Ion adsorption-enrichment effect and its driving mechanism for nano-dots lithography with SPM probe on water-soluble crystal surfaces.

HYPOTHESIS: Water-soluble KDP (KH2PO4) crystals possess excellent optical properties and are employed as frequency converters in clean fusion energy. To improve their performances, there is an immediate necessity to lithograph surface nano-patterns on them. Although the Scanning Probe Microscope (SPM) provides a promising way to achieve this purpose through the water menisci, the driving mechanisms of the lithographic behaviors have not yet been revealed. SIMULATIONS AND EXPERIMENTS: Multi-scale investigations are constructed to explore the underlying driving mechanisms. The SPM probe-induced ion diffusion-transport behaviors are investigated by molecular dynamics. The ion adsorption-enrichment mechanisms are revealed by 18 adsorption models via the ab initio. The SPM probe-induced self-assembly experiments are performed to prove the local heavy concentration. A comprehensive model is developed to describe the lithography mechanisms of the probe-induced self-assembly nano-dots on water-soluble substrates. FINDINGS: It is interestingly found that the KDP growth units (H2PO4-) exhibit obvious adsorption-enrichment effect at 3.16 Å from the probe surface, causing local heavy concentration. The H2PO4- would spontaneously adsorb onto the probe surface, which is dominated by the Si-O bonding reactions. The nano-dots with the height of 27 âˆ¼ 48 nm and diameter of 2.0 âˆ¼ 2.7 µm are lithographed on the KDP substrate. The proposed model further confirms that the lithography processes are driven by the solution supersaturation, solute diffusion, and surface free energy.

Unexpected discovery: "A new 3,3'-bipyrazolo[3,4-b]pyridine scaffold and its comprehensive analysis".

In this study, a novel 3,3'-bipyrazolo [3,4-b]pyridine-type structure was synthesized from 5-acetylamino-3-methyl-1-phenylpyrazole using the Vilsmeier-Haack reaction as a key step. The spectroscopic properties and structural elucidation of the compound were determined with the use of FT-IR, HRMS, 1H NMR, and 13C NMR. Likewise, the theoretical analysis of the IR and NMR spectra allowed peaks to be assigned and a solid correlation was demonstrated between the experimental and theoretical results. Finally, ab initio calculations based on the density functional theory method at the B3LYP/6-311G (d,p) level of theory were used to determine the conformational energy barrier, facilitating the identification of the most probable conformers of the synthesized compound. Overall, our findings contribute to the understanding of bipyrazolo [3,4-b]pyridine derivatives.

Why the pyrochlore-like antiferromagnet NaCu3F7is magnetically non-frustrated.

We present a theoretical study of the magnetic properties for the pyrochlore-like NaCu3F7compound, which surprisingly experience little or no frustration. The magnetic effective exchange interactions were calculated usingab-initiomethods explicitly treating the electronic correlation. A model Hamiltonian (quantum Heisenberg Hamiltonian, and for comparison a spin 1/2 Ising Hamiltonian) was built from these interactions and used to determine the zero temperature magnetic order versus magnetic field. The magnetic order at zero magnetic field is non frustrated and associated with the propagation vectorq→=(0,0,0). The magnetization versus magnetic field reveals the existence of a 1/3 plateau that could be observed in high-pulsed magnetic field experiments. Analyzing the magnetic interactions, we highlight the importance of the magnetic ion nature, and the lattice distortion, in the non-frustrated nature of the NaCu3F7magnetic structure, despite its triangular/Kagome subnetworks. We believe that this non-frustrated behavior could also take place in other triangular copper-based systems.

Electronic Structure of Mg-, Si-, and Zn-Doped SnO2 Nanowires: Predictions from First Principles.

