Exploring long-term global environmental impacts of chlorinated paraffins (CPs) in waste: Implications for the Stockholm and Basel Conventions and the global plastic treaty.

Chlorinated paraffins (CPs), mainly short-chain CPs (SCCPs) and medium-chain CPs (MCCPs), are currently the most produced and used industrial chemicals related to persistent organic pollutants (POPs) globally. These chemicals are widely detected in the environment and in the human body. As the release of SCCPs and MCCPs from products represents only a small fraction of their stock in products, the potential long-term release of CPs from a large variety of products at the waste stage has become an issue of great concern. The results of this study showed that, by 2050, SCCPs and MCCPs used between 2000 and 2021 will cumulatively generate 226.49 Mt of CP-containing wastes, comprising 8610.13 kt of SCCPs and MCCPs. Approximately 79.72 Mt of CP-containing wastes is predicted to be generated abroad through the international trade of products using SCCPs and MCCPs. The magnitude, distribution, and growth of CP-containing wastes subject to environmentally sound disposal will depend largely on the relevant provisions of the Stockholm and Basel Conventions and the forthcoming global plastic treaty. According to multiple scenarios synthesizing the provisions of the three conventions, 26.6-101.1 Mt of CP-containing wastes will be subject to environmentally sound disposal as POP wastes, which would pose a great challenge to the waste disposal capacity of China, as well as for countries importing CP-containing products. The additional 5-year exemption period for MCCPs is expected to see an additional 10 Mt of CP-containing wastes subject to environmentally sound disposal. Thus, there is an urgent need to strengthen the Stockholm and Basel Conventions and the global plastic treaty.

An improved strategy for effectively managing the transboundary movement of waste based on the basel convention: A case study in South Korea.

Despite the efforts made to minimize the illegal trafficking of hazardous waste and prevent environmental pollution worldwide in accordance with the 1989 Basel Convention (BC), the illegal transboundary movement of waste and associated environmental pollution are ongoing. This study proposes a three-stage theoretical approach to effectively managing this waste. In stage one, the Convention, including its 2019 revisions, stipulates six primary requirements: clear declaration, hazardous waste, onsite inspection, responsibility, transport management, and final disposal after import. In stage two, the export and import management system is divided into four facets: customs preprocessing, customs processing, follow-up, and law. The challenges are presented of how to align the waste disposal with the Basel Convention's main requirements. Stage three presents a discussion of the effectiveness of the countermeasures derived in stage two for disposing of waste both within individual nations and internationally. Then, the theoretical approach was applied to analyzing South Korea Ministry of Environment's Act on the Transboundary Movement of Hazardous Waste and Their Disposal (revised in 2017). The strategy was demonstrated to be an improvement, and these study results can be foundational data to newly establish laws or revise existing acts on transboundary movement of waste (TMW) in each country.

Large Virtual Transboundary Hazardous Waste Flows: The Case of China.

The Basel Convention and prior studies mainly focused on the physical transboundary movements of hazardous waste (transporting waste from one region to another for cheaper disposal). Here, we take China, the world's largest waste producer, as an example and reveal the virtual hazardous waste flows in trade (outsourcing waste by importing waste-intensive products) by developing a multiregional input-output model. Our model characterizes the impact of international trade between China and 140 economies and China's interprovincial trade on hazardous waste generated by 161,599 Chinese enterprises. We find that, in 2015, virtual hazardous waste flows in China's trade reached 26.6 million tons (67% of the national total), of which 31% were generated during the production of goods that were ultimately consumed abroad. Trade-related production is much dirtier than locally consumed production, generating 26% more hazardous waste per unit of GDP. Under the impact of virtual flows, 40% of the waste-intensive production and relevant disposal duty is unequally concentrated in three Chinese provinces (including two least-developed ones, Qinghai and Xinjiang). Our findings imply the importance of expanding the scope of transboundary waste regulations and provide a quantitative basis for introducing consumer responsibilities. This may help relieve waste management burdens in less-developed "waste havens".

Transboundary movement of waste review: From binary towards a contextual framing.

