Host heterogeneity in humoral bactericidal activity can be complement independent.

Background: Humoral bactericidal activity was first recognized nearly a century ago. However, the extent of inter-individual heterogeneity and the mechanisms underlying such heterogeneity beyond antibody or complement systems have not been well studied. Methods: The plasma bactericidal activity of five healthy volunteers were tested against 30 strains of Gram-negative uropathogens, Klebsiella pneumoniae and Escherichia coli, associated with bloodstream infections. IgG and IgM titers specific to K. pneumoniae strains KP13883 and KPB1 were measured by ELISA, and complement inhibitor was used to measure the contribution of complement-induced killing. Furthermore, MALDI-TOF mass spectrometry was conducted to determine the metabolomic components of plasma with bactericidal properties in 25 healthy individuals using Bayesian inference of Pearson correlation between peak intensity and colony counts of surviving bacteria. Results: Plasma bactericidal activity varied widely between individuals against various bacterial strains. While individual plasma with higher IgM titers specific to K. pneumoniae strain KP13883 showed more efficient killing of the strain, both IgM and IgG titers for K. pneumoniae strain KPB1 did not correlate well with the killing activity. Complement inhibition assays elucidated that the complement-mediated killing was not responsible for the inter-individual heterogeneity in either isolate. Subsequently, using MALDI-TOF mass spectrometry on plasmas of 25 healthy individuals, we identified several small molecules including gangliosides, pediocins, or saponins as candidates that showed negative correlation between peak intensities and colony forming units of the test bacteria. Conclusion: This is the first study to demonstrate the inter-individual heterogeneity of constitutive innate humoral bactericidal function quantitatively and that the heterogeneity can be independent of antibody or the complement system.

2-Aryl-Benzoimidazoles as Type II NADH Dehydrogenase Inhibitors of Mycobacterium tuberculosis.

The nonproton pumping type II NADH dehydrogenase in Mycobacterium tuberculosis is essential for meeting the energy needs in terms of ATP under normal aerobic and stressful hypoxic environmental states. Type II NADH dehydrogenase conduits electrons into the electron transport chain in Mycobacterium tuberculosis, which results in ATP synthesis. Therefore, the inhibition of NDH-2 ensures the abolishment of the entire ATP synthesis machinery. Also, type II NADH dehydrogenase is absent in the mammalian genome, thus making it a potential target for antituberculosis drug discovery. Herein, we have screened a commercially available library of drug-like molecules and have identified a hit having a benzimidazole core moiety (6, H37Rv mc26230; minimum inhibitory concentration (MIC) = 16 µg/mL and ATP IC50 = 0.23 µg/mL) interfering with the oxidative phosphorylation pathway. Extensive medicinal chemistry optimization resulted in analogue 8, with MIC = 4 µg/mL and ATP IC50 = 0.05 µg/mL against the H37Rv mc26230 strain of Mycobacterium tuberculosis. Compounds 6 and 8 were found to be active against mono- and multidrug-resistant mycobacterium strains and demonstrated a bactericidal response. The Peredox-mCherry experiment and identification of single-nucleotide polymorphisms in mutants of CBR-5992 (a known type II NADH dehydrogenase inhibitor) were used to confirm the molecules as inhibitors of the type II NADH dehydrogenase enzyme. The safety index >10 for the test active molecules revealed the safety of test molecules.

Rooted in therapeutics: comprehensive analyses of Cannabis sativa root extracts reveals potent antioxidant, anti-inflammatory, and bactericidal properties.

