Aggregation induced emission dynamic chiral europium(III) complexes with excellent circularly polarized luminescence and smart sensors.

The synthesis of dynamic chiral lanthanide complex emitters has always been difficult. Herein, we report three pairs of dynamic chiral EuIII complex emitters (R/S-Eu-R-1, R = Et/Me; R/S-Eu-Et-2) with aggregation-induced emission. In the molecular state, these EuIII complexes have almost no obvious emission, while in the aggregate state, they greatly enhance the EuIII emission through restriction of intramolecular rotation and restriction of intramolecular vibration. The asymmetry factor and the circularly polarized luminescence brightness are as high as 0.64 (5D0 → 7F1) and 2429 M-1cm-1 of R-Eu-Et-1, achieving a rare double improvement. R-Eu-Et-1/2 exhibit excellent sensing properties for low concentrations of CuII ions, and their detection limits are as low as 2.55 and 4.44 nM, respectively. Dynamic EuIII complexes are constructed by using chiral ligands with rotor structures or vibration units, an approach that opens a door for the construction of dynamic chiral luminescent materials.

Different anion (NO3- and OAc-)-controlled construction of dysprosium clusters with different shapes.

The complex hydrolysis process and strong uncertainty of self-assembly rules have led to the precise synthesis of lanthanide clusters still being in the "blind-box" stage and simplifying the self-assembly process and developing reliable regulation strategies have attracted widespread attention. Herein, different anions are used to induce the construction of a series of dysprosium clusters with different shapes and connections. When the selected anion is NO3-, it blocks the coordination of metal sites around the cluster through the terminal group coordination mode, thereby controlling the growth of the cluster. When NO3- was changed to OAc-, OAc- adopted a bridging mode to induce modular units to build dysprosium clusters through an annular growth mechanism. Specifically, we selected 2-amino-6-methoxybenzoic acid, 2-hydroxybenzaldehyde, and Dy(NO3)3·6H2O to react under solvothermal conditions to obtain a pentanuclear dysprosium cluster (1). The five Dy(III) ions in 1 are distributed in upper and lower planes and are formed by the tight connection of nitrogen and oxygen atoms, and µ3-OH- bridges on the ligand. Next, octa-nuclear dysprosium cluster (2) were obtained by only regulating ligand substituents. The eight Dy(III) ions in 2 are tightly connected through ligand oxygen atoms, µ2-OH-, and µ3-OH- bridges, forming an elliptical {Dy/O} cluster core. Furthermore, only by changing NO3- to OAc-, a wheel-shaped tetradeca-nuclear dysprosium cluster (3) was obtained. Cluster 3 is composed of OAc- bridged multiple template Dy3L3 units and pulling of these template units connected by an annular growth mechanism forms a wheel-shaped cluster. The angle of the coordination site on NO3- is ∠ONO = 115°, which leads to the further extension of the metal sites on the periphery of clusters 1 and 2 through the terminal group coordination mode, thereby regulating the structural connection of the clusters. However, the angle of the coordination site on OAc- is ∠OCO = 128°, and a slightly increased angle leads to the formation of a ring-shaped cluster 3 by connecting the template units through bridging. This is a rare example of the controllable construction of lanthanide clusters with different shapes induced by the regulation of different anions, which provides a new method for the precise construction of lanthanide clusters with special shapes.

Coordination recognition of differential template units of lanthanide chiral chain.

Coordination-driven self-assembly processes often produce remarkable structures. In particular, self-assembly processes mediated by chiral template units have provided research ideas for analyzing the formation of chiral macromolecules in living organisms. In this study, by regulating the proportion of reaction raw materials in the "one-pot" synthesis of lanthanide complexes, we constructed chiral template units with different coordination orientations. As a result, lanthanide chiral chains connected to different structures were obtained through the self-assembly process of coordination recognition. In particular, driven by coordination, chiral template units with codirectional coordination points (called cis configuration) coordinate solely with cis template units during the self-assembly process to obtain a one-dimensional (1D) chain R-1/S-1 with an "S"-shaped distribution. Moreover, chiral template units with reversed coordination sites (called trans configuration) and twisted chiral template units are connected solely to templates with the same configuration to form a 1D chain R-2/S-2 with an axial helix. A circular dichroism spectrum shows that R-1/S-1 and R-2/S-2 are two pairs of enantiomers. The controllable construction of these two differential 1D chains is of great significance for studying coordination recognition at the molecular level. To the best of our knowledge, this is the first study to construct a 1D lanthanide chain through the self-assembly process of coordination recognition. The assembly process of nucleotides to form a hierarchical structure is simulated. This work provides a vivid example of the controllable synthesis of lanthanide complexes with precise structures and offers a new perspective on the formation process of chiral macromolecules that simulates natural processes.