We investigated the electronic structure of Mg-, Si-, and Zn-doped four-faceted [001]- and [110]-oriented SnO2 nanowires using first-principles calculations based on the linear combination of atomic orbitals (LCAO) method. This approach, employing atomic-centered Gaussian-type functions as a basis set, was combined with hybrid density functional theory (DFT). Our results show qualitative agreement in predicting the formation of stable point defects due to atom substitutions on the surface of the SnO2 nanowire. Doping induces substantial atomic relaxation in the nanowires, changes in the covalency of the dopant-oxygen bond, and additional charge redistribution between the dopant and nanowire. Furthermore, our calculations reveal a narrowing of the band gap resulting from the emergence of midgap states induced by the incorporated defects. This study provides insights into the altered electronic properties caused by Mg, Si, and Zn doping, contributing to the further design of SnO2 nanowires for advanced electronic, optoelectronic, photovoltaic, and photocatalytic applications.

Pressure and temperature dependentab-initioquasi-harmonic thermoelastic properties of tungsten.

We present theab-initiotemperature and pressure dependent thermoelastic properties of body-centered cubic tungsten. The temperature dependent quasi-harmonic elastic constants (ECs) are computed at several reference volumes including both the phonon and the electronic excitations contribution to the free energy and interpolated at different temperatures and pressures. Good agreement with the experimental ECs on a single crystal at ambient pressure is found. The pressure and temperature dependence of the shear sound velocity measured on polycrystalline tungsten by Qiet alis also in agreement with theory. Some discrepancies are found instead for the compressional velocity at high temperature and this is attributed to the temperature derivative of the bulk modulus, higher in theory than in experiment. These conclusions are reached both by PBE and by PBEsol functionals. The two give elastic properties with a similar pressure and temperature dependence although the latter is closer to experiment at 0 K.

Electronic structure with spin-orbit coupling effect of HfH molecule for laser cooling investigations.

The electronic structure, including the spin-orbit coupling effect of the HfH molecule, has been studied to determine if it can be cooled through Doppler and Sysphus laser cooling techniques. The multi-reference configuration interaction plus Davidson correction (MRCI + Q) method has been used to calculate its potential energy curves (P.E.C.s) in the Ω(±) and 2s+1Ʌ(+/-) representation. The spectroscopic constants Te, Re, ωe, Be, αe, the dipole moment µe, and the dissociation energies De agree very well with previously published work. In addition, we present in this work twenty new doublet and quartet states in the Ω(±) representation. The electronic transition dipole moment curves (TDMCs) between the lowest-lying electronic states have been investigated for the Δ - Π, Π - ∑+ and Δ - Φ transitions among specific Ω(±) states. The Franck-Condon factors (FCFs), the Einstein coefficient of spontaneous emission [Formula: see text] , and the radiative lifetime τ have been computed for the investigated transitions. In addition, properties of the molecules' electronic and vibrational states, such as the static dipole moment curves (D.M.C.s), the ionic character fionic, and the rovibrational constants are calculated. We deduce from our results that the HfH molecule is indeed a laser-cooling candidate that can reach a temperature as low as the nK regime. We present a complementary scheme with suitable experimental parameters. These results can be of great interest to experimental spectroscopists interested in ultracold diatomic molecules and their applications.

Deep Earth Chronicles: High-Pressure Investigation of Phenakite Mineral Be2SiO4.

Beryllium silicate, recognized as the mineral phenakite (Be2SiO4), is a prevalent constituent in Earth's upper mantle. This study employs density-functional theory (DFT) calculations to explore the structural, mechanical, dynamical, thermodynamic, and electronic characteristics of this compound under both ambient and high-pressure conditions. Under ideal conditions, the DFT calculations align closely with experimental findings, confirming the mechanical and dynamical stability of the crystalline structure. Phenakite is characterized as an indirect band gap insulator, possessing an estimated band gap of 7.83 eV. Remarkably, oxygen states make a substantial contribution to both the upper limit of the valence band and the lower limit of the conduction band. We delved into the thermodynamic properties of the compound, including coefficients of thermal expansion, free energy, entropy, heat capacity, and the Gruneisen parameter across different temperatures. Our findings suggest that Be2SiO4 displays an isotropic behavior based on estimated anisotropic factors. Interestingly, our investigation revealed that, under pressure, the compression of phenakite is not significantly affected by bond angle bending.

Interaction of N2, O2 and H2 Molecules with Superalkalis.

