Protection of Thiol Groups on the Surface of Magnetic Adsorbents and Their Application for Wastewater Treatment.

The magnetite nanoparticles were functionalized with silica shells bearing mercaptopropyl (monofunctional) and mercaptopropyl-and-alkyl groups (bifunctional) by single-step sol-gel technique. The influence of synthetic conditions leading to increased amounts of active functional groups on the surface and improved capacity in the uptake of Ag(I), Cd(II), Hg(II), and Pb(II) cations was revealed. The physicochemical properties of obtained magnetic nanocomposites were investigated by FTIR, Raman, XRD, TEM, SEM, low-temperature nitrogen ad-/desorption measurements, TGA, and chemical microanalysis highlighting the efficiency of functionalization and mechanisms of the preparation procedures. The removal of the main group of heavy metal cations was studied in dependence from the pH, contact time and equilibrium concentration to analyze the complexes composition for the large scale production of improved adsorbents. It was demonstrated that introduction of the alkyl groups into the surface layer prevents the formation of the disulfide bonds between adjacent thiol groups. The obtained adsorbents were employed to treat real wastewater from Ruskov, Slovakia with concentration of Fe 319 ng/cm3, Cu 23.7 ng/cm3, Zn 36 ng/cm3, Mn 503 ng/cm3, Al 21 ng/cm3, As 34 ng/cm3, Pb 5.8 ng/cm3, Ni 35 ng/cm3, Co 4.2 ng/cm3, Cr 9.4 ng/cm3, Sb 6 ng/cm3, Cd 5 ng/cm3. These materials proved to be highly effective in the removal of 50% of all metal ions, espeсially Zn, Cd, and Pb ions from it and turned recyclable, opening for their sustainable use in water purification.

Tailoring bifunctional hybrid organic-inorganic nanoadsorbents by the choice of functional layer composition probed by adsorption of Cu2+ ions.

Spherical silica particles with bifunctional (≡Si(CH2)3NH2/≡SiCH3, ≡Si(CH2)3NH2/≡Si(CH2)2(CF2)5CF3) surface layers were produced by a one-step approach using a modified Stöber method in three-component alkoxysilane systems, resulting in greatly increased contents of functional components. The content of functional groups and thermal stability of the surface layers were analyzed by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, and 13C and 29Si solid-state NMR spectroscopy revealing their composition and organization. The fine chemical structure of the surface in the produced hybrid adsorbent particles and the ligand distribution were further investigated by electron paramagnetic resonance (EPR) and electron spectroscopy of diffuse reflectance (ESDR) spectroscopy using Cu2+ ion coordination as a probe. The composition and structure of the emerging surface complexes were determined and used to provide an insight into the molecular structure of the surfaces. It was demonstrated that the introduction of short hydrophobic (methyl) groups improves the kinetic characteristics of the samples during the sorption of copper(II) ions and promotes fixation of aminopropyl groups on the surface of silica microspheres. The introduction of long hydrophobic (perfluoroctyl) groups changes the nature of the surface, where they are arranged in alternately hydrophobic/hydrophilic patches. This makes the aminopropyl groups huddled and less active in the sorption of metal cations. The size and aggregation/morphology of obtained particles was optimized controlling the synthesis conditions, such as concentrations of reactants, basicity of the medium, and the process temperature.

Magneto-Sensitive Adsorbents Modified by Functional Nitrogen-Containing Groups.

In order to obtain amino-functionalized silica materials with magnetic core, one-step synthesis was carried out. Several materials, differ in number and structure of amino groups, were synthesized on the basis of sol-gel method. The synthesized materials were examined by several analytical techniques. The presence and content of amino groups were measured by using Diffuse Reflectance Infrared Fourier Transform (DRIFT) spectroscopy and acid-base titration, respectively. Specific surface areas were measured by nitrogen/adsorption desorption isotherms. It was proved that sol-gel approach leads to obtain materials with high content of amino groups built into their surfaces (in the range 1.6-2.7 mmol/g). As-obtained materials were tested as potential adsorbents for copper(II) ions. The received maximum adsorption capacities were in the range 0.4-0.7 mmol/g.

Mesoporous silica containing ≡Si(CH2)3NHC(S)NHC2H5 functional groups in the surface layer.

One-step synthesis technique of mesoporous SBA-15 type silica with thiourea ≡Si(CH(2))(3)NHC(S)NHC(2)H(5) groups in the surface layer was developed. According to elemental analysis, the content of surface groups is 1.25 mmol/g, which is consistent with TGA data. FT-IR spectra of the obtained sample contain characteristic absorption bands of thiourea groups (-NH-C(S)-NH-), as well as polysiloxane network (SiOSi). The synthesized sample was studied by XRD, TEM, SEM, and adsorption method. It was demonstrated that the sample features porous microspheres ~0.5 µm with well-ordered internal spatial structure of the hexagonal lattice type due to the usage of template P123 during synthesis. According to XRD and TEM, the diameter of pores is 4.2-5 nm and the wall thickness between them is 2.6 nm. These data are consistent with the structural-adsorption characteristics calculated from nitrogen adsorption-desorption isotherms: S(sp.)=510 m(2)/g, V(s)=0.47 cm(3)/g, and d=4.3 nm. Equilibrium is established within 60 min during sorption of silver(І) and mercury(ІІ) ions from acidified aqueous solutions for this sample, and with the complexes are formed 1.1/1 for Ag(+) and 0.8/1 for Hg(2+) at metal/ligand ratio.