Deterministic Localization for Fully Automatic Operation: A Survey and Experiments.

With the rapid development of fully automatic operation (FAO) and location-based services, the evaluation criteria of average localization accuracy can no longer meet our demands, in favor of deterministic localization. However, most localization researches modeled localization performance function and enhanced it by minimizing average localization root mean square error (RMSE). The performance degradation in a small region was not considered. In this paper, we present a survey of deterministic localization and analyze the relationship between accuracy and certainty. In this paper, two common solutions of localization enhancement are presented and their localization certainties are discussed. Furthermore, we carry out related localization enhancement experiments in rail transit line and analyze their improvement on deterministic localization. The experimental results show that the overall localization performance is improved, while the deterministic localization requires the stricter solution to promote.

Surface defect detection of ceramic disc based on improved YOLOv5s.

Addressing the challenges in detecting surface defects on ceramic disks, such as difficulty in detecting small defects, variations in defect sizes, and inaccurate defect localization, we propose an enhanced YOLOv5s algorithm. Firstly, we improve the anchor frame structure of the YOLOv5s model to enhance its generalization ability, enabling robust defect detection for objects of varying sizes. Secondly, we introduce the ECA attention mechanism to improve the model's accuracy in detecting small targets. Under identical experimental conditions, our enhanced YOLOv5s algorithm demonstrates significant improvements, with precision, F1 scores, and mAP values increasing by 3.1 %, 3 %, and 4.5 % respectively. Moreover, the accuracy in detecting crack, damage, slag, and spot defects increases by 0.2 %, 4.7 %, 5.4 %, and 1.9 % respectively. Notably, the detection speed improves from 232 frames/s to 256 frames/s. Comparative analysis with other algorithms reveals superior performance over YOLOv3 and YOLOv4 models, showcasing enhanced capability in identifying small target defects and achieving real-time detection.

Proximal foundation anchor variations and their correlation with unplanned return to the operating room (UPROR) in children with EOS treated with magnetically controlled growing rods (MCGR).

INTRODUCTION: The evolution of MCGR technique has led to modifications in the configuration of the proximal construct to decrease the incidence of implant-related complications (IRC) and revision surgeries. However, there is no data characterizing the performance of the most used configurations reducing the risk of complications. METHODS: 487 patients were identified from an international multicenter EOS database. INCLUSION CRITERIA: EOS patients, primary dual MCGR, complete radiographs, and minimum of 2-year follow-up. 76 patients had incomplete X-rays, 5 had apical fusions, and 18 had inconclusive complications, leaving 388 patients for review. A digital spine template was created to document UIV; number of levels; number, type, and location of anchors; as well as implant configuration. First available postoperative and latest follow-up radiographs were reviewed by two senior surgeons and two spine fellows. UPROR due to IRC was defined as any change in proximal anchors between the postoperative and final follow-up radiographs. RESULTS: The most common proximal construct configuration: UIV at T2 (50.0%) with 17.5% UPROR, followed by T3 (34.0%) with 12.1% UPROR; number of levels was three (57.1%) with 16.8% UPROR and two (26.0%) with 17.0% UPROR; number of proximal anchors was six (49.9%) with 14.1% UPROR and four (27.0%) with 18.3% UPROR. The most common anchors were all screws (42.0%) with 9.9% UPROR, and all hooks (26.4%) with 31.4% UPROR (P < 0.001). The construct with the lowest rate of UPROR was a UIV at T2, with six anchors (all screws) across three levels (42 cases), with 0% UPROR. Other construct combinations that yielded 0% UPROR rates were UIV of T3, six anchors (all screws) across three levels (25 cases), and a UIV of T3 with six anchors (screws and hooks) across three3 levels (9 cases). CONCLUSION: Proximal anchor configuration impacts the incidence of UPROR due to IRC in MCGR. UIV at T2 and T3 compared to T4, and the use of all screws or combination of screws and hooks compared to all hooks were associated with a lower UPROR rate. The most common construct configuration was T2 UIV, three levels, six anchors, and all screws. The use of a combination of six anchors (screws or screws and hooks) across three levels with a UIV at T2 or T3 was associated with a lower UPROR rate. Additional research is needed to further evaluate the variables contributing to configuration selection and their association with IRC.

