Heat-moisture treatment can modulate all-purpose wheat flour for short dough biscuit making: Evidences and mechanism.

In view of the merits of all-purpose wheat flour (APWF) to soft wheat flour (SWF) in cost and protein supply, the feasibility of heat-moisture treatment (HMT, 19% moisture for 1 h at 60, 80 and 100 °C, respectively) to modify APWF as a substitute SWF in making short dough biscuits was explored. For underlying mechanisms, on the one hand, HMT reduced the hydration capacity of damaged starch particles by coating them with denatured proteins. On the other hand, HMT at 80 °C and 100 °C significantly denatured gluten proteins to form protein aggregates, highly weakening the gluten network in dough. These two aspects jointly conferred APWF dough with higher deformability and therefore significantly improved the qualities of biscuits. Moreover, the qualities of biscuits from APWF upon HMT-100 °C were largely comparable to that from SWF, even higher values were concluded in spread ratio, volume, specific volume and consumer acceptance.

Single knotless-anchor with two ethicon 2# for Ellman grade III bursal-side partial thickness rotator cuff tears: a cadaveric biomechanical study and short-term clinical evaluation.

BACKGROUND: Several surgical techniques are used to treat bursal-side partial thickness rotator cuff tears (PTRCTs). However, use of single knotless-anchor with two Ethicon 2# repair technique for PTRCTs has not been reported. MATERIALS AND METHODS: Bursal-side PTRCTs (Ellman grade III, 75% thickness of tears) were created in the supraspinatus tendon in 16 fresh-frozen cadaveric shoulders. The specimens were randomly assigned to two equal groups: (1) Group A (Transtendon repair), a single knotless-anchor repair with two Ethicon 2#; (2) Group B, Conversion repair (Double-row, DR). Post-repair, each specimen was subjected to cyclic loading test from 5 to 100 N (50 cycles), followed by an ultimate failure test. The displacement of greater tuberosity (mm) and ultimate (N) were recorded. In the clinical study, 12 patients diagnosed with Ellman grade III Bursal-side PTRCTs (using a single knotless anchor with two Ethicon 2# repair techniques) were operated on and analyzed. Visual analog scale (VAS), American Shoulder and Elbow Surgeons Score (ASES), Constant-Murley Score (CMS), and range of motion (ROM) were assessed before surgery and at final minimum follow-up (>1year). RESULTS: There was no significant between-group difference with respect to load-to-failure test (Group A, 359.25 ± 17.91 N; Group B, 374.38 ± 13.75 N, P > 0.05). There were no significant differences with respect to rotator cuff displacement of 10 mm (Group A, 190.50 ± 8.52 N; Group B, 197.25 ± 6.84 N, P > 0.05) and 15 mm (Group A, 282.25 ± 12.20 N; Group B, 291.13 ± 14.74 N, P > 0.05). However, there was significant between-group difference with respect to displacement of 3 and 5 mm (P < 0.05). In the clinical trial, all patients were followed up for an average of 20.4 months (12-29 months). At the last follow-up after surgery(minimum>1year), the VAS score was 0.50 ± 0.67 (0-2), the ASES score was 86.50 ± 3.96 (79-92), the CMS score was 85.08 ± 5.65 (74-93), the mean Forward flexion ROM was 154.00°± 12.48° (131°-169°), and the abduction ROM was 165.00°±13.26° (138°-173°). There was a statistically significant difference between the results of the preoperative and the last postoperative follow-up. The results of the last postoperative follow-up were statistically different from those of the preoperative follow-up (P < 0.05). Regarding complications, stiffness (2 cases) and shoulder impingement (1 case) occurred in 3 cases (25%). CONCLUSION: A single knotless anchor with two Ethicon 2# may provide a biomechanically and clinically feasible option for the treatment of bursal-side Ellman grade III PTRCTs, particularly in resource-constrained settings. MESH KEYWORDS: Bursal-side Ellman Grade III; Single Knotless-anchor; Double-row repair; Biomechanical study; Short-term clinical evaluation.

Unraveling the regulating mechanisms of moisture content in the puffing of sweet potato starch gel.

Starch-based puffed crisps are a major group of popular snacks. In this work, the effects and underlying mechanisms of moisture content (MC) on the puffing of sweet potato starch gels were explored. The results showed that the gel with 12 % MC generated the highest puffing ratio (8.96), then followed by gels with 16 % MC (8.45) and 8 % MC (8.28). All starch gels presented a two-stage puffing pattern, but their evolutions with the heating temperature were highly dependent on the MC of gels. The relative puffing area percentages of gels with 8 % MC, 12 % MC and 16 % MC in the first (second) stages were 57.64 % (42.36 %), 60.66 % (39.34 %), and 18.36 % (81.64 %), respectively. The final pores in puffed products originated from the small water clusters that were regionalized in gel cells. The air cells started to expand as the gels with 8 % MC, 12 % MC and 16 % MC respectively reached the glass transition temperatures of 158.45 °C, 142.15 °C and 111.03 °C. The puffing was a joint consequence of the extensibility of cell walls and the pressure of water vapor in cells and the MC of the gels could regulate both of them. This study would facilitate the production of starch snacks with higher quality.

Coating peanut shell lignin nanospheres with gelatin via non-covalent adsorption: Key parameters, consequences, and underlying interactions.

