Dome versus single-cut osteotomies for correction of long bone deformities-technical considerations.

Corrective osteotomy allows to improve joint loading, pain and function. In complex deformities, the biggest challenge is to define the optimal surgical solution, while considering anatomical, technical and biomechanical factors. While the single-cut osteotomy (SCOT) and focal dome osteotomy (FDO) are well-established treatment options, their mathematical relationship remain largely unclear. The aim of the study was (1) to describe the close mathematical relationship between the SCOT and FDO and (2) to analyze and introduce a novel technique-the stepped FDO-as a modification of the classic FDO. The mathematical background and relationship of SCOT and FDO are described for the example of a femoral deformity correction and visualized using a 3D surface model taking into account the benefits for the clinical application. The novel modifications of the stepped FDO are introduced and its technical and clinical feasibility demonstrated. Both, SCOT and FDO, rely on the same deformity axis that defines the rotation axis k for a 3D deformity correction. To achieve the desired correction using a SCOT, the resulting cutting plane is perpendicular to k, while using a FDO will result in a cylindrical cut with a central axis parallel to k. The SCOT and FDO demonstrate a strong mathematical relation, as both methods rely on the same deformity axis, however, resulting in different cutting planes. These characteristics enable a complementary use when defining the optimal type of osteotomy. This understanding enables a more versatile planning approach when considering factors as the surgical approach, biomechanical characteristics of fixation or soft tissue conditions. The newly introduced stepped FDO facilitates an exact reduction of the bone fragments and potentially expands the clinical applicability of the FDO.

Instrumentation of hypoplastic pedicles with patient-specific guides.

PURPOSE: Hypoplastic pedicles of the thoracolumbar spine (<5 mm diameter) are often found in syndromic deformities of the spine and pose a challenge in pedicle screw instrumentation. 3D-printed patient-specific guides might help overcome anatomical difficulties when instrumenting pedicles with screws, thereby reducing the necessity for less effective fixation methods such as hooks or sublaminar wires. In this study, the surgical feasibility and clinical outcome of patients with hypoplastic pedicles following pedicle screw instrumentation with 3D-printed patient-specific guides were assessed. METHODS: Hypoplastic pedicles were identified on preoperative computed tomography (CT) scans in six patients undergoing posterior spinal fusion surgery between 2017 and 2020. Based on these preoperative CT scans, patient-specific guides were produced to help with screw instrumentation of these thin pedicles. Postoperatively, pedicle-screw-related complications or revisions were analyzed. RESULTS: 93/105 (88.6%) pedicle screws placed with patient-specific guides were instrumented. 62/93 (66.7%) of these instrumented pedicles were defined as hypoplastic with a mean width of 3.07 mm (SD ±0.98 mm, 95% CI [2.82-3.32]). Overall, 6 complications in the 62 hypoplastic pedicles (9.7%) were observed and included intraoperatively managed 4 cerebrospinal fluid leaks, 1 pneumothorax and 1 delayed revision due to 2 lumbar screws (2/62, 3.3%) impinging the L3 nerve root causing a painful radiculopathy. The mean follow-up time was 26.7 (SD ±11.7) months. Complications were only noted when the pedicle-width-to-screw-diameter ratio measured less than 0.62. CONCLUSION: Patient-specific 3D-printed guides can aid in challenging instrumentation of hypoplastic pedicles in the thoracolumbar spine, especially if the pedicle-width-to-screw-diameter ratio is greater than 0.62.

Computer-assisted planning vs. conventional surgery for the correction of symptomatic mid-shaft clavicular nonunion and malunion.