Superior load-to-failure in an all-suture anchor system for all-inside meniscal repair compared to a PEEK-cage anchor system in an experimental cadaveric test setting.

Purpose: The purpose of this study was to compare the biomechanical properties of a latest generation all-suture anchor repair device (ASARD) for meniscal repair with that of a latest generation PEEK-cage anchor repair device (PCARD) in an experimental setting using cadaveric menisci. Methods: Twenty-six menisci were obtained from the knees of fresh body donors. Artificially created meniscal lesions were treated randomly, using a single stitch with either an ASARD or a PCARD. Cyclic biomechanical testing, utilising a universal material testing machine and following an established protocol, was carried out and load-to-failure (LTF), displacement, stiffness, and mode-of-failure (MOF) reported. Results: Mean LTF was found to be 61% higher in the ASARD group at 107.10 N (standard deviation [SD], 42.34), compared to 65.86 N (SD, 27.42) in the PCARD group with statistical significance (p = 0.022). The ASARD exhibited a trend towards higher stiffness (10.35 N; SD, 3.92 versus 7.78 N; SD; 3.59) and higher displacement at cycles one, 100, and 499 (1.64, 3.27, and 4.17 mm versus 0.93, 2.19, and 2.83 mm) compared to the PCARD. Cheese wiring was the most common mode-of-failure in both groups (76.9%). Conclusions: This study demonstrates that an ASARD shows a higher mean LTF than a PCARD when compared in an experimental biomechanical setting. Level of evidence: Level III.

Percutaneous ultrasound-guided anchor wire placement aids in the intraoperative localization of nonpalpable, superficial foreign bodies and abscesses in dogs.

OBJECTIVE: To describe and evaluate the use of preoperative percutaneous ultrasound-guided anchor wire placement to aid intraoperative localization of superficial foreign bodies and abscesses in dogs. ANIMALS: 11 dogs. CLINICAL PRESENTATION: In a retrospective observational study, the medical records of dogs that underwent surgical exploration of superficial abscesses, guided by anchor wire, between 2018 and 2023 were reviewed for clinical and histopathological findings and complications. Owners or veterinarians were contacted to collect long-term follow-up information. RESULTS: 11 dogs were included. Superficial swelling was the most common clinical presentation. Computed tomography and ultrasound revealed an abscess cavity and suspected foreign body in 9 dogs and an abscess cavity without evidence of a foreign body in 2 dogs. Anchor wires were placed in close proximity to the foreign body or inside the abscess. All documented foreign bodies were successfully located and retrieved. Two dogs suffered minor postoperative complications. No major intra- or postoperative complications were documented. One dog displayed recurrence of clinical signs, but no further surgical management was required. CLINICAL RELEVANCE: Preoperative percutaneous placement of an anchor wire via ultrasound guidance was successful in aiding intraoperative localization of nonpalpable abscesses and retrieval of foreign bodies. This technique may decrease surgical time, minimize the surgical approach required, and increase the likelihood of successful localization.

3D-printed porous titanium suture anchor: a rabbit lateral femoral condyle model.

BACKGROUND: The inclusion of a connecting path in a porous implant can promote nutrient diffusion to cells and enhance bone ingrowth. Consequently, this study aimed to evaluate the biomechanical, radiographic, and histopathological performance of a novel 3D-printed porous suture anchor in a rabbit femur model. METHODS: Three test groups were formed based on the type of suture anchor (SA): Commercial SA (CSA, Group A, n = 20), custom solid SA (CSSA, Group B, n = 20), and custom porous SA (CPSA, Group C, n = 20). The SAs were implanted in the lateral femoral condyle of the right leg in each rabbit. The rabbits (New Zealand white rabbits, male, mean body weight of 2.8 ± 0.5 kg, age 8 months) underwent identical treatment and were randomized into experimental and control groups via computer-generated randomization. Five rabbits (10 femoral condyles) were euthanized at 0, 4, 8, and 12 weeks post-implantation for micro-CT, histological analysis, and biomechanical testing. RESULTS: At 12 weeks, the CPSA showed a higher BV/TV (median 0.7301, IQR 0.7276-0.7315) than the CSSA and CSA. The histological analysis showed mineralized osteocytes near the SA. At 4 weeks, new bone was observed around the CPSA and had penetrated its porous structure. By 12 weeks, there was no significant difference in ultimate failure load between the CSA and CPSA. CONCLUSIONS: We demonstrated that the innovative 3D-printed porous suture anchor exhibited comparable pullout strength to conventional threaded suture anchors at the 12-week postoperative time-point period. Furthermore, our porous anchor design enhanced new bone formation and facilitated bone growth into the implant structure, resulting in improved biomechanical stability.