Superalkalis (SAs) are exotic clusters having lower ionization energy than alkali atoms, which makes them strong reducing agents. In the quest for the reduction of diatomic molecules (X2) such as N2, O2, and H2 using Møller-Plesset perturbation theory (MP2), we have studied their interaction with typical superalkalis such as FLi2, OLi3, and NLi4 and calculated various parameters of the resulting SA-X2 complexes. We noticed that the SA-O2 complex and its isomers possess strong ionic interaction, which leads to the reduction of O2 to O2 - anion. On the contrary, there are both ionic and covalent interactions in SA-N2 complexes such that the lowest energy isomers are covalently bonded with no charge transfer from SA. Further, the interaction between SA and H2 leads to weakly bound complexes, which results in the adsorption of H2 molecules. The nature of interaction is found to be closely related to the electron affinity of diatomic molecules. These findings might be useful in the study of the activation, reduction, and adsorption of small molecules, which can be further explored for their possible applications.

Multicrystalline Informatics Applied to Multicrystalline Silicon for Unraveling the Microscopic Root Cause of Dislocation Generation.

A comprehensive analysis of optical and photoluminescence images obtained from practical multicrystalline silicon wafers is conducted, utilizing various machine learning models for dislocation cluster region extraction, grain segmentation, and crystal orientation prediction. As a result, a realistic 3D model that includes the generation point of dislocation clusters is built. Finite element stress analysis on the 3D model coupled with crystal growth simulation reveals inhomogeneous and complex stress distribution and that dislocation clusters are frequently formed along the slip plane with the highest shear stress among twelve equivalents, concentrated along bending grain boundaries (GBs). Multiscale analysis of the extracted GBs near the generation point of dislocation clusters combined with ab initio calculations has shown that the dislocation generation due to the concentration of shear stress is caused by the nanofacet formation associated with GB bending. This mechanism cannot be captured by the Haasen-Alexander-Sumino model. Thus, this research method reveals the existence of a dislocation generation mechanism unique to the multicrystalline structure. Multicrystalline informatics linking experimental, theoretical, computational, and data science on multicrystalline materials at multiple scales is expected to contribute to the advancement of materials science by unraveling complex phenomena in various multicrystalline materials.

Ab initio investigation of the competition of pnicogen, halogen, and hydrogen bonds resulting from the interactions between cyanophosphine and hypohalous acids.

CONTEXT: The complexes formed as a result of the interactions between cyanophosphine (CP, H2PCN) and hypohalous acid molecules (HOX, X = F, Cl, Br, and I) were studied by employing ab initio computations conducted at the MP2/aug-cc-pVTZ level. Three types of complexes were acquired (I, II, and III) as a result of the (O∙∙∙P) pnicogen bond, the (N∙∙∙H) hydrogen bond, and the (N∙∙∙X) halogen bond interaction, respectively. The results of harmonic vibrational frequency calculations with no imaginary frequencies confirmed the structures as minima. In addition, given the interaction energy of the complexes, hydrogen bond complexes of structure II have the highest stability compared to other structures. In all studied complexes, the strength of the interactions depended on the electronegativity of the halogen atoms. The characteristics and nature of the whole three types of complexes were examined and evaluated with natural bond orbital (NBO), atom in molecules (AIM), molecular electrostatic potential (MEP) maps, non-covalent interaction (NCI) index, and electron density difference (EDD) analyses. METHOD: The optimization of all complexes and corresponding monomers was conducted through the ab initio method, employing the MP2 level along with the aug/cc-pVTZ basis set for all atoms, except for the iodine (I) atom, for which the aug-cc-pVTZ (PP) basis set was employed. Subsequent frequency calculations were executed to ascertain the minimum energy state of the complexes at the MP2 level and the aug/cc-pVTZ basis set, utilizing Gaussian09 software. The MEP maps of the monomers were generated using the analysis-surface suite (WFA-SAS) software package. To probe the orbital interactions within the studied complexes, NBO analysis was performed employing NBO software. The assessment of bond nature, topological features, and electron density values at critical points for the studied complexes was undertaken using AIMAll software. The NCI index was derived utilizing Multiwfn software, and its three-dimensional representation was rendered using VMD software.

Effect of the Addition of Re on the Microstructure and Phase Composition of Haynes 282: Ab Initio Modelling and Experimental Investigation of Additively Manufactured Specimens.

