RESUMO
Little is known about the blood-feeding physiology of arbovirus vector Aedes aegypti although this type of mosquito is known to transmit infectious diseases dengue, Zika, yellow fever, and chikungunya. Blood feeding in the female A. aegypti mosquito is essential for egg maturation and for transmission of disease agents between human subjects. Here, we identify the A. aegypti sulfakinin receptor gene SKR from the A. aegypti genome and show that SKR is expressed at different developmental stages and in varied anatomical localizations in the adult mosquito (at three days after eclosion), with particularly high expression in the CNS. Knockingdown sulfakinin and sulfakinin receptor gene expression in the female A. aegypti results in increased blood meal intake, but microinjection in the thorax of the sulfakinin peptide 1 and 2 both inhibits dose dependently blood meal intake (and delays the time course of blood intake), which is reversible with receptor antagonist. Sulfakinin receptor expressed ectopically in mammalian cells CHO-K1 responds to sulfakinin stimulation with persistent calcium spikes, blockable with receptor antagonist. These data together suggest that activation of the Gq protein-coupled (i.e., calcium-mobilizing) sulfakinin receptor inhibits blood meal intake in female A. aegypti mosquitoes and could serve as a strategic node for the future control of A. aegypti mosquito reproduction/population and disease transmission.
Assuntos
Aedes , Receptores Acoplados a Proteínas G , Animais , Aedes/metabolismo , Aedes/genética , Feminino , Receptores Acoplados a Proteínas G/metabolismo , Receptores Acoplados a Proteínas G/genética , Células CHO , Proteínas de Insetos/metabolismo , Proteínas de Insetos/genética , Cricetulus , Comportamento Alimentar/fisiologia , Mosquitos VetoresRESUMO
It is challenging to attain strong near-infrared (NIR) emissive gold nanoclusters. Here we show a rod-shaped cluster with the composition of [Au28(p-MBT)14(Hdppa)3](SO3CF3)2 (1 for short, Hdppa is N,N-bis(diphenylphosphino)amine, p-MBT is 4-methylbenzenethiolate) has been synthesized. Single crystal X-ray structural analysis reveals that it has a rod-like face-centered cubic (fcc) Au22 kernel built from two interpenetrating bicapped cuboctahedral Au15 units. 1 features NIR luminescence with an emission maximum at 920 nm, and the photoluminescence quantum yield (PLQY) is 12%, which is 30-fold of [Au21(m-MBT)12(Hdppa)2]SO3CF3 (2, m-MBT is 3-methylbenzenethiolate) with a similar composition and 60-fold of Au30S(StBu)18 with a similar structure. time-dependent DFT(TDDFT)calculations reveal that the luminescence of 1 is associated with the Au22 kernel. The small Stokes shift of 1 indicates that it has a very small excited state structural distortion, leading to high radiative decay rate (kr) probability. The emission of cluster 1 is a mixture of phosphorescence and thermally activated delayed fluorescence(TADF), and the enhancement of the NIR emission is mainly due to the promotion of kr rather than the inhibition of knr. This work demonstrates that the metal kernel and the surface structure are both very important for cluster-based NIR luminescence materials.
RESUMO
BACKGROUND: To review the impact of the operating microscope (OM) for reconstruction of the hepatic artery (HA) by comparing the outcomes with standard loupe reconstruction (SL) in pediatric liver transplantation (LT). METHODS: Studies comparing the application of OM and SL for the reconstruction of the HA in primary pediatric LT were included from a systematic search of MEDLINE, Cochrane Library and EMBASE from inception to June 2022. Re-transplantation, dual grafts and auxiliary transplants were excluded. Primary outcome was the rate of HA thrombosis (HAT). Secondary outcomes were graft loss and mortality. RESULTS: There were 1261 liver recipients from 9 included studies published until June 2022. There were 484 patients in the OM group and 777 patients in the SL group. HAT incidence with OM was significantly lower with OR = 0.18 (95% CI: 0.07-0.48). The 1-year graft survival was significantly better in the OM group with OR = 2.77 (95% CI: 1.13-6.80). 1-year overall mortality was also significantly lower with OM with OR = 0.39 (0.18-0.86). The use of OM did not significantly impact the incidence of HAT in the living donor liver transplant subgroup. Differences in time for hepatic HA reconstruction, total operating time and length of hospital stay did not reach statistical significance. CONCLUSION: The use of OM has reduced the risk of HAT, graft loss and mortality in pediatric liver transplantation. Adoption of microsurgical principles in general may have contributed to the improved outcomes with SL reconstruction of HA in pediatric LT.