Efficient Sodium Storage in Cu1.96S@NC Anode Achieved by Robust S─C Bonds and Current Collector Self-Induced Forming Cu2S Quantum Dots.

Transition metal sulfides are investigation hotspots of anode material for sodium-ion batteries (SIBs) due to their structural diversity and high storage capacity. However, they are still plagued by inevitable volume expansion during sodiation/desodiation and an unclear energy storage mechanism. Herein, a one-step sulfidation-carbonization strategy is proposed for in situ confined growth of Cu1.96S nanoparticles in nitrogen-doped carbon (Cu1.96S@NC) using octahedral metal-organic framework (Cu-BTC) as a precursor and investigate the driving effect of Cu current collector on its sodium storage. The generation of S─C bonds in Cu1.96S@NC avoids the volume change and structural collapse of Cu1.96S nanoparticles during the cycling process and improves the adsorption and transport capacity of the material for Na+. More exciting, the Cu species in the Cu current collector are self-induced forming Cu2S quantum dots to enter the original anode material during the initial few charging and discharging cycles, which unique small-size effect and abundant edge-active sites enhance the energy storage capacity of Cu1.96S. Thus, the Cu1.96S@NC exhibits a superior first discharge capacity of 608.56 mAh g-1 at 0.2 A g-1 with an initial Coulomb efficiency (ICE) of 75.4%, as well as provides excellent rate performance and long cycle durability up to 2000 cycles.

Severe Maxillary Protrusion Treated with Surgically Assisted Rapid Maxillary Expansion.

In this case, surgically assisted rapid maxillary expansion (SARME) was successfully adopted to treat a skeletal maxillary protrusion with large overjet and severe crowding. The female patient, aged 25 years and 11 months, was diagnosed with skeletal maxillary protrusion with severe crowding and excessive overjet associated with labially inclined maxillary central incisors. After achieving sufficient space for surgical incision between bilateral maxillary central incisors, the SARME was performed. A total of 8.0 mm lateral expansion of the maxilla was completed. At 48 days after surgery, the Hyrax appliance was replaced with an Anchor-Lock system used as an external surgical stent and skeletal anchorage for maxillary group distalization, and the distal movement of the maxillary molars was initiated without waiting for bone healing of the separated midpalatal suture by SARME. Twenty-five months' treatment, including surgical preparation, achieved an acceptable and stable occlusion with adequate interincisal relationship. The occlusion was much more stable with a little relapse through more than 4 years' retention period. In conclusion, SARME followed by the Anchor-Lock system might lead to favorable occlusal outcome in the long term without any relapses.

Systematic review reveals that EQ-5D minimally important differences decrease with increasing baseline score and may vary with treatment type.

OBJECTIVE: To provide an updated summary of published anchor-based Minimum Important Difference (MID) estimates for the EQ-5D index (EQ index) and visual analogue scale (EQ VAS) scores and identify factors influencing those estimates. STUDY DESIGN AND SETTING: We systematically searched eight electronic databases from January 1990 to March 2023. We examined the association of baseline score, type of score change (improvement/worsening), data source, value set, disease/condition, treatment type (surgical/non-surgical), and type of anchor (clinical vs self-rated) with MID estimates for the EQ-5D-3L and EQ-5D-5L indices, and EQ VAS. Significant variables were used to develop prediction formulas for MID by testing both linear and non-linear regression models. RESULTS: Of 6,786 records reviewed, 47 articles were included for analysis. MID ranges for improved scores were -0.13-0.68 (EQ-5D-3L), 0.01-0.41 (EQ-5D-5L), and 0.42-23.0 (EQ VAS). Surgical intervention and lower baseline scores were associated with higher MIDs for both the EQ indices but not for EQ VAS. The non-linear logarithmic model outperformed the linear model in predicting the MIDs. MIDs based on deteriorated scores were insufficient for quantitative synthesis (mean: -0.02 for EQ-5D-3L; -0.04 for EQ-5D-5L; and -6.5 for EQ VAS). CONCLUSION: This review revealed that the MID of EQ-5D index scores varies with baseline score and treatment type, indicating that use of a uniform MID may not be appropriate. We recommend using baseline score-adjusted and treatment type-specific EQ-5D MIDs, and call for more MID research, particularly in the context of assessing deterioration in health using this widely used generic health-status instrument.

