Lattice Oxygen in Photocatalytic Gas‒Solid Reactions: Participator vs. Dominator.

Lattice-oxygen activation has emerged as a popular strategy for optimizing the performance and selectivity of oxide-based thermocatalysis and electrolysis. However, the significance of lattice oxygen in oxide photocatalysts has been ignored, particularly in gas‒solid reactions. Here, using methane oxidation over a Ru1@ZnO single-atom photocatalyst as the prototypical reaction and via 18O isotope labelling techniques, we found that lattice oxygen can directly participate in gas‒solid reactions. Lattice oxygen played a dominant role in the photocatalytic reaction, as determined by estimating the kinetic constants in the initial stage. Furthermore, we discovered that dynamic diffusion between O2 and lattice oxygen proceeded even in the absence of targeted reactants. Finally, single-atom Ru can facilitate the activation of adsorbed O2 and the subsequent regeneration of consumed lattice oxygen, thus ensuring high catalyst activity and stability. The results provide guidance for next-generation oxide photocatalysts with improved activities and selectivities.

Evolution of Naturally Dried MXene-Based Composite Aerogels with Flash Joule Annealing for Large-Scale Production of Highly Sensitive Customized Sensors.

MXene aerogels, known for good electrical properties, offer immense potential for the development of high-sensitivity pressure sensors. However, the intrinsic challenges stemming from the poor self-assembly capability and high hydrophilicity of MXene impedes the natural drying process of MXene-based hydrogels, thereby constraining their application on a large-sacle in sensor technology. Herein, we propose a graphene-assisted approach aimed at modulating the hydrophobicity and enhancing framework strength of MXene through a well-designed prefreezing technique incorporating three-dimensional (3D) spherical macro-porous structures. This synergistic strategy enables the fabrication of naturally dried MXene aerogels across various size scales. Moreover, the integration of 3D spherical macro-porous structures improves elasticity and electrical responsiveness of aerogels. Consequently, the aerogel sensor exhibits great performances, including high sensitivity (1250 KPa-1), low detection limit (0.4 Pa), wide frequency response range (0.1-8 Hz), and excellent stability (1000 cycles). This sensor proves adept at monitoring pressure signals ranging from lightweight paper to human motion. Additionally, the application of customized laser engraving endows aerogels with unique functionalities, such as compressibility and immunity to strain, stretchability and resistance to compression, as well as wind detection. Thus, our proposed approach holds significant promise as a scalable method for the mass production of aerogels with versatile applications. This article is protected by copyright. All rights reserved.

Thermal-Stabilized Protonated TiO2 for Heat-Accelerated Photoelectrochemical Water Splitting.

Enhancing the charge separation efficiency is a big challenge that limits the energy conversion efficiency of photoelectrochemical (PEC) water splitting. Surface states generated by protonation of TiO2 are the efficient charge separation passageways to massively accept or transfer the photogenerated electrons. However, a challenge is to avoid the deprotonation of a protonated TiO2 photoelectrode at the operation temperature. Here, we found that the terminal hydroxyl group (OHT) as surface states on the TiO2 surface generated via electrochemical protonation of TiO2 at 90 °C [90-TiO2-x-(OH)x] is thermally stable. As a result, the thermally enhanced photocurrent of the 90-TiO2-x-(OH)x electrode reached 1.05 mA cm-2 under 80 °C, and the stability was maintained up to 10 h with a slight photocurrent decrease of 3%. The thermally stable surface states as charge separation paths provide an effective method to couple the heat field with the PEC process via thermal-stimulating hopping of polarons.

Stable CO2reduction under natural air on Ni-Sn hydroxide photocatalyst with dynamic renewable oxygen vacancies.

Advanced photocatalysts are highly desired to activate the photocatalytic CO2reduction reaction (CO2RR) with low concentration. Herein, the NiSn(OH)6with rich surface lattice hydroxyls was synthesized to boost the activity directly under the natural air. Results showed that terminal Ni-OH could serve as donors to feed protons and generate oxygen vacancies (VO), thus beneficial to convert the activated CO2(HCO3-) mainly into CO (5.60µmol g-1) in the atmosphere. It was flexible and widely applicable for a stable CO2RR from high pure to air level free of additionally adding H2O reactant, and higher than the traditional gas-liquid-solid (1.58µmol g-1) and gas-solid (4.07µmol g-1) reaction system both using high pure CO2and plenty of H2O. The strong hydrophilia by the rich surface hydroxyls allowed robust H2O molecule adsorption and dissociation at VOsites to achieve the Ni-OH regeneration, leading to a stable CO yield (11.61µmol g-1) with the enriched renewable VOregardless of the poor CO2and H2O in air. This work opens up new possibilities for the practical application of natural photosynthesis.

