Advances in the Catalytic Conversion of Ethanol into Nonoxygenated Added-Value Chemicals.

Given that ethanol can be obtained from abundant biomass resources (e.g., crops, sugarcane, cellulose, and algae), waste, and CO2, its conversion into value-added chemicals holds promise for the sustainable production of high-demand chemical commodities. Nonoxygenated chemicals, including light olefins, 1,3-butadiene, aromatics, and gasoline, are some of the most important of these commodities, substantially contributing to modern lifestyles. Despite the industrial implementation of some ethanol-to-hydrocarbons processes, several fundamental questions and technological challenges remain unaddressed. In addition, the utilization of ethanol as an intermediate provides new opportunities for the direct valorization of CO and CO2. Herein, the recent advances in the design of ethanol conversion catalysts are summarized, providing mechanistic insights into the corresponding reactions and catalyst deactivation, and discussing the related future research directions, including the exploitation of active site proximity to achieve better synergistic effects for reactions involving ethanol.

Exposure to Volatile Organic Compounds May Contribute to Atopic Dermatitis in Adults.

BACKGROUND: Volatile organic compounds (VOC) are major indoor air pollutants. Previous studies reported an association between VOC exposure and allergic diseases. Here, we aimed to explore the relationship between VOC exposure and atopic dermatitis (AD) in adults. METHODS: We prospectively enrolled 31 adult AD patients and 11 healthy subjects as controls. Urine metabolite levels of VOCs, including 1.3-butadiene, acrylamide, benzene, toluene, and xylene, were all determined with liquid chromatography-mass spectrometry. The relationship between AD and log-transformed urine levels of VOC metabolites were examined using a multivariate linear regression model adjusted for age and sex. We also treated mouse bone marrow-derived cells (BMMCs) with 1,3-butadiene and toluene and measured the release of ß-hexosaminidase. RESULTS: Our results demonstrated that creatinine-corrected urine levels of N-Acetyl-S- (3,4-dihydroxybutyl)-L-cysteine (DHBMA), N-Acetyl-S-(2-carbamoyl-2-hydroxyethyl)-L-cysteine (GAMA), and N-Acetyl-S-(benzyl)-L-cysteine (BMA) were all elevated in AD patients compared with controls. In a multivariate linear regression model, creatinine-corrected urine levels of BMA (a toluene metabolite) and DHBMA (a 1,3-butadiene metabolite) appeared elevated in AD patients, although statistical significance was not reached after correction for multiple comparisons. In addition, 1,3-butadiene and toluene could stimulate BMMCs to degranulate as much as compound 48/80. CONCLUSIONS: Some VOCs, such as 1,3-butadiene and toluene, might be associated with AD pathogenesis in adults.

MOF-Derived ZrO2-Supported Bimetallic Pd-Ni Catalyst for Selective Hydrogenation of 1,3-Butadiene.

A series of MOF-derived ZrO2-supported Pd-Ni bimetallic catalysts (PdNi/UiO-67-CTAB(n)-A500) were prepared by co-impregnation and pyrolysis at 500 °C under air atmosphere using UiO-67-CTAB(n) (CTAB: cetyltrimethylammonium bromide; n: the concentration of CTAB; n = 0, 3, 8, 13, 18) as a sacrificial template. The catalytic activity of PdNi/UiO-66-CTAB(n)-A500 in 1,3-butadiene hydrogenation was found to be dependent on the crystal morphology of the UiO-67 template. The highest activity was observed over the PdNi/UiO-67-CTAB(3)-A500 catalyst which was synthesized using UiO-67-CTAB(3) with uniform octahedral morphology as the template for the 1,3-butadiene selective hydrogenation. The 1,3-butadiene conversion and total butene selectivity were 98.4% and 44.8% at 40 °C within 1 h for the PdNi/UiO-67-CTAB(3)-A500 catalyst, respectively. The catalyst of PdNi/UiO-67-CTAB(3)-A500 can be regenerated in flowing N2 at 200 °C. Carbon deposited on the surface of the catalyst was the main reason for its deactivation. This work is valuable for the high-efficiency bimetallic catalyst's development on the selective hydrogenation of 1,3-butadiene.

Industry-wide review of potential worker exposure to 1,3-butadiene during chemical manufacturing and processing as a reactant.

