Cardanol-based adhesive with reduced formaldehyde emission to produce particleboards with waste from bean crops.

Free formaldehyde is a carcinogen whose emission reduction in particleboard has been studied recently to mitigate this environmental and human health problem. One alternative to reduce the emission of formaldehyde in particleboards is by using adhesives produced from natural sources. Cardanol-formaldehyde is an environmentally friendly adhesive made with cashew nut liquid, a byproduct from the cashew chain. This work aimed to produce particleboard using cardanol-formaldehyde in place of urea. In addition, different proportions of bean straw wastes were used to replace pine wood. The combination of eco-friendly adhesive and lignocellulosic waste particles could result in a product that meets market demands while being environmentally nonaggressive. Cardanol-formaldehyde promoted a higher modulus of elasticity (MOE) (1172 MPa) and modulus of rupture (MOR) (4.39 MPa) about panels glued with urea-formaldehyde, which presented a MOE of 764 MPa and MOR of 2.45 MPa. Furthermore, the cardanol-formaldehyde adhesive promoted a 93% reduction in formaldehyde emission, with a reduction from 16.76 to 1.09 mg/100 g oven-dry board for particleboards produced with cardanol-formaldehyde, indicating potential as an adhesive in the particleboard industry.

Active packaging of poly(lactic acid) nanofibers and essential oils with antifungal action on table grapes.

The table grape is a non-climateric fruit that is very susceptible to fungal contamination, in addition to suffering an accelerated loss of quality during storage. The in vitro and in grape antifungal and antiocratoxigenic effects of the essential oils from Alpinia speciosa and Cymbopogon flexuosus against Aspergillus carbonarius and Aspergillus niger were studied. The oils were encapsulated in poly(lactic acid) (PLA) nanofibers as a potential active packaging to be applied to control the degradation of grapes stored during the post-harvest period. Fungal proliferation and ochratoxin A synthesis in A. carbonarius and A. niger decreased in the presence of the active packaging. However, the nanofiber containing the essential oil from C. flexuosus was more efficient in providing a fungicidal effect against A. carbonarius (10% and 20%) and A. niger (20%). In addition, weight loss and color changes were controlled and the parameters of acidity, °Brix, softening and the texture of the grape were maintained. A very small mass loss of the essential oils encapsulated in nanofibers was observed by thermogravimetric analysis, showing that the nanofiber was efficient in enabling the controlled release. The quality and safety of table grapes were maintained for longer periods of storage in the presence of active packaging, so the incorporation of these oils in nanofibers can be a promising way to increase the shelf life of grapes.

Antifungal and physicochemical properties of Ocimum essential oil loaded in poly(lactic acid) nanofibers.

Poly(lactic acid) (PLA) nanofibres containing different proportions of the essential oils from Ocimum basilicum L. and Ocimum gratissimum L. were prepared by solution blow spinning method. The essential oils were extracted by hydrodistillation and characterized by gas chromatography. MEV, contact angle, DSC and FTIR were used to characterize the nanofibres. The effect of bioative nanofibres on the growth of the fungus and on the production of ochratoxin A were evaluated using the fumigation test. Linalool, 1·8-cineole and camphor were the principal components of the essential oil from O. basilicum, and eugenol was the principal constituent in the oil from O. gratissimum. An increase in the average diameter of the nanofibres was observed with the addition of the essential oils. The essential oils acted as a plasticizer, resulting in a reduction in the crystallinity of the PLA. The encapsulation of essential oils in PLA nanofibres was verified by FTIR. An effective antifungal and antimicotoxygenic activity against Aspergillus ochraceus and Aspergillus westerdjikiae was observed for the bioative nanofibres. These results confirm the potential of PLA nanofibres containing the essential oils for the control of toxigenic fungi that cause the deterioration of food and are harmful to human health.

Effectiveness of Core-Shell Nanofibers Incorporating Amphotericin B by Solution Blow Spinning Against Leishmania and Candida Species.

The aim of this study was to develop polymeric nanofibers for controlled administration of Amphotericin B (AmpB), using the solution centrifugation technique, characterizing its microstructural and physical properties, release rate, and activity against Leishmania and Candida species. The core-shell nanofibers incorporated with AmpB were synthesized by Solution Blow Spinning (SBS) and characterized by scanning electron microscopy (SEM), differential scanning calorimetry, X-Ray diffraction, and drug release assay. In vitro leishmanicidal and antifungal activity were also evaluated. Fibrous membranes with uniform morphology and smooth surfaces were produced. The intensity of the diffraction peaks becomes slightly more pronounced, assuming the increased crystallization in PLA/PEG at high AmpB loadings. Drug release occurred and the solutions with nanofibers to encourage greater incorporation of AmpB showed a higher concentration. In the results of the experiment with promastigotes, the wells treated with nanofibers containing concentrations of AmpB at 0.25, 0.5, and 1%, did not have any viable cells, similar to the positive control. Various concentrations of AmpB improved the inhibition of fungal growth. The delivery system based on PLA/PEG nanofibers was properly developed for AmpB, presenting a controlled release and a successful encapsulation, as well as antifungal and antileishmanial activity.

In vitro growth of Physalis peruviana L. affected by silver nanoparticles.

The effect of silver nanoparticles (AgNPs) on plant cells, since their phytotoxicity potential is not yet fully understood. In this context, the aim of the present study was to elucidate the effects of AgNPs in the in vitro culture of Physalis peruviana. For this purpose, P. peruviana seeds were grown in MS medium supplemented with different concentrations of AgNPs. Growth and development of seedlings were evaluated through germination, seedling size and biomass and biochemical and anatomical analyses. At the end of 60 days of cultivation, it was observed that the in vitro germination of this species is not affected by the presence of AgNPs and that at low concentrations (0.385 mg L-1) it can promote an increase in seedlings biomass. However, higher concentration (15.4 mg L-1) leads to a reduction in seedling size and root system, but no changes were observed in the seedlings antioxidant metabolism and anatomy. These results demonstrate that the phytotoxicity of AgNPs in P. peruviana is related to the concentration of nanoparticles to which the specie is exposed.

Evaluation of hemagglutination activity of chitosan nanoparticles using human erythrocytes.

Chitosan is a polysaccharide composed of randomly distributed chains of ß-(1-4) D-glucosamine and N-acetyl-D-glucosamine. This compound is obtained by partial or total deacetylation of chitin in acidic solution. The chitosan-based hemostatic agents have been gaining much attention in the management of bleeding. The aim of this study was to evaluate in vitro hemagglutination activity of chitosan nanoparticles using human erythrocytes. The preparation of nanoparticles was achieved by ionotropic gelification technique followed by neutralization with NaOH 1 mol/L(-1). The hemagglutination activity was performed on a solution of 2% erythrocytes (pH 7.4 on PBS) collected from five healthy volunteers. The hemolysis determination was made by spectrophotometric analysis. Chitosan nanoparticle solutions without NaOH addition changed the reddish colour of the wells into brown, suggesting an oxidative reaction of hemoglobin and possible cell lysis. All neutralized solutions of chitosan nanoparticles presented positive haemagglutination, without any change in reaction color. Chitosan nanoparticles presented hemolytic activity ranging from 186.20 to 223.12%, while neutralized solutions ranged from 2.56 to 72.54%, comparing to distilled water. Results highlight the need for development of new routes of synthesis of chitosan nanoparticles within human physiologic pH.