Photothermal CO2 Catalysis toward the Synthesis of Solar Fuel: From Material and Reactor Engineering to Techno-Economic Analysis.

Carbon dioxide (CO2), a member of greenhouse gases, contributes significantly to maintaining a tolerable environment for all living species. However, with the development of modern society and the utilization of fossil fuels, the concentration of atmospheric CO2 has increased to 400 ppm, resulting in a serious greenhouse effect. Thus, converting CO2 into valuable chemicals is highly desired, especially with renewable solar energy, which shows great potential with the manner of photothermal catalysis. In this review, recent advancements in photothermal CO2 conversion are discussed, including the design of catalysts, analysis of mechanisms, engineering of reactors, and the corresponding techno-economic analysis. A guideline for future investigation and the anthropogenic carbon cycle are provided.

Layered High-Entropy Metallic Glasses for Photothermal CO2 Methanation.

High entropy alloys and metallic glasses, as two typical metastable nanomaterials, have attracted tremendous interest in energy conversion catalysis due to their high reactivity in nonequilibrium states. Herein, a novel nanomaterial, layered high entropy metallic glass (HEMG), in a higher energy state than low-entropy alloys and its crystalline counterpart due to both the disordered elemental and structural arrangements, is synthesized. Specifically, the MnNiZrRuCe HEMG exhibits highly enhanced photothermal catalytic activity and long-term stability. An unprecedented CO2 methanation rate of 489 mmol g-1 h-1 at 330 °C is achieved, which is, to the authors' knowledge, the highest photothermal CO2 methanation rate in flow reactors. The remarkable activity originates from the abundant free volume and high internal energy state of HEMG, which lead to the extraordinary heterolytic H2 dissociation capacity. The high-entropy effect also ensures the excellent stability of HEMG for up to 450 h. This work not only provides a new perspective on the catalytic mechanism of HEMG, but also sheds light on the great catalytic potential in future carbon-negative industry.

Continuous strain tuning of oxygen evolution catalysts with anisotropic thermal expansion.

Compressive strain, downshifting the d-band center of transition metal oxides, is an effective way to accelerate the sluggish kinetics of oxygen evolution reaction (OER) for water electrolysis. Here, we find that anisotropic thermal expansion can produce compressive strains of the IrO6 octahedron in Sr2IrO4 catalyst, thus downshifting its d-band center. Different from the previous strategies to create constant strains in the crystals, the thermal-triggered compressive strains can be real-timely tuned by varying temperature. As a result of the thermal strain accelerating OER kinetics, the Sr2IrO4 exhibits the nonlinear lnjo - T-1 (jo, exchange current density; T, absolute temperature) Arrhenius relationship, resulting from the thermally induced low-barrier electron transfer in the presence of thermal compressive strains. Our results verify that the thermal field can be utilized to manipulate the electronic states of Sr2IrO4 via thermal compressive strains downshifting the d-band center, significantly accelerating the OER kinetics, beyond the traditional thermal diffusion effects.

ZIF-derived oxygen vacancy-rich Co3O4 for constructing an efficient Z-scheme heterojunction to boost photocatalytic water splitting.

With ZIF-67 as the precursor, oxygen vacancy-rich Co3O4 nanoparticles were derived and anchored on the surface of 2D polyimide (PI) to construct a Z-scheme hybrid heterojunction (20ZP) through a simultaneous solvothermal in situ crystallization and polymerization strategy. XRD, XPS and EPR confirmed that both Co(III) and oxygen vacancies are formed during the low temperature conversion of ZIF-67 to Co3O4 nanoparticles that in turn accelerate the polymerization of PI. Synchronous crystallization makes the interfacial architecture intermetal and compact, inducing a strong interfacial electronic interaction between Co3O4 nanoparticles and PI. UV-vis DRS spectra and transient photocurrent response demonstrate that the incorporation of Co3O4 on polyimide not only extends the light absorption in the visible range, but also enhances the charge transfer rate. EIS, TRPL techniques and DFT calculations have confirmed that the photoinduced interfacial charge transfer pathway of this hybrid heterojunction characterized the Z-scheme in which the photoinduced electrons transfer from the conduction band of Co3O4 to the valence band of PI, significantly inhibiting the recombination of electrons and holes within PI. More importantly, the oxygen vacancies located below the conductor band of Co3O4 can deepen the band bending, improve the charge separation efficiency and accelerate electron transfer between Co3O4 and PI. This Z-scheme hybrid heterojunction structure can not only maintain the high reducing capacity of photoinduced electrons on the conductor band of PI, but also enhance the oxidative capacity of the heterojunction composite material, thus promoting the overall progress of the photocatalytic hydrogen release reaction.