Multiple cases of toxic waste dumping from the Organisation for Economic Co-operation and Development (OECD) countries to non-OECD countries in the 1980s led to scholarly attention to transboundary waste movements. The Basel Convention was established to provide an international legal framework to tackle such problems in the early 1990s, focusing on hazardous waste. However, the transboundary movement of all waste, not just hazardous waste, remains a societal challenge globally, frequently surfacing as an ethical question on the one hand and a story of resource management/trade on the other. This phenomenon has been studied across disciplines resulting in diverse, scattered and often contested understandings. Despite previous and ongoing efforts, waste production, management and transboundary movements are increasing and are predicted to grow significantly with global social, environmental and economic implications. This literature review uses a research synthesis and problematisation approach to critically analyse the transboundary waste literature since 1985. The findings highlight research trends, the need for data reliability and policy coherence, and the sustainability implications of the phenomenon. One recurring theme in the literature is the reduction of the complex phenomenon involving multiple countries, policies, actors and waste streams into simple opposite narratives, which we called transboundary waste binaries. We have identified and then challenged assumptions behind transboundary waste binaries and discussed the implications of such assumptions on the broader discourse. We have concluded with future research recommendations to look past the transboundary waste binaries towards a nuanced and contextual understanding of transboundary waste flows.

Circular Economy and the Changing Geography of International Trade in Plastic Waste.

Plastic pollution has become a major environmental concern worldwide. As the circular economy is increasingly seen as a means for achieving sustainable development, it is imperative to promote the more efficient use of plastics worldwide. An integral part of the circular economy model, trade in waste, and the scrap for recovery is a part of the solution to achieve sustainability. This paper studies the changing geography of the international trade in plastic waste. It reveals increasingly complex patterns of the transboundary trade in plastic waste over more than two decades. The movement of plastic waste from high-income countries to developing nations has been the largest flow, but trade flows of other directions turn out to be significant. The findings of the paper debunk the North-South or core-periphery dichotomy that is embedded in the international environment justice tradition (including the ecologically unequal exchange theory) as well as in international environmental regulatory regimes such as the Basel Convention. The paper contributes to the discussions about value that are central in political economic approaches to global trade (e.g., the global value chain and global production network) by demonstrating the relative, spatial, and dynamic nature of the concept. As the transboundary trade in plastic waste has exacerbated pollution and marine litter in some major receiving countries, it needs to be better monitored and regulated to ensure it is conducted in a transparent and environmentally sound manner. The paper also explores several policy measures that could help tackle the plastic pollution crisis and achieve sustainable development.

E-waste it wisely: lessons from Africa.

E-waste is the world's fastest growing and most valuable domestic waste stream. The increasing production of e-waste is driving elevated levels of export from developed to developing countries. Although countries worldwide are actively recognising the issues around e-waste and introducing policies, legislation or regulations governing e-waste, a large fraction of e-waste, goes undocumented at its end-of-life. Much of the global e-waste is accumulating in open dumpsites in several African countries. Using available data, we calculate the total e-waste in Africa (locally produced plus imported e-waste) for 2019 to be between 5.8 and 3.4 metric tonnes (Mt). This is believed to be an underestimate, large data gaps exist, hindering more precise estimates. The data is further complicated by, sometimes intentional, differences in labelling and reporting between formal and intermittent informal importers. Based on the available data, the main African recipients of e-waste are Nigeria, Ghana, and Tanzania, with Kenya, Senegal and Egypt featuring as countries of concern. The lack of proper waste management in the recipient developing countries, leads to environmental contamination and human exposure. A coordinated, regional and global, approach is needed in tackling e-waste. Regulatory frameworks, together with monitoring and compliance mechanisms need to be developed, financed, and enforced.

The effects on Thailand of China's import restrictions on waste: measures and challenges related to the international recycling of waste plastic and e-waste.

This paper has outlined the measures and challenges facing Thailand, which was forced to address a surge in imports of plastic waste and e-waste after China imposed restrictions on its own imports of waste material. Thailand had imposed import restrictions and created an import permit system prior to China's decision. However, the nation was not prepared for the extent of the subsequent smuggling and other illegal activities, as evidenced by the various problems related to the permit system and customs enforceability in 2018. In response, Thailand banned imports of plastic waste and e-waste, resulting in a loss of business opportunities for companies with legal import permits. Other nations in Southeast Asia, such as Vietnam, Malaysia, and the Philippines, witnessed a similar surge in imports of plastic waste and e-waste after China's decision to restrict waste imports. These nations subsequently also imposed import bans and/or restrictions. However, the enforceability of such bans and restrictions may be limited in Asia. Thus, exporting countries must secure an appropriate international recycling mechanism.