Aggregation-Induced Emission via the Restriction of the Intramolecular Vibration Mechanism of Pinacol Lanthanide Complexes.

Pinacol lanthanide complexes PyraLn (Ln = Dy and Tb) with the restriction of intramolecular vibration were obtained for the first time via an in situ solvothermal coordination-catalyzed tandem reaction using cheap and simple starting materials, thereby avoiding complex, time-consuming, and expensive conventional organic synthesis strategies. A high-resolution electrospray ionization mass spectrometry (HRESI-MS) analysis confirmed the stability of PyraLn in an organic solution. The formation process of PyraLn was monitored in detail using time-dependent HRESI-MS, which allowed for proposing a mechanism for the formation of pinacol complexes via in situ tandem reactions under one-pot coordination-catalyzed conditions. The PyraLn complexes constructed using a pinacol ligand with a butterfly configuration exhibited distinct aggregation-induced emission (AIE) behavior, with the αAIE value as high as 60.42 according to the AIE titration curve. In addition, the PyraLn complexes in the aggregated state exhibit a rapid photoresponse to various 3d metal ions with low detection limits. These findings provide fast, facile, and high-yield access to dynamic, smart lanthanide complex emissions with bright emission and facilitate the rational construction of molecular machines for artificial intelligence.

A biocompatible pure organic porous nanocage for enhanced photodynamic therapy.

Porphyrin-based photosensitizers have been widely utilized in photodynamic therapy (PDT), but they suffer from deteriorating fluorescence and reactive oxygen species (ROS) due to their close π-π stacking. Herein, a biocompatible pure organic porphyrin nanocage (Py-Cage) with enhanced both type I and type II ROS generation is reported for PDT. The porphyrin skeleton within the Py-Cage is spatially separated by four biphenyls to avoid the close π-π stacking within the nanocage. The Py-Cage showed a large cavity and high porosity with a Brunauer-Emmett-Teller surface area of over 300 m2 g-1, facilitating a close contact between the Py-Cage and oxygen, as well as the fast release of ROS to the surrounding microenvironment. The Py-Cage shows superb ROS generation performance over its precursors and commercial ones such as Chlorin E6 and Rose Bengal. Intriguingly, the cationic π-conjugated Py-Cage also shows promising type I ROS (superoxide and hydroxyl radicals) generation that is more promising for hypoxic tumor treatment. Both in vitro cell and in vivo animal experiments further confirm the excellent antitumor activity of the Py-Cage. As compared to conventional metal coordination approaches to improve PDT efficacy of porphyrin derivatives, the pure organic porous Py-Cage demonstrates excellent biocompatibility, which is further verified in both mice and rats. This work of an organic porous nanocage shall provide a new paradigm for the design of novel, biocompatible and effective photosensitizers for PDT.

"One-Pot" In Situ Tandem Reaction─Dy(III) Coordination-Catalyzed Multicomponent Condensation of Salicylaldehyde Derivatives to Obtain Ketals.

It is difficult to subject simple reaction starting materials to a "one-pot" in situ tandem reaction without post-treatment under mild reaction conditions to obtain multimers with complex structural linkages. In organic synthesis, acetal reactions are often used to protect derivatives containing carbonyl functional groups. Therefore, acetal products tend to have very low stability, and performing multi-step condensation to obtain complex multimeric products is difficult. Herein, we achieved the first efficient multiple condensation of o-vanillin derivatives using Dy(OAc)3·6H2O undergoing a "one-pot" in situ tandem reaction under mild solvothermal conditions to obtain a series of dimers (I and II, clusters 1 and 2) and trimers (I and II, clusters 3 and 4). When methanol or ethanol is used as the solvent, the alcoholic solvent participates in acetal and dehydration reactions to obtain dimers (I and II). Surprisingly, when using acetonitrile as the reaction solvent, the o-vanillin derivatives undergo acetal and dehydration reactions to obtain trimers (I and II). In addition, clusters 1-4 all showed distinct single-molecule magnetic behaviors under zero-field conditions. To the best of our knowledge, this is the first time that multiple acetal reactions catalyzed by coordination-directed catalysis under "one-pot" conditions have been realized, opening a new horizon for the development of fast, facile, green, and efficient synthetic methods for complex compounds.