Trivalent Nickel-Catalyzing Electroconversion of Alcohols to Carboxylic Acids.

The comprehension of activity and selectivity origins of the electrooxidation of organics is a crucial knot for the development of a highly efficient energy conversion system that can produce value-added chemicals on both the anode and cathode. Here, we find that the potential-retaining trivalent nickel in NiOOH (Fermi level, -7.4 eV) is capable of selectively oxidizing various primary alcohols to carboxylic acids through a nucleophilic attack and nonredox electron transfer process. This nonredox trivalent nickel is highly efficient in oxidizing primary alcohols (methanol, ethanol, propanol, butanol, and benzyl alcohol) that are equipped with the appropriate highest occupied molecular orbital (HOMO) levels (-7.1 to -6.5 eV vs vacuum level) and the negative dual local softness values (Δsk, -0.50 to -0.19) of nucleophilic atoms in nucleophilic hydroxyl functional groups. However, the carboxylic acid products exhibit a deeper HOMO level (<-7.4 eV) or a positive Δsk, suggesting that they are highly stable and weakly nucleophilic on NiOOH. The combination (HOMO, Δsk) is useful in explaining the activity and selectivity origins of electrochemically oxidizing alcohols to carboxylic acid. Our findings are valuable in creating efficient energy conversions to generate value-added chemicals on dual electrodes.

Emerging Strategies for the Synthesis of Correlated Single Atom Catalysts.

People have been looking for an energy-efficient and sustainable method to produce future chemicals for decades. Heterogeneous single-atom catalysts (SACs) with atomic dispersion of robust, well-characterized active centers are highly desirable. In particular, correlated SACs with cooperative interaction between adjacent single atoms allow the switching of the single-site pathway to the dual or multisite pathway, thus promoting bimolecular or more complex reactions for the synthesis of fine chemicals. Herein, the structural uniqueness of correlated SACs, including the intermetal distance and electronic interaction in homo/heteronuclear metal sites is featured. Recent advances in the production methods of correlated SACs, showcasing the research status and challenges in traditional methods (such as pyrolysis, wet impregnation, and confined synthesis) for building a comprehensive multimetallic SAC library, are summarized. Emerging strategies such as process automation and continuous-flow synthesis are highlighted, minimizing the inconsistency in laboratory batch production and allowing high throughput screening and upscaling toward the next-stage chemical production by correlated SACs.

Unraveling the Transformation from Type-II to Z-Scheme in Perovskite-Based Heterostructures for Enhanced Photocatalytic CO2 Reduction.

The ability to create perovskite-based heterostructures with desirable charge transfer characteristics represents an important endeavor to render a set of perovskite materials and devices with tunable optoelectronic properties. However, due to similar material selection and band alignment in type-II and Z-scheme heterostructures, it remains challenging to obtain perovskite-based heterostructures with a favorable electron transfer pathway for photocatalysis. Herein, we report a robust tailoring of effective charge transfer pathway in perovskite-based heterostructures via a type-II to Z-scheme transformation for highly efficient and selective photocatalytic CO2 reduction. Specifically, CsPbBr3/TiO2 and CsPbBr3/Au/TiO2 heterostructures are synthesized and then investigated by ultrafast spectroscopy. Moreover, taking CsPbBr3/TiO2 and CsPbBr3/Au/TiO2 as examples, operando experiments and theoretical calculations confirm that the type-II heterostructure could be readily transformed into a Z-scheme heterostructure through establishing a low-resistance Ohmic contact, which indicates that a fast electron transfer pathway is crucial in Z-scheme construction, as further demonstrated by CsPbBr3/Ag/TiO2 and CsPbBr3/MoS2 heterostructures. In contrast to pristine CsPbBr3 and CsPbBr3/TiO2, the CsPbBr3/Au/TiO2 heterostructure exhibits 5.4- and 3.0-fold enhancement of electron consumption rate in photocatalytic CO2 reduction. DFT calculations and in situ diffuse reflectance infrared Fourier transform spectroscopy unveil that the superior CO selectivity is attributed to the lower energy of *CO desorption than that of hydrogenation to *HCO. This meticulous design sheds light on the modification of perovskite-based multifunctional materials and enlightens conscious optimization of semiconductor-based heterostructures with desirable charge transfer for catalysis and optoelectronic applications.

