RESUMO
The structure, physicochemical and anti-freeze properties of natural deep eutectic solvent (NADES) composed of inulin and L-proline (molar ratio of 1:11) were investigated. Proton nuclear magnetic resonance (1H NMR), Fourier infrared spectroscopy (FTIR), and Raman spectroscopy revealed extensive hydrogen bonding in the pure NADES system, and the addition of water weakens the hydrogen bonding interactions between the components. The smaller transverse relaxation time (T2) represents the stronger hydrogen bond strength, and NADES+40 % H2O exhibited a large T2 (71.68 ms). When 10 % water was added, the viscosity decreased from 3620 mPa·s to 1777 mPa·s, but the conductivity increased to approximately twice the original value. Furthermore, adding 10 % water lowered the glass transition temperature (Tg) of NADES by 5.6 °C. NADES+10 % H2O exhibited favorable thermal stability and freezing resistance, as evidenced by the fact that approximately 82.61 % of the ice crystals area <200 µm2 after 30 min of crystallization. The changes in the structure, physicochemical, and anti-freezing properties of water-tailored NADES are expected to enable the design of novel antifreeze agents.
RESUMO
In this study, ultrafiltration fractions (<3 k Da, LMH; >3 k Da, HMH) and solid-phase extraction fractions (hydrophilic hydrolysate, HIH; hydrophobic hydrolysate, HOH) from trypsin hydrolysate purified from croceine croaker (Pseudosciaena crocea) isolate were obtained to investigate the cryoprotective effects of the different fractions, achieved by means of maceration of turbot fish meat after three freeze-thaw cycles. Alterations in the texture, color, moisture loss, myofibrillar protein oxidation stability and conformation, and microstructure of the fish were analyzed after freezing and thawing. The results demonstrate that HIH maximized the retention of fish texture, reduced moisture loss, minimized the oxidation and aggregation of myofibrillar proteins, and stabilized the secondary and tertiary structures of myofibrillar proteins compared to the control group. In conclusion, the HIH component in the trypsin hydrolysates of croceine croaker significantly contributes to minimizing freeze damage in fish meat and acts as an anti-freezing agent with high industrial application potential.
RESUMO
The development of new materials for antifreezing and anti-icing applications is a big challenge in industry and academic area. Inspired by the antifreeze proteins, latex particles with superhydrophilic zwitterionic shells and superhydrophobic cores are synthesized by reversible addition-fragmentation chain transfer emulsion polymerization, and the applications of the latex particles in antifreezing and anti-icing applications are investigated. In antifreezing study, the critical aggregate temperature (CAT) of the latex particles decreases, and the separation of the melting and freezing temperature of ice increases with the particle concentration. Enzyme molecules can be cryopreserved in the particle solution, and their bioactivities are well maintained. Latex particles are casted into latex films with dynamic surfaces. Anti-icing performances, including antifrosting properties, freezing delay time, and ice adhesion strengths, are studied; and the water-treated latex films present stronger anti-icing properties than other films, due to the synergistic effects of the superhydrophilic and superhydrophobic components. In addition, latex particles with zwitterionic shells and poly(n-butyl methacrylate) cores, and latex particles with small molecular surfactant on the surfaces are synthesized. The antifreezing performances of the latex particles and anti-icing properties of the latex films are compared.
RESUMO
Benefiting from the tissue-like mechanical properties, conductive hydrogels have emerged as a promising candidate for manufacturing wearable electronics. However, the high water content within hydrogels will inevitably freeze at subzero temperature, causing a degradation or loss of functionality, which severely prevent their practical application in wearable electronics. Herein, an anti-freezing hydrogel integrating high conductivity, superior stretchability, and robust adhesion was fabricated by dissolving choline chloride and gallium in gelatin/guar gum network using borax as the cross-linker. Based on the synergistic effect of dynamic borate ester bonds and hydrogen bonds, the hydrogel exhibited rapid self-healing property and excellent fatigue resistance. Profiting from these fascinating characteristics, the hydrogel was assembled as strain sensor to precisely detect various human activities with high strain sensitivity and fast response time. Meanwhile, the hydrogel was demonstrated high sensitivity and rapid response to temperature, which can be used as thermal sensor to monitor temperature. Moreover, the conductive hydrogel was encapsulated into supercapacitors with high areal capacitance and favorable cycle stability. Importantly, the flexible sensor and supercapacitors still maintain stable sensing performance and good electrochemical performance even at subzero temperature. Therefore, our work broaden hydrogels application in intelligent wearable devices and energy storage in extreme environments.