Clinical Outcomes for Arthroscopic Anterior Talofibular Ligament Repair After Suture Anchor Insertion Through the Anterolateral Portal vs the Lateral Accessory Portal.

BACKGROUND: Two types of suture anchor insertion pathways (anterolateral portal vs lateral accessory portal) are used in arthroscopic anterior talofibular ligament (ATFL) repair. However, it is not clear which one is the better choice. This study aims to compare the clinical outcomes of these 2 suture anchor insertion pathways when performing arthroscopic ATFL lasso-loop repair for the treatment of chronic lateral ankle instability (CLAI). METHODS: From 2019 to 2021, patients with CLAI who underwent arthroscopic ATFL lasso-loop repair were retrospectively reviewed and divided into the anterolateral portal (ALP) group and the lateral accessory portal (LAP) group. A 1:1 propensity score matching was used to control confounding factors based on age, sex, body mass index, follow-up duration, preoperative visual analog scale (VAS) score, and Tegner score (ALP group, n = 26; LAP group, n = 26). Karlsson score, VAS score, Tegner score, operation time, anterior drawer test results, patient symptoms, and magnetic resonance (MR) evaluation of ATFL quality were used to describe the outcomes. RESULTS: The patient characteristics and follow-up durations were similar between the 2 groups. After a mean follow-up duration of 28.8 ± 2.3 months, the ALP group had significantly better Karlsson score, VAS score, and Tegner score improvement than the LAP group, with fewer symptoms. Seven patients in the LAP group still had a feeling of ankle instability, and 3 of them exhibited ankle laxity. CONCLUSION: In this study, we found that inserting the suture anchor through the anterolateral portal was associated with better outcomes compared to that through the lateral accessory portal when performing arthroscopic ATFL lasso-loop repair for CLAI patients. The improvement was greater for pain relief and function and was associated with a lower frequency of subjective ankle instability.

Open Repair of Posterior Cruciate Ligament Tibial Bony Avulsion With Metal Anchor: A Case Report.

Introduction: The posterior cruciate ligament (PCL) is the largest and strongest intra-articular ligament of the knee joint and the primary posterior stabilizer. PCL injuries are less frequent than other knee ligament injuries and are typically combined with meniscal and chondral injuries or in the context of multiligamentous injuries. It is critical to properly diagnose and treat these lesions in order to avoid the risk of PCL insufficiency, subsequent knee instability, and early osteoarthritis. Surgical management can vary, and the ideal fixation device is still debated. Suture anchors are an unusual mean of fixation of PCL tibial bony avulsion. We report on two patients treated with open anchor fixation for PCL tibial bony avulsion with a follow-up of 3 years. Case Presentation: A 15-year-old male and a 65-year-old male were treated with open anchor fixation for bony tibial avulsion of the PCL. Surgical treatment was performed at 5 weeks and 3 weeks after the trauma, respectively. Diagnosis was made with an X-ray followed by CT and MR scans. Repair was achieved by reinserting the PCL bony fragment to its posterior tibial eminence with suture anchors through an open posterior approach. Both patients recovered full knee stability and a pain-free full range of motion (ROM) within 4 months and returned to their previous activities with a high satisfaction. The patient has been followed up for 3 years, and no complications were observed. Conclusion: PCL bony avulsions are rare, and their optimal treatment remains a significant subject of debate, particularly in the skeletally immature patient. We believe that open repair with metal anchors could be a good choice to repair PCL bony tibial avulsion in patients without concomitant intra-articular lesions and immature growth plates or severe fragmentation.

Glycosylphosphatidylinositol anchor biosynthesis pathway-based biomarker identification with machine learning for prognosis and T cell exhaustion status prediction in breast cancer.