Background: The aim of this study was to compare the clinical and radiographic outcomes of treatment of symptomatic mal- and/or nonunion of midshaft clavicle fractures using radiographically based free-hand open reduction and internal fixation (ORIF) or computer-assisted 3D-planned, personalized corrective osteotomies performed using patient-specific instrumentation (PSI) and ORIF. The hypotheses were that (1) patients treated with computer-assisted planning and PSI would have a better clinical outcome, and (2) computer-assisted surgical planning would achieve a more accurate restoration of anatomy compared to the free-hand technique. Methods: Between 1998 and 2020, 13 patients underwent PSI, and 34 patients underwent free-hand ORIF and/or corrective osteotomy. After application of exclusion criteria, 12/13 and 11/34 patients were included in the study. The clinical examination included measurement of the active range of motion and assessment of the absolute and relative Constant-Murley Scores and the subjective shoulder value. Subjective satisfaction with the cosmetic result was assessed on a Likert scale from 0 to 100 (subjective aesthetic value). 11/13 and 6/11 patients underwent postoperative computed tomography evaluation of both clavicles. Computed tomography scans were segmented to generate 3D surface models. After projection onto the mirrored contralateral side, displacement analysis was performed. Finally, bony union was documented. The average follow-up time was 43 months in the PSI and 50 months in the free-hand cohort. Results: The clinical outcomes of both groups did not differ significantly. Median subjective shoulder value was 97.5% (70; 100) in the PSI group vs. 90% (0; 100) in the free-hand group; subjective aesthetic value was 86.4% (±10.7) vs. 75% (±18.7); aCS was 82.3 (±10.3) points vs. 74.9 (±26) points; and rCS was 86.7 (±11.3) points vs. 81.9 (±28.1) points. In the free-hand group, 2/11 patients had a postoperative neurological complication. In the PSI cohort, the 3D angle deviation was significantly smaller (PSI/planned vs. free-hand/contralateral: 10.8° (3.1; 23.8) vs. 17.4° (11.6; 42.4); P = .020)). There was also a trend toward a smaller 3D shift, which was not statistically significant (PSI/planned vs. free-hand/contralateral: 6 mm (3.4; 18.3) vs. 9.3 mm (5.1; 18.1); P = .342). There were no other significant differences. A bony union was achieved in all cases. Conclusion: Surgical treatment of nonunion and malunions of the clavicle was associated with very good clinical results and a 100% union rate. This study, albeit in a relatively small cohort with a follow-up of 4 years, could not document any clinically relevant advantage of 3D planning and personalized operative templating over conventional radiographic planning and free-hand surgical fixation performed by experienced surgeons.

MRI findings of traumatic and degenerative rotator cuff tears and introduction of the "cobra sign".

Background: A rotator cuff tear (RCT) is a common shoulder diagnosis and its etiology may be acute, traumatic, or chronic degenerative. Differentiation between the 2 etiologies may be important for multiple reasons, but remains difficult based on imaging. Further knowledge about radiographic and magnetic resonance findings to distinguish traumatic from degenerative RCT is needed. Methods: We analyzed magnetic resonance arthrograms (MRAs) of 96 patients with traumatic or degenerative superior RCT, which were matched according their age and the affected rotator cuff muscle into the 2 groups. Patients older than 66 years of age were excluded from the study to avoid including cases with pre-existing degeneration. In the case of traumatic RCT, the time between the trauma and MRA had to be less than 3 months. Various parameters of the supraspinatus (SSP) muscle-tendon unit were assessed (tendon thickness, presence of a remaining tendon stump at the greater tubercle, magnitude of retraction, layer appearance). The retraction of the 2 SSP layers were individually measured to determine the difference of retraction. Additionally, edema of the tendon and muscle, the tangent- and kinking-sign as well as the newly introduced Cobra-sign (bulging of the distal part of the ruptured tendon with slim configuration of the medial part of the tendon) were analyzed. Results: Edema within the SSP muscle (sensitivity 13%, specificity 100%, P = .011) or the tendon (sensitivity 86%, specificity 36%, P = .014) are more frequent in traumatic RCT. The same association was found for the kinking-sign (sensitivity 53%, specificity 71%, P = .018) and the Cobra sign (sensitivity 47%, specificity 84%, P = .001). Even though not statistically significant, tendencies were observed toward thicker tendon stumps in traumatic RCT, and greater difference in retraction between the 2 SSP layers in the degenerative group. The cohorts had no difference in the presence of a tendon stump at the greater tuberosity. Conclusion: Muscle and tendon edema, as well as tendon kinking appearance and the newly introduced cobra-sign are suitable MRA parameters to distinguish between traumatic and degenerative etiology of a superior RTC.

Finite element analysis of medial closing and lateral opening wedge osteotomies of the distal femur in relation to hinge fractures.