Following the legalization of recreational Cannabis in Canada in 2018, the associated waste, including Cannabis roots, has significantly increased. Cannabis roots, comprising 30%-50% of the total plant, are often discarded despite their historical use in Ayurvedic medicine for treating inflammatory and infectious disorders. This study evaluates the phytochemical and therapeutic properties of Cannabis root extracts from a high tetrahydrocannabinolic acid, low cannabidiolic acid cultivar (variety Alien Gorilla Glue). We performed ultra high-performance liquid chromatography coupled with mass spectrometry (UPLC-QTOF-MS) to identify the chemical components of the Cannabis roots. Extracts using water, ethanol and acid-base solvents were tested for antioxidant activity through free radical scavenging, metal chelation, and lipoperoxidation inhibition assays. Mitochondrial membrane protection was assessed using flow cytometry with the MitoPerOx probe in THP-1 monocytic leukemia cells. Anti-inflammatory potential was evaluated by measuring interleukin-6 levels in lipopolysaccharide-stimulated THP-1 cells. Bactericidal/fungicidal efficacy against Escherichia coli, Staphylococcus aureus, and Candida albicans was determined using the p-iodonitrophenyltetrazolium assay. Additionally, we investigated the anticholinesterase activity of Cannabis root extracts, given the potential role of plant alkaloids in inhibiting cholinesterase, an enzyme targeted in Alzheimer's disease treatments. UPLC-QTOF-MS analysis suggested the presence of several phenolic compounds, cannabinoids, terpenoids, amino acids, and nitrogen-containing compounds. Our results indicated significant antioxidant, bactericidal, and anticholinesterase properties of Cannabis root extracts from both soil and hydroponic cultivation. Extracts showed strong antioxidant activity across multiple assays, protected mitochondrial membrane in THP-1 cells, and exhibited anti-inflammatory and bactericidal/fungicidal efficacy. Notably, soil-cultivated roots displayed superior anti-inflammatory effects. These findings demonstrate the remarkable antioxidant, anti-inflammatory, and anti-microbial activities of Cannabis roots, supporting their traditional uses and challenging their perception as mere waste. This study highlights the therapeutic potential of Cannabis roots extracts and suggests avenues for further research and application.

Lag Plot: A Novel Method to Determine Viable Bacterial Cell Number via a Single OD Measurement.

Bactericidal activity is a valuable parameter which is considered and measured for antimicrobial compounds. The available standard protocol to evaluate bactericidal activity is based on the direct colony count. Colony counting requires serial dilution, plating, overnight incubation, and direct counting, which is time-and labor-intensive. In regard to eliminate direct plate count, novel techniques were developed based on the real-time growth monitoring which can come with some limitations and drawbacks. These drawbacks encourage us to develop a novel technique with simple procedure to determine viable bacterial cell count. In this procedure, real-time growth monitoring is not required. In fact, after an incubation time, the number of viable bacteria can be determined with a single OD measurement and through an equation. In this regard, four standard bacterial strains, including Staphylococcus aureus (ATCC 25923), Escherichia coli (ATCC 25922), Pseudomonas aeruginosa (ATCC 27853), and Bacillus subtilis (ATCC 23857), were cultured with descending inoculum densities (1.5 × 107 to 15 CFU/mL) and growth curves were drawn. As expected, growth in the samples with lower inoculum densities recorded with longer lag phase. Also, a direct relation was observed between the recorded turbidities and initial cell counts. A logarithmic curve (lag plot) was obtained by plotting the OD, after 12-18 h incubation, against initial cell counts. In all examined strains, R2 was calculated in the range of 0.96-0.99 which is acceptable value for coefficient of determination. Equation corresponding to the lag plot was obtained and called lag equation. This equation is applicable to calculate the number of viable cells in unknown samples simply by inoculation, incubation, and single OD measurement. Developed technique can be introduced as a simple substitution for labor- and time-intensive direct colony counting.

Secapin: a promising antimicrobial peptide against multidrug-resistant Acinetobacter baumannii.

Introduction: Acinetobacter baumannii, renowned for its exceptional multidrug resistance and its role as a prevalent nosocomial pathogen, poses a formidable challenge to conventional antibiotic therapies. The primary objective of this investigation was to evaluate the efficacy of Secapin, an antimicrobial peptide, against multidrug-resistant (MDR) baumannii. Furthermore, the mechanisms underlying Secapin's antibacterial and antibiofilm activities were elucidated. Methods: The antimicrobial and antibiofilm effectiveness of Secapin against MDR A. baumannii was assessed through a series of experiments. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of Secapin were determined using established protocols. Time-kill kinetic analysis was performed to assess the concentration-dependent bactericidal effect of Secapin. Additionally, the capacity of Secapin to impede biofilm formation and eradicate A. b aumannii biofilms was investigated. Hemolytic potential was evaluated using human red blood cells, while mammalian cell viability was examined at varying Secapin concentrations. Results: Secapin exhibited robust bactericidal activity at minimal concentrations, with an MIC of 5 µg/mL and an MBC of 10 µg/mL against MDR A. baumannii. The time-kill kinetic analysis confirmed the concentration-dependent efficacy of Secapin in diminishing bacterial viability. Moreover, Secapin demonstrated the ability to prevent biofilm formation and eliminate established A. baumannii biofilms. Notably, Secapin exhibited no hemolytic activity and preserved mammalian cell viability up to a concentration of 100 µg/mL. Conclusion: These findings underscore the substantial potential of Secapin as a potent agent against multidrug-resistant A. baumannii, showcasing its efficacy in both antibacterial and antibiofilm capacities. The favorable attributes of Secapin, characterized by its minimal hemolytic effects and high mammalian cell viability, position it as a promising contender in the fight against antibiotic resistance.