Iron 3D-Orbital Configuration Dependent Electron Transfer for Efficient Fenton-Like Catalysis.

Transition metals are excellent active sites to activate peroxymonosulfate (PMS) for water treatment, but the favorable electronic structures governing  reaction mechanism still remain elusive. Herein, the authors construct typical d-orbital configurations on iron octahedral (FeOh ) and tetrahedral (FeTd ) sites in spinel ZnFe2 O4 and FeAl2 O4 , respectively. ZnFe2 O4 (136.58 min-1 F-1 cm2 ) presented higher specific activity than FeAl2 O4 (97.47 min-1 F-1 cm2 ) for tetracycline removal by PMS activation. Considering orbital features of charge amount, spin state, and orbital arrangement by magnetic spectroscopic analysis, ZnFe2 O4 has a larger bond order to decompose PMS. Using this descriptor, high-spin FeOh is assumed to activate PMS mainly to produce nonradical reactive oxygen species (ROS) while high-spin FeTd prefers to induce radical species. This hypothesis is confirmed by the selective predominant ROS of 1 O2 on ZnFe2 O4 and O2 •- on FeAl2 O4 via quenching experiments. Electrochemical determinations reveal that FeOh has superior capability than FeTd for feasible valence transformation of iron cations and fast interfacial electron transfer. DFT calculations further suggest octahedral d-orbital configuration of ZnFe2 O4 is beneficial to enhancing Fe-O covalence for electron exchange. This work attempts to understand the d-orbital configuration-dependent PMS activation to design efficient catalysts.

Stacking textured films on lattice-mismatched transparent conducting oxides via matched Voronoi cell of oxygen sublattice.

Transparent conducting oxides are a critical component in modern (opto)electronic devices and solar energy conversion systems, and forming textured functional films on them is highly desirable for property manipulation and performance optimization. However, technologically important materials show varied crystal structures, making it difficult to establish coherent interfaces and consequently the oriented growth of these materials on transparent conducting oxides. Here, taking lattice-mismatched hexagonal α-Fe2O3 and tetragonal fluorine-doped tin oxide as the example, atomic-level investigations reveal that a coherent ordered structure forms at their interface, and via an oxygen-mediated dimensional and chemical-matching manner, that is, matched Voronoi cells of oxygen sublattices, [110]-oriented α-Fe2O3 films develop on fluorine-doped tin oxide. Further measurements of charge transport characteristics and photoelectronic effects highlight the importance and advantages of coherent interfaces and well-defined orientation in textured α-Fe2O3 films. Textured growth of lattice-mismatched oxides, including spinel Co3O4, fluorite CeO2, perovskite BiFeO3 and even halide perovskite Cs2AgBiBr6, on fluorine-doped tin oxide is also achieved, offering new opportunities to develop high-performance transparent-conducting-oxide-supported devices.

Thermal suppression of charge disproportionation accelerates interface electron transfer of water electrolysis.

The sluggish electron transfer kinetics in electrode polarization driven oxygen evolution reaction (OER) result in big energy barriers of water electrolysis. Accelerating the electron transfer at the electrolyte/catalytic layer/catalyst bulk interfaces is an efficient way to improve electricity-to-hydrogen efficiency. Herein, the electron transfer at the Sr3Fe2O7@SrFeOOH bulk/catalytic layer interface is accelerated by heating to eliminate charge disproportionation from Fe4+ to Fe3+ and Fe5+ in Sr3Fe2O7, a physical effect to thermally stabilize high-spin Fe4+ (t2g3eg1), providing available orbitals as electron transfer channels without pairing energy. As a result of thermal-induced changes in electronic states via thermal comproportionation, a sudden increase in OER performances was achieved as heating to completely suppress charge disproportionation, breaking a linear Arrhenius relationship. The strategy of regulating electronic states by thermal field opens a broad avenue to overcome the electron transfer barriers in water splitting.

Regulating Lewis Acidic Sites of 1T-2H MoS2 Catalysts for Solar-Driven Photothermal Catalytic H2 Production from Lignocellulosic Biomass.

