RESUMO
The aim of this study was to use the malt bagasse by-product for developing high-dietary fibers cereal bars. Three formulations were tested and contained 0% (control), 19% and 24% of malt bagasse. The bars with malt bagasse were rich in dietary fiber and protein, with 6.06 and 26.35 g/100 g, respectively for samples with 19% of bagasse, and 8.43 and 26.22 g/100 g, respectively, for bars with 24% of this by-product. The total phenol content (TPC) of the bars with 19 and 24% of bagasse, was 100.37 and 192.13 mg GAE/100 g of sample, and the EC50 was 21.58 and 14.78 mg/mL (DPPH assay), respectively. The incorporation of this by-product into the formulations enhanced their TPC and antioxidant capacity. These samples had a high sensory acceptance. The formulation with the lowest malt bagasse concentration showed high global acceptance (56%) and purchase intention. The sensory attributes that pleased the tasters the most, rated as "liked moderately," were the color and odor of both bars. Cereal bars showed an improved nutritional composition and antioxidant capacity after malt bagasse addition, and the formulation with 19% should be the best choice among the tested formulations, when considering the set of nutritional and sensory aspects. The malt bagasse was successfully valorized as an ingredient in a functional food, whilst contributing to the environment.
RESUMO
The present work concerns to investigate the microbiological, thermal and mechanical behavior of cellulose acetate films obtained with addition of 0.5 % (v/v) and 1.0 % (v/v) of geranyl acetate by the casting technique. The antimicrobial activities of the polymeric films were assessed against Staphylococcus aureus and Escherichia coli bacteria and against Aspergillus flavus fungal. The achieved results show that the films presented antibacterial and antifungal activities. Moreover, the incorporation of the geranyl acetate in the polymeric films was confirmed by FTIR and TGA technique, while DSC analysis pointed out the compatibility between the geranyl acetate and cellulose acetate. The addition of the geranyl acetate did not modify the mechanical behavior of the cellulose acetate films concerning stiffness and tensile strength. These results suggest that this new material is promising for future applications in biomedical devices and food packaging.
Assuntos
Antibacterianos , Celulose , Antibacterianos/farmacologia , Acetatos , Embalagem de Alimentos , PolímerosRESUMO
The demand for food has intensified production in agricultural areas and stimulated the use of nanotechnology to develop new inputs, especially nanoparticle materials. In this new context, predicting the impact of using nanoparticles on non-target organisms becomes a necessary measure. The aim of this study was to evaluate the ecotoxicological potential of magnesium (Mg2+ ) added via magnesium oxide nanoparticles (MgO-NPs), magnesium oxide (MgO), and magnesium nitrate hexahydrate (Mg [NO3 ]2 ·6H2 O) incubated over time in tropical soil on earthworms (Eisenia andrei), springtails (Folsomia candida), and enchytraeids (Enchytraeus crypticus). Tests were conducted using a clay-textured Latossolo Vermelho distrófico (Oxisol), which received increasing doses of Mg2+ (0; 25; 50; 100; 200 and 400 mg kg−1 of soil) from the three sources tested added to the soil. Treated soil was incubated for 120 days in a room with controlled temperature and photoperiod, and the ecotoxicological tests were performed at 0, 60, and 120 days of incubation. Despite having caused reduction in the reproduction of F. candida at the incubation time 0, MgO-NPs showed a low toxic potential against the other species studied, with toxicity only at a higher dose of 50 mg Mg kg−1 when compared to the other sources of Mg2+ applied to the soil (MgO and Mg [NO3 ]2 ·6H2 O). Responses associated with incubation times showed that all magnesium sources tested have lower toxicity over incubation time.