Concentrations of POPs based wood preservatives in waste timber from demolished buildings and its recycled products in Japan.

One of the major proportions of recycled persistent organic pollutants (POPs)-containing waste is timber originating from old buildings, utility poles, and cross-arms because POPs-based treatments were once a common means of preserving wood. In 2016 and 2017, we conducted the first survey in Japan on the residue concentrations of chlordanes (CHLs), pentachlorophenol (PCP), pentachloroanisole (PCA), and polychloronaphthalenes (PCNs) in waste timber (n = 55) and its recycled products (woodchip, n = 42; particle board, n = 3). In the recycled products, the highest concentrations detected were 0.86 mg kg-1 CHLs, 3.0 mg kg-1 PCP, 1.1 mg kg-1 PCA, and 2.6 mg kg-1 PCNs, which were one to two orders lower than the low POP content (LPC) limits for the environmentally sound management of wastes defined under the Basel Convention (50, 100, and 10 mg kg-1, respectively). In the waste timber, which included bearers and columns from demolished buildings, the highest concentrations were 15 mg kg-1 CHLs, 0.20 mg kg-1 PCP, and 0.036 mg kg-1 PCNs, no higher than about 30% of the LPC limit. The concentration of CHLs in timber bearer was significantly higher than those in timber column (p < 0.05). Although none of the waste timber or recycled products had concentrations exceeding the LPC limits, one means of ensuring low POP concentrations in recycled products is separating timber bearer from timber column when demolishing wooden buildings, according to the results in Japan. The timber column can be used to produce recycled products and the remaining timber can be used for heat utilization and power generation.

Marine litter plastics and microplastics and their toxic chemicals components: the need for urgent preventive measures.

Persistent plastics, with an estimated lifetime for degradation of hundreds of years in marine conditions, can break up into micro- and nanoplastics over shorter timescales, thus facilitating their uptake by marine biota throughout the food chain. These polymers may contain chemical additives and contaminants, including some known endocrine disruptors that may be harmful at extremely low concentrations for marine biota, thus posing potential risks to marine ecosystems, biodiversity and food availability. Although there is still need to carry out focused scientific research to fill the knowledge gaps about the impacts of plastic litter in the marine environment (Wagner et al. in Environ Sci Eur 26:9, 2014), the food chain and human health, existing scientific evidence and concerns are already sufficient to support actions by the scientific, industry, policy and civil society communities to curb the ongoing flow of plastics and the toxic chemicals they contain into the marine environment. Without immediate strong preventive measures, the environmental impacts and the economic costs are set only to become worse, even in the short term. Continued increases in plastic production and consumption, combined with wasteful uses, inefficient waste collection infrastructures and insufficient waste management facilities, especially in developing countries, mean that even achieving already established objectives for reductions in marine litter remains a huge challenge, and one unlikely to be met without a fundamental rethink of the ways in which we consume plastics. This document was prepared by a working group of Regional Centres of the Stockholm and Basel Conventions and related colleagues intended to be a background document for discussion in the 2017 Conference of the Parties (COP) of the Basel Convention on hazardous wastes and the Stockholm Convention on persistent organic pollutants (POPs). The COP finally approved that the issue of plastic waste could be dealt by its Regional Centres and consistently report their activities on the matter to next COP's meetings.

Waste electrical and electronic equipment management and Basel Convention compliance in Brazil, Russia, India, China and South Africa (BRICS) nations.

Brazil, Russia, India, China and South Africa (BRICS) nations account for one-quarter of the world's land area, having more than 40% of the world's population, and only one-quarter of the world gross national income. Hence the study and review of waste electrical and electronic equipment management systems in BRICS nations is of relevance. It has been observed from the literature that there are studies available comparing two or three country's waste electrical and electronic equipment status, while the study encompassing the BRICS nations considering in a single framework is scant. The purpose of this study is to analyse the existing waste electrical and electronic equipment management systems and status of compliance to Basel convention in the BRICS nations, noting possible lessons from matured systems, such as those in the European Union EU) and USA. The study introduced a novel framework for a waste electrical and electronic equipment management system that may be adopted in BRICS nations and revealed that BRICS countries have many similar types of challenges. The study also identified some significant gaps with respect to the management systems and trans-boundary movement of waste electrical and electronic equipment, which may attract researchers for further research.

A crack in the facