create 3D hiPSC-ECT constructs maintained in culture for four weeks. There were no structural differences observed, and there was no significant difference in sarcomere length between lactate and MACS hiPSC-ECTs. Assessment of isometric twitch force, Ca 2+ transients, and ß-adrenergic response revealed similar functional performance between purification methods. High-resolution mass spectrometry (MS)-based quantitative proteomics showed no significant difference in any protein pathway expression or myofilament proteoforms. Taken together, this study demonstrates lactate- and MACS-purified hiPSC-CMs generate ECTs with comparable molecular and functional properties, and suggests lactate purification does not result in an irreversible change in hiPSC-CM phenotype.

Regulation of polylactic acid using irradiation and preparation of PLA-SiO2-ZnO melt-blown nonwovens for antibacterial and air filtration.

Since the COVID-19 pandemic, polypropylene melt-blown nonwovens (MBs) have been widely used in disposable medical surgical masks and medical protective clothing, seriously threatening the environment. As a bio-based biodegradable polymer, polylactic acid (PLA) has attracted great attention in fabricating MBs. However, there are still issues with the undesirable spinnability of PLA and the limited filtration and antibacterial performance of PLA MBs. Herein, a high-efficiency, low-resistance, and antibacterial PLA filter is fabricated by melt-blown spinning and electret postprocessing technology. The irradiation technique is used to tune PLA chain structure, improving its spinnability. Further, silica (SiO2) nanoparticles are added to enhance the charge storage stability of PLA MBs. With a constant airflow rate of 32 L min-1, the PLA-based MBs exhibit a high particulate filtration efficiency of 94.8 ± 1.5%, an ultralow pressure drop of 14.1 ± 1.8 Pa, and an adequate bacterial filtration efficiency of 98 ± 1.2%, meeting the medical protective equipment standard. In addition, the zinc oxide (ZnO) masterbatches are doped into the blend and the antibacterial rate of PLA-based MBs against Escherichia coli and Staphylococcus aureus is higher than 99%. This successful preparation and modification method paves the way for the large-scale production of PLA MBs as promising candidates for high-efficacy and antibacterial filters.

Metformin Monotherapy Alters the Human Plasma Lipidome Independent of Clinical Markers of Glycemic Control and Cardiovascular Disease Risk in a Type 2 Diabetes Clinical Cohort.

Type 2 diabetes (T2D) is a rising pandemic worldwide. Diet and lifestyle changes are typically the first intervention for T2D. When this intervention fails, the biguanide metformin is the most common pharmaceutical therapy. Yet its full mechanisms of action remain unknown. In this work, we applied an ultrahigh resolution, mass spectrometry-based platform for untargeted plasma metabolomics to human plasma samples from a case-control observational study of nondiabetic and well-controlled T2D subjects, the latter treated conservatively with metformin or diet and lifestyle changes only. No statistically significant differences existed in baseline demographic parameters, glucose control, or clinical markers of cardiovascular disease risk between the two T2D groups, which we hypothesized would allow the identification of circulating metabolites independently associated with treatment modality. Over 3000 blank-reduced metabolic features were detected, with the majority of annotated features being lipids or lipid-like molecules. Altered abundance of multiple fatty acids and phospholipids were found in T2D subjects treated with diet and lifestyle changes as compared with nondiabetic subjects, changes that were often reversed by metformin. Our findings provide direct evidence that metformin monotherapy alters the human plasma lipidome independent of T2D disease control and support a potential cardioprotective effect of metformin worthy of future study. SIGNIFICANCE STATEMENT: This work provides important new information on the systemic effects of metformin in type 2 diabetic subjects. We observed significant changes in the plasma lipidome with metformin therapy, with metabolite classes previously associated with cardiovascular disease risk significantly reduced as compared to diet and lifestyle changes. While cardiovascular disease risk was not a primary outcome of our study, our results provide a jumping-off point for future work into the cardioprotective effects of metformin, even in well-controlled type 2 diabetes.

Metabolomics and Genomics Enable the Discovery of a New Class of Nonribosomal Peptidic Metallophores from a Marine Micromonospora.