Assuntos
Condutividade Elétrica , Gelatina , Hidrogéis , Dispositivos Eletrônicos Vestíveis , Hidrogéis/química , Gelatina/química , Congelamento , Gomas Vegetais/química , Capacitância Elétrica , Mananas/química , Humanos , Metais/químicaRESUMO
The application of portable aluminum-air batteries (AABs) in extreme environments is an inevitable demand for future development. Aqueous electrolyte freezing is a major challenge for low-temperature operations. Conventionally, enlightened by the organic system in metal ion batteries, blindly increasing the concentration is regarded as an efficient technique to reduce the freezing point (FP). However, the underlying contradiction between the adjusting mechanism of the FP and OH- transportation is ignored. Herein, the aqueous alkali solution of CsOH is researched as a prototype to disclose the intrinsic conductive behavior and related solvent structure evolution. Different from these inorganic electrolyte systems, the concept of a critical anti-freezing concentration (CFC) is proposed based on a specific temperature. The relationship between hydrogen bond reconstruction and de-solvation behavior is analyzed. A high conductivity is obtained at -30 °C, which is also a recorded value in an intrinsic aqueous AAB. The homogenous dissolution of the Al anode is also observed. As a general rule, the CFC concept is also applied in both the KOH and NaOH systems.
RESUMO
Photochromic hydrogels have promising prospects in areas such as wearable device, information encryption technology, optoelectronic display technology, and electronic skin. However, there are strict requirements for the properties of photochromic hydrogels in practical engineering applications, especially in some extreme application environments. The preparation of photochromic hydrogels with high transparency, high toughness, fast response, colour reversibility, excellent electrical conductivity, and anti-freezing property remains a challenge. In this study, a novel photochromic hydrogel (PAAm/SA/NaCl-Mo7) was prepared by loading ammonium molybdate (Mo7) and sodium chloride (NaCl) into a dual-network hydrogel of polyacrylamide (PAAm) and sodium alginate (SA) using a simple one-pot method. PAAm/SA/NaCl-Mo7 hydrogel has excellent conductivity (175.9 S/cm), water retention capacity and anti-freezing properties, which can work normally at a low temperature of -28.4 °C. In addition, the prepared PAAm/SA/NaCl-Mo7 hydrogel exhibits fast response (<15 s), high transparency (>70 %), good toughness (maximum elongation up to 1500 %), good cyclic compression properties at high compressive strains (60 %), good biocompatibility (78.5 %), stable reversible discolouration and excellent sensing properties, which can be used for photoelectric display, information storage and motion monitoring. This work provides a new inspiration for the development of flexible electronic skin devices.
Assuntos
Resinas Acrílicas , Alginatos , Condutividade Elétrica , Hidrogéis , Cloreto de Sódio , Alginatos/química , Resinas Acrílicas/química , Hidrogéis/química , Cloreto de Sódio/química , Dispositivos Eletrônicos Vestíveis , Congelamento , Materiais Biocompatíveis/química , HumanosRESUMO
Hydrogel electrolyte can endow supercapacitors with excellent flexibility, which has developed rapidly in recent years. However, the water-rich structures of hydrogel electrolyte are easy to freeze at subfreezing and dry at high temperatures, which will affect its energy storage characteristics. The low energy density of micro supercapacitors also hinders their development. Herein, a strategy is proposed to reduce the free water activity in the hydrogel to improve the operating voltage and the energy density of the device, which is achieved through the synergistic effect of the hydrogel skeleton, N, N'-dimethylformamide (DMF), NaClO4 and water. High concentrations of DMF and NaClO4 are introduced into sodium alginate/polyacrylamide (SA/PAAM) hydrogel through solvent exchange to obtain SA/PAAM/DMF/NaClO4 hydrogel electrolyte, which exhibited a high ionic conductivity of 82.1 mS cm-1, a high breaking strength of 563.2 kPa, and a wide voltage stability window of 3.5 V. The supercapacitor devices are assembled by the process of direct adhesion of the hydrogel electrolyte and laser induced graphene (LIG). The micro-supercapacitor exhibited an operating voltage of 2.0 V, with a specific capacitance of 2.41 mF cm-2 and a high energy density of 1.34 µWh cm-2, and it also exhibit a high cycle stability, good flexibility, and integration performance.