Among the first 20 high-priority chemical substances selected by USEPA to undergo risk evaluation as part of the Toxic Substances Control Act, as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act of 2016 is 1,3-butadiene (1,3-BD). Because much of the literature related to occupational exposure to 1,3-BD is associated with the use of the substance in synthetic rubber production and few data have been published for exposures to 1,3-BD manufacturing workers, existing industrial hygiene data collected at facilities where the substance is manufactured or processed as a reactant were compiled and analyzed. The dataset was comprised of personal air samples collected between 2010 and 2019 at facilities located throughout the United States and was compiled into a single database using a uniform data collection template. Data designated by the companies as full-shift were stratified by job group and one of three operational conditions of the workplace: routine, turnaround, and non-routine. Data designated by the companies as short-term and task-level were stratified by task description, sample duration, and operational condition. The final aggregated database contained a total of 5,676 full-shift personal samples. Mean concentrations of 1,3-BD for the job groups ranged from 0.012 ppm to 0.16 ppm. High-end estimates of 1,3-BD air concentrations for the job groups under routine operations ranged from 0.014 ppm to 0.23 ppm. The aggregated database also included 1,063 short-term and task-level personal samples. For short-term samples (< =15 min), mean concentrations ranged from 0.49 ppm to 3.9 ppm, with the highest concentrations observed for the cleaning and maintaining equipment tasks. For task samples with durations greater than 15 min, mean concentrations ranged from 0.49 to 3.6 ppm, with the highest concentrations observed for the unloading and loading task. In addition to the personal air sampling records, information on the use of PPE during various tasks was compiled and analyzed. This data set provides robust quantitative air concentration data and exposure control information for which occupational exposures to 1,3-BD in the Manufacturing and Processing as a Reactant condition of use can be assessed.

Analysis of Oleogel Volatile Profile Formation under Ultrasonic Treatment.

Under certain conditions, ultrasonic treatment of certain foods and ingredients can contribute to the appearance of an extraneous odor, which is not usual for them, especially in fat-containing products. Since the food sector uses high-intensity ultrasound to control the crystallization of fats, the development of foreign smells and secondary fat oxidation products may impact the quality and safety of such items. In this work, we studied the volatile compounds' profiles of oleogels structured with individual fractions of beeswax using ultrasonic treatment. For this work, six samples of oleogels were obtained. Sunflower oil was used as a fatty base, and three fractions of beeswax were used as gelators: hydrocarbon fraction (>99%), monoester fraction (>95%), and a mixture fraction of wax di- and triesters (10.1%), free fatty acids (40.1%), and free fatty alcohols (49.8%). The influence of ultrasonic treatment on the properties of oleogels was assessed using light microscopy in polarized light, texture analysis, gas chromatography with flame ionization, and mass spectrometric detection. Ultrasonic treatment affected the crystallization of oleogels and led to the formation of smaller crystals. At the same time, sonication led to both an increase and a decrease in the firmness of oleogels, depending on the composition of the gelator. As regards volatile compounds, a total of 121 fragrant substances were identified in all samples, including such groups as alkanes, alkenes, alkadienes, alkynes, alkadiynes, alcohols, ketones, aldehydes, terpenes, alkyl alkane, and alkyl benzene derivatives. Ultrasonic treatment caused formation of new volatile unsaturated compounds. Some of them are known to have an unpleasant odor and thus might be responsible for the extraneous odor formation in studied fatty systems. Those were mainly (E)-2-octene, 1-heptene, 1,3-butadiene, and 1,3-octadiene in all oleogel samples. Sonicated samples B and C additionally had but-1-en-3-yne, pentenyne, and 1,3-butadiyne, whose odor can also be characterized as extraneous and distasteful. Several volatile compounds, supposed to be products of lipid oxidation, were also identified. Here we assume a reasonable approach is needed when selecting sonication conditions to prevent undesirable taste and flavor in oleogels and oleogel-based food products.

H2 -free Semi-hydrogenation of Butadiene by the Atomic Sieving Effect of Pd Membrane with Tree-like Pd Dendrites Array.