Infrequent Cubane-Like Chromium Sulfide Cluster with σ-Donor Ligands with Efficient Electrocatalytic Property Toward Hydrogen Evolution Reaction.

The exploitation of efficient and economical electrocatalysts for hydrogen evolution reaction (HER) is of exceeding interest in renewable clean-energy technologies. Herein, the facile solvothermal reaction of S and chromic acetate in ethylenediamine (en) achieved a novel organic hybrid chromium sulfide [Cr4(µ3-S)4(en)4(SH)4]·0.25H2O (1), which offers a new type of antiferromagnetic cubane-like chromium sulfide cluster with σ-donor en ligands. 1 was utilized in combination with Ni nanoparticles and porous Ni foam (NF) to fabricate a Ni/1/NF electrode as an efficient cathodic catalyst, indicating excellent electrocatalytic property toward HER.

Manipulating Solvothermal Coordination-Catalyzed In Situ Tandem Reactions to Construct Dysprosium-Based Complexes with Different Shapes and Zero-Field SMM Behaviors.

By changing the coordination anions (OAc- and Cl-), reaction temperature, solvent, and ligand substituents, four Dy(III)-based complexes were obtained by directed synthesis, which are [Dy4(L1)2(L2)2(OAc)4]·4C2H5OH·3H2O (1, L1 = 1,3,4-thiadiazole-2,5-diamine, H4L2 = 6,6'-(((1,3,4-thiadiazole-2,5-diyl)bis(azanediyl))bis(((3-ethoxy-2-hydroxybenzyl)oxy)methylene))bis(2-ethoxyphen), [Dy4(L3)4(OAc)4]·C2H5OH·H2O (2, H3L3 = 2-(((5-amino-1,3,4-thiadiazol-2-yl)amino)((3-ethoxy-2-hydroxybenzyl)oxy)methyl)-6-ethoxyphenol)), [Dy6(L4)4(L5)2(µ3-OH)4(CH3O)4Cl4]Cl2 (3, H2L4 = 2-hydroxy-3-methoxybenzaldehyde, H2L5 = 2-(((5-amino-1,3,4-thiadiazol-2-yl)amino)(hydroxy)methyl)-6-methoxyphenol), and [Dy6(L6)4(L7)2(µ3-OH)4(CH3O)4Cl4]Cl2·2H3O (4, H2L6 = 2-hydroxy-3-ethoxybenzaldehyde, H2L7 = 2-(((5-amino-1,3,4-thiadiazol-2-yl)amino)(hydroxy)methyl)-6-ethoxyphenol). A series of acetal products (H4L2, H3L3, H2L5, and H2L7) were obtained through dehydration in situ tandem reactions. Magnetic studies show that complexes 1-4 exhibited different single-molecule magnet behavior under zero-field conditions. The best fitting results showed that under zero DC field, the effective energy barriers (Ueff) and magnetic relaxation times (τ0) of complexes 1-4 are Ueff = 117.0 (2.1) K and τ0 = 6.07 × 10-7 s; Ueff = 83.91 (1.5) K and τ0 = 4.28 × 10-7 s; Ueff = 1.28 (0.2) K and τ0 = 0.73 s, and Ueff = 104.43 (13.3) K and τ0 = 8.25 × 10-8 s, respectively.

Anion-Manipulated Hydrolysis Process Assembles of Giant High-Nucleation Lanthanide-Oxo Cluster.