As the primary component of anti-tumor immunity, T cells are prone to exhaustion and dysfunction in the tumor microenvironment (TME). A thorough understanding of T cell exhaustion (TEX) in the TME is crucial for effectively addressing TEX in clinical settings and promoting the efficacy of immune checkpoint blockade therapies. In eukaryotes, numerous cell surface proteins are tethered to the plasma membrane via Glycosylphosphatidylinositol (GPI) anchors, which play a crucial role in facilitating the proper translocation of membrane proteins. However, the available evidence is insufficient to support any additional functional involvement of GPI anchors. Here, we investigate the signature of GPI-anchor biosynthesis in the TME of breast cancer (BC)patients, particularly its correlation with TEX. GPI-anchor biosynthesis should be considered as a prognostic risk factor for BC. Patients with high GPI-anchor biosynthesis showed more severe TEX. And the levels of GPI-anchor biosynthesis in exhausted CD8 T cells was higher than normal CD8 T cells, which was not observed between malignant epithelial cells and normal mammary epithelial cells. In addition, we also found that GPI -anchor biosynthesis related genes can be used to diagnose TEX status and predict prognosis in BC patients, both the TEX diagnostic model and the prognostic model showed good AUC values. Finally, we confirmed our findings in cells and clinical samples. Knockdown of PIGU gene expression significantly reduced the proliferation rate of MDA-MB-231 and MCF-7 cell lines. Immunofluorescence results from clinical samples showed reduced aggregation of CD8 T cells in tissues with high expression of GPAA1 and PIGU.

Conjugate Polymer Anchor Enhancing Matrix Vacuum Stability and Improving MALDI MSI via Ion Bond.

Poor vacuum stability limits the application of many matrices in matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI) that requires long-term measurement duration in high vacuum. In this study, a new approach using conjugate polymer anchor to protect unstable matrix from volatilizing in MALDI source based on ion bond is provided. Unlike strong covalent bonds which often introduce unnecessary groups, the weaker ion bonds are more conducive to breaking under laser radiation while effectively preventing matrix volatilization in a vacuum environment. The results confirm that conjugate polymer anchor will neither introduce additional ion peaks nor affect signal intensity, yet maintains comparable quantification properties. Vacuum stability of three kinds of typical matrices is enhanced using polymer anchors, and the in situ MALDI MS imaging of mouse brain and liver cancer is improved significantly.

Care partner-informed meaningful change thresholds for the Clinical Dementia Rating-Sum of Boxes for trials of early Alzheimer's disease.

INTRODUCTION: Consensus definitions of meaningful within-patient change (MWPC) on the Clinical Dementia Rating-Sum of Boxes (CDR-SB) are needed. Existing estimates use clinician-rated anchors in clinically diagnosed Alzheimer's disease (AD) populations. Incorporating the care partner perspective offers important insights, and evaluating biomarker-confirmed cohorts aligns estimates with ongoing trials. METHODS: Anchor-based analyses were conducted to evaluate MWPC on the CDR-SB in early AD (Tauriel; NCT03289143) using Caregiver Global Impression of Change in memory or daily activities. RESULTS: Across time points and anchors, mean CDR-SB changes associated with the "somewhat worse" category ranged from 1.50 to 2.12 in early AD, 1.07 to 2.06 in mild cognitive impairment-AD, and 1.79 to 2.25 in mild AD. DISCUSSION: The proposed ranges are appropriate to define meaningful progression on the CDR-SB in similar cohorts and support the interpretation of treatment benefit through MWPC analyses. Thresholds should be calibrated to the context of use; lower/higher thresholds may be applicable in studies of earlier/later disease over shorter/longer durations. HIGHLIGHTS: Within-patient CDR-SB change thresholds are provided using caregiver-rated anchors. 1.5 to 2.5 points may be an appropriate range in early AD trials of similar durations. Cumulative distribution function plots illustrate the benefit of a given treatment. When selecting thresholds, the target population and study design should be considered.

A clinical review of elbow ligament repairs and reconstructions in the acute and chronic settings.