H2 -free semi-hydrogenation at room temperature shows great advantage for replacing the thermocatalytic process in industry owing to the high energy and resource saving, however, remains great challenges. Herein, a tree-like Pd dendrites array decorated Pd membrane was constructed as the core device in an electrochemistry assisted gas-fed membrane reactor for butadiene semi-hydrogenation. It reveals that hydrogen atomic sieving effect of this Pd-based membrane under electrochemical condition was the key for semi-hydrogenation. The configuration study of Pd nanostructured membrane demonstrates that the penetration of hydrogen atoms through Pd membrane from electrochemical side to chemical side is affected by the consumption of hydrogen atom in semi-hydrogenation step. Such atomic sieving property of nanostructured Pd membrane with 5.1 times increase in catalytic active surface area brings above 14 times higher in butadiene conversion than that of bare Pd foil, with ≈90 % of butenes selectivity at butadiene conversion ≈98 % over 300 h of H2 -free reaction under 15 mA cm-2 .

Novel Route to Cationic Palladium(II)-Cyclopentadienyl Complexes Containing Phosphine Ligands and Their Catalytic Activities.

The Pd(II) complexes [Pd(Cp)(L)n]m[BF4]m were synthesized via the reaction of cationic acetylacetonate complexes with cyclopentadiene in the presence of BF3∙OEt2 (n = 2, m = 1: L = PPh3 (1), P(p-Tol)3, tris(ortho-methoxyphenyl)phosphine (TOMPP), tri-2-furylphosphine, tri-2-thienylphosphine; n = 1, m = 1: L = dppf, dppp (2), dppb (3), 1,5-bis(diphenylphosphino)pentane; n = 1, m = 2 or 3: 1,6-bis(diphenylphosphino)hexane). Complexes 1-3 were characterized using X-ray diffractometry. The inspection of the crystal structures of the complexes enabled the recognition of (Cp-)⋯(Ph-group) and (Cp-)⋯(CH2-group) interactions, which are of C-H…π nature. The presence of these interactions was confirmed theoretically via DFT calculations using QTAIM analysis. The intermolecular interactions in the X-ray structures are non-covalent in origin with an estimated energy of 0.3-1.6 kcal/mol. The cationic palladium catalyst precursors with monophosphines were found to be active catalysts for the telomerization of 1,3-butadiene with methanol (TON up to 2.4∙104 mol 1,3-butadiene per mol Pd with chemoselectivity of 82%). Complex [Pd(Cp)(TOMPP)2]BF4 was found to be an efficient catalyst for the polymerization of phenylacetylene (PA) (catalyst activities up to 8.9 × 103 gPA·(molPd·h)-1 were observed).

DFT and ONIOM Simulation of 1,3-Butadiene Polymerization Catalyzed by Neodymium-Based Ziegler-Natta System.

Using modern methods of quantum chemistry, a theoretical substantiation of the high cis-stereospecificity of 1,3-butadiene polymerization catalyzed by the neodymium-based Ziegler-Natta system was carried out. For DFT and ONIOM simulation, the most cis-stereospecific active site of the catalytic system was used. By analyzing the total energy, as well as the enthalpy and Gibbs free energy of the simulated catalytically active centers, it was found that the coordination of 1,3-butadiene in the trans-form was more favorable than in the cis-form by 11 kJ/mol. However, as a result of π-allylic insertion mechanism modeling, it was found that the activation energy of cis-1,3-butadiene insertion into the π-allylic neodymium-carbon bond of the terminal group on the reactive growing chain was 10-15 kJ/mol lower than the activation energy of trans-1,3-butadiene insertion. The activation energies did not change when both trans-1,4-butadiene and cis-1,4-butadiene were used for modeling. That is, 1,4-cis-regulation was due not to the primary coordination of 1,3-butadiene in its cis-configuration, but to its lower energy of attachment to the active site. The obtained results allowed us to clarify the mechanism of the high cis-stereospecificity of 1,3-butadiene polymerization by the neodymium-based Ziegler-Natta system.

Investigating the Properties of Double Triangle Terthiophene Configured Dumbbell-Like Photochromic Dye with Ethyne and 1,3-Butadiene Bridge.

