Characterization and mode of action of an exopolygalacturonase from the hyperthermophilic bacterium Thermotoga maritima.

An intracellular pectinolytic enzyme, PelB (TM0437), from the hyperthermophilic bacterium Thermotoga maritima was functionally produced in Escherichia coli and purified to homogeneity. PelB belongs to family 28 of the glycoside hydrolases, consisting of pectin-hydrolysing enzymes. As one of the few bacterial exopolygalacturonases, it is able to remove monogalacturonate units from the nonreducing end of polygalacturonate. Detailed characterization of the enzyme showed that PelB is highly thermo-active and thermostable, with a melting temperature of 105 degrees C and a temperature optimum of 80 degrees C, the highest described to date for hydrolytic pectinases. PelB showed increasing activity on oligosaccharides with an increasing degree of polymerization. The highest activity was found on the pentamer (1000 U.mg(-1)). In addition, the affinity increased in conjunction with the length of the oligoGalpA chain. PelB displayed specificity for saturated oligoGalpA and was unable to degrade unsaturated or methyl-esterified oligoGalpA. Analogous to the exopolygalacturonase from Aspergillus tubingensis, it showed low activity with xylogalacturonan. Calculations on the subsite affinity revealed the presence of four subsites and a high affinity for GalpA at subsite +1, which is typical of exo-active enzymes. The physiological role of PelB and the previously characterized exopectate lyase PelA is discussed.

A xylogalacturonan epitope is specifically associated with plant cell detachment.

A monoclonal antibody (LM8) was generated with specificity for xyloglacturonan (XGA) isolated from pea (Pisum sativum L.) testae. Characterization of the LM8 epitope indicates that it is a region of XGA that is highly substituted with xylose. Immunocytochemical analysis indicates that this epitope is restricted to loosely attached inner parenchyma cells at the inner face of the pea testa and does not occur in other cells of the testa. Elsewhere in the pea seedling, the LM8 epitope was found only in association with root cap cell development at the root apex. Furthermore, the LM8 epitope is specifically associated with root cap cells in a range of angiosperm species. In embryogenic carrot suspension cell cultures the epitope is abundant at the surface of cell walls of loosely attached cells in both induced and non-induced cultures. The LM8 epitope is the first cell wall epitope to be identified that is specifically associated with a plant cell separation process that results in complete cell detachment.

Partially esterified oligogalacturonides are the preferred substrates for pectin methylesterase of Aspergillus niger.

Investigations on the mode of action of Aspergillus niger pectin methylesterase (PME) towards differently C(6)- and C(1)-substituted oligogalacturonides (oligoGal p A) are described. De-esterification of methyl-esterified (un)saturated oligoGal p A proceeds via a specific pattern, depending on the degree of polymerization. Initially, a first methyl ester of the oligomer is hydrolysed, resulting in one free carboxyl group. Subsequently, this first product is preferred as a substrate and is de-esterified for a second time. This product is then accumulated and hereafter de-esterified further to the final product, i.e. oligoGal p A containing one methyl ester located at the non-reducing end residue for both saturated and unsaturated oligoGal p A, as found by post-source decay matrix-assisted laser-desorption/ionization-time-of-flight MS. The saturated hexamer is an exception to this: three methyl esters are removed very rapidly, instead of two methyl esters. When unsaturated oligoGal p A were used, the formation of the end product differed slightly, suggesting that the unsaturated bond at the non-reducing end influences the de-esterification process. In vivo, PME prefers methyl esters, but the enzyme appeared to be tolerant for other C(6)- and C(1)-substituents. Changing the type of ester (ethyl esterification) or addition of a methyl glycoside (C(1)) only reduced the activity or had no effect respectively. The specific product pattern was identical for all methyl- and ethyl-esterified oligoGal p A and methyl-glycosidated oligoGal p A, which strongly indicates that one or perhaps two non-esterified oligoGal p A are preferred in the active-site cleft.

Molecular and biochemical characterization of the thermoactive family 1 pectate lyase from the hyperthermophilic bacterium Thermotoga maritima.