Early prediction of the bactericidal and bacteriostatic effect of imipenem and doxycycline using tabletop scanning electron microscopy.

Introduction: Our work aims at establishing a proof-of-concept for a method that allows the early prediction of the bactericidal and bacteriostatic effects of antibiotics on bacteria using scanning electron microscopy (SEM) as compared to traditional culture-based methods. Methods: We tested these effects using Imipenem (bactericidal) and Doxycycline (bacteriostatic) with several strains of sensitive and resistant Escherichia coli. We developed a SEM-based predictive score based on three main criteria: Bacterial Density, Morphology/Ultrastructure, and Viability. We determined the results for each of these criteria using SEM micrographs taken with the TM4000Plus II-Tabletop-SEM (Hitachi, Japan) following an optimized, rapid, and automated acquisition and analysis protocol. We compared our method with the traditional culture colony counting gold standard method and classic definitions of the two effects. Results: Our method revealed total agreement with the CFU method and classic definition by visualizing the effect of the antibiotic at 60 minutes and 120 minutes using SEM. Discussion: This early prediction allows a rapid and early identification of the bactericidal and bacteriostatic effects as compared to culture that would take a minimum of 18 hours. This has several future applications in the development of SEM-automated assays coupled to machine learning models that identify the antibiotic effect and facilitate determination of bacterial susceptibility.

Comparative evaluation of minimal inhibitory concentration and minimal bactericidal concentration of various herbal irrigants against Enterococcus faecalis.

Context: The purpose of this article is to evaluate the minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) of Herbal Irrigants. Aim: The aim of the study was to evaluate MIC and MBC of herbal extracts of Azadirachta indica, Curcuma longa, and Green Tea Against Enterococcus faecalis. Methodology: The MIC and MBC of extracts of A . indica (neem), C. longa (turmeric), and Green Tea were evaluated to establish them as standard root canal irrigants against E. faecalis using agar well diffusion method. Statistical Analysis Used: The collected data were statistically analyzed using the Statistical Package for the Social Sciences (SPSS) software. Results: The present study found that green tea exhibited the most substantial antimicrobial activity among the tested herbal extracts, which was comparable to chlorhexidine. Although A. indica and C. longa required higher concentrations for effectiveness, their antimicrobial properties were also apparent. Conclusions: Within the constraints of this study, it can be concluded that green tea could be considered a promising alternative to chlorhexidine in treating endodontic infections due to its substantial antimicrobial activity against E. faecalis at lower concentrations.

Optimized Incorporation of Silver Nanoparticles onto Cotton Fabric Using k-Carrageenan Coatings for Enhanced Antimicrobial Properties.

The incorporation of bactericidal properties into textiles is a widely sought-after aspect, and silver nanoparticles (AgNPs) can be used for this. Here, we evaluate a strategy for incorporating AgNPs into a cotton fabric. For this purpose, a bactericidal textile coating based on a composite of AgNPs and kappa-carrageenan (k-CA) was proposed. The composite was obtained by heating the silver precursor (AgNO3) directly in k-CA solution for green synthesis and in situ AgNPs stabilization. Cotton substrates were added to the heated composite solution for surface impregnation and hydrogel film formation after cooling. Direct synthesis of AgNPs on a fabric was also tested. The results showed that the application of a coating based on k-CA/AgNPs composite can achieve more than twice the silver loading on the fabric surface compared to the textile subjected to direct AgNPs incorporation. Furthermore, silver release tests in water showed that higher Ag+ levels were reached for k-CA/AgNPs-coated cotton. Therefore, inoculation tests with the bacteria Staphylococcus aureus (SA) using the agar diffusion method showed that samples covered with the composite resulted in significantly larger inhibition halos. This indicated that the use of the composite as a coating for cotton fabric improved its bactericidal activity against SA.

Assessment of antioxidant and antibacterial efficacy of some indigenous vegetables consumed by the Manipuri community in Sylhet, Bangladesh.

