A High-Resolution 3D Ultrasound Imaging System Oriented towards a Specific Application in Breast Cancer Detection Based on a 1 × 256 Ring Array.

This paper presents the design and development of a high-resolution 3D ultrasound imaging system based on a 1 × 256 piezoelectric ring array, achieving an accuracy of 0.1 mm in both ascending and descending modes. The system achieves an imaging spatial resolution of approximately 0.78 mm. A 256 × 32 cylindrical sensor array and a digital phantom of breast tissue were constructed using the k-Wave toolbox. The signal is acquired layer by layer using 3D acoustic time-domain simulation, resulting in the collection of data from each of the 32 layers. The 1 × 256 ring array moves on a vertical trajectory from the chest wall to the nipple at a constant speed. A data set was collected at intervals of 1.5 mm, resulting in a total of 32 data sets. Surface rendering and volume rendering algorithms were used to reconstruct 3D ultrasound images from the volume data obtained via simulation so that the smallest simulated reconstructed lesion had a diameter of 0.3 mm. The reconstructed three-dimensional image derived from the experimental data exhibits the contour of the breast model along with its internal mass. Reconstructable dimensions can be achieved up to approximately 0.78 mm. The feasibility of applying the system to 3D breast ultrasound imaging has been demonstrated, demonstrating its attributes of resolution, precision, and exceptional efficiency.

[Establishment of a 3D ultrasound imaging system based on pulse-triggered image acquisition].

OBJECTIVE: To establish a 3D ultrasound imaging system based on pulse-triggered image acquisition using the linear probe on the VerasonicsTM vantage 128 platform and evaluate its performance in scanning standard phantom and human carotid artery. OBJECTIVE: The 3D ultrasound imaging system included 3 modules for probe motion control, image acquisition and storage, and 3D image reconstruction and display. To improve the precision of image acquisition, we used fixed frequency pulses to control the external trigger function combined with mechanical scanning. Voxel-based 3D reconstruction was used for image reconstruction and display. The user interface was designed to allow direct operations of the platform. We carried out scanning tests of standard ultrasound phantom and human carotid artery to evaluate the performance of this imaging system. OBJECTIVE: We successfully constructed a 3D ultrasound imaging system based on pulse-triggered image acquisition. The results of standard phantom and human carotid scanning tests showed that each module of the system was fully functional. The self-designed user interface of this ultrasound imaging system allowed full control of the system functions for original image acquisition, 3D image reconstruction, and display of cross-sections in 3 different views. OBJECTIVE: This 3D ultrasound imaging system achieves high-quality 3D ultrasound imaging and provides the basis for further study and clinical application of 3D ultrasound imaging.

A 3-D ultrasound imaging robotic system to detect and quantify lower limb arterial stenoses: in vivo feasibility.

The degree of stenosis is the most common criterion used to assess the severity of lower limb peripheral arterial disease. Two-dimensional ultrasound (US) imaging is the first-line diagnostic method for investigating lesions, but it cannot render a 3-D map of the entire lower limb vascular tree required for therapy planning. We propose a prototype 3-D US imaging robotic system that can potentially reconstruct arteries from the iliac in the lower abdomen down to the popliteal behind the knee. A realistic multi-modal vascular phantom was first conceptualized to evaluate the system's performance. Geometric accuracies were assessed in surface reconstruction and cross-sectional area in comparison to computed tomography angiography (CTA). A mean surface map error of 0.55 mm was recorded for 3-D US vessel representations, and cross-sectional lumen areas were congruent with CTA geometry. In the phantom study, stenotic lesions were properly localized and severe stenoses up to 98.3% were evaluated with -3.6 to 11.8% errors. The feasibility of the in vivo system in reconstructing the normal femoral artery segment of a volunteer and detecting stenoses on a femoral segment of a patient was also investigated and compared with that of CTA. Together, these results encourage future developments to increase the robot's potential to adequately represent lower limb vessels and clinically evaluate stenotic lesions for therapy planning and recurrent non-invasive and non-ionizing follow-up examinations.