Background: The ligamentous and osseous structures of the elbow joint are the major contributors to its inherent stability and damage to any of these structures can result in elbow instability. The aim of this study is to present objective and subjective outcomes following ligament repairs and/or reconstructions for acute elbow instability and chronic elbow instability. Methods: This study included patients who underwent an elbow ligament repair and/or reconstruction for acute or chronic elbow instability. We performed a comprehensive retrospective data analysis of the patient's files, followed by a clinical examination and X-ray of these patients. Results: We identified 12 acute stabilizations and 22 stabilizations for chronic instability. Patients who underwent stabilization for chronic instability had statistically significant improvements in their preoperative flexion and extension; 14.8 ± 6.4° and 5.9 ± 2.5°. Patients with chronic instability achieved better extension-flexion and pronation-supination arcs compared with their acute instability counterparts and this reached statistical significance. When the elbow pain and function scores were compared, we found stabilizations in the acute setting had better outcomes. There were two cases of postoperative instability, one in the acute instability group and one in the chronic instability group. Conclusion: This study provides evidence for elbow ligament repairs and reconstructions in both acute and chronic settings. It is an effective way of stabilizing the elbow joint in chronic instability patients, and results in an improvement in their overall range of motion. These patients achieved a greater range of motions compared with their acute instability counterparts.

Safety and efficacy of second-generation all-suture anchors in labral tear arthroscopic repairs: prospective, multicenter, 1-year follow-up study.

Background: This study's primary aim was to assess the safety and performance of second-generation all-soft suture anchors following arthroscopic labral tear repair. Methods: This prospective, multicenter study was conducted by 6 surgeons at 6 sites in Europe and the United States between November 2018 and August 2020. Patients who required shoulder arthroscopic repair, for a range of labral injuries, were treated with a second-generation all-soft suture anchor. The primary outcome was clinical success rate (percentage of patients without signs of failure and/or reintervention) at 6 months. Secondary outcomes included clinical success rate at 12 months, intraoperative anchor deployment success rate, and patient-reported outcomes (PROs) at 6 and 12 months, including visual analog scale (VAS) pain assessment, VAS satisfaction assessment, EQ-5D-5L Index Score, EQ-5D-5L VAS Health Score, Rowe Shoulder Score for Instability, American Shoulder and Elbow Surgeons score, and Constant-Murley Shoulder Score. Serious adverse events and serious adverse device effects were collected throughout the study. Results: Forty-one patients were enrolled (mean age, 28.2 years; 87.8% male, 12.2% female). Clinical success was achieved in 27/28 and 31/32 patients at 6 months and 12 months, respectively. Anchor deployment had a 100% success rate. Significant improvements over baseline were reported for all PROs except Constant-Murley Shoulder (6 months) and VAS Satisfaction Score (12 months). One patient experienced 1 serious adverse event and 1 patient experienced 1 serious adverse device effect. Conclusion: Second-generation all-soft suture anchors used in this study demonstrated a high clinical success rate, a favorable safety profile, and patients exhibited significant improvement in PROs.

Closed Traumatic Avulsion of Both Flexor Digitorum Tendons: An Addition to the Leddy and Packer Classification and Review of the Literature.

Objective: We encountered the case of a patient who presented with an avulsion of both flexor digitorum profundus (FDP) and flexor digitorum superficialis (FDS) tendons from their respective insertion in the ring finger. We aim to discuss the novel treatment of this injury pattern in the context of all previously encountered cases in the literature. Materials and Methods: We examined the case of our patient with avulsion of both flexor tendons in the same finger and discuss the novel method of treatment in our case. Additionally, we performed a literature review of all previous reported cases and discuss the treatment modalities and outcomes associated with each. Results: We have shown a novel and successful treatment technique for avulsion of both the FDP and FDS tendons. We identified twelve other cases of this injury pattern and have compared all outcomes documented. Conclusion: Closed tendon avulsion of both flexor tendons in the same finger is rare. We described a case and additionally propose a modification to the flexor tendon avulsion classification to incorporate this injury pattern and aid its management.

Alkyl anchor-modified artificial viral capsid budding outside-to-inside and inside-to-outside giant vesicles.