The rapid dietary changes experienced by indigenous people worldwide threaten the use of traditional foods, which are often undervalued. This study focused on evaluating the antioxidant and antibacterial efficacy of five vegetables typically consumed by the Manipuri ethnic groups in the Sylhet region of Bangladesh: Yongchak seed (Parkia speciosa), Telikadam seed (Leucaena leucocephala), Phakphai leaf (Persicaria odorata), Sheuli leaf (Nyctanthes arbor-tristis), and bamboo shoot (Bambusa spp.). The samples were dried and powdered to assess the antioxidant activity through total phenolic content (TPC), total flavonoid content (TFC), total tannin content (TTC), and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity. Antibacterial efficacy was determined by measuring the zone of inhibition (ZOI), minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC). Leafy vegetables exhibited higher TPC, TFC, and TTC than seeds and shoots, with N. arbor-tristis leaf showing the highest TPC (99.16 ± 2.07 mg GAE/g DW) and P. odorata leaf exhibiting the highest TFC (9.19 ± 0.7 mg QE/g) and TTC (3.59 ± 0.26 mg TAE/g). However, Bambusa spp. shoot extract showed the highest antioxidant potential (IC50: 1.66 ± 0.05 mg/mL). All samples exhibited higher ZOI against gram-positive bacteria (Bacillus spp. and Staphylococcus spp.), ranging from 10 ± 2.65 to 19.33 ± 2.08 mm. L. leucocephala seed extract showed the highest antibacterial activity against both the tested gram-positive bacteria with a MIC of 15.6 mg/mL. Conversely, the P. odorata leaf extract exerted the strongest antibacterial effect against gram-negative bacteria, with the lowest MIC values for Klebsiella spp. (31.25 mg/mL) and Escheria coli (62.5 mg/mL). The findings of this investigation suggest that the selected indigenous vegetables could be valuable sources of phytochemicals with potential antioxidant and antibacterial activities. Incorporating and promoting these traditional foods into the diet may improve food security, dietary diversity, and public health in Bangladesh.

Surface carcass treatment with olive mill wastewater polyphenolic extract against Salmonella Enteritidis and Listeria monocytogenes: in vitro and in situ assessment.

In recent years, there has been an increased interest in substances that could inhibit or reduce microbial growth in food products. Olive oil industry by-products, due to bioactive compounds with potential antimicrobial properties such as polyphenols, could be used in carcass treatment to enhance hygienic and quality traits. The assessment of the antimicrobial efficacy of bioactive molecules against pathogens should be determined with in vitro and in situ models since it is not possible to evaluate it directly on carcasses at the slaughterhouse. This study aimed to evaluate the effect of an olive mill wastewater polyphenolic extract against Salmonella Enteritidis and Listeria monocytogenes, simulating carcass surfaces using bovine dermis samples that were experimentally contaminated with the selected pathogens. The minimum inhibitory concentration and minimum bactericidal concentration were first determined for S. Enteritidis and L. monocytogenes. In situ, bactericidal activity assessment was performed using 20 cm2 derma samples contaminated with 5 Log CFU/20 cm2 of S. Enteritidis and L. monocytogenes in separate trials. Treatment with the polyphenolic extract was not effective for either microorganism. In order to establish the bacteriostatic activity of the polyphenolic extract, suspensions of about 2 Log CFU/20 cm2 of S. Enteritidis and L. monocytogenes were used. Polyphenolic extract treatment was not effective against Salmonella, while for Listeria it allowed microbial growth to delay (around 1 Log CFU/cm2 difference at 3, 7, and 14 days between treated and control groups). Further investigations are needed to evaluate the application of polyphenolic compounds on carcass surfaces and their effects on sensory traits.

Biomedical applications of chitosan-coated phytogenic silver nanoparticles: An alternative drug to foodborne pathogens.

The biogenic synthesis of silver nanoparticles (AgNPs) was performed using crude rosmarinic acid (RA) from plants as a reducing agent and coated with chitosan biopolymer. The prepared particles were characterized by ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). A surface plasmon resonance peak at 430 nm indicates the emergence of AgNPs. XRD showed that the AgNPs were crystalline with an average crystalline size of 30 nm and TEM studies revelad that AgNPs were spherical without aggregation. The prepared CS-AgNPs exhibited good bactericidal properties against foodborne pathogens, such as Escherichia coli, Pseudomonas aeruginosa, and Vibrio parahaemolyticus. In particular, 100 µg/mL CS-AgNPs inhibited the growth of the selected bacteria and controlled their biofilm-forming ability. Band-aid cloth assay confirmed that the CS-AgNPs could be used in the medical field to prevent bacterial infections. The prepared CS-AgNPs increased the survival rate of Artemia species and exhibited antioxidant activity in conjunction with bactericidal properties against selected foodborne pathogens.