Assuntos
Nanopartículas , Poluentes do Solo , Ecotoxicologia , Óxido de Magnésio , Nanopartículas/toxicidade , Solo , Poluentes do Solo/análise , Poluentes do Solo/toxicidadeRESUMO
Phenol degradation was studied in two different agitation systems in a batc h reactor (mechanical agitation and orbital agitation) and the support of the most efficient system was used for fixed bed bioreactor studies. The support used was coconut shell charcoal. The results showed that the mechanical agitation bioreactor was more effective in phenol removal, due to the amount of biomass adhered to the support (8.56 mg gsupport-1), running at approximately 100% of the phenol biodegradation in 300 min. The toxicity analysis of the waters was moderate, because the EC50,48h values in the analyzed samples are higher than 50%. Within the experimental data obtained from the batch system, it was possible to find the parameters of the kinetic model of Michaelis-Menten, which was used to simulate the bioreactor in a fixed bed. A mathematical model of a one-equation, which considers the effects of dispersion, convection, and reaction in the liquid phase, and diffusion and reaction inside the biofilm was used and the results obtained through numerical simulation were compared with the experimental results of the bioreactor in a fixed bed, and new operational conditions in the bed were simulated with good accuracy.
Assuntos
Reatores Biológicos , Fenol , Biodegradação Ambiental , Biofilmes , Cinética , Modelos Teóricos , FenóisRESUMO
INTRODUÇÃO: Os setores climatizados, no ramo de indústrias alimentícias, apresentam variações de temperatura de -35 a 12ºC, as quais são necessárias para garantir a qualidade dos alimentos. Entretanto, essa faixa de temperatura pode ser um agente nocivo para a saúde dos trabalhadores. OBJETIVO:Estudar os parâmetros de exposição ocupacional ao risco frio para estimar o índice de isolamento térmico e determinar a eficácia dos equipamentos de proteção individual. MÉTODOS: Na primeira etapa foram avaliadas as variáveis ambientais (temperatura do ar, velocidade do ar, umidade relativa do ar) e a taxa de metabolismo; na segunda etapa foi determinado o índice de isolamento térmico fornecido; e na terceira etapa foi calculado o índice de isolamento básico de vestuário exigido para manter o equilíbrio térmico e verificada a eficácia dos equipamentos de proteção individual. RESULTADOS: Embora a temperatura do ar seja inferior nas atividades desenvolvidas no túnel de congelamento no setor de embalagem secundária, comparando com as atividades realizadas na câmara de estocagem de operar empilhadeira e transportar produtos, o índice de isolamento básico de vestuário exigido é maior nas atividades desenvolvidas com uso de empilhadeira, mesmo a temperatura sendo superior. Isso ocorre em função da velocidade do ar ser superior nas atividades realizadas nas empilhadeiras. CONCLUSÕES: Em 83,3% das atividades avaliadas a proteção se mostrou eficaz, porém, existe a possibilidade dos indivíduos sentirem desconforto térmico devido ao excesso de roupa fornecida. Apesar de a proteção ser insuficiente em 16,7%, as pausas de recuperação térmica eliminam o risco de hipotermia.
BACKGROUND: The temperature of climate controlled areas in the food industry varies from -35ºC to 12ºC to ensure the quality of food. However, this temperature range might be harmful to the health of workers. OBJECTIVE: To analyze parameters related to occupational exposure to cold risks to calculate clothing insulation indices and establish the efficacy of personal protective equipment (PPE). METHODS: In stage 1 we analyzed environmental variables (air temperature and velocity and relative humidity) and the metabolic rate; in stage 2 we calculated the resultant clothing insulation index; in stage 3 we calculated the basic clothing insulation required to maintain the thermal balance and investigated the efficacy of PPE. RESULTS: While the air temperature was lower for activities developed in the freezing tunnel (secondary packaging department), required basic clothing insulation was higher for activities involving operating forklifts. CONCLUSION: Protection was efficacious for 83.3% of the analyzed activities, however, occurrence of thermal discomfort cannot be ruled out as a function of excessive clothing. Although protection was insufficient for 16.7% of the analyzed activities, breaks for thermal recovery neutralized the risk of hypothermia.