Widespread concern has been raised over the synthesis of highly nucleated lanthanide clusters with special shapes and/or specific linkages. Construction of lanthanide clusters with specific shapes and/or linkages can be achieved by carefully regulating the hydrolysis of lanthanide metal ions and the resulting hydrolysis products. However, studies on the manipulation of lanthanide-ion hydrolysis to obtain giant lanthanide-oxo clusters have been few. In this study, we obtained a tetraicosa lanthanide cluster (3) by manipulating the hydrolysis of Dy(III) ions using an anion (OAc-). As far as we know, cluster 3 has the highest nucleation among all lanthanide-oxo clusters reported. In 3, two triangular Dy3O4 are oriented in opposite directions to form the central connecting axis Dy6(OH)8, which is in turn connected to six Dy3O4 that are oriented in different directions. Meanwhile, a sample of a chiral trinuclear dysprosium cluster (1) was obtained in a mixed CH3OH and CH3CN solvent and by replacing the anion in the reaction to Cl- ions. In this cluster, 1,3,4-thiadiazole-2,5-diamine (L2) is free on one side through π···π interactions and is parallel to the o-vanillin (L1)- ligand, thus resulting in a triangular arrangement. The arrangement of L2 affects the end group coordination in the cluster 1 structure through hydrogen bonding and induces the cluster to exhibit chirality. When the reaction solvent was changed to CH3OH, a sample of cluster 2, composed of two independent triangular Dy3 that have different end group arrangements, was obtained. Magnetic analysis showed that clusters 1 and 3 both exhibit distinctive single-molecule magnetic properties under zero-magnetic-field conditions. This study thus provides a method for the creation of chiral high-nucleation clusters from achiral ligands and potentially paves the way for the synthesis of high-nucleation lanthanide clusters with unique forms.

Alkali metal-linked triangular building blocks assemble a high-nucleation lanthanoid cluster based on single-molecule magnets.

The metallic central magnetic axes in high-nucleation clusters with complex structural connections tend to be disorganized and cancel each other out. Therefore, high-nucleation clusters cannot easily exhibit single-molecule magnets (SMMs) behaviors. Herein, we select a triple-core building block (Dy3K2, 1) and use linked diamagnetic alkali metal to form an open, spherical, high-nucleation cluster Dy12Na6 (3) with SMM behavior. Furthermore, by changing the reaction conditions, Dy6K2 (2) formed by linking two Dy3 by K(I) is obtained. High-resolution electrospray mass spectrometry of clusters 1-3 effectively captures the building block Dy3, and clusters 1 and 3 and Dy3 have high stability even with the increase in ion source energy. To the best of our knowledge, this is the first time that an SMM based on a high-nucleation cluster has been obtained by connecting magnetic primitives via diamagnetic metal ions. Dy12K6 is currently the highest nuclear ns-4f heterometallic SMM.

Assembly of pinwheel/twist-shaped chiral lanthanide clusters with rotor structures by an annular/linear growth mechanism and their magnetic properties.

Although progress has been made in the design and synthesis of chiral lanthanide clusters with pleasing structural connections and special shapes, assembly rules that guide their directional construction are still lacking. We reacted R/S-mandelic acid hydrazide, 2,3-dihydroxybenzaldehyde and DyCl3·6H2O under solvothermal conditions to obtain two octanuclear chirality clusters R-1 and S-1, which are the enantiomers of each other. R/S-mandelic acid hydrazide and 2,3-dihydroxybenzaldehyde underwent an in situ reaction under "one-pot" conditions to generate a monohydrazone-type organic ligand R/S-mandelic acid hydrazide-2,3-dihydroxybenzaldehyde hydrazone (R/S-H2L). Four R/S-H2L ligands captured eight metal-centered Dy(III) ions and presented an annular arrangement, which assembled to form a pinwheel-shaped chiral cluster R/S-1. The benzene rings at the four vertices of R/S-1 can rotate freely as rotors. This is the first discovery of an annular growth mechanism during the self-assembly of lanthanide clusters. By changing the metal salt to Dy(NO3)3·6H2O, two twist-shaped hexanuclear clusters R-2 and S-2, which are the enantiomers of each other were obtained. Four R/S-H2L and two R/S-H3L ligands captured six metal-centered Dy(III) ions, respectively, and were assembled through a linear growth mechanism to form the twist-shaped chiral clusters R/S-2. This is the first time that a linear growth mechanism has been proposed for the directional construction of lanthanide clusters with specific shapes. Circular dichroism results showed that R/S-1 and R/S-2 were both chiral clusters and enantiomers of each other. Magnetic studies showed that both R/S-1 and R/S-2 exhibit obvious single-molecule magnet (SMM) behaviors under zero-field conditions. This work is the first to propose an annular/linear growth mechanism for the design and synthesis of lanthanide clusters and allows the directional construction of chiral lanthanide clusters with special shapes and structural connections.