PURPOSE: Intraoperative hinge fractures in distal femur osteotomies represent a risk factor for loss of alignment and non-union. Using finite element analysis, the goal of this study was to investigate the influence of different hinge widths and osteotomy corrections on hinge fractures in medial closed-wedge and lateral open-wedge distal femur osteotomies. METHODS: The hinge was located at the proximal margin of adductor tubercle for biplanar lateral open-wedge and at the upper border of the lateral femoral condyle for biplanar medial closed-wedge distal femur osteotomies, corresponding to optimal hinge positions described in literature. Different hinge widths (5, 7.5, 10 mm) were created and the osteotomy correction was opened/closed by 5, 7.5 and 10 mm. Tensile and compressive strain of the hinge was determined in a finite element analysis and compared to the ultimate strain of cortical bone to assess the hinge fracture risk. RESULTS: Doubling the correction from 5 to 10 mm increased mean tensile and compressive strain by 50% for lateral open-wedge and 48% for medial closed-wedge osteotomies. A hinge width of 10 mm versus 5 mm showed increased strain in the hinge region of 61% for lateral open-wedge and 32% for medial closed-wedge osteotomies. Medial closed-wedge recorded a higher fracture risk compared to lateral open-wedge osteotomies due to a larger hinge cross-section area (60-67%) for all tested configurations. In case of a 5 mm hinge, medial closed-wedge recorded 71% higher strain in the hinge region compared to lateral open-wedge osteotomies. CONCLUSION: Due to morphological features of the medial femoral condyle, finite element analysis suggests that lateral-open wedge osteotomies are the preferable option if larger corrections are intended, as a thicker hinge can remain without an increased hinge fracture risk.

A novel method for evaluating combined component anteversion in total hip arthroplasty on cross-table lateral hip radiographs.

INTRODUCTION: Accurate measurement of combined component anteversion (CA) is important in evaluating the radiographic outcomes following total hip arthroplasty (THA). The aim of the present study was to evaluate the accuracy and reliability of a novel radiographic method in estimating CA in THA. MATERIALS AND METHODS: The radiographs and computer tomography of patients who underwent a primary THA were retrospectively reviewed, to measure the radiographic CA (CAr), defined as the angle between a line connecting the center of the femoral head to the most anterior rim of the acetabular cup and a line connecting the center of the femoral head to the base of the femoral head to allow a comparison with the CA measured on the CT (CACT). Subsequently, a computational simulation was performed to evaluate the effect of cup anteversion, inclination, stem anteversion, and leg rotation on the CAr and develop a formula that would correct the CAr according to the acetabular cup inclination based on the best-fit equation. RESULTS: In the retrospective analysis of 154 THA, the average CAr_cor, and CACT were 53 ± 11° and 54 ± 11° (p > 0.05), respectively. A strong correlation was found between CAr and CACT (r = 0.96, p < 0.001), with an average bias of - 0.5° between CAr_cor and CACT. In the computational simulation, the CAr was strongly affected by the cup anteversion, inclination, stem anteversion, and leg rotation. The formula to convert the CAr to CA_cor was: CA-cor = 1.3*Car - (17* In (Cup Inclination) - 31. CONCLUSION: The combined anteversion measurement of THA components on the lateral hip radiograph is accurate and reliable, implying that it could be routinely used postoperatively but also in patients with persistent complaints following a THA. LEVEL OF EVIDENCE: Cross-sectional study, Level III.

Computer-assisted analysis of functional internal rotation after reverse total shoulder arthroplasty: implications for component choice and orientation.