Although microbial genomes harbor an abundance of biosynthetic gene clusters, there remain substantial technological gaps that impair the direct correlation of newly discovered gene clusters and their corresponding secondary metabolite products. As an example of one approach designed to minimize or bridge such gaps, we employed hierarchical clustering analysis and principal component analysis (hcapca, whose sole input is MS data) to prioritize 109 marine Micromonospora strains and ultimately identify novel strain WMMB482 as a candidate for in-depth "metabologenomics" analysis following its prioritization. Highlighting the power of current MS-based technologies, not only did hcapca enable the discovery of one new, nonribosomal peptide bearing an incredible diversity of unique functional groups, but metabolomics for WMMB482 unveiled 16 additional congeners via the application of Global Natural Product Social molecular networking (GNPS), herein named ecteinamines A-Q (1-17). The ecteinamines possess an unprecedented skeleton housing a host of uncommon functionalities including a menaquinone pathway-derived 2-naphthoate moiety, 4-methyloxazoline, the first example of a naturally occurring Ψ[CH2NH] "reduced amide", a methylsulfinyl moiety, and a d-cysteinyl residue that appears to derive from a unique noncanonical epimerase domain. Extensive in silico analysis of the ecteinamine (ect) biosynthetic gene cluster and stable isotope-feeding experiments helped illuminate the novel enzymology driving ecteinamine assembly as well the role of cluster collaborations or "duets" in producing such structurally complex agents. Finally, ecteinamines were found to bind nickel, cobalt, zinc, and copper, suggesting a possible biological role as broad-spectrum metallophores.

A carbon nanotube-based textile pressure sensor with high-temperature resistance.

Textile pressure sensors capable of withstanding high temperatures have attracted increasing interest due to their potential applications in harsh conditions. In this work, a textile pressure sensor with high-temperature resistance was realized based on multi-wall carbon nanotubes (MWCNTs) and quartz fabrics. The textile pressure sensors exhibited low fatigue over 20 000 cyclic loadings. Owing to the high-temperature resistance of MWCNTs and quartz fabrics, the textile sensor can work at temperatures up to 300 °C and can maintain good sensitivity after calcination at 900 °C in N2 for 30 min. This work provides a simple, facile, and inexpensive method for fabricating textile pressure sensors with high-temperature resistance.

Segmental Bronchial Allergen Challenge Elicits Distinct Metabolic Phenotypes in Allergic Asthma.

Asthma is a complex syndrome associated with episodic decompensations provoked by aeroallergen exposures. The underlying pathophysiological states driving exacerbations are latent in the resting state and do not adequately inform biomarker-driven therapy. A better understanding of the pathophysiological pathways driving allergic exacerbations is needed. We hypothesized that disease-associated pathways could be identified in humans by unbiased metabolomics of bronchoalveolar fluid (BALF) during the peak inflammatory response provoked by a bronchial allergen challenge. We analyzed BALF metabolites in samples from 12 volunteers who underwent segmental bronchial antigen provocation (SBP-Ag). Metabolites were quantified using liquid chromatography-tandem mass spectrometry (LC-MS/MS) followed by pathway analysis and correlation with airway inflammation. SBP-Ag induced statistically significant changes in 549 features that mapped to 72 uniquely identified metabolites. From these features, two distinct inducible metabolic phenotypes were identified by the principal component analysis, partitioning around medoids (PAM) and k-means clustering. Ten index metabolites were identified that informed the presence of asthma-relevant pathways, including unsaturated fatty acid production/metabolism, mitochondrial beta oxidation of unsaturated fatty acid, and bile acid metabolism. Pathways were validated using proteomics in eosinophils. A segmental bronchial allergen challenge induces distinct metabolic responses in humans, providing insight into pathogenic and protective endotypes in allergic asthma.

Airway fibrin formation cascade in allergic asthma exacerbation: implications for inflammation and remodeling.