RESUMO
Due to the stability issue, It is difficult to prepare a silver nanocluster bearing functional sites, especially at a large scale. We report the synthesis and structure of a stable silver nanocluster bearing multiple surface aldehyde groups [Ag21(Ph2PO2)10(p-CHOPhC≡C)6]SbF6, which allows for postsynthesis modification such as surface functionalization through aldimine condensation to give homochiral clusters. Remarkably, the preparation of this cluster can be done in ~90 % high yield at gram scale, which facilitates further studies and potential applications. Through DFT calculations and geometric structure analysis, the high stability of this cluster is attributed to the geometric closure and electronic structure. This is the first time that an effective one-pot method has been developed to synthesize functional silver nanoclusters in high yield. The title cluster will be useful in the development of a variety of cluster-based materials.
RESUMO
A 'passivated precursor' approach is developed for the efficient synthesis and isolation of all-alkynyl-protected gold nanoclusters. Direct reduction of dpa-passivated precursor Au-dpa (Hdpa=2,2'-dipyridylamine) in one-pot under ambient conditions gives a series of clusters including Au22(C≡CR)18 (R=-C6H4-2-F), Au36(C≡CR)24, Au44(C≡CR)28, Au130(C≡CR)50, and Au144(C≡CR)60. These clusters can be well separated via column chromatography. The overall isolation yield of this series of clusters is 40 % (based on gold), which is much improved in comparison with previous approaches. It is notable that the molecular structure of the giant cluster Au130(C≡CR)50 is revealed, which presents important information for understanding the structure of the mysterious Au130 nanoclusters. Theoretical calculations indicated Au130(C≡CR)50 has a smaller HOMO-LUMO gap than Au130(S-C6H4-4-CH3)50. This facile and reliable synthetic approach will greatly accelerate further studies on all-alkynyl-protected gold nanoclusters.
RESUMO
A gold(I)-cluster-based twin-cage has been constructed by post-clustering covalent modification of a hexa-aldehyde cluster precursor with triaminotriethylamines. The cages-on-cluster structure has double cavities and four binding sites, which show site-discriminative binding for silver(I) and copper(I) guests. The guests in the tripodal hats affect the luminescence of the cluster: the tetra-silver(I) host-guest complex is weakly red-emissive, while the bis-copper(I)-bis-silver(I) one is non-emissive but is a stimuli-responsive supramolecule. The copper(I) ion inside the tri-imine cavity is oxidation sensitive, which enables the release of the bright emissive precursor cluster triggered by H2O2 solution. The hybridization of a cluster with cavities to construct a cluster-based cage presents an innovative concept for functional cluster design, and the post-clustering covalent modification opens up new avenues for finely tuning the properties of clusters.
RESUMO
It remains a grand challenge to amplify the chiroptical activity of chiral metal nanoclusters (NCs) although it is desirable for fundamental research and practical application. Herein, we report a strategy of surface/interface solidification (SIS) for enhancing the chiroptical activity of gold NCs. Structural analysis of [Au19(2R,4R/2S,4S-BDPP)6Cl2]3+ (BDPP is 2,4-bis(diphenylphosphino)pentane) clusters reveals that one of the interfacial gold atoms is flexible between two sites and large space is present on the surface, thus hampering chirality transfer from surface chiral ligands to metal core and leading to low chiroptical activity. Following SIS by filling the flexible sites and replacing chlorides with thiolate ligands affords another pair of [Au20(2R,4R/2S,4S-BDPP)6(4-F-C6H4S)2]4+, which shows a more compact and organized structure and thus an almost 40-fold enhancement of chiroptical activity. This work not only provides an efficient approach for amplifying the chiroptical activity of metal nanoclusters but also highlights the significance of achiral components in shaping chiral nanostructures.