Giant Crown-Shaped Dy34 Nanocluster with High Acid-Base Stability Assembled by an out-to-in Growth Mechanism.

Lanthanoid metal ions have large ionic radii, complex coordination modes, and easy distortion of coordination spheres, but the design and synthesis of high-nucleation lanthanoid clusters with high stability in solution (especially aqueous solution) are challenging. Herein, a diacylhydrazone ligand (H2L1) with multidentate chelating coordination sites was used to react with Dy(OAc)3·4H2O under solvothermal conditions to obtain an example of a 34-nucleus crown-shaped dysprosium cluster [Dy34(L)8(µ2-OH)(µ3-OH)21(µ3-O)14(OAc)31(OCH3)2(H2O)15](OAc)3 (1). Structural analysis showed that the bisacylhydrazone ligand H2L1 with polydentate chelate coordination sites could rapidly capture DyIII ions, thereby forming 34-nucleus crown-shaped dysprosium cluster 1 following the out-to-in growth mechanism. Cluster 1 remained stable after immersion in solutions with different pH values (3-14) for 24 h. To the best of the authors' knowledge, high-nucleation lanthanoid clusters with excellent strong acid and base stability and water stability are very rare. Meanwhile, high-resolution electrospray mass spectrometry molecular ion peaks produced by cluster 1 were captured, which proved to be stable also in organic solvents. Magnetic research showed that cluster 1 exhibited frequency-dependent behavior. This work provides a new idea for designing and synthesizing high-nucleation lanthanoid clusters with high stability.

The strong in vitro and vivo cytotoxicity of three new cobalt(II) complexes with 8-methoxyquinoline.

Three new cobalt(II) complexes, [Co(MQL)2Cl2] (CoCl), [Co(MQL)2Br2] (CoBr), and [Co(MQL)2I2] (CoI), bearing 8-methoxyquinoline (MQL) have been designed for the first time. MTT assays showed that CoCl, CoBr, and CoI exhibit much better antiproliferative activities than cisplatin toward cisplatin-resistant SK-OV-3/DDP and SK-OV-3 ovarian cancer cells, with IC50 values of as low as 0.32-5.49 µM. Further, CoCl and CoI can regulate autophagy-related proteins in SK-OV-3/DDP cells and, therefore, they can induce primarily autophagy-mediated cell apoptosis in the following order: CoCl > CoI. The different antiproliferative activities of the MQL complexes CoCl, CoBr, and CoI could be correlated with the lengths of their Co-X bonds, which adopted the following order: CoI > CoBr > CoCl. The 8-HOMQ complexes CoCl (ca. 60.1%) and CoI (ca. 48.8%) also showed potent in vivo anticancer effects after 15 days of treatment. In summary, the MQL ligand highly enhances the antiproliferative activities of cobalt(II) complexes in comparison to other previously reported 8-hydroxyquinoline metal complexes.

Smart Tetraphenylethene-Based Luminescent Metal-Organic Frameworks with Amide-Assisted Thermofluorochromics and Piezofluorochromics.

Luminescent metal-organic frameworks (MOFs) are appealing for the design of smart responsive materials, whereas aggregation-induced emission (AIE) fluorophores with twisted molecular rotor structure provide exciting opportunities to construct MOFs with new topology and responsiveness. Herein, it is reported that elongating AIE rotor ligands can render the newly formed AIE MOF (ZnETTB) (ETTB = 4',4''',4''''',4'''''''-(ethene-1,1,2,2-tetrayl)tetrakis(([1,1'-biphenyl]-3,5-dicarboxylic acid))) with more elasticity, more control for intramolecular motion, and specific amide-sensing capability. ZnETTB shows specific host-guest interaction with amide, where N,N-diethylformamide (DEF), as an example, is anchored through CH···O and CH···π bonds with Zn cluster and ETTB8- ligand, respectively. DEF anchoring reduces both the distortion level and the intramolecular motions of ETTB8- ligand to lead a blueshifted and intensified emission for DEF ∈ ZnETTB. Moreover, amide anchoring also affords the DEF ∈ ZnETTB with the excellent thermofluorochromic behavior, and further increases the piezofluorochromic sensitivity at low-pressure ranges on the basis of its elastic framework. This work is one of the rare examples of amide-responsive smart materials, which shall shed new lights on design of smart MOFs with twisted AIE rotors for further sensing and detection applications.