Interactions in a multicomponent Ni-Cr-Mo-Al-Re model alloy were determined by ab initio calculations in order to investigate the Re doping effect on Haynes 282 alloys. Simulation results provided an understanding of short-range interactions in the alloy and successfully predicted the formation of a Cr and Re-rich phase. The Haynes 282 + 3 wt% Re alloy was manufactured using the additive manufacturing direct metal laser sintering (DMLS) technique, in which the presence of the (Cr17Re6)C6 carbide was confirmed by an XRD study. The results provide useful information about the interactions between Ni, Cr, Mo, Al, and Re as a function of temperature. The designed five-element model can lead to a better understanding of phenomena that occur during the manufacture or heat treatment of modern, complex, multicomponent Ni-based superalloys.

Mechanism Regulating Self-Intercalation in Layered Materials.

Recent experimental breakthrough demonstrated a powerful synthesis approach for intercalating the van der Waals gap of layered materials to achieve property modulation, thereby opening an avenue for exploring new physics and devising novel applications, but the mechanism governing intercalant assembly patterns and properties remains unclear. Based on extensive structural search and energetics analysis by ab initio calculations, we reveal a Sabatier-like principle that dictates spatial arrangement of self-intercalated atoms in transition metal dichalcogenides. We further construct a robust descriptor quantifying that strong intercalant-host interactions favor a monodispersing phase of intercalated atoms that may exhibit ferromagnetism, while weak interactions lead to a trimer phase with attenuated or quenched magnetism, which further evolves into tetramer and hexagonal phases at increasing intercalant density. These findings elucidate the mechanism underpinning experimental observations and paves the way for rational design and precise control of self-intercalation in layered materials.

Chiral phonons: circularly polarized Raman spectroscopy and ab initio calculations in a chiral crystal tellurium.

Recently, phonons with chirality (chiral phonons) have attracted significant attention. Chiral phonons exhibit angular and pseudoangular momenta. In circularly polarized Raman spectroscopy, the peak split of the Γ 3 mode is detectable along the principal axis of the chiral crystal in the backscattering configuration. In addition, peak splitting occurs when the pseudoangular momenta of the incident and scattered circularly polarized light are reversed. Until now, chiral phonons in binary crystals have been observed, whereas those in unary crystals have not been observed. Here, we observe chiral phonons in a chiral unary crystal Te. The pseudoangular momentum of the phonon is obtained in Te by an ab initio calculation. From this calculation, we verified the conservation law of pseudoangular momentum in Raman scattering. From this conservation law, we determined the handedness of the chiral crystals. We also evaluated the true chirality of the phonons using a measure with symmetry similar to that of an electric toroidal monopole.

The Origin of Solvent Deprotonation in LiI-added Aprotic Electrolytes for Li-O2 Batteries.

LiI and LiBr have been employed as soluble redox mediators (RMs) in electrolytes to address the sluggish oxygen evolution reaction kinetics during charging in aprotic Li-O2 batteries. Compared to LiBr, LiI exhibits a redox potential closer to the theoretical one of discharge products, indicating a higher energy efficiency. However, the reason for the occurrence of solvent deprotonation in LiI-added electrolytes remains unclear. Here, by combining ab initio calculations and experimental validation, we find that it is the nucleophile I O 3 - ${{{\rm I}{\rm O}}_{3}^{-}}$ that triggers the solvent deprotonation and LiOH formation via nucleophilic attack, rather than the increased solvent acidity or the elongated C-H bond as previously suggested. As a comparison, the formation of B r O 3 - ${{{\rm B}{\rm r}{\rm O}}_{3}^{-}}$ in LiBr-added electrolytes is found to be thermodynamically unfavorable, explaining the absence of LiOH formation. These findings provide important insight into the solvent deprotonation and pave the way for the practical application of LiI RM in aprotic Li-O2 batteries.

Microstructure and Hydrogen Permeability of Nb-Ni-Ti-Zr-Co High Entropy Alloys.