RESUMO
Some drawbacks of aqueous electrolytes, such as freezing at low temperatures and extensive evaporation at high temperatures, restrict their industrial viability. This article introduces a stabilized neutral aqueous choline nitrate electrolyte with a 10 vol.% methanol additive that improves the temperature stability of the electrolyte via enhanced hydrogen bonding with the choline cation and water and maintains the good state of health of the supercapacitor cells under extreme operating conditions. The symmetric carbon/carbon supercapacitor in 5 mol/kg choline nitrate + 10 vol.% methanol (σ = 76 ms/cm at 25°C) exhibits 103 F/g at room temperature during galvanostatic charge/discharge up to 1.5 V, which decreases to 78 F/g at -40°C due to the suppressed Faradaic reactions occurring at the carbon electrode. However, under similar charge/discharge conditions, the capacitance increases to 112 F/g when the supercapacitor operates at 60°C. This capacitance increase at high temperatures is due to the Faradaic reactions related to enhanced hydrogen adsorption and desorption. The most remarkable aspect of the proposed supercapacitor is its ability to maintain capacitance and power performance during high voltage floating at 1.5 V at three tested temperatures (-40°C, 24°C, and 60°C).
RESUMO
Hydrogels are soft-wet materials with a hydrophilic three-dimensional network structure offering controllable stretchability, conductivity, and biocompatibility. However, traditional conductive hydrogels only operate in mild environments and exhibit poor environmental tolerance due to their high water content and hydrophilic network, which result in undesirable swelling, susceptibility to freezing at sub-zero temperatures, and structural dehydration through evaporation. The application range of conductive hydrogels is significantly restricted by these limitations. Therefore, developing environmentally tolerant conductive hydrogels (ETCHs) is crucial to increasing the application scope of these materials. In this review, we summarize recent strategies for designing multifunctional conductive hydrogels that possess anti-freezing, anti-drying, and anti-swelling properties. Furthermore, we briefly introduce some of the applications of ETCHs, including wearable sensors, bioelectrodes, soft robots, and wound dressings. The current development status of different types of ETCHs and their limitations are analyzed to further discuss future research directions and development prospects.
RESUMO
Hydrogels are currently in the limelight for applications in soft electronics but they suffer from the tendency to lose water or freeze when exposed to dry environments or low temperatures. Molecular crowding is a prevalent occurrence in living cells, in which molecular crowding agents modify the hydrogen bonding structure, causing a significant reduction in water activity. Here, a wide-humidity range applicable, anti-freezing, and robust hydrogel is developed through the incorporation of natural amino acid proline (Pro) and conductive MXene into polyvinyl alcohol (PVA) hydrogel networks. Theoretical calculations reveal that Pro can transform "free water" into "locked water" via the molecular-crowding effect, thereby suppressing water evaporation and ice forming. Accordingly, the prepared hydrogel exhibits high water retention capability, with 77% and 55% being preserved after exposure to 20 °C, 28% relative humidity (RH) and 35 °C, 90% RH for 12 h. Meanwhile, Pro lowers the freezing temperature of the hydrogel to 34 °C and enhances its stretchability and strength. Finally, the PVA/Pro/MXene hydrogels are assembled as multifunctional on-skin strain sensors and conductive electrodes to monitor human motions and detect tiny electrophysiological signals. Collectively, this work provides a molecular crowding strategy that will motivate researchers to develop more advanced hydrogels for versatile applications.