Phyto-assisted synthesis of zinc oxide nanoparticles using Bauhinia variegata buds extract and evaluation of their multi-faceted biological potentials.

Zinc oxide nanoparticles have wide range biological, biomedical and environmental applications. However, traditional nanofabrication of ZnONPs uses various toxic chemicals and organic solvents which limit their bio-applications. To overcome this hurdle, Bauhinia variegata derived buds extract was utilized to fabricate ZnONPs. The greenly generated ZnONPs were successfully prepared and extensively characterized using different analytical tools and the average crystalline size was calculated as 25.47 nm. Further, bioengineered ZnONPs were explored for multiple biological activities that revealed excellent therapeutic potentials. The antibacterial potential was determined using different bacterial strains. Pseudomonas aeruginosa (MIC: 137.5 µg/mL) was reported to be the most resistant variant while Bacillus subtilis (MIC: 34.38 µg/mL) was observed to be most susceptible bacterial strain. DPPH radical scavenging potential was measured to determine the antioxidant capacity of ZnONPs and the highest scavenging potential was observed as 82% at highest of 300 µg/mL. The fungicidal effect of green ZnONPs in comparison with Amphotericin B was assessed against five selected pathogenic fungal strains. The results revealed, Fusarium solani (MIC: 46.875 µg/mL) was least resistant and Aspergillus flavus (MIC: 187.5 µg/mL) was most resistant in fungicidal examination. Cytotoxicity potential of B.V@ZnONPs was analyzed against newly hatched nauplii of brine shrimps. The results for greenly produced ZnONPs was recorded as 39.78 µg/mL while 3.006 µg/mL was reported for positive control vincristine sulphate. The results confirmed the category of general cytotoxic for greenly synthesized nano sized B.V@ZnONPs.

8-Hydroxyquinoline Series Exerts Bactericidal Activity against Mycobacterium tuberculosis Via Copper-Mediated Toxicity.

New drugs and mechanisms of action targeting Mycobacterium tuberculosis are urgently needed to solve the global pandemic of tuberculosis. We previously demonstrated that the 8-hydroxyquinoline series has rapid bactericidal activity against M. tuberculosis. In this work, we determined that the activity of the 8HQ series is potentiated by copper ions and that the activity is dependent on copper since activity was reduced when copper was depleted from the medium. We determined that exposure to 8HQs led to an increase in intracellular copper. The increase in copper ions was specific since we saw no changes for other metal cations (zinc, iron, magnesium, manganese, or calcium). We observed the transient generation of reactive oxygen species after 8HQ exposure which disappeared by 24 h. Inhibition of growth could be partially relieved by scavenging hydroxyl radicals. We excluded the possibility that 8HQs are toxic by DNA intercalation. We screened a panel of hypomorph strains and identified sensitized strains. The pattern of sensitized strains did not suggest a specific target, but metalloenzymes, proteins with Fe-S clusters, and cell envelope biosynthetic enzymes were highlighted. These data suggest that 8HQs do not have a specific intracellular target, but act as copper ionophores, and that the mode of action is via copper-dependent toxicity.

A Comprehensive Review of Silver and Gold Nanoparticles as Effective Antibacterial Agents.