Hydrogen separation membranes are one of the most promising technologies for hydrogen purification. The development of high-entropy alloys (HEAs) for hydrogen separation membranes is driven by a "cocktail effect" of elements with different hydrogen affinities to prevent hydride formation and retain high permeability due to the single-phase BCC structure. In this paper, equimolar and non-equimolar Nb-Ni-Ti-Zr-Co high entropy alloys were fabricated by arc melting. The microstructure and phase composition of the alloys were analyzed by scanning electron microscopy and X-ray diffraction, respectively. The hydrogen permeation experiments were performed at 300-500 °C and a hydrogen pressure of 4 bar. In order to estimate the effect of composition and lattice structure on hydrogen location and diffusivity in Nb-Ni-Ti-Zr-Co alloy, ab initio calculations of hydrogen binding energy were performed using virtual crystal approximation. It was found that Nb-enriched and near equimolar BCC phases were formed in Nb20Ni20Ti20Zr20Co20 HEA while Nb-enriched BCC and B2-Ni(Ti, Zr) were formed in Nb40Ni25Ti18Zr12Co5 alloy. Hydrogen permeability tests showed that Nb20Ni20Ti20Zr20Co20 HEA shows lower activation energy and higher permeability at lower temperatures as well as higher resistance to hydrogen embrittlement compared to Nb40Ni25Ti18Zr12Co5 alloy. The effect of composition, microstructure and hydrogen binding energies on permeability of the fabricated alloys was discussed.

Ab initio calculation based solvent system selection in silico for counter-current chromatography: Separation of resibufogenin glycosylation products.

In this study, a strategy based on COSMO-RS (Conductor-like Screening Model for Real Solvents) with a constrained optimization calculation was developed for ab initio calculation based solvent system selection in silico for counter-current chromatography. The separation of resibufogenin glycosylation products was selected as an example to show its practicability. The selected solvent system in silico gave the K values consistent with the experimentally measured data (RMSD=0.2861) and the glycosylation products, namely Resibufogenin-3-O-ß-D-glucoside (R-G) and Resibufogenin-3-O-ß-D-glucosyl (1→2)-ß-D-glucoside (R-2G), were successfully separated by HSCCC.

Antioxidation activity of molecular hydrogen via protoheme catalysis in vivo: an insight from ab initio calculations.

Recently, molecular hydrogen has been found to exhibit antioxidation activity through many clinical experiments, but the mechanism has not been fully understandable at atomic level. In this work, we perform systematic ab initio calculations of protoheme-hydrogen complexes to clarify the antioxidation mechanism of molecular hydrogen. We make molecular modeling of iron-protoporphyrin coordinated by imidazole, FeP(Im), and its hydrogen as well as dihydrogen complexes, together with reactive oxygen/nitrogen species (RONS). We carry out structural optimization and Mulliken charge analysis, revealing the two kinds of bonding characteristics between FeP(Im) and H[Formula: see text]: dihydrogen bonding in the end-on asymmetric configuration and Kubas bonding in the side-on symmetric configuration of H[Formula: see text] molecule. The activation barriers for adsorption and dissociation of H[Formula: see text] on and further desorption of H atom from FeP(Im) are found to be below 2.78 eV at most, which is remarkably lower than the H-H bond breaking energy of 4.64 eV in free H[Formula: see text] molecule. We find that the hydrogen bond dissociation energies of FeP(Im)-H[Formula: see text] and -H complexes are lower than those of RONS-H complexes, indicating the decisive role of protoheme as an effective catalyst in RONS antioxidation by molecular hydrogen in vivo.

Electronic, non-linear optical, optoelectronic, and thermodynamic properties of undoped and doped bis (ethylenedithio) tetraselenafulvalene (BETS) (C10H8S4Se4) molecule: first study using ab initio investigation.