Rare examples of hybrid chalcogenoarsenate(III) incorporating trivalent vanadium complexes.

A series of new hybrid vanadium chalcogenoarsenates(III) [VIII(en)2AsIIIS3] (1, en = ethylenediamine), [VIII(dap)2AsIIISe3] (2, dap = 1,2-diaminopropane), [VIII(teta)AsIIIQ3] {Q = S (3) and Se (4), teta = triethylene-tetramine}, and [VIII2(en)6(µ2-O)][As2Se5] (5) were solvothermally prepared and structurally characterized. The trigonal-pyramidal [AsIIIQ3]3- anions in 1-4 act as η2-AsIIIQ3 chelating ligands to the unsaturated trivalent vanadium complex cations [VIII(en/dap)2]3+/[VIII(teta)]3+, resulting in neutral molecules. 5 consists of a discrete saddle-like selenidoarsenate [As2Se5]4- anion built up from corner-sharing [AsSe3]3- trigonal pyramids and the dinuclear trivalent vanadium complex cation [VIII2(en)6(µ2-O)]4- constructed through two [VIII(en)3]3+ units bridged via one µ2-O group. The [VIII(en)3]3+ unit contains two bidentate chelating en ligands and one monodentate en ligand, and offers a rare example of an en molecule as a monodentate ligand, because the en molecule usually exhibits the bidentate chelating coordinated mode. Emphatically, although some chalcogenoarsenates combined with transition metal complexes were isolated from chelating organic amine systems by a solvothermal reaction, no trivalent vanadium complex cations are involved in combination with the chalcogenoarsenates in this synthetic method to date. Therefore, 1-5 represent rare examples of hybrid chalcogenoarsenate(III) incorporating trivalent vanadium complexes. The absorption edges of 1-5 are in the energy range of 1.43-1.62 eV, and -they exhibit distinctive photocurrent response and photoconductive properties upon visible-light illumination.

Series of the Largest Dish-Shaped Dysprosium Nanoclusters Formed by In Situ Reactions.

A three-dimensional supermolecule structure is easily formed due to the diverse coordination modes of high-oxidation-state lanthanide metal ions. However, the design and construction of zero-dimensional (0 D) dish-shaped high-nuclearity lanthanide clusters are difficult. Herein, for the first time, we synthesized a series of the largest dish-shaped high-nuclearity lanthanide nanoclusters (1-4) by in situ tandem reactions under solvothermal one-pot conditions. The formation of 1 and 2 involved an in situ reaction of aldehydes and amines, while the condensation reactions between aldehydes occurred in 3 and 4. Based on the structural characteristics of the dish-shaped lanthanide clusters, we proposed two possible assembly mechanisms involving Dy1 → Dy7 → Dy13 → Dy19 (planar epitaxial growth mechanism) and Dy1 → Dy12 → Dy18 → Dy19 (planar internal growth mechanism).

Two Heterometallic Nanoclusters [DyIII4NiII8] and [DyIII10MnIII4MnII2]: Structure, Assembly Mechanism, and Magnetic Properties.

A full understanding of the assembly mechanisms of coordination complexes is of great importance for a directional synthesis under control. We thus explored here the formation mechanisms of the two new heterometallic nanoclusters [DyIII4NiII8(µ3-OH)8(L)8(OAc)4(H2O)4]·3.25EtOH·4CH3CN (1) and [DyIII10MnIII4MnII2O4(OH)12(OAc)16(L)4(HL)2(EtOH)2]·2EtOH·2CH3CN·2H2O (2) with different cubane-based squarelike ring structures, which were obtained from the reactions of 4-bromo-2-[(2-hydroxypropylimino)methyl]phenol (H2L) with Dy(NO)3·6H2O and the transition metal salt Ni(OAc)2·4H2O or Mn(OAc)2·4H2O. The high-resolution electrospray ionization mass spectrometry (HRESI-MS) tests showed that the skeletons of clusters 1 and 2 have a high stability under the measurement conditions for HRESI-MS. The intermediates formed in the reaction courses of clusters 1 and 2 were tracked using time-dependent HRESI-MS, which helped to determine the proposed hierarchical assembly mechanisms for 1 (H2L → NiL → Ni2L2 → Ni3L4 → Ni4L4 → DyNi4L5 → Dy2Ni6L6 → Dy3Ni6L6 → Dy3Ni7L7 → Dy4Ni8L8) and 2 (H2L → MnL → DyMnL → DyMn2L → Dy2Mn2Lx → Dy8Mn2L2 → Dy10Mn2L2 → Dy10Mn6Lx and H2L → DyL → Dy4L2 → Dy6L2 → Dy8Mn2L2 → Dy10Mn2L2 → Dy10Mn6Lx). This is one of the rare examples of investigating the assembly mechanisms of 3d-4f heterometallic clusters. Magnetic studies indicated that the title complexes both show slow magnetic relaxation behaviors and cluster 1 is a field-induced single-molecule magnet.