PURPOSE: Functional internal rotation (IR) is a combination of extension and IR. It is clinically often limited after reverse total shoulder arthroplasty (RTSA) either due to loss of extension or IR in extension. It was the purpose of this study to determine the ideal in-vitro combination of glenoid and humeral components to achieve impingement-free functional IR. METHODS: RTSA components were virtually implanted into a normal scapula (previously established with a statistical shape model) and into a corresponding humerus using a computer planning program (CASPA). Baseline glenoid configuration consisted of a 28 mm baseplate placed flush with the posteroinferior glenoid rim, a baseplate inclination angle of 96° (relative to the supraspinatus fossa) and a 36 mm standard glenosphere. Baseline humeral configuration consisted of a 12 mm humeral stem, a metaphysis with a neck shaft angle (NSA) of 155° (+ 6 mm medial offset), anatomic torsion of -20° and a symmetric PE inlay (36mmx0mm). Additional configurations with different humeral torsion (-20°, + 10°), NSA (135°, 145°, 155°), baseplate position, diameter, lateralization and inclination were tested. Glenohumeral extension of 5, 10, 20, and 40° was performed first, followed by IR of 20, 40, and 60° with the arm in extension of 40°-the value previously identified as necessary for satisfactory clinical functional IR. The different component combinations were taken through simulated ROM and the impingement volume (mm3) was recorded. Furthermore, the occurrence of impingement was read out in 5° motion increments. RESULTS: In all cases where impingement occurred, it occurred between the PE inlay and the posterior glenoid rim. Only in 11 of 36 combinations full functional IR was possible without impingement. Anterosuperior baseplate positioning showed the highest impingement volume with every combination of NSA and torsion. A posteroinferiorly positioned 26 mm baseplate resulting in an additional 2 mm of inferior overhang as well as 6 mm baseplate lateralization offered the best impingement-free functional IR (5/6 combinations without impingement). Low impingement potential resulted from a combination of NSA 135° and + 10° torsion (4/6 combinations without impingement), followed by NSA 135° and -20° torsion (3/6 combinations without impingement) regardless of glenoid setup. CONCLUSION: The largest impingement-free functional IRs resulted from combining a posteroinferior baseplate position, a greater inferior glenosphere overhang, 90° of baseplate inclination angle, 6 mm glenosphere lateralization with respect to baseline setup, a lower NSA and antetorsion of the humeral component. Surgeons can employ and combine these implant configurations to achieve and improve functional IR when planning and performing RTSA. LEVEL OF EVIDENCE: Basic Science Study, Biomechanics.

Influence of medial open wedge high tibial osteotomy on tibial tuberosity-trochlear groove distance.

PURPOSE: Medial open wedge high tibial osteotomy (MOWHTO) is an effective treatment option for realignment of a varus knee. However, a simple supra-tuberositary osteotomy can lead to patella baja and potentially increases the tibial tuberosity-trochlear groove distance (TTTG). The purpose of this study was to quantify the influence of MOWHTO on TTTG. METHODS: Three-dimensional (3D) surface models of five lower extremities with a varus hip-knee-ankle angle (HKA) and a borderline TTTG (≥ 15 mm), five lower extremities with a varus HKA and a normal TTTG (< 15 mm) and a 3D statistical shape model (SSM) of a neutrally aligned healthy knee were analysed by simulating MOWHTO with a stepwise increment of one degree of valgisation from the preoperative coronal deformity (0°-15°) for each patient, resulting in a total of 165 simulations. Postoperative 3D TTTG and tibial torsion (TT) were measured for each simulation. A mathematical formula was developed to calculate the increase of TTTG after MOWHTO. Mean differences between simulated and calculated TTTG were analysed. RESULTS: Mean preoperative HKA was 6.5 ± 3.0° varus (range 0.8°-11.5°). Mean TTTG increased from 14.2 ± 3.2 mm (range 9.6-19.1) preoperatively to 18.8 ± 3.8 mm (range 14.5-25.0) postoperatively (p = 0.001). TTTG increased approximately linear by + 0.5 ± 0.2° (range 0.3-0.8) per 1° of valgisation with a high positive correlation (0.99, p = 0.001) from 0° to 15°. Mean difference between simulated and calculated TTTG was 0.03 ± 0.02 mm (range 0.01-0.07) per 1° of valgisation (p < 0.001). CONCLUSION: MOWHTO results in an approximately linear increase in TTTG of + 0.5 mm per 1° of valgisation in the range from 0° to 15° and the lateralisation of the tibial tuberosity can be calculated reliably using the described formula. Preoperative analysis of TTTG in patients undergoing MOWHTO may prevent unintentional patellofemoral malalignment. LEVEL OF EVIDENCE: III.

Tibial tunnel enlargement is affected by the tunnel diameter-screw ratio in tibial hybrid fixation for hamstring ACL reconstruction.