The ability of the hyperthermophilic bacterium Thermotoga maritima to grow on pectin as a sole carbon source coincides with the secretion of a pectate lyase A (PelA) in the extracellular medium. The pel A gene of T. maritima was functionally expressed in Escherichia coli as the first heterologously produced thermophilic pectinase, and purified to homogeneity. Gel filtration indicated that the native form of PelA is tetrameric. Highest activity (422 units/mg, with a K(m) of 0.06 mM) was demonstrated on polygalacturonic acid (PGA), whereas pectins with an increasing degree of methylation were degraded at a decreasing rate. In the tradition of pectate lyases, PelA demonstrated full dependency on Ca(2+) for stability and activity. The enzyme is highly thermoactive and thermostable, operating optimally at 90 degrees C and pH 9.0, with a half-life for thermal inactivation of almost 2 h at 95 degrees C, and an apparent melting temperature of 102.5 degrees C. Detailed characterization of the product formation with PGA indicated that PelA has a unique eliminative exo-cleavage pattern liberating unsaturated trigalacturonate as the major product, in contrast with unsaturated digalacturonate for other exopectate lyases known. The unique exo-acting mode of action was supported by progression profiles of PelA on oligogalacturonides (degree of polymerization, 3-8) and the examination of the bond cleavage frequencies.

Altered cell wall disassembly during ripening of Cnr tomato fruit: implications for cell adhesion and fruit softening.

The Cnr ( C olourless n on- r ipening) tomato ( Lycopersicon esculentum Mill.) mutant has an aberrant fruit-ripening phenotype in which fruit do not soften and have reduced cell adhesion between pericarp cells. Cell walls from Cnr fruit were analysed in order to assess the possible contribution of pectic polysaccharides to the non-softening and altered cell adhesion phenotype. Cell wall material (CWM) and solubilised fractions of mature green and red ripe fruit were analysed by chemical, enzymatic and immunochemical techniques. No major differences in CWM sugar composition were detected although differences were found in the solubility and composition of the pectic polysaccharides extracted from the CWM at both stages of development. In comparison with the wild type, the ripening-associated solubilisation of homogalacturonan-rich pectic polysaccharides was reduced in Cnr. The proportion of carbohydrate that was chelator-soluble was 50% less in Cnr cell walls at both the mature green and red ripe stages. Chelator-soluble material from ripe-stage Cnr was more susceptible to endo-polygalacturonase degradation than the corresponding material from wild-type fruit. In addition, cell walls from Cnr fruit contained larger amounts of galactosyl- and arabinosyl-containing polysaccharides that were tightly bound in the cell wall and could only be extracted with 4 M KOH, or remained in the insoluble residue. The complexity of the cell wall alterations that occur during fruit ripening and the significance of different extractable polymer pools from cell walls are discussed in relation to the Cnr phenotype.

Mode of action of pectin lyase A of Aspergillus niger on differently C(6)-substituted oligogalacturonides.

A thorough investigation of the mode of action of Aspergillus niger (4M-147) pectin lyase A (PLA) on differently C(6)-substituted oligogalacturonides is described. PLA appeared to be very specific for fully methyl-esterified oligogalacturonides: removal of the methyl-ester or changing the type of ester (ethyl esterification) or transamidation resulted in (almost) complete loss of conversion. The PLA activity increased with increasing length of the substrate up to a degree of polymerization (DP) of 8 indicating the presence of at least eight subsites on the enzyme. Product analysis demonstrated the formation of several Delta 4,5 unsaturated products and their saturated counterparts. The Delta 4,5 unsaturated trimer was the main product up to DP 8. For DP 9 and 10 Delta 4,5 unsaturated tetramer was the major product. Based upon the bond cleavage frequencies, a provisional subsite map was calculated, which supports the presence of eight subsites. By limited alkaline de-esterification of fully methyl-esterified pentamer and hexamer two sets of partially methyl-esterified pentamers (x and y methyl groups) and hexamers (a and b methyl groups) were prepared. Matrix-assisted laser desorption/ionization time of flight mass spectroscopy (MALDI-TOF MS) analysis demonstrated that the methyl-ester distribution was fully random. Using these partially methyl-esterified oligogalacturonides as substrates for PLA a 10-fold decrease in reaction rate was recorded compared with the fully methyl-esterified counterparts. Analysis of the methyl-ester distribution of the products showed that PLA tolerates carboxyl groups in the substrate binding cleft. At either subsite +2, +4, or -1 to -4 a free carboxyl group could be tolerated, whereas methyl-esters were obligatory at subsite +1 and +3. So PLA is capable to cleave the bond between a methyl-esterified and a non-esterified galacturonic acid residue, where the newly formed Delta 4,5 unsaturated non-reducing end residue always contains a methyl-ester.