The increasing threat from antibiotic-resistant bacteria has necessitated the development of novel methods to counter bacterial infections. In this context, the application of metallic nanoparticles (NPs), especially gold (Au) and silver (Ag), has emerged as a promising strategy due to their remarkable antibacterial properties. This review examines research published between 2006 and 2023, focusing on leading journals in nanotechnology, materials science, and biomedical research. The primary applications explored are the efficacy of Ag and Au NPs as antibacterial agents, their synthesis methods, morphological properties, and mechanisms of action. An extensive review of the literature on NPs synthesis, morphology, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and effectiveness against various Gram(+/-) bacteria confirms the antibacterial efficacy of Au and Ag NPs. The synthesis methods and characteristics of NPs, such as size, shape, and surface charge, are crucial in determining their antibacterial activity, as these factors influence their interactions with bacterial cells. Furthermore, this review underscores the urgent necessity of standardizing synthesis techniques, MICs, and reporting protocols to enhance the comparability and reproducibility of future studies. Standardization is essential for ensuring the reliability of research findings and accelerating the clinical application of NP-based antimicrobial approaches. This review aims to propel NP-based antimicrobial strategies by elucidating the properties that enhance the antibacterial activity of Ag and Au NPs. By highlighting their inhibitory effects against various bacterial strains and relatively low cytotoxicity, this work positions Ag and Au NPs as promising materials for developing antibacterial agents, making a significant contribution to global efforts to combat antibiotic-resistant pathogens.

Evaluation of antibacterial activity on nanoline-array surfaces with different spacing.

Extensive research has been conducted on anti-biofouling or antibacterial surfaces, with nanostructured surfaces that mimic cicada and dragonfly wings emerging as promising candidates for mechano-bactericidal applications. These biomimetic nanostructured surfaces are capable of exerting a bactericidal effect by directly damaging the membranes of bacteria attached to nanostructures. Although research on bactericidal effect using various nanostructures have been conducted, no specific studies have yet reported on the antibacterial efficiency of the surface having nanoline array, especially regarding the spacing between nanolines. This study details the fabrication of nanoline array via ultraviolet (UV) molding with polyurethane acrylate (PUA), noted for its UV sensitivity and rapid curing, enabling the fabrication of precise and scalable nanoscale structures. Investigation into the nanoline array's antibacterial effects against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) reveals that nanoline spacing critically influences bacterial adherence and viability, with specific spacings enhancing antibacterial properties. Scanning electron microscopy (SEM) and confocal microscopy analyses show that surface topography significantly affects bacterial behavior, with specific spacings leading to varied bacterial responses, including membrane damage and altered attachment patterns. The study highlights the potential of nanoline array in fabricating surfaces with tailored antibacterial properties, emphasizing the importance of nanoscale design in influencing bacterial interaction and viability. We also confirm the relative mechanical rigidity of the nanoline array, which exhibits antibacterial effects, through both experimental observations and numerical analysis. This indicates our proposed nanoline-array surface could have potential future applications in mechanical anti-bacterial functions that require such structural robustness.

Antimicrobial activity of compounds identified by artificial intelligence discovery engine targeting enzymes involved in Neisseria gonorrhoeae peptidoglycan metabolism.

BACKGROUND: Neisseria gonorrhoeae (Ng) causes the sexually transmitted disease gonorrhoea. There are no vaccines and infections are treated principally with antibiotics. However, gonococci rapidly develop resistance to every antibiotic class used and there is a need for developing new antimicrobial treatments. In this study we focused on two gonococcal enzymes as potential antimicrobial targets, namely the serine protease L,D-carboxypeptidase LdcA (NgO1274/NEIS1546) and the lytic transglycosylase LtgD (NgO0626/NEIS1212). To identify compounds that could interact with these enzymes as potential antimicrobials, we used the AtomNet virtual high-throughput screening technology. We then did a computational modelling study to examine the interactions of the most bioactive compounds with their target enzymes. The identified compounds were tested against gonococci to determine minimum inhibitory and bactericidal concentrations (MIC/MBC), specificity, and compound toxicity in vitro. RESULTS: AtomNet identified 74 compounds that could potentially interact with Ng-LdcA and 84 compounds that could potentially interact with Ng-LtgD. Through MIC and MBC assays, we selected the three best performing compounds for both enzymes. Compound 16 was the most active against Ng-LdcA, with a MIC50 value < 1.56 µM and MBC50/90 values between 0.195 and 0.39 µM. In general, the Ng-LdcA compounds showed higher activity than the compounds directed against Ng-LtgD, of which compound 45 had MIC50 values of 1.56-3.125 µM and MBC50/90 values between 3.125 and 6.25 µM. The compounds were specific for gonococci and did not kill other bacteria. They were also non-toxic for human conjunctival epithelial cells as judged by a resazurin assay. To support our biological data, in-depth computational modelling study detailed the interactions of the compounds with their target enzymes. Protein models were generated in silico and validated, the active binding sites and amino acids involved elucidated, and the interactions of the compounds interacting with the enzymes visualised through molecular docking and Molecular Dynamics Simulations for 50 ns and Molecular Mechanics Poisson-Boltzmann Surface Area (MM-PBSA). CONCLUSIONS: We have identified bioactive compounds that appear to target the N. gonorrhoeae LdcA and LtgD enzymes. By using a reductionist approach involving biological and computational data, we propose that compound Ng-LdcA-16 and Ng-LtgD-45 are promising anti-gonococcal compounds for further development.