INTRODUCTION: There is no evidence on screw diameter with regards to tunnel size in anterior cruciate ligament reconstruction (ACLR) using hybrid fixation devices. The hypothesis was that an undersized tunnel coverage by the tibial screw leads to subsequent tunnel enlargement in ACLR in hybrid fixation technique. METHODS: In a retrospective case series, radiographs and clinical scores of 103 patients who underwent primary hamstring tendon ACLR with a hybrid fixation technique at the tibial site (interference screw and suspensory fixation) were obtained. Tunnel diameters in the frontal and sagittal planes were measured on radiographs 6 weeks and 12 months postoperatively. Tunnel enlargement of more than 10% between the two periods was defined as tunnel widening. Tunnel coverage ratio was calculated as the tunnel diameter covered by the screw in percentage. RESULTS: Overall, tunnel widening 12 months postoperatively was 23.1 ± 17.1% and 24.2 ± 18.2% in the frontal and sagittal plane, respectively. Linear regression analysis revealed the tunnel coverage ratio to be a negative predicting risk factor for tunnel widening (p = 0.001). The ROC curve analysis provided an ideal cut-off for tunnel enlargement of > 10% at a tunnel coverage ratio of 70% (sensitivity 60%, specificity 81%, AUC 75%, p < 0.001). Patients (n = 53/103) with a tunnel coverage ratio of < 70% showed significantly higher tibial tunnel enlargement of 15% in the frontal and sagittal planes. The binary logistic regression showed a significant OR of 6.9 (p = 0.02) for tunnel widening > 10% in the frontal plane if the tunnel coverage ratio was < 70% (sagittal plane: OR 14.7, p = 0.001). Clinical scores did not correlate to tunnel widening. CONCLUSION: Tibial tunnel widening was affected by the tunnel diameter coverage ratio. To minimize the likelihood of disadvantageous tunnel expansion-which is of importance in case of revision surgery-an interference screw should not undercut the tunnel diameter by more than 1 mm.

Malunion deformity of the forearm: Three-dimensional length variation of interosseous membrane and bone collision.

It remains unclear to what extent the interosseous membrane (IOM) is affected through the whole range of motion (ROM) in posttraumatic deformities of the forearm. The purpose of this study is to describe the ligament- and bone-related factors involved in rotational deficit of the forearm. Through three-dimensional (3D) kinematic simulations on one cadaveric forearm, angular deformities of 5° in four directions (flexion, extension, valgus, varus) were produced at two locations of the radius and the ulna (proximal and distal third). The occurrence of bone collision in pronation and the linear length variation of six parts of the IOM through the whole ROM were compared between the 32 types of forearm deformities. Similar patterns could be observed among four groups: 12 types of deformity presented increased bone collision in pronation, 8 presented an improvement of bone collision with an increase of the mean linear lengthening of the IOM in neutral rotation, 6 had an increased linear lengthening of the IOM in supination with nearly unchanged bone collision in pronation and 6 types presented nearly unchanged bone collision in pronation with a shortening of the mean linear length of IOM in supination or neutral rotation. This kinematic analysis provides a better understanding of the ligament- and bone-related factors expected to cause rotational deficit in forearm deformity and may help to refine the surgical indications of patient-specific corrective osteotomy.

Is routine magnetic resonance imaging necessary in patients with clinically diagnosed frozen shoulder? Utility of magnetic resonance imaging in frozen shoulder.

Background: Shoulder magnetic resonance imaging (MRI) is commonly performed in patients with frozen shoulder (FS). However, the necessity of MRI and its diagnostic value is questionable. Therefore, the purpose of the present study was to clarify whether routine MRI could identify additional shoulder pathologies not previously suspected in the clinical examination and if any change in the treatment plan based on these additional MRI findings in FS patients was observed. Materials and methods: The medical records of all patients who presented in our outpatient clinic with a diagnosis of FS from January 2017 to December 2018 were retrospectively reviewed. Patient demographics, the number of patients who received a shoulder MRI, changes in the diagnosis or identification of structural shoulder pathologies following MRI examination (if performed), as well as any alternation in the initially suggested treatment plan were recorded. Results: A total of 609 patients (male: 241, female: 368) diagnosed with an FS and an average age of 52 ± 10 (range: 18 to 81) years were identified. In 403 of the 609 patients (66%), a shoulder MRI was performed. An additional structural shoulder pathology was identified in 89 of 403 (22%) patients following the shoulder MRI, mostly rotator cuff tears (partial: 46/403 [11.4%], full-thickness: 30/403 [7.4%], rerupture following reconstruction: 10/403 [2.5%]) and labrum tears (3/403 [0.7%]). At minimum 2-year follow-up, 11 of 403 (2.7%) patients were treated surgically for the additional pathology identified on the MRI scan consisting of an arthroscopic rotator cuff reconstruction in 10 patients and a labrum refixation in one patient. Five of the 609 (0.8%) patients were treated for refractory FS by arthroscopic capsulotomy. Conclusions: Although additional pathologies were identified in 22% of the patients, a change in treatment plan due to the MRI findings was only observed in 2.7% (37 MRIs needed to identify 1 patient with FS requiring surgery for the additional MRI findings). Therefore, routine use of shoulder MRI scans in patients with FS but without suspicion of an additional pathology may not be indicated.