Dumbbell-like photochromic dyes were constructed by incorporation of double triangle terthiophene with ethyne or 1,3-butadiene bridge. Regular photochromic behavior was investigated with alternated UV (365 nm) and Visible light (˃ 400 nm) irradiation. However, the different bridge group leads to distinct difference in their photochromic wavelength. For the ethyne bridged triangle terthiophene (DT1), the photochromic wavelength was observed around 500-700 nm (peak value: 605 nm) and the solution turned to red with 365 nm light irradiation. However, the photochromic wavelength was blue shift to 418-550 nm and the solution was turned to light yellow for 1,3-butadiene bridged dye (DT2). Both of the colored solution can be bleached via visible light irradiation. Additionally, the two dyes in THF were emissive with absolute quantum yield (QY) of 0.36/0.40. Along with the photo-induced photocyclization process, the emissive solution can be effectively quenched at photo-stationary sate (Φ = 0.05/0.04). And emission "on-off" cycle could be established based on the UV/visible light irradiation cycle.

Preparation of Functionalized Zr-Based MOFs and MOFs/GO for Efficient Removal of 1,3-Butadiene from Cigarette Smoke.

Removal of 1,3-butadiene from cigarette smoke plays an important role in human health and environmental protection. Herein, a series of UiO-66 X% containing different ratios of the -NH2 group was synthesized via the solvothermal method by using terephthalic acid (H2BDC) and 2-aminoterephthalic acid (NH2-BDC) as ligands. Using GO as support, a series of UiO-66-NH2/GO Y% were prepared by controlling the ratio of UiO-66-NH2 and GO. The effects of -NH2 and GO contents on the structure and composition of MOFs were investigated. Finally, the different -NH2 contents of UiO-66 X% and the different GO contents of UiO-66-NH2/GO Y% were applied in 1,3-butadiene removal from cigarette smoke. The results showed that UiO-66 X% with the higher contents of -NH2 showed a higher rate of 1,3-butadiene removal, and UiO-66-NH2/GO Y% with the GO contents of 5% showed the highest removal rate of about 33.85%, which was 25.54% higher than that of activated carbon. In addition, the saturation capacity of the adsorbent materials for 1,3-butadiene was as high as 210.01-239.54 mg/g, showing great potential in reducing harmful components in cigarette smoke and environmental protection.

Associations of urinary 1,3-butadiene metabolite with glucose homeostasis, prediabetes, and diabetes in the US general population: Role of alkaline phosphatase.

The chemical - 1,3-butadiene (BD) is a volatile organic compound ubiquitous in the environment. However, the relationships and underlying mechanisms between BD exposure and glucose dyshomeostasis and diabetes in the general population remain unclear. We sought to explore the associations of BD exposure with glucose homeostasis, prediabetes, and diabetes, as well as the role of serum alkaline phosphatase (ALP) in these associations. This study included 5092 US general residents from the National Health and Nutrition Examination Survey with measurements of urinary BD metabolite (N-Acetyl-S-(3,4-dihydroxybutyl)-L-cysteine, DHBMA) and serum ALP. Glucose homeostasis was evaluated by fasting plasma glucose (FPG), fasting serum insulin (FINS), glycohemoglobin (HbA1c), and homeostasis model assessment of insulin resistance (HOMA-IR). HOMA-IR>2.6 was considered as insulin resistance (IR). Prediabetes and diabetes were determined according to the recommendations of the American Diabetes Association. The associations of DHBMA with glucose homeostasis, prediabetes, and diabetes were assessed by linear regression models and logistic regression models. The mediating role of ALP was evaluated by mediation analysis. We observed positive dose-response relationships of DHBMA level with glucose homeostasis indices and ALP levels, as well as with the risks of prediabetes and diabetes (all P < 0.05 and/or P for trend <0.05). Each 2-fold increase in DHBMA was associated with a 1.32%, 9.20%, 0.72%, and 10.64% increase in FPG, FINS, HbA1c, and HOMA-IR, respectively (all P < 0.05). And the corresponding odds ratios (ORs) and 95% confidence intervals (CIs) for IR, prediabetes, and diabetes were 1.36 (1.14, 1.61), 1.51 (1.26, 1.83), and 1.20 (0.90, 1.61), respectively. Furthermore, increased ALP significantly mediated 15.29%-41.12% of the associations of DHBMA with glucose dyshomeostasis and increased risks of prediabetes and diabetes. Our findings indicated that BD exposure was associated with glucose dyshomeostasis and increased risks of prediabetes and diabetes. The upregulation of ALP might play a significant role in these associations.