BACKGROUND: Airway remodeling in patients with asthma, which leads to a decline in pulmonary function, is likely the result of repeated exacerbations often provoked by aeroallergen exposures. Aeroallegen exposure triggers a stereotypic response orchestrated by growth factor cytokines and other protein mediators. This results in a late-phase allergic reaction characterized by vascular permeability, recruitment of activated leukocytes, and activation of structural cells of the airway. The spectrum of protein mediators and their functions are incompletely understood. METHODS: Bronchoalveolar lavage fluid (BALF) samples were obtained from 12 volunteers who exhibited robust eosinophilic recruitment following segmental bronchial provocation with allergen (SBP-Ag). We systematically identified and quantified proteins in BALF using high-performance liquid chromatography-high-resolution mass spectrometry (LC-MS/MS) followed by pathway analysis and correlations with airway physiology. RESULTS: Pairwise analysis of protein abundance in BALF pre- vs post-SBP-Ag revealed that 55 proteins were upregulated and 103 proteins were downregulated. We observed enrichment of groups of proteins mapping to hemostasis/fibrin clot, platelet activation, lipoprotein assembly, neutrophil degranulation proteins, and acute-phase inflammation-airway remodeling pathways. The abundances of F2 and Fibrinogen γ (FGG) correlated with eosinophil numbers, whereas SERPINA3 negatively correlated with change in FeNO. The coagulation proteins F2 and KNG negatively correlated with FN1 an index of airway remodeling. Interestingly, patients with lower FEV1 showed distinct allergen-induced patterns of 8 BALF proteins, including MUC1, alarmins (HSPB1), and actin polymerization factors. CONCLUSIONS: Protein abundance of the fibrin formation cascade, platelet activation and remodeling are associated with late-phase leukocyte numbers and markers of remodeling. Patients with lower FEV1 have distinct dynamic responses to allergen.

miR-195 Inhibits Proliferation and Enhances Apoptosis of OSCC Cells via Targeting TLR4.

The aim of this research was to assess the function of microribonucleic acid (miR)-195 in the apoptosis and proliferation of oral squamous cell carcinoma (OSCC) cells as well as its action mechanism. The downstream target protein of miR-195 was predicted using the biological software. A quantitative polymerase chain reaction (qPCR) was implemented to examine the changes in expressions of miR-195 and its target protein toll-like receptor 4 (TLR4) in OSCC cell lines (TSCCA, Tca8223, Tb3.1, and CAL-27) and normal adult human gingival fibroblasts (HGFs), and the relation between their expressions was assessed. The expressions of phosphorylated proteins in nuclear factor-κB (NF-κB) pathway were determined through western blotting. miR-195 was expressed at a noticeably lower level in four OSCC cells than in HGFs, and the lowest level appeared in CAL-27 cells. Compared with miR-195 control, the miR-195 mimic could obviously raise the expression of miR-195. In CAL-27 cells with high expression of miR-195, the proliferation was inhibited and the apoptosis was evidently enhanced. OSCC cells exhibited evidently reduced protein and mRNA expression of TLR4, and miR-195 expression was inversely associated with TLR4 expression. It was uncovered from the dual-luciferase reporter assay that cells with wild-type TLR4 had prominently weakened luciferase activity relative to cells with mutant-type TLR4, revealing that the direct target of miR-195 is TLR4. The NF-κB pathway was impeded in cells that lowly expressed TLR4. miR-195 blocks the NF-κB pathway via inhibiting the expression of TLR4 in OSCC cells, thereby exerting an antitumor effect.

Broccoli-liked silver phosphate nanoparticles supported on green nanofiber membrane for visible-light driven photodegradation towards water pollutants.

In view of the practical application, it is imperative to develop efficient, exercisable, and visible light driven water pollution treatment materials. Herein, a high-efficiency green photocatalytic membrane for water pollution treatment is proposed and fabricated conveniently. Firstly, silver phosphate (Ag3PO4) nanoparticles with controlled morphology were prepared by simple liquid-phase precipitation method, and then a hierarchical structured Ag3PO4@polylactic acid (PLA) composite nanofiber membrane was prepared by electrospinning. Using electrospun PLA nanofiber membrane as a carrier of photocatalysts can significantly improve the dispersion of Ag3PO4nanoparticles, and increase the contact probability with pollutants and photocatalytic activity. The prepared PLA@Ag3PO4composite membrane was used to degrade methylene blue (MB) and tetracycline hydrochloride (TC) under visible light irradiation. The results showed that the removal ratio of pollutants on Ag3PO4@PLA composite nanofiber membrane was 94.0% for MB and 82.0% for TC, demonstrating an outstanding photocatalytic activity of composite membrane. Moreover, the PLA nanofiber membrane is a self-supported and biodegradable matrix. After five cycles, it can still achieve 88.0% of the initial photocatalytic degradation rate towards MB, showing excellent recyclability. Thus, this composite nanofiber membrane is a high-efficiency and environmental-friendly visible light driven water pollution treatment material that could be used in real applications.