Assuntos
Eletrônica , Congelamento , Umidade , Hidrogéis , Álcool de Polivinil , Hidrogéis/química , Álcool de Polivinil/química , Humanos , Pele , Prolina/químicaRESUMO
Frost damage remains a significant challenge for agricultural practices worldwide, leading to substantial economic losses and food insecurity. Practically, traditional methods for frost management have proven ineffective and come with several drawbacks, such as energy consumption and limited efficacy. Hence, proposing an anti-freezing coating can be an innovative idea. The potential of sodium alginate (SA) to construct anti-freezing hydrogels has been explored in several sciences. SA hydrogels can form protective films around plants as a barrier against freezing temperatures and ice crystals on the plant's surface. Sodium alginate exhibits excellent water retention, enhancing plant hydration during freezing conditions. This coating can provide insulation, effectively shielding the plant from frost damage. The advantages of SA as a coating material, such as its biocompatibility, biodegradability, and non-toxic nature, are highlighted. Therefore, the proposed use of SA as an innovative coating material holds promise for safeguarding plants from frost damage. Following SA potential and frost's huge damage, the present review provides a comprehensive overview of the recent developments in SA-based anti-freezing hydrogels, their applications, and their potential in agriculture as anti-freezing coatings. However, further research and field trials are necessary to optimize the application methods and understand the long-term effects on productivity.
Assuntos
Alginatos , Congelamento , Hidrogéis , Alginatos/química , Alginatos/farmacologia , Hidrogéis/química , Hidrogéis/farmacologia , Plantas/químicaRESUMO
Hydrogel electrolyte is an ideal candidate material for flexible energy storage devices due to its excellent softness and conductivity properties. However, challenges such as the inherent mechanical weakness, the susceptibility to be frozen in low-temperature environments, and the insufficiency of hydrogel-electrode contact persist. Herein, a "Multi in One" strategy is employed to effectively conquer these difficulties by endowing hydrogels with high strength, freeze-resistance, and self-adhesive ability. Multiple hydrogen bond networks and ion crosslinking networks are constructed within the hydrogel electrolyte (PVA/PAAc/XG) containing polyvinyl alcohol (PVA), acrylic acid (AAc), and xanthan gum (XG), promoting the enhanced mechanical property, and the adhesion to electrode materials is also improved through abundant active groups. The introduction of zinc ions provides the material with superior frost resistance while also promoting electrical conductivity. Leveraging its multifunction of superior mechanical strength, anti-freeze property, and self-adhesive characteristic, the PVA/PAAc/XG hydrogel electrolyte is employed to fabricate zinc ion hybrid supercapacitors (ZHS). Remarkably, ZHS exhibits outstanding electrochemical performance and cycle stability. A remarkable capacity retention rate of 83.86 % after 10,000 charge-discharge cycles can be achieved at high current densities, even when the operational temperature decreases to -60 °C, showing great potential in the field of flexible energy storage devices.
Assuntos
Polissacarídeos Bacterianos , Cimentos de Resina , Zinco , Hidrogéis , Eletrólitos , ÍonsRESUMO
Conductive hydrogels are widely used as sensors in wearable devices. However, hydrogels cannot endure harsh low-temperature environments. Herein, a new regulatory system based on natural ice-structuring proteins (ISPs) and cellulose nanofibers (CNFs) is introduced into hydrogel network consisting of chemically crosslinked network of copolymerized acrylamide and 2-acrylamide-2-methylpropanesulfonic acid, and physically crosslinked polyvinyl alcohol chains, affording an anti-freezing hydrogel with high conductivity (2.63 S/m). These hydrogels show excellent adhesion behavior to various matrices (including aluminum, glass, pigskin, and plastic). Their mechanical properties are significantly improved with the increase in CNF content (tensile strength of 106.4 kPa, elastic modulus of 133.8 kPa). In addition, ISPs inhibit the growth of ice. This endows the hydrogels with anti-freezing property and allows them to maintain satisfactory mechanical properties, conductivity and sensing properties below zero degrees. Moreover, this hydrogel shows high sensitivity to tensile and compressive deformation (GF = 5.07 at 600-800 % strain). Therefore, it can be utilized to develop strain-type pressure sensors that can be attached directly to human skin for detecting various body motions accurately, reliably, and stably. This study proposes a simple strategy to improve the anti-freezing property of hydrogels, which provides new insights for developing flexible hydrogel electronic devices for application in winter sports.