Cyclization increases bactericidal activity of arginine-rich cationic cell-penetrating peptide for Neisseria gonorrhoeae.

We previously reported that a linear cationic 12-amino acid cell-penetrating peptide (CPP) was bactericidal for Neisseria gonorrhoeae. In this study, our objectives were to determine the effect of cyclization of the linear CPP on its antibacterial activity for N. gonorrhoeae and cytotoxicity for human cells. We compared the bactericidal effect of 4-hour treatment with the linear CPP to that of CPPs cyclized by a thioether or a disulfide bond on human challenge and multi-drug resistant (MDR) strains of N. gonorrhoeae grown in cell culture media with 10% fetal bovine serum (FBS). The effect of lipooligosaccharide (LOS) sialylation on bactericidal activity was analyzed. We determined the ability of the CPPs to treat human cells infected in vitro with N. gonorrhoeae, to reduce the inflammatory response of human monocytic cells to gonococci, to kill strains of three commensal Neisseria species, and to inhibit gonococcal biofilms. The cyclized CPPs killed 100% of gonococci from all strains at 100 µM and >90% at 20 µM and were more potent than the linear form. The thioether-linked but not the disulfide-linked CPP was less cytotoxic for human cervical cells compared to the linear CPP. LOS sialylation had minimal effect on bactericidal activity. In treating infected human cells, the thioether-linked CPP at 20 µM killed >60% of extra- and intracellular bacteria and reduced TNF-α expression by THP-1 cells. The potency of the CPPs for the pathogenic and the commensal Neisseria was similar. The thioether-linked CPP partially eradicated gonococcal biofilms. Future studies will focus on determining efficacy in the female mouse model of gonorrhea.IMPORTANCENeisseria gonorrhoeae remains a major cause of sexually transmitted infections with 82 million cases worldwide in 2020, and 710,151 confirmed cases in the US in 2021, up 25% from 2017. N. gonorrhoeae can infect multiple tissues including the urethra, cervix, rectum, pharynx, and conjunctiva. The most serious sequelae are suffered by infected women as gonococci ascend to the upper reproductive tract and cause pelvic inflammatory disease, chronic pelvic pain, and infertility in 10%-20% of women. Control of gonococcal infection is widely recognized as increasingly challenging due to the lack of any vaccine. N. gonorrhoeae has quickly developed resistance to all but one class of antibiotics and the emergence of multidrug-resistant strains could result in untreatable infections. As such, gonorrhea is classified by the Center for Disease Control (CDC) as an urgent public health threat. The research presented herein on new therapeutics for gonorrhea has identified a cyclic cell-penetrating peptide (CPP) as a potent molecule targeting N. gonorrhoeae.

Antimicrobial Activity of ZnS and ZnO-TOP Nanoparticles Againts Pathogenic Bacteria.

This study aims to synthesize ZnS nanoparticles (NPs) and investigate their biocidal effects, along with those of ZnO-Trioctylphosphine (ZnO-TOP) NPs, on various pathogenic microbes. The NPs were synthesized via the polyol method using the forced hydrolysis of zinc acetate. They were characterized by XRD and TEM. The average sizes of ZnS and ZnO-TOP are 3.63 nm and 16.28 nm, respectively. The antimicrobial activities were assessed using agar-well diffusion, minimum inhibitory concentration (MIC), and biofilm inhibition. The results showed that ZnS and ZnO-TOP NPs have potent antimicrobial activity against all tested pathogen microbes. A zone of maximum inhibition (ZMI) of 20±0.54 and 22±0.26 was observed in the case of ZnS for Acinetobacter baumannii and Candida albicans, respectively. For ZnO-TOP, a ZMI of 20±0.15 and 20±0.19 is obtained for Pseudomonas. aeruginosa ATCC 27853 and A. baumannii, respectively. Percentages of biofilm inhibition at 128 µg/ml were notably high for Enterococcus faecalis (96.83% with ZnO-TOP and 91.17% with ZnS) and Staphylococcus aureus (87.27% with ZnO-TOP and 76.37% with ZnS). The results suggest that ZnS and ZnO-TOP nanoparticles have promising potential as effective antimicrobial agents, especially against biofilm-forming pathogens, indicating their potential for future use in treating microbial infections.