RESUMO
The present study investigated the encapsulation process of garlic oil in ßcyclodextrin (ßCD) and the antibacterial properties of the ßCD-garlic oil complex against Escherichia coli and Staphylococcus aureus. The encapsulation method increased the thermal stability of garlic oil with a formation constant (Kc) value of 253.78â¯L·mol-1 for of the ßCD-garlic oil complex, which confirmed the success of the encapsulation process. Scanning electron microscopy analysis showed that the dimensions of the structures formed by the inclusion complex of ßCD-garlic oil had values ranging from 5 to 10⯵m. After thermal treatment of the ßCD-garlic oil complex at 60⯰C for 1â¯h, the complex retained significant antibacterial action. The minimum inhibitory concentration (MIC) and agar diffusion results showed that the microcapsules containing 81.73â¯mmol·L-1 garlic oil exhibited excellent antibacterial action.
Assuntos
Compostos Alílicos/farmacologia , Antibacterianos/farmacologia , Composição de Medicamentos , Sulfetos/farmacologia , Temperatura , beta-Ciclodextrinas/química , Cápsulas , Escherichia coli/efeitos dos fármacos , Testes de Sensibilidade Microbiana , Solubilidade , Espectrofotometria Ultravioleta , Espectroscopia de Infravermelho com Transformada de Fourier , Staphylococcus aureus/efeitos dos fármacos , TermogravimetriaRESUMO
BACKGROUND: The temperature of climate controlled areas in the food industry varies from -35°C to 12°C to ensure the quality of food. However, this temperature range might be harmful to the health of workers. OBJECTIVE: To analyze parameters related to occupational exposure to cold risks to calculate clothing insulation indices and establish the efficacy of personal protective equipment (PPE). METHODS: In stage 1 we analyzed environmental variables (air temperature and velocity and relative humidity) and the metabolic rate; in stage 2 we calculated the resultant clothing insulation index; in stage 3 we calculated the basic clothing insulation required to maintain the thermal balance and investigated the efficacy of PPE. RESULTS: While the air temperature was lower for activities developed in the freezing tunnel (secondary packaging department), required basic clothing insulation was higher for activities involving operating forklifts. CONCLUSION: Protection was efficacious for 83.3% of the analyzed activities, however, occurrence of thermal discomfort cannot be ruled out as a function of excessive clothing. Although protection was insufficient for 16.7% of the analyzed activities, breaks for thermal recovery neutralized the risk of hypothermia.
INTRODUÇÃO: Os setores climatizados, no ramo de indústrias alimentícias, apresentam variações de temperatura de -35 a 12°C, as quais são necessárias para garantir a qualidade dos alimentos. Entretanto, essa faixa de temperatura pode ser um agente nocivo para a saúde dos trabalhadores. OBJETIVO: Estudar os parâmetros de exposição ocupacional ao risco frio para estimar o índice de isolamento térmico e determinar a eficácia dos equipamentos de proteção individual. MÉTODOS: Na primeira etapa foram avaliadas as variáveis ambientais (temperatura do ar, velocidade do ar, umidade relativa do ar) e a taxa de metabolismo; na segunda etapa foi determinado o índice de isolamento térmico fornecido; e na terceira etapa foi calculado o índice de isolamento básico de vestuário exigido para manter o equilíbrio térmico e verificada a eficácia dos equipamentos de proteção individual. RESULTADOS: Embora a temperatura do ar seja inferior nas atividades desenvolvidas no túnel de congelamento no setor de embalagem secundária, comparando com as atividades realizadas na câmara de estocagem de operar empilhadeira e transportar produtos, o índice de isolamento básico de vestuário exigido é maior nas atividades desenvolvidas com uso de empilhadeira, mesmo a temperatura sendo superior. Isso ocorre em função da velocidade do ar ser superior nas atividades realizadas nas empilhadeiras. CONCLUSÕES: Em 83,3% das atividades avaliadas a proteção se mostrou eficaz, porém, existe a possibilidade dos indivíduos sentirem desconforto térmico devido ao excesso de roupa fornecida. Apesar de a proteção ser insuficiente em 16,7%, as pausas de recuperação térmica eliminam o risco de hipotermia.