Biohydrogenation of 1,3-Butadiene to 1-Butene under Acetogenic Conditions by Acetobacterium wieringae.

The environmental fate and transformation mechanism(s) of 1,3-butadiene (BD) under anoxic conditions remain largely unexplored. Anaerobic consortia that can biohydrogenate BD to stoichiometric amounts of 1-butene at a maximum rate of 205.7 ± 38.6 µM day-1 were derived from freshwater river sediment. The formation of 1-butene occurred only in the presence of both H2 and CO2 with concomitant acetate production, suggesting the dependence of BD biohydrogenation on acetogenesis. The 16S rRNA gene-targeted amplicon sequencing revealed the enrichment and dominance of a novel Acetobacterium wieringae population, designated as strain N, in the BD-biohydrogenating community. Multiple genes encoding putative ene-reductases, candidate catalysts for the hydrogenation of the C═C bond in diene compounds, were annotated on the metagenome-assembled genome of strain N, and thus attributed the BD biohydrogenation activity to strain N. Our findings emphasize an essential but overlooked role of certain Acetobacterium members (e.g., strain N) contributing to the natural attenuation of BD in contaminated subsurface environments (e.g., sediment and groundwater). Future efforts to identify and characterize the ene-reductase(s) responsible for BD biohydrogenation in strain N hold promise for the development of industrial biocatalysts capable of stereoselective conversion of BD to 1-butene.

Use of biomarker data and metabolite relative potencies to support derivation of noncancer reference values based on the reproductive and developmental toxicity effects of 1,3-butadiene.

Subchronic and chronic reference values (RfVs) were derived for 1,3-butadiene (BD) based upon its ability to cause reproductive and developmental effects observed in laboratory mice and rats. Metabolism has been well-established as an important determinant of the toxicity of BD. A major challenge to human health risk assessment is presented by large quantitative species differences in the metabolism of BD, differences that should be accounted for when the rodent toxicity responses are extrapolated to humans. The methods of Fred et al. (2008)/Motwani and Törnqvist (2014) were extended and applied here to the noncancer risk assessment of using data-derived extrapolation factors to account for species differences in metabolism, as well as differences in cytotoxic potency of three BD metabolites. This approach made use of biomarker data (hemoglobin adducts) to quantify species differences in the internal doses of BD metabolites experienced in mice, rats and humans. Using these methods, the dose-response relationships in mice and rats exhibit improved concordance, and result in subchronic and chronic inhalation reference values of 29 and 10 ppm, respectively, for BD. Confidence in these reference values is considered high, based on high confidence in the key studies, medium-to-high confidence in the toxicity database, high confidence in the estimates of internal dose, and high confidence in the dose-response modeling.

Replacing the greater evil: Can legalizing decentralized waste burning in improved devices reduce waste burning emissions for improved air quality?

Open waste burning emissions constitute a significant source of air pollution affecting human health in India. In regions where cleaner fuels have displaced solid biofuel usage, open waste burning is rapidly becoming one of the largest sources of airborne human class-I-carcinogens and particulate matter. As the establishment of waste management infrastructure in rural India is likely to take years, we explore whether health-relevant emissions can be reduced by legalizing the burning of dry non-biodegradable waste in improved devices. We measure the emission factors of 76 VOCs, CH4, CO, and CO2 from different types of waste burned in two different improved devices, a burn basket and a local water heater. Based on our experiments, we create four "what-if" intervention scenarios to assess the improvement of air quality due to the emission reductions that can be accomplished by four management strategies. We find that substituting the traditional, more polluting water heating fuels with dry plastic waste across rural India can reduce primary emissions (e.g., -29 Ggy-1 for benzene) and ozone formation potential (-2960 Ggy-1) from open waste burning. When dry waste is used in lieu of more polluting fuels, and its burning serves a purpose, the net class-I-carcinogen benzene emissions, would be halved compared to the present. The change in emissions for the class-I carcinogen 1,3-butadiene would become net negative. This happens because the emissions avoided when part of the solid biofuel currently used in rural India is replaced by plastic waste (4.1 (1.2-4.1) Ggy-1) exceed the waste burning emissions of this compound (3 (1.2-3.7) Ggy-1) by so much, that residential sector emission reductions offset all waste burning emissions including those of landfill fires. Our study demonstrates that India's air quality can be improved by permitting and promoting the use of dry packaging waste in lieu of traditional biofuels and by promoting improved burning devices.