Assuntos
Nanofibras , Humanos , Acrilamida , Caspase 1 , Celulose , Condutividade Elétrica , HidrogéisRESUMO
Exploring covalent triazine frameworks (CTFs) with high capacitative activity is highly desirable and challenging. Herein, the S-rich CTFs cathode is pioneeringly introduced in Zn-ion hybrid supercapacitors (ZSC), achieving outstanding capacity and energy density, and satisfactory anti-freezing flexibility. Specifically, the S-bridged CTFs are synthesized by a bifunctional template-catalytic strategy, where ZnCl2 serves as both the catalyst/solvent and in situ template to construct triazine frameworks with interconnected pores and layered gaps. The resultant CTFs (CTFS-750) are employed as a reasonable pattern-like system to more deeply scrutinize the synergistic effect of S-bridged triazine and layered porous architecture for polymer-based cathodes in Zn-ion storage. The experimental results indicate that the adsorption barriers of Zn-ions on CTFS-750 are effectively weakened, and accessible Zn2+-absorption sites provided by the CâSâC and CâN bonds have been confirmed via DFT calculations. Consequently, the CTFS-750 cathode-assembled ZSC displays an ultra-high capacity of 211.6 mAh g-1 at 1.0 A g-1, an outstanding energy density of 202.7 Wh kg-1, and attractive cycling performance. Moreover, the resulting flexible ZSC device shows superior capacity, good adaptability, and satisfactory anti-freezing behavior. This approach sheds new light on constructing advanced polymer-based cathodes at the atom level and paves the way for fabricating high-performance ZSC and beyond.
RESUMO
The requirement for cryogenic supramolecular self-assembly of amphiphiles in subzero environments is a challenging topic. Here, the self-assembly of lamellar lyotropic liquid crystals (LLCs) are presented to a subzero temperature of -70 °C. These lamellar nanostructures are assembled from specifically tailored ultra-long-chain surfactant stearyl diethanolamine (SDA) in water/glycerol binary solvent. As the temperature falls below zero, LLCs with a liquid-crystalline Lα phase, a tilted Lß phase, and a new folded configuration are obtained consecutively. A comprehensive experimental and computational study is performed to uncover the precise microstructure and formation mechanism. Both the ultra-long alkyl chain and head group of SDA play a crucial role in the formation of lamellar nanostructures. SDA head group is prone to forming hydrogen bonds with water, rather than glycerol. Glycerol cannot penetrate the lipid layer, which mixes with water arranging outside of the lipid bilayer, providing an ideal anti-freezing environment for SDA self-assembly. Based on these nanostructures and the ultra-low freezing point of the system, a series of novel cryogenic materials are created with potential applications in extremely cold environments. These findings would contribute to enriching the theory and research methodology of supramolecular self-assembly in extreme conditions and to developing novel anti-freezing materials.
RESUMO
To develop ecofriendly multifunctional gel materials for sustainable flexible electronic devices, composite organohydrogels of gellan gum (GG) and polypyrrole (PPy) with an interpenetrating network structure (IPN-GG/PPy organohydrogels) were developed first time, through fabrication of GG organohydrogels followed by in-situ oxidation polymerization of pyrrole inside. Combination of water with glycerol can not only impart environment-stability to GG hydrogels but promote the mechanics remarkably, with the compressive strength amplified by 1250 % from 0.02 to 0.27 MPa. Incorporation of PPy confers electrical conductivity to the GG organohydrogel as well as promoting the mechanical performance further. The maximum conductivity of the IPN-GG/PPy organohydrogels reached 1.2 mS/cm at 25 °C, and retained at 0.6 mS/cm under -20 °C and 0.56 mS/cm after 7 days' exposure in 25 °C and 60 % RH. The compression strength of that with the maximum conductivity increases by 170 % from 0.27 to 0.73 MPa. The excellent conductivity and mechanical properties endow the IPN-GG/PPy organohydrogels good piezoresistive strain/pressure sensing behavior. Moreover, the thermo-reversible GG network bestows them shape-memory capability. The multifunctionality and intrinsic eco-friendliness is favorable for sustainable application in fields such as flexible electronics, soft robotics and artificial intelligence, competent in motion recognition, physiological signal monitoring, intelligent actuation.