RESUMO
High-precision waveform identification and measurement are effective for waveform detection and evaluation in signal processing. The accuracy of waveform identification, precision of measurement, and speed of response are important indicators of waveform measurement instruments. To detect the waveform accurately, a hold and attenuation circuit divided into two is designed, and the STM32F4 microcontroller is used to accurately capture and perform spectrum analysis using a high-precision analog-to-digital converter based on fast Fourier transform technology to identify key parameters, such as waveform type, frequency, peak-to-peak value, and duty cycle. To improve the recognition accuracy and response speed, technical solutions, such as high-frequency sampling and over-zero detection, are used to improve the system efficiency. Algorithm simulation, circuit simulation, and physical testing show that the high-precision waveform synchronization recognition circuit and algorithm can accurately recognize various essential waveforms in the voltage and frequency ranges of 50 mV ≤ VPP ≤ 10 V and 1 Hz ≤ f ≤ 50 kHz, respectively, and simultaneously measure important parameters, such as frequency, peak-to-peak value, and duty cycle with an accuracy within ±1%. Intelligent linkage, no intermediate parameter setting, and a response speed of approximately 0.3 s make it suitable for such applications as fast and high-precision waveform intelligent detection and display. The method is highly integrated, simple to operate, cost-effective, and practical.
Assuntos
Algoritmos , Inteligência , Simulação por Computador , Exame Físico , TecnologiaRESUMO
A bowl-shaped phosphangulene-protected cubic Cu58 nanocluster has been synthesized. The structure was determined by X-ray crystallography and further analyzed by multiple techniques. The phosphangulenes not only enable ligand substitutions with triphenylphosphines in a cluster-to-cluster transformation way, but also facilitate inter-cluster interactions with fullerenes. These interactions further influence the entirety's photocurrent response and ability to liberate hydrogen when stimulated by light.
RESUMO
Metal nanoclusters have emerged as promising near-infrared (NIR)-emissive materials, but their room-temperature photoluminescence quantum yield (PLQY), especially in solution, is often low (<10%). We studied the photophysics of Au22(tBuPhC≡C)18 (Au22) and its alloy counterpart Au16Cu6(tBuPhC≡C)18 (Au16Cu6) (where tBu is tert-butyl and Ph is phenyl) and found that copper (Cu) doping suppressed the nonradiative decay (~60-fold less) and promoted intersystem crossing rate (~300-fold higher). The Au16Cu6 nanocluster exhibited >99% PLQY in deaerated solution at room temperature with an emission maximum at 720 nanometers tailing to 950 nanometers and 61% PLQY in the oxygen-saturated solution. The approach to achieve near-unity PLQY could enable the development of highly emissive metal cluster materials.
RESUMO
The application of supramolecular templates in aligning atomically precise heterometal arrays is important for pursuing functional materials. Herein, we report that a bilayered supramolecular tri-deprotonated melamine dimer functions as an effective template in the construction of a heterometallic gold(I)-silver(I) macrocyclic cluster [µ6 -(C3 N6 H3 )3- ]2 -AuI 6 AgI 6 . X-ray single crystal structural analysis showed that a crown-like AuI 6 AgI 6 macrocycle is aligned around two parallelly stacked µ6 -(C3 N6 H3 )3- moieties hold together with π-π interactions. Theoretical calculations revealed that the [µ6 -(C3 N6 H3 )3- ]2 motif dominantly contributes to the near-occupied orbitals in the electronic structure, which is closely related to its luminescence properties. This work demonstrates that the supramolecular templates containing multiple symmetric binding sites may present a facile approach in the construction of functional metal clusters.
RESUMO
Structurally precise metal nanoclusters with a facile synthetic process and high catalytic performance have been long pursued. These atomically precise nanocatalysts are regarded as model systems to study structure-performance relationships, surface coordination chemistry, and the reaction mechanism of heterogeneous metal catalysts. Nevertheless, the research on silver-based nanoclusters for driving chemical transformations is sluggish in comparison to gold counterparts. Herein, we report the one-step synthesis of Pt/Ag alloy nanoclusters of [PtAg9(C18H12Br3P)7Cl3](C18H12Br3P), which are highly active in catalysing cycloaddition reactions of CO2 and epoxides. The cluster was obtained in a rather simple way with the reduction of silver and platinum salts in the presence of ligands in one pot. The molecular structure of the titled cluster describes the protection of the Pt-centred Ag9 crown by the shell of phosphine ligands and halides. Its electronic structure, as revealed by density function theoretical calculations, adopts a superatomic geometry with 1S21P6 configuration. Interestingly, the cluster displays high activity in the formation of cyclic carbonates from CO2 under mind conditions.