The budding of human immunodeficiency virus from an infected host cell is induced by the modification of structural proteins bearing long-chain fatty acids, followed by their anchoring to the cell membrane. Although many model budding systems using giant unilamellar vesicles (GUVs) induced by various stimuli have been developed, constructing an artificial viral budding system of GUVs using only synthesized molecules remains challenging. Herein, we report the construction of an artificial viral capsid budding system from a lipid bilayer of GUV. The C-terminus of the ß-annulus peptide was modified using an octyl chain as an alkyl anchor via a disulfide bond. The self-assembly of the ß-annulus peptide with an octyl chain formed an artificial viral capsid aggregate. The fluorescence imaging and transmission electron microscopy observations revealed that the addition of the tetramethylrhodamine (TMR)-labeled octyl chain-bearing ß-annulus peptide to the outer aqueous phase of GUV induced the budding of the capsid-encapsulated daughter vesicle outside-to-inside the mother GUV. Conversely, the encapsulation of the TMR-labeled octyl chain-bearing ß-annulus peptide in the inner aqueous phase of GUV induced the budding of the capsid-encapsulated daughter vesicle inside-to-outside the mother GUV. Contrarily, the addition of the TMR-labeled ß-annulus peptide to GUV barely induced budding. It was demonstrated that the higher the membrane fluidity of GUV, the more likely budding would be induced by the addition of the alkyl anchor-modified artificial viral capsid. The simple virus-mimicking material developed in this study, which buds off through membrane anchoring, can provide physicochemical insights into the mechanisms of natural viral budding from cells.

Construction of an artificial viral budding system of GUVs using only synthesized molecules remains challenging. This study firstly demonstrates that budding outside-to-inside and inside-to-outside GUVs are induced by addition of alkyl anchor-modified artificial viral capsid.

Skin integrity preservation using a nurse-constructed silicone adhesive Foley catheter.

AIMS: Skin breakdown is common in the intensive care unit (ICU). This pilot evaluation aimed to determine whether a nurse-constructed urinary catheter securement device using a silicone adhesive could reduce the complications of blistering and other skin breakdowns in a high-risk ICU population with Foley catheters. DESIGN: A prospective, non-randomised performance improvement study using a convenience sample was carried out. SUBJECTS AND SETTING: The study sample consisted of 29 patients with urethral Foley catheters and any degree of thigh oedema in a surgical ICU at an academic quarternary medical center. METHODS: Patients were fitted with a standard acrylic-adhesive catheter securement device on one thigh and a nurse-constructed device on the contralateral thigh. At the beginning of each 12-hour shift, the nurse moved the Foley catheter from one securement device to the other; the nurse recorded the assessment findings at the end of the shift. RESULTS: The average age of the 29 patients was 61±16 (range 20-87) years. Visible skin compromise occurred in 21% of the time with the standard acrylic securement device; an equal percentage of men and women developed skin breakdown. Oedema status was a significant factor related to skin breakdown. There was no visible damage to the skin associated with the nurse-constructed silicone-adhesive device. CONCLUSIONS: A silicone adhesive urinary catheter securement device causes less skin damage than one with acrylic adhesive. One-step application, pain-free and atraumatic removal, and reliable securement are essential considerations in product development.

Effect of cyclic loading on the ultimate tensile strength of small metallic suture anchors used for attaching artificial tendons in rabbits.

Background ­: Suture anchor failures can lead to revision surgeries which are costly and burdensome for patients. The durability of musculoskeletal reconstructions is therefore partly affected by the design of the suture anchors. Purpose ­: The purpose of the study was to quantify the strength of different suture anchors whose sizes are suitable for attaching artificial Achilles and tibialis cranialis tendons in a rabbit model, as well as determine the effect of cyclic loading on the anchoring strength. Method ­: Four anchors (two with embedded eyelet and two with raised eyelet, n=5 per group) were tested with cyclical loading (1000 cycles and 4.5 mm/sec) and without cycling, to inform the failure loads and mode of failure of the suture anchors. An eyebolt screw with smooth eyelet was used as a control for the test groups. Results ­: All samples in all groups completed 1000 cycles and failed via suture breakage in both test conditions. All anchors had failure loads exceeding the peak Achilles tendon force in rabbits during hopping gait. The data analysis showed an effect of anchor type on the maximum tensile force at failure (F max ) in all suture categories but not an effect of loading condition. Also, the Anika anchor had a significantly less adverse effect on suture strength compared to Arthrex anchor (p=0.015), IMEX anchor (p=0.004) and Jorvet anchor (p<0.001). We observed a greater percentage of failure at the mid-section for the anchors with the raised eyelets compared to the anchors with embedded eyelets, which all failed at the knot. Conclusion ­: Anchors with embedded eyelets had clinically preferred mode of failure with less adverse effects on suture and, may be more reliable than anchors with raised eyelets for attaching artificial Achilles and tibialis cranialis tendons in rabbits.