Solar-driven photothermal catalytic H2 production from lignocellulosic biomass was achieved by using 1T-2H MoS2 with tunable Lewis acidic sites as catalysts in an alkaline aqueous solution, in which the number of Lewis acidic sites derived from the exposed Mo edges of MoS2 was successfully regulated by both the formation of an edge-terminated 1T-2H phase structure and tunable layer number. Owing to the abundant Lewis acidic sites for the oxygenolysis of lignocellulosic biomass, the 1T-2H MoS2 catalyst shows high photothermal catalytic lignocellulosic biomass-to-H2 transformation performance in polar wood chips, bamboo, rice straw corncobs, and rice hull aqueous solutions, and the highest H2 generation rate and solar-to-H2 (STH) efficiency respectively achieves 3661 µmol·h-1·g-1 and 0.18% in the polar wood chip system under 300 W Xe lamp illumination. This study provides a sustainable and cost-effective method for the direct transformation of renewable lignocellulosic biomass to H2 fuel driven by solar energy.

Tandem Synergistic Effect of Cu-In Dual Sites Confined on the Edge of Monolayer CuInP2 S6 toward Selective Photoreduction of CO2 into Multi-Carbon Solar Fuels.

One-unit-cell, single-crystal, hexagonal CuInP2 S6 atomically thin sheets of≈0.81 nm in thickness was successfully synthesized for photocatalytic reduction of CO2 . Exciting ethene (C2 H4 ) as the main product was dominantly generated with the yield-based selectivity reaching ≈56.4 %, and the electron-based selectivity as high as ≈74.6 %. The tandem synergistic effect of charge-enriched Cu-In dual sites confined on the lateral edge of the CuInP2 S6 monolayer (ML) is mainly responsible for efficient conversion and high selectivity of the C2 H4 product as the basal surface site of the ML, exposing S atoms, can not derive the CO2 photoreduction due to the high energy barrier for the proton-coupled electron transfer of CO2 into *COOH. The marginal In site of the ML preeminently targets CO2 conversion to *CO under light illumination, and the *CO then migrates to the neighbor Cu sites for the subsequent C-C coupling reaction into C2 H4 with thermodynamic and kinetic feasibility. Moreover, ultrathin structure of the ML also allows to shorten the transfer distance of charge carriers from the interior onto the surface, thus inhibiting electron-hole recombination and enabling more electrons to survive and accumulate on the exposed active sites for CO2 reduction.

Nonredox trivalent nickel catalyzing nucleophilic electrooxidation of organics.

A thorough comprehension of the mechanism behind organic electrooxidation is crucial for the development of efficient energy conversion technology. Here, we find that trivalent nickel is capable of oxidizing organics through a nucleophilic attack and electron transfer via a nonredox process. This nonredox trivalent nickel exhibits exceptional kinetic efficiency in oxidizing organics that possess the highest occupied molecular orbital energy levels ranging from -7.4 to -6 eV (vs. Vacuum level) and the dual local softness values of nucleophilic atoms in nucleophilic functional groups, such as hydroxyls (methanol, ethanol, benzyl alcohol), carbonyls (formamide, urea, formaldehyde, glucose, and N-acetyl glucosamine), and aminos (benzylamine), ranging from -0.65 to -0.15. The rapid electrooxidation kinetics can be attributed to the isoenergetic channels created by the nucleophilic attack and the nonredox electron transfer via the unoccupied eg orbitals of trivalent nickel (t2g6eg1). Our findings are valuable in identifying kinetically fast organic electrooxidation on nonredox catalysts for efficient energy conversions.

Potential window alignment regulating ion transfer in faradaic junctions for efficient photoelectrocatalysis.

In the past decades, a band alignment theory has become a basis for designing different high-performance semiconductor devices, such as photocatalysis, photoelectrocatalysis, photoelectrostorage and third-generation photovoltaics. Recently, a faradaic junction model (coupled electron and ion transfer) has been proposed to explain charge transfer phenomena in these semiconductor heterojunctions. However, the classic band alignment theory cannot explain coupled electron and ion transfer processes because it only regulates electron transfer. Therefore, it is very significant to explore a suitable design concept for regulating coupled electron and ion transfer in order to improve the performance of semiconductor heterojunctions. Herein, we propose a potential window alignment theory for regulating ion transfer and remarkably improving the photoelectrocatalytic performance of a MoS2/Cd-Cu2ZnSnS4 heterojunction photocathode. Moreover, we find that a faradaic potential window, rather than the band position of the intermediate layer, is a criterion for identifying interface charge transfer direction. This finding can offer different perspectives for designing high-performance semiconductor heterojunctions with suitable potential windows for solar energy conversion and storage.