RESUMO
Although a dust-repellent surface is desirable for lunar exploration missions, its fabrication process is complicated and time-consuming. Herein, we report a simple and fast method to fabricate a lunar dust-repellent surface by texturing on an Al substrate via nanosecond laser etching. The laser-induced photothermal effect can rapidly create hierarchical papillary structures on 25 × 25 mm Al substrates (within 30 s). Both atomic force microscopy (AFM) and in situ scanning electron microscopy (SEM) reveal that such structures enable a reduced contact area between the Al substrate and lunar dust and thus reduced adhesion. The reduced dust adhesion force of Al substrates facilitates improving their antidust performance. By optimizing processing parameters, the Al substrate etched with a laser scanning spacing of 80 µm exhibits a lower dust adhesion force (9.58 nN) due to the smallest contact area with dust. Accordingly, its static antilunar dust performance (dust coverage of 1.95%) is significantly improved compared to the pristine Al substrate (dust coverage of 12.98%). Besides, the accumulated dust on the laser-etched Al substrates with low surface adhesion force is easily cleaned up by flipping and gravity (the dust residual rates are less than 17%). The Al substrate with excellent antidust ability presents good potential for lunar exploration missions.