Assuntos
Inteligência Artificial , Polímeros , Polissacarídeos Bacterianos , Pirróis , Condutividade Elétrica , Hidrogéis , Tempo (Meteorologia)RESUMO
Hydrogels are widely applied in the flexible wearable electronic devices field owing to their skin-like stretchability, superb biocompatibility, and high conductivity retention under mechanical deformations. Nevertheless, hydrogels are prone to freezing at low temperatures and losing water at high temperatures, which seriously limits their practical applications. Herein, a binary solvent system of ionic liquid (1-ethyl-3-methylimidazolium chloride) and water was prepared to endow the ionic hydrogel high ionic conductivity (0.28 S m-1 at 25 °C), high transparency (94.26%), and superior freezing tolerance (-50 °C). The multiple hydrogen bonds formed among polymer chains, water, and ionic liquids significantly improved the mechanical properties of the ionic hydrogel, enabling excellent tensile properties (strain >1800%) and durability (1000 times at 100% strain). Moreover, the ionic hydrogel was further assembled into a dual-response sensor, which exhibited satisfactory sensitivity to both tension (gauge factor = 2.15 at 200% strain) and temperature (temperature coefficient of resistance = -1.845%/°C) and can be applied for human motion and body temperature monitoring. This study provides a versatile method for preparing multifunctional hydrogels with a wide range of applications and lays the groundwork for human movement detection and smart health care.
RESUMO
Carbohydrate is one kind of the most important additives in the production of surimi and surimi products, mainly due to its wide range of sources and superior functionality. In recent years, new carbohydrates (oligosaccharides and polysaccharides) have been gradually applied in the production of surimi and surimi products which is mainly driven by consumer requirement on nutritional and the flavors or taste quality and producer requirement on extending the shelf life, like low calorie intake, dietary fiber enrichment, rich taste and improvement of antioxidant properties. Besides anti-freezing and improvement in gelling ability, novel functionalities have been explored such as fat substitution, improving flavor, antibacterial effect, antioxidant effect and improving three-dimensional printability. With an in-depth study of the mechanism of carbohydrate improving the qualities of surimi and surimi products, the application of carbohydrates in surimi would be more effective. Therefore, this review summarizes the new carbohydrates applied in the processing of surimi and surimi products, and their novel functionalities. Additionally, progress of the research on the mechanism of carbohydrate improving the qualities of surimi is also reviewed. © 2023 Society of Chemical Industry.
Assuntos
Antibacterianos , Antioxidantes , Géis/química , Carboidratos , Produtos Pesqueiros/análiseRESUMO
Heteroatom-doped layered porous carbons are recently regarded as promising electrode materials for high energy density supercapacitors because they can integrate high-level heteroatom-doping and layered nano-space together to provide huge pseudocapacitive reaction areas and accelerate ion diffusion/transport. Herein, an innovative strategy is reported to prepare N/B/O co-doped layered porous carbons via ammonium folate-reinforced self-assembly of gelatin and boric acid followed by carbonization. Biomass-derived ammonium folate not only acts as an N-riched precursor but also can fasten in the process of self-assembly via boric acid-assisted electrostatic adsorption and hydrogen bonding to promote the formation of stable 3D cross-linked networks, resulting in the obtained N/B/O co-doped layered porous carbon (BNLC-850) has a large specific surface area (1822 m2 g-1 ), hierarchical porous structure and super-high heteroatom contents (N, 12.65; B, 5.67; and O, 13.84 at.%). The BNLC-850 achieves an ultrahigh specific capacitance of 525.2 F g-1 in the alkaline electrolyte at 0.5 A g-1 , meanwhile, DFT calculations reveal that the high-level N/B/O-doping can effectively weaken the adsorption barriers of K-ions. Moreover, the BNLC-850 assembles anti-freezing flexible solid-state supercapacitors in MPEI-TF-IL gel polymer electrolyte deliver a high energy density of 41.2 Wh kg-1 , excellent flexibility, and long cycle-life at -20 °C.
RESUMO
Lignocellulosic nanofibril (LCNF) is indispensable in numerous potential applications because of its unsurpassed quintessential characteristics. While it still remains a challenge to assemble LCNF in a facile and environmental economy-first manner. In this work, a simple and green one-step synthetic approach was reported to prepare a series of LCNF-containing versatile hydrogels using deep eutectic solvent (DES). In particular, the LCNF5% hydrogel (namely LCNF5%-gel) in this work perfectly integrated superior stretchability (â¼643 %), and displayed a dramatically improved anti-swelling ability (25 %) compared to the control sample (neat DES hydrogel, 2252 %). Simultaneously, the LCNF5% hydrogel presented underwater adhesiveness and outstanding long-term low-temperature resistance (stable at -25 °C for a month). This novel multifunctional hydrogel, prepared by a facile and eco-friendly strategy, is potentially useful in wet adhesion or underwater applications.