RESUMO
Reported herein is the facial synthesis, molecular structure, and catalysis of a Pt/Ag nanocluster costabilized by organic ligands of phosphines and inorganic ligands of chlorides. The nanocluster with molecular formula of [PtAg18(dppp)6Cl8](SbF6)2 has been obtained facilely by the one pot method. The structure of the cluster could be anatomized as the stabilizaiton of PtAg12-centered icosahedral core by the metalloligand of dppp-Ag-Cl, in which Cl- not only caps the surface Ag atoms but also binds the core and surface motifs. Featuring eight free electrons in its structure, the cluster exhibits high stability. More interestingly, the exposure of surface metal sites endows the cluster with counterintutively high catalytic activity in hydrogenation reactions.
RESUMO
Functionalizing porous materials with capping agents generates hybrid materials with enhanced properties, while the challenge is how to improve the selectivity and maintain the porosity of the parent framework. Herein, we developed a "Cage-on-MOF" strategy to tune the recognition and catalytic properties of MOFs without impairing their porosity. Two types of porous coordination cages (PCCs) of opposite charges containing secondary binding groups were developed to coordinatively functionalize two distinct porous MOFs, namely MOF@PCC nanocomposites. We demonstrated that the surface-capped PCCs can act as "modulators" to effectively tune the surface charge, stability, and adsorption behavior of different host MOF particles. More importantly, the MOF@PCCs can serve as selective heterogeneous catalysts for condensation reactions to achieve reversed product selectivity and excellent recyclability. This work sets the foundation for using molecular cages as porous surface-capping agents to functionalize and manipulate another porous material, without affecting the intrinsic properties of the parent framework.
RESUMO
The anther tapetum helps control microspore release and essential components for pollen wall formation. TAPETAL DEVELOPMENT and FUNCTION1 (TDF1) is an essential R2R3 MYB tapetum transcription factor in Arabidopsis thaliana; however, little is known about pollen development in the temperate monocot barley. Here, we characterize the barley (Hordeum vulgare L.) TDF1 ortholog using reverse genetics and transcriptomics. Spatial/temporal expression analysis indicates HvTDF1 has tapetum-specific expression during anther stage 7/8. Homozygous barley hvtdf1 mutants exhibit male sterility with retarded tapetum development, delayed tapetum endomitosis and cell wall degeneration, resulting in enlarged, vacuolated tapetum surrounding collapsing microspores. Transient protein expression and dual-luciferase assays show TDF1 is a nuclear-localized, transcription activator, that directly activates osmotin proteins. Comparison of hvtdf1 transcriptome data revealed several pathways were delayed, endorsing the observed retarded anther morphology. Arabidopsis tdf1 mutant fertility was recovered by HvTDF1, supporting a conserved role for TDF1 in monocots and dicots. This indicates that tapetum development shares similarity between monocot and dicots; however, barley HvTDF1 appears to uniquely act as a modifier to activate tapetum gene expression pathways, which are subsequently also induced by other factors. Therefore, the absence of HvTDF1 results in delayed developmental progression rather than pathway failure, although inevitably still results in pollen degeneration.
Assuntos
Arabidopsis , Hordeum , Hordeum/genética , Hordeum/metabolismo , Regulação da Expressão Gênica de Plantas , Flores/fisiologia , Arabidopsis/metabolismo , Fatores de Transcrição/metabolismoRESUMO
A facile strategy that directly reduces alkynyl-silver precursors and copper salts for the synthesis of bimetallic nanoclusters using the weak reducing agent Ph2 SiH2 is demonstrated. Two alkynyl-protected concentric-shell nanoclusters, (Ph4 P)2 [Ag22 Cu12 (C≡CR)28 ] and (Ph4 P)3 [Ag42 Cu12 Cl(C≡CR)36 ] (Ag22 Cu12 and Ag42 Cu12 Cl, R=bis(trifluoromethyl)phenyl), were successfully obtained and characterized by single-crystal X-ray diffraction and electro-spray ionization mass spectrometry. For the first time, a hybrid 55-atom two-shell Mackay icosahedron was found in Ag42 Cu12 Cl, which is icosahedral M54 Cl instead of M55 . The incorporation of a chloride in the metal icosahedron contributes to the stability of the cluster from both electronic and geometric aspects. Alkynyl ligands show various binding-modes including linear "RC≡C-Cu-C≡CR" staple motifs.