Isometric points in lateral ankle ligament reconstruction: A three-dimensional kinematic study.

BACKGROUND: To optimize the biomechanical outcomes in lateral ankle ligament reconstruction, avoid stiffness or residual laxity, aiming for an isometric reconstruction of the anterior lateral talofibular ligament (ATFL) and the calcaneofibular ligament (CFL) is mandatory. However, the localization of the optimal ligament insertion remains challenging to assess intraoperatively. METHOD: Three-dimensional (3D) surface models from 10 healthy ankles were generated. 30 insertion points of the CFL were defined on the lateral side of the calcaneus each 10% of its total length in the dorsal-to-ventral and proximal-to-distal plane. 6 insertion points were defined at the ventral ridge of fibula from the malleolar tip and 5 insertions were defined along the lateral talar process. The ligament length variation of ATFL and CFL was assessed after a simulation of the flexion/extension around a simulated tibiotalar axis and inversion/eversion around a simulated subtalar axis in 36 different positions. RESULTS: The isometric point of CFL on the calcaneus is located at about 60% along the dorsal-to-ventral and between 60% and 70% along the proximal-to-distal plane. From maximal extension to flexion, these points present respectively a length variation of - 0.8 to - 1.1 mm (p = 0.46) and - 1.1 to - 0.8 mm (p = 0.56). A fibular insertion at 5 mm proximal to the malleolar tip present a length variation ranging from - 0.1-1 mm (p < 0.001) for ATFL and from - 0.7-0.5 mm (p < 0.001) for CFL. A talar insertion point of the ATFL located 5 mm proximal to the subtalar joint present the lowest variation, ranging from - 1.1-0.7 mm (p < 0.001), however an insertion at 20- or 25-mm present isometry (+0.1 to +0.9 mm p = 0.1, and +0.4 to +0.4 mm p = 1 respectively) if the fibular insertion is located at 5 mm proximal to the malleolar tip. CONCLUSION: This study provides anatomical references which are reproducible in daily practice. These insertion points allow to achieve a stable reconstruction while maintaining a tension-free mobilization of the ankle.

Correlation of Postoperative Imaging With MRI and Clinical Outcome After Cartilage Repair of the Ankle: A Systematic Review and Meta-analysis.

Background: Magnetic resonance imaging (MRI) is commonly used for evaluation of ankle cartilage repair, yet its association with clinical outcome is controversial. This study analyzes the correlation between MRI and clinical outcome after cartilage repair of the talus including bone marrow stimulation, cell-based techniques, as well as restoration with allo- or autografting. Methods: A systematic search was performed in MEDLINE, Embase, and Cochrane Collaboration. Articles were screened for correlation of MRI and clinical outcome. Guidelines of Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) were used. Chi-square test and regression analysis were performed to identify variables that determine correlation between clinical and radiologic outcome. Results: Of 2687 articles, a total of 43 studies (total 1212 cases) were included with a mean Coleman score of 57 (range, 33-70). Overall, 93% were case series, and 5% were retrospective and 2% prospective cohort studies. Associations between clinical outcome and ≥1 imaging variable were found in 21 studies (49%). Of 24 studies (56%) using the composite magnetic resonance observation of cartilage repair tissue (MOCART) score, 7 (29%) reported a correlation of the composite score with clinical outcome. Defect fill was associated with clinical outcome in 5 studies (12%), and 5 studies (50%) reported a correlation of T2 mapping and clinical outcome. Advanced age, shorter follow-up, and larger study size were associated with established correlation between clinical and radiographic outcome (P = .021, P = .028, and P = .033). Conclusion: Interpreting MRI in prediction of clinical outcome in ankle cartilage repair remains challenging; however, it seems to hold some value in reflecting clinical outcome in patients with advanced age and/or at a shorter follow-up. Yet, further research is warranted to optimize postoperative MRI protocols and assessments allowing for a more comprehensive repair tissue evaluation, which eventually reflect clinical outcome in patients after cartilage repair of the ankle.Level of Evidence: Level III, systematic review and meta-analysis.

Precision of the Wilson corrective osteotomy of the first metacarpal base using specific planning and instruments for treatment of basal thumb arthritis.