An updated lymphohematopoietic and bladder cancers risk evaluation for occupational and environmental exposures to 1,3-butadiene.

EPA designated 1,3-butadiene (BD) as a high priority chemical in December 2019 and is presently performing an evaluation under the Toxic Substances Control Act (TSCA). EPA's cancer dose-response assessment for BD was published in 2002 and was primarily based on a study on workers exposed to BD in the North American synthetic Styrene-Butadiene Rubber (SBR) Industry developed by the University of Alabama at Birmingham (UAB). EPA relied upon a Poisson regression of leukemia mortality data from this cohort (hereinafter referred to as the SBR study) to estimate the cancer potency of BD. At the time, the SBR cohort included more than 15,000 male workers that were followed up through 1991. The SBR cohort has undergone multiple updates over the past two decades. Most recently, Sathiakumar et al. (2021a, b) published an update, with 18 more years of follow up in addition to approximately 5,000 female workers and updated exposure concentration estimates. Recent EPA assessments (e.g., for ethylene oxide, USEPA 2016) based on epidemiological studies use Cox proportional hazards models because they offer better control of the effect of age in cancer development and are less restrictive than Poisson regression models. Here, we develop exposure-response models using standard Cox proportional hazards regression. We explore the relationship between six endpoints (all leukemia, lymphoid leukemia, myeloid leukemia, multiple myeloma, non-Hodgkin's lymphoma, and bladder cancer) and exposures to BD using the most recent exposure metrics and the most recent update of the SBR study. After adjusting for statistically significant covariates, an upper 95% confidence level on the cancer potency based on leukemia derived herein is 0.000086 per ppm, which is approximately 1,000-fold less than EPA's (2002) estimate of 0.08 per ppm and about 10-fold less than TCEQ's (2008) estimate of 0.0011 per ppm.

Light-Assisted Semi-Hydrogenation of 1,3-Butadiene with Water.

Sustainable processes for semi-hydrogenation of alkynes/alkadienes impurities in alkenes feedstocks are in great demand in industry as the utilization of excessive hydrogen, high temperature and unsatisfactory alkenes selectivity of the current thermo-catalytic route, however, their development is still challenging. Herein, we innovate a light-assisted semi-hydrogenation process in gas-feed fixed bed reactor, with water as hydrogen atom source by in situ photocatalysis. Using Pd/TiO2 as model catalyst, this process shows an excellent catalytic performance for the semi-hydrogenation of 1,3-butadiene, with 100 % of butenes selectivity at ≈99 % of conversion over 180 h of reaction at ambient temperature driven by 66 mW cm-2 of irradiation intensity. This light-driven, H2 -free, ambient temperature semi-hydrogenation process, with superior performance to that of thermocatalytic route, shows attractive to bring an evolution in industrial hydrogenation technology to an economical and safe way.

Demonstration of VOC Fenceline Sensors and Canister Grab Sampling near Chemical Facilities in Louisville, Kentucky.

Experimental fenceline sensor pods (SPods) fitted with 30 s duration canister grab sampling (CGS) systems were deployed at a site near chemical facilities in Louisville, KY, from 4 June 2018 to 5 January 2020. The objective of the study was to better understand lower cost 10.6 eV photoionization detector (PID)-based volatile organic compound (VOC) sensors and investigate their utility for near-source emissions detection applications. Prototype SPods containing PID sensor elements from two different manufacturers yielded between 78% and 86% valid data over the study, producing a dataset of over 120,000 collocated pair fenceline measurements averaged into 5-min datapoints. Ten-second time-resolved SPod data from an elevated fenceline sensor signal day are presented, illustrating source emission detections from the direction of a facility 500 m west of the monitoring site. An SPod-triggered CGS acquired in the emission plume on this day contained elevated concentrations of 1,3-butadiene and cyclohexane (36 parts per billion by volume (ppbv) and 637 ppbv, respectively), compounds known to be emitted by this facility. Elevated concentrations of these compounds were observed in a subset of the 61 manual and triggered CGS grab samples acquired during the study, with winds from the west. Using novel wind-resolved visualization and normalization approaches described herein, the collocated pair SPod datasets exhibited similarity in emission source signature. With winds from the west, approximately 50% of SPod readings were above our defined theoretical detection limit indicating persistent measurable VOC signal at this site. Overall, this 19-month study demonstrated reasonable prototype SPod operational performance indicating that improved commercial forms of lower cost PID sensors could be useful for select VOC fenceline monitoring applications.