In the present work, lignin nanospheres (LNS, average diameter 166.43 nm) were prepared and the affecting parameters, the absorbed types, and mechanisms of their interactions with type-A gelatin (AG) were explored. The findings demonstrated that upon AG coating, the ζ-potential of LNS sharply decreased and concluded a negative-to-positive shift, while the average diameter and polydispersity index increased significantly. AG presented the highest coating capacity (0.32 mg/mg, db) onto LNS (0.5 mg/mL) at an optimum pH of 4.0 and an AG concentration of 1.0 mg/mL. The adsorption of AG onto LNS could be well described by the Hill model (R2 = 0.9895), which was characterized as positive synergistic adsorption by the Hill coefficient (1.32) and physical adsorption by the free energy (3.70 kJ/mg). The spectral analysis revealed that the interactions between AG and LNS were mainly driven by electrostatic forces (ΔG < 0, ΔH < 0, and ΔS > 0) together with the assistance of hydrogen bonds and hydrophobic interactions, which companied a decrease of α-helix (4.04 %) and ß-turn (0.60 %) and an increase of ß-sheet (3.10 %) and random coil (1.53 %) of the secondary structure of AG. The results herein certainly favored the hydrophilic/hydrophobic change of LNS/AG and the quality control of a binary system consisting of lignin and gelatin.

[Application of "door-shaft method" in limited open reduction and internal fixation with locking plate for two- and three-part fractures of the proximal humerus].

OBJECTIVE: To investigate the effectiveness of limited open reduction via "door-shaft method" and internal fixation with locking plate for two- and three-part fractures of the proximal humerus. METHODS: The clinical data of 64 patients with proximal humeral fractures who were admitted between January 2013 and December 2016 and met the selection criteria were retrospectively analyzed. There were 23 males and 41 females, with an average age of 68.0 years (range, 50-89 years). The injuries were caused by falling in 57 cases, traffic accident in 5 cases, and falling from height in 2 cases. The interval between injury and operation was 1-7 days (mean, 2.1 days). According to Neer classification, there were 28 cases of two-part fractures and 36 cases of three-part fractures. According to the angulation direction of the proximal humeral neck shaft angle, there were 21 cases of adduction fractures and 43 cases of abduction fractures. The fractures were treated with limited open reduction via "door-shaft method" and proximal humerus internal locking systems for internal fixation. The operation time, intraoperative blood loss, number of fluoroscopy, hospital stay, and complications were recorded. The fracture healing was reviewed by X-ray film and the healing time was recorded. The shoulder joint function was evaluated by Neer score standard. RESULTS: The operation time was 45-127 minutes, with an average of 82.3 minutes. The intraoperative blood loss was 30-125 mL, with an average of 62.7 mL. Intraoperative fluoroscopy was performed 30-69 times, with an average of 37.0 times. The hospital stay was 6-23 days, with an average of 10.3 days. All incisions healed by first intention. All patients were followed up 12-37 months, with an average of 18.3 months. X-ray film re-examination showed that all fractures healed, the healing time was 12-21 weeks, with an average of 14.3 weeks. After operation, 3 cases had shoulder stiffness and 1 case had fracture malunion. At last follow-up, the Neer score of shoulder joint function was 49-97, with an average of 83.1. Among them, 38 cases were excellent, 13 cases were good, 10 cases were fair, and 3 cases were poor. The excellent and good rate was 79.7%. The excellent and good rate of patients with two-part fractures was 82.1% (23/28), and the excellent and good rate of patients with three-part fractures was 77.8% (28/36). CONCLUSION: The "door-shaft method" not only reduces the difficulty of the Joystick technique in the reduction of proximal humerus fractures, but also provides auxiliary stability. It is used for limited open reduction and internal fixation with locking plate to treat the two- and three-part fractures of the proximal humerus, which can achieve good effectiveness.

High-Amylose Corn Starch/Konjac Glucomannan Composite Film: Reinforced by Incorporating ß-Cyclodextrin.

Glycerol-plasticized high-amylose corn starch/konjac glucomannan (HCS/KGM) composite films incorporated with various concentrations of ß-cyclodextrin (ß-CD) were prepared and investigated for structural, mechanical, and physical properties. The results of X-ray diffraction, attenuated total reflectance Fourier transform infrared spectroscopy, thermogravimetric analyses, and scanning electron microscopy indicated that ß-CD excluded from the polymer chains and aggregated to form crystals during film formation, which drove HCS to interact with KGM more compactly. The thickness and transparency of the films increased after ß-CD was incorporated. More associations of HCS/KGM enhanced the mechanical properties and reduced the moisture content of the films. The water vapor permeability of the HCS/KGM composite film was also improved significantly with the incorporation of ß-CD. The enhanced association between biopolymers in the presence of ß-CD will advance the development of a degradable active composite packaging film.

Formation of high amylose corn starch/konjac glucomannan composite film with improved mechanical and barrier properties.

Recently, starch-based packaging materials have become one of research hot points. In the present study, glycerol-plasticized composite films based on high amylose corn starch (HCS) and konjac glucomannan (KGM) were developed. The influence of KGM on the film-forming properties of HCS and the physicochemical properties of the resulting films were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric (TG) analysis and water vapor permeability (WVP). The crystallinity and the proportion of short-range order structure of the films increased first and then declined with the addition of KGM. The micromorphology of the films exhibited the more even texture after KGM was incorporated in. The tensile strength, elongation at break and water resistance of HCS film were also improved significantly. The synergistic effect between HCS and KGM improved the film-forming ability of HCS. The optimal addition amount of KGM was 0.3 %.