INTRODUCTION: Arthritis of the basal thumb is a relatively common condition also affecting younger patients. Wilson et al. described a 20°-30° closing wedge osteotomy of the first metacarpal bone to unload the trapeziometacarpal joint. It was the purpose of this study to analyze the clinical and radiographic outcome of patients who underwent proximal extension osteotomy of the first metacarpal bone using patient-specific planning and instruments (PSI). METHODS: All patients who underwent proximal metacarpal osteotomy for basal thumb arthritis at our tertiary referral center were retrospectively included. The patients underwent preoperative planning using computed tomography and 3D segmentation to build patient-specific guides and instruments for the operative treatment. Stable fixation of the osteotomy was achieved by internal plating. The inclusion criterion was a minimum follow-up of 1 year with clinical examination, including the Michigan Hand Outcomes Questionnaire (MHQ), and computed tomography to validate the correction. Complications and reinterventions were recorded. RESULTS: A total of eight Wilson osteotomies in six patients could be included at a mean follow-up duration of 33±16 months (range, 12 to 55 months). The patients were 49±8 years (range, 36 to 58 years) at the surgery and 88% were female. The postoperative MHQ for general hand function was 77±8 (range, 45 to 100) and the MHQ for satisfaction was 77±28 (range, 17 to 100). The working status was unchanged in 7/8 hands (6/7 patients). Radiographic analysis revealed successful correction in all cases with unchanged Eaton-Littler stage in 7/8 hands. No complications were recorded. CONCLUSION: The combined extending and ulnar adducting osteotomy using patient-specific guides and instrumentation provides an accurate treatment for early-stage thumb arthritis. LEVEL OF EVIDENCE: Type IV-retrospective, therapeutic study.

Lumbar spinal fusion does not increase early dislocation risk in primary total hip arthroplasty through the direct anterior approach.

INTRODUCTION: Patients with total hip arthroplasty (THA) and a concomitant lumbar spinal fusion (LSF) might have an increased incidence of revision surgery and postoperative complications such as early THA dislocation. The direct anterior approach (DAA) has gained popularity in THA due to its soft tissue-preserving nature and the relatively low dislocation risk. The purpose of the present study was to examine whether LSF patients undergoing minimally invasive THA through the DAA might have an increased risk of prosthetic-related complications compared to matched-control patients without a LSF. MATERIALS AND METHODS: Patients who underwent THA through the DAA in our institution from January 2014 to December 2018 were identified. A total of 30 primary THA also underwent LSF within 3 months from the initial operation. These patients were randomly matched (1:3) for sex, age, and body mass index with patients who underwent primary THA in our institution without a history of LSF (control group). Peri and postoperative complications, revisions, radiographic and clinical outcomes were assessed retrospectively. RESULTS: LSF patients who underwent THA through the DAA did not have an increased risk of prosthetic-related complications compared to matched-control subjects without a LSF (6.6% versus 4.4%, P < 0.05). The functional and radiological outcomes were similar between groups. CONCLUSION: LSF patients undergoing THA could benefit from the DAA similarly to patients without LSF and without increased rate of early THA dislocation. Although the complex interplay between the lumbar spine and hip in THA patients warrants further investigation, the outcomes of THA through the DAA in LSF patients appear promising. LEVEL OF EVIDENCE: Retrospective case-control study, III.

Inter-rater variability of three-dimensional fracture reduction planning according to the educational background.

BACKGROUND: Computer-assisted three-dimensional (3D) planning is increasingly delegated to biomedical engineers. So far, the described fracture reduction approaches rely strongly on the performance of the users. The goal of our study was to analyze the influence of the two different professional backgrounds (technical and medical) and skill levels regarding the reliability of the proposed planning method. Finally, a new fragment displacement measurement method was introduced due to the lack of consistent methods in the literature. METHODS: 3D bone models of 20 distal radius fractures were presented to nine raters with different educational backgrounds (medical and technical) and various levels of experience in 3D operation planning (0 to 10 years) and clinical experience (1.5 to 24 years). Each rater was asked to perform the fracture reduction on 3D planning software. RESULTS: No difference was demonstrated in reduction accuracy regarding rotational (p = 1.000) and translational (p = 0.263) misalignment of the fragments between biomedical engineers and senior orthopedic residents. However, a significantly more accurate planning was performed in these two groups compared with junior orthopedic residents with less clinical experience and no 3D planning experience (p < 0.05). CONCLUSION: Experience in 3D operation planning and clinical experience are relevant factors to plan an intra-articular fragment reduction of the distal radius. However, no difference was observed regarding the educational background (medical vs. technical) between biomedical engineers and senior orthopedic residents. Therefore, our results support the further development of computer-assisted surgery planning by biomedical engineers. Additionally, the introduced fragment displacement measure proves to be a feasible and reliable method. LEVEL OF EVIDENCE: Diagnostic Level II.