Physical, mechanical and antibacterial properties of the orthodontic adhesive doped with S-TiO2.

Orthodontic adhesive doped with sulfur-modified TiO2 promotes antibacterial effect. The objective of the study was to characterize the physical, mechanical and antibacterial properties of the orthodontic bracket adhesive, doped with modified titanium dioxide nanoparticles. Sulfur-doped TiO2 was synthetized and morphological topography was analyzed with TEM and SEM imaging. The catalytic performance during the degradation of rhodamine B was assessed. Nanomaterial was added at four concentration (1, 3, 6, and 10 wt%) to a commercial orthodontic adhesive. The shear bond strength and microhardness of a resin-based orthodontic adhesive containing S-TiO2 were evaluated. The inhibitory effect of the pure and doped adhesives against Escherichia coli and Streptococcus mutans was examined. As the results, the highest antimicrobial activity and good adhesive properties were noticed for light-cured orthodontic adhesive doped with 3% of S-TiO2. In this case, orthodontic adhesives with strong and long-lasting bactericidal properties can be created through the incorporation of modified TiO2 without negatively influencing microhardnesses, and bonding ability. White spot lesion and demineralization, which occurs very often in patients during orthodontic treatment, can be therefore minimized.

On-demand bactericidal and self-adaptive antifouling hydrogels for self-healing and lubricant coatings of catheters.

Catheter-related infections are one of the most common nosocomial infections with increasing morbidity and mortality, and robust antibacterial or antifouling catheter coatings remain great challenges for long-term implantation. Herein, multifunctional hydrogel coatings were developed to provide persistent and self-adaptive antifouling and antibacterial effects with self-healing and lubricant capabilities. Polyvinyl alcohol (PVA) with ß-cyclodextrin (ß-CD) grafts (PVA-Cd) and 4-arm polyethylene glycol (PEG) with adamantane and quaternary ammonium compound (QAC) terminals (QA-PEG-Ad) were crosslinked through host-guest recognitions between adamantane and ß-CD moieties to acquire PVEQ coatings. In response to bacterial infections, QACs exhibit reversible transformation between zwitterions (pH 7.4) and cationic lactones (pH 5.5) to generate on-demand bactericidal effect. Highly hydrophilic PEG/PVA backbones and zwitterionic QACs build a lubricate surface and decrease the friction coefficient 10 times compared with that of bare catheters. The antifouling hydrated layer significantly inhibits blood protein adsorption and platelet activation and reveals negligible hemolysis and cytotoxicity. The dynamic host-guest crosslinking achieves full self-healing of cracks in PVEQ hydrogels, and the mechanical profiles were recovered to over 90 % after rejuvenating the broken hydrogels, exhibiting a long-term stability after mechanical stretching, twisting, knotting and compression. After subcutaneous implantation and local bacterial infection, the retrieved PVEQ-coated catheters display no tissue adhesion and 3 log folds lower bacterial number than that of bare catheters. PVEQ coatings effectively prevent the repeated bacterial infections and there are few inflammatory reactions in the surrounding tissue, while substantial lymphoid infiltration and inflammatory cell aggregation occur in muscle tissues around the bare catheter. Thus, this study demonstrates a catheter coating strategy by on-demand bactericidal, self-adaptive antifouling, self-healing and lubricant hydrogels to address medical devices-related infections. STATEMENT OF SIGNIFICANCE: It is estimated over two billion peripheral intravenous catheters are annually used in hospitals around the world, and catheter-associated infection has become a great clinical challenge with rapidly rising morbidity and mortality. Surface coating is considered a promising approach, but substantial challenges remain in the development of coatings that simultaneously satisfy both anti-fouling and antibacterial attributes. Even more, few attempts have been made to design mechanically robust coatings and reversible antibacterial or antifouling capabilities, which are critical for long-term medical implants. To address these challenges, we propose a concise strategy to develop hydrogel coatings from commercially available poly(ethylene glycol) and polyvinyl alcohol. In addition to self-healing and lubricant capabilities, the reversible conversion between zwitterionic and cationic lactones of quaternary ammonium compounds enables on-demand bactericidal and self-adaptive antifouling effects.