Truncation reaction regulates the out-to-in growth mechanism to decrypt the formation of brucite-like dysprosium clusters.

Specially shaped high-nuclear lanthanide cluster assembly has attracted widespread attention, but the study of their self-assembly mechanism is still stagnant. Herein, we used a polydentate chelating bis-acylhydrazone ligand to construct a rare 16-nuclear dysprosium cluster 1 with a brucite-like structure. The capture agents, pivalic acid and di(pyridin-2-yl)methanone, were added into the reaction system, and the hexanuclear dysprosium cluster 2 and heptanuclear dysprosium cluster 3 were obtained, respectively. Clusters 2 and 3 support the out-to-in growth mechanism as key evidence. To the best of our knowledge, this study is the first to use truncation reaction to decipher the formation mechanism of high-nuclear lanthanide clusters.

Two Organic Hybrid Manganese Selenoarsenates: The Discovery of One-Dimensional Low-Valent Selenoarsenate(II).

Two organic hybrid manganese selenoarsenates, [Mn(en)3][MnAsII2Se4] (1; en = ethanediamine) and {[Mn(atep)]2[Mn(tepa)](AsVSe4)2} [2; atep = 4-(2-aminoethyl)triethylenetetramine], were made under mild solvothermal conditions. 1 is a new type of one-dimensional low-valent selenoarsenate(II) constructed by the linkages of tetrahedral [MnSe4] units and two manners of bridging of [AsII2Se4]4- anions. 2 comprises a neutral {[Mn(atep)]2[Mn(tepa)](AsVSe4)2} molecule with a rare seven-coordinated manganese center, which represents the sole example of an organic hybrid selenoarsenate with the [Mn(tepa)]2+ complex as the bridging group. Both 1 and 2 exhibit special photocurrent responses upon visible-light illumination and magnetic properties.

A Series of High-Nuclear Gadolinium Cluster Aggregates with a Magnetocaloric Effect Constructed through Two-Component Manipulation.

The serialized expansion of high-nuclear clusters usually includes the controlled variable method and changes only a single variable. However, changing both variables will greatly increase the complexity of the reaction simultaneously. Therefore, the use of a two-component regulation reaction is rare. Herein, we used a diacylhydrazone ligand (H4L1) with multidentate chelating coordination sites for the reaction with Gd(NO3)3·6H2O under solvothermal conditions to obtain an example of 16-nucleus disc-shaped cluster 1 with a brucite structure. The overall structure of cluster 1 can be regarded as an equilateral triangle, which is formed by three (L1)4- ions that can be regarded as "sides" and wrap the four-layer metal center Gd(III) ions. Notably, upon simultaneous regulation of the substituent of the ligand and the coordination anion, heptanuclear gadolinium cluster 2 was obtained. Cluster 2 can be regarded as a butterfly structure, which was formed by connecting two Gd3L2 molecules that were not in the same plane and through the central Gd(III) ion as an intersection. Moreover, hexanuclear gadolinium cluster 3 was obtained by changing the ligand substituent and adding an auxiliary ligand. Cluster 3 can be regarded as a chair structure, which was composed of two molecules of diacylhydrazone ligand (L2)4- wrapping vacant cubane shared by four vertices. This study was the first to construct a series of high-nuclear gadolinium clusters through two-component regulation manipulation. The study of the magnetocaloric effect showed that the maximum values of -ΔSm for clusters 1-3 were 34.05, 29.04, and 24.32 J kg-1 K-1, respectively, when T = 2 K and ΔH = 7 T.