Prognostic value of aortic regurgitation after TAVI in patients with chronic kidney disease.

BACKGROUND: Aortic regurgitation (AR) after transcatheter aortic valve implantation (TAVI) for severe aortic valve stenosis results in major haemodynamic changes. Influence of post-implant AR and aortic valve calcification on outcome in patients with chronic kidney disease (CKD) is unclear. METHODS: Short-term outcome was defined as a combined 30-day endpoint, long-term outcome as survival. Post-implant AR was classified as none/mild or moderate/severe using transthoracic echocardiography. Aortic valve calcification was calculated by computed tomography. Logistic regression analyses were performed in patients with none/mild (estimated glomerular filtration rate [eGFR]≥30ml/min/1.73m(2)) and advanced (eGFR<30ml/min/1.73m(2)) CKD to evaluate predictors of outcome and post-implant AR. RESULTS: TAVI was performed in 546 consecutive patients. Moderate/severe post-implant AR was the only independent predictor of the 30-day endpoint in patients with advanced (OR 7.091, 95% CI 1.144-43.962, p=0.035), but not in patients with none/mild CKD. Similarly, moderate/severe AR predicted impaired survival only in patients with advanced CKD (p<0.001). NT-proBNP (OR 1.023 per 500ng/l increase, 95% CI 1.003-1.043; p=0.026) before intervention was the only independent predictor of the 30-day endpoint in patients with none/mild CKD. Aortic valve calcification was comparable in patients with none/mild versus advanced CKD and was an independent predictor of moderate/severe post-implant AR in the overall population as well as in the subgroups with none/mild or advanced CKD. CONCLUSIONS: Moderate/severe AR after TAVI predicts outcome in patients with advanced CKD, but not in patients with none/mild CKD. Aortic valve calcification is an important predictor of post-implant AR independent of kidney function.

Colorectal polyps: detection with dark-lumen MR colonography versus conventional colonoscopy.

PURPOSE: To prospectively compare dark-lumen magnetic resonance (MR) colonography with conventional colonoscopy in the detection of colorectal polyps. MATERIALS AND METHODS: Local ethical committee approval and informed consent were obtained. One hundred consecutive patients (56 men, 44 women; mean age +/- standard deviation, 67.7 years +/- 14.7; range, 25-82 years) who were referred for conventional colonoscopy from January 2003 to January 2004 underwent MR colonography and conventional colonoscopy after standard precolonoscopic bowel cleansing. Colonoscopy was performed immediately after MR colonography. For MR colonography, the colon was filled with approximately 2000 mL of tap water. Imaging was performed with a 1.5-T MR unit with patients in the prone position. A T1-weighted three-dimensional volumetric interpolated breath-hold sequence was performed before and 75 seconds after intravenous administration of 0.2 mmol gadobenate dimeglumine per kilogram of body weight. Results of MR colonography were analyzed on a per-polyp and per-patient basis. Findings at colonoscopy were used as the reference for determining accuracy, sensitivity, specificity, and positive and negative predictive values of MR colonography. RESULTS: Of 100 patients recruited for study, 92 (52 men, 40 women; mean age, 61.5 years +/- 14.5; range, 25-82 years) underwent complete MR and conventional colonoscopy examinations. Forty-three of the 92 patients (47%) had normal findings at conventional colonoscopy. In the other 49 patients (53%), conventional colonoscopy depicted 107 polyps (82 adenomas, 25 hyperplastic polyps) and seven carcinomas. At per-polyp analysis, sensitivity of MR colonography in the detection of adenomatous polyps was 100% for polyps at least 10 mm in diameter and 84.2% for polyps 6-9 mm in diameter. At per-patient analysis, the accuracy of MR colonography was 93.1% (sensitivity, 89%; specificity, 96%) if detection of adenomatous polyps of all sizes was considered. CONCLUSION: Dark-lumen MR colonography is a promising modality with high accuracy for detecting colorectal polyps larger than 5 mm in diameter.