Comparative Study of Pd-Ni Bimetallic Catalysts Supported on UiO-66 and UiO-66-NH2 in Selective 1,3-Butadiene Hydrogenation.

Selective hydrogenation of 1,3-butadiene (BD) is regarded as the most promising route for removing BD from butene streams. Bimetallic Pd-Ni catalysts with changed Pd/Ni molar ratios and monometallic Pd catalysts were synthesized using two differently structured metal-organic framework supports: UiO-66 and UiO-66-NH2. The effects of the structure of support and the molar ratio of Pd/Ni on the catalytic property of selective BD hydrogenation were studied. The Pd-Ni bimetallic supported catalysts, PdNi/UiO-66 (1:1) and PdNi/UiO-66-NH2 (1:1), exhibited fine catalytic property at low temperature. Compared with UiO-66, UiO-66-NH2 with a certain number of alkaline sites could reduce the catalytic activity for the BD hydrogenation reaction. However, the alkaline environment of UiO-66-NH2 is helpful to improve the butene selectivity. PdNi/UiO-66-NH2 (1:1) catalyst presented better stability than PdNi/UiO-66 (1:1) under the reaction conditions, caused by the strong interaction between the -NH2 groups of UiO-66-NH2 and PdNi NPs. Moreover, the PdNi/UiO-66-NH2 (1:1) catalyst presented good reproducibility in the hydrogenation of BD. These findings afford a beneficial guidance for the design and preparation of efficient catalysts for selective BD hydrogenation.

Carcinogenic and health risk assessment of respiratory exposure to acrylonitrile, 1,3-butadiene and styrene in the petrochemical industry using the US Environmental Protection Agency method.

Objectives. This study aimed to assess carcinogenic and health risks of respiratory exposure to acrylonitrile, 1,3-butadiene and styrene (ABS) in the petrochemical industry. Methods. This cross-sectional study was conducted in a petrochemical plant producing ABS copolymers. Respiratory exposure to each of acrylonitrile, 1,3-butadiene and styrene was measured using methods No. 1604, No. 1024 and No. 1501 of the National Institute of Occupational Safety and Health (NIOSH), respectively. The US Environmental Protection Agency (USEPA) method was used to assess carcinogenic and health risks. Results. The average occupational exposure to ABS was 560.82 µg m-3 for 1,3-butadiene, 122.8 µg m-3 for acrylonitrile and 1.92 µg m-3 for styrene. The average lifetime cancer risk in the present study was 2.71 × 10-3 for 1,3-butadiene, 2.1 × 10-3 for acrylonitrile and 6.6 × 10-3 for styrene. Also, the mean non-cancer risk (hazard quotient) among all participants for each of 1,3-butadiene, acrylonitrile and styrene was 4.04 ± 6.93, 10.82 ± 14.76 and 0.19 ± 0.11, respectively. Conclusion. The values of carcinogenic and health risks in the majority of the subjects were within the unacceptable risk levels due to exposure to ABS vapors. Hence, corrective actions are required to protect the workers from non-cancer and cancer risks.

PBPK Modeling to Simulate the Fate of Compounds in Living Organisms.

Pharmacokinetics study the fate of xenobiotics in a living organism. Physiologically based pharmacokinetic (PBPK) models provide realistic descriptions of xenobiotics' absorption, distribution, metabolism, and excretion processes. They model the body as a set of homogeneous compartments representing organs, and their parameters refer to anatomical, physiological, biochemical, and physicochemical entities. They offer a quantitative mechanistic framework to understand and simulate the time-course of the concentration of a substance in various organs and body fluids. These models are well suited for performing extrapolations inherent to toxicology and pharmacology (e.g., between species or doses) and for integrating data obtained from various sources (e.g., in vitro or in vivo experiments, structure-activity models). In this chapter, we describe the practical development and basic use of a PBPK model from model building to model simulations, through implementation with an easily accessible free software.