RESUMO
The genomes of myxobacteria harbor a variety of biosynthetic gene clusters encoding numerous secondary metabolites, including ribosomally synthesized and post-translationally modified peptides (RiPPs) with diverse chemical structures and biological activities. However, the biosynthetic potential of RiPPs from myxobacteria remains barely explored. Herein, we report a novel myxobacteria lanthipeptide myxococin identified from Myxococcus fulvus. Myxococins represent the first example of lanthipeptides, of which the characteristic multiple thioether rings are installed by employing a Class II lanthipeptide synthetase MfuM and a Class I lanthipeptide cyclase MfuC in a cascaded way. Unprecedentedly, we biochemically characterized the first M61 family aminopeptidase MfuP involved in RiPP biosynthesis, demonstrating that MfuP showed the activity of an endopeptidase activity. MfuP is leader-independent but strictly selective for the multibridge structure of myxococin A and responsible for unwrapping two rings via amide bond hydrolysis, yielding myxococin B. Furthermore, the X-ray crystal structure of MfuP and structural analysis, including active-site mutations, are reported. Finally, myxococins are evaluated to exhibit anti-inflammatory activity in lipopolysaccharide-induced macrophages without detectable cytotoxicity.
Assuntos
Myxococcales , Peptídeos/química , Processamento de Proteína Pós-TraducionalRESUMO
A single-frequency distributed-Bragg-reflector fiber laser at 980â nm with a quantum defect of less than 0.6% was developed with a 1.5-cm 12 wt% ytterbium-doped phosphate fiber pumped by a 974.5-nm laser diode. Linearly polarized single-longitude-mode laser with a polarization extinction ratio (PER) of nearly 30â dB and spectral linewidth of less than 1.8 kHz was obtained. A maximum output power of 275â mW was measured at a launched pump power of 620â mW. The performance of the single-frequency fiber laser pumped at 909â nm and 976â nm was also characterized. This research demonstrated an approach to high-power single-frequency fiber laser oscillators with mitigated thermal effects.
Assuntos
Lasers Semicondutores , ItérbioRESUMO
Photocatalytic organic conversion is considered an efficient, environmentally friendly, and energy-saving strategy for organic synthesis. In recent decades, the molecular cage has emerged as a creative functional material with broad applications in host-guest recognition, drug delivery, catalysis, intelligent materials and other fields. Based on the unique properties of porous molecular cage materials, they provide an ideal platform for leveraging pre-structuring in catalytic reactions and show great potential in various photocatalytic organic reactions. As a result, they have emerged as promising alternatives to conventional molecules or inorganic photocatalysts in redox processes. In this Review, the synthesis strategies based on coordination cages and organic cages, as well as their recent progress in photocatalytic organic conversion, are comprehensively summarized. Finally, we deliver the persistent challenges associated with porous molecular cage compounds that need to be overcome for further development in this field.
RESUMO
Porous materials have been widely applied for supercapacitors; however, the relationship between the electrochemical behaviors and the spatial structures has rarely been discussed before. Herein, we report a series of porous coordination cage (PCC) flexible supercapacitors with tunable three-dimensional (3D) cavities and redox centers. PCCs exhibit excellent capacitor performances with a superior molecular capacitance of 2510 F mmol-1, high areal capacitances of 250 mF cm-2, and unique cycle stability. The electrochemical behavior of PCCs is dictated by the size, type, and open-close state of the cavities. Both the charge binding site and the charge transportation pathway are unambiguously elucidated for PCC supercapacitors. These findings provide central theoretical support for the "structure-property relationship" for designing powerful electrode materials for flexible energy storage devices.