We have performed the ab initio calculation of the undoped and doped molecules bis (ethylenedithio) tetraselenafulvalene (BETS). Carbone (C) atoms have been substituted by Boron (B) to investigate their effects on the electronic structure and nonlinear optical, optoelectronic, and thermodynamic properties of BETS molecule. The RHF and hybrid density functional theories (WB97XD, B3PW91, and B3LYP) methods were applied, using the cc-pVDZ basis set. We found that the energy gap (Egap) of the doped molecules are respectively 2.476 eV and 2.569 eV for C8B2H8S4Se4 and C7B3H8S4Se4 with B3LYP/cc-pVDZ basis set, lower than one of the undoped molecule (3.316 eV). The significant increase values of polarizability (˂α˃) and first order hyperpolarizability (ß) of the doped compounds, especially in C8B2H8S4Se4 (< α > = 4.5315 × 10-23 esu, ß = 22,672.27 × 10-33 esu and < α > = 4.518 × 10-23 esu, ß = 23,657.43 × 10-33 esu respectively for B3LYP and B3PW91) compared to those of the undoped molecule (< α > = 4.3602 × 10-23 esu, ß = 1290.38 × 10-33 esu, and < α > = 4.518 × 10-23 esu) show that the new molecules have a good nonlinear optical property. Results suggest that these molecules doped with boron are a potential candidate as semiconductors compounds and nonlinear optical materials.

Development of Nd (III)-Based Terahertz Absorbers Revealing Temperature Dependent Near-Infrared Luminescence.

Molecular vibrations in the solid-state, detectable in the terahertz (THz) region, are the subject of research to further develop THz technologies. To observe such vibrations in terahertz time-domain spectroscopy (THz-TDS) and low-frequency (LF) Raman spectroscopy, two supramolecular assemblies with the formula [NdIII (phen)3 (NCX)3] 0.3EtOH (X = S, 1-S; Se, 1-Se) were designed and prepared. Both compounds show several THz-TDS and LF-Raman peaks in the sub-THz range, with the lowest frequencies of 0.65 and 0.59 THz for 1-S and 1-Se, and 0.75 and 0.61 THz for 1-S and 1-Se, respectively. The peak redshift was observed due to the substitution of SCN- by SeCN-. Additionally, temperature-dependent TDS-THz studies showed a thermal blueshift phenomenon, as the peak position shifted to 0.68 THz for 1-S and 0.62 THz for 1-Se at 10 K. Based on ab initio calculations, sub-THz vibrations were ascribed to the swaying of the three thiocyanate/selenocyanate. Moreover, both samples exhibited near-infrared (NIR) emission from Nd (III), and very good thermometric properties in the 300-150 K range, comparable to neodymium (III) oxide-based thermometers and higher than previously reported complexes. Moreover, the temperature dependence of fluorescence and THz spectroscopy analysis showed that the reduction in anharmonic thermal vibrations leads to a significant increase in the intensity and a reduction in the width of the emission and LF absorption peaks. These studies provide the basis for developing new routes to adjust the LF vibrational absorption.

Computational Design to Suppress Thermal Runaway of Li-Ion Batteries via Atomic Substitutions to Cathode Materials.

The cathode material of a lithium-ion battery is a key component that affects durability, capacity, and safety. Compared to the LiCoO2 cathode material (the reference standard for these properties), LiNiO2 can extract more Li at the same voltage and has therefore attracted considerable attention as a material that can be used to obtain higher capacity. As a trade-off, it undergoes pyrolysis relatively easily, leading to ignition and explosion hazards, which is a challenge associated with the application of this compound. Pyrolysis has been identified as a structural phase transformation of the layered rocksalt structure → spinel → cubic rocksalt. Partial substitution of Ni with various elements can reportedly suppress the transformation and, hence, the pyrolysis. It remains unclear which elemental substitutions inhibit pyrolysis and by what mechanism, leading to costly material development that relies on empirical trial and error. In this study, we developed several possible reaction models based on existing reports, estimated the enthalpy change associated with the reaction by ab initio calculations, and identified promising elemental substitutions. The possible models were narrowed down by analyzing the correlations of the predicted dependence of the reaction enthalpies on elemental substitutions, compared between different reaction models. According to this model, substitution by P and Ta affords the highest enthalpy barrier between the initial (layered rocksalt) and the final (cubic rocksalt) structures but promotes the initial transformation to spinel as a degradation. Substitution by W instead generates the barrier to the final (preventing dangerous incidents) process, as well as for the initial degradation to spinel; therefore, it is a promising strategy to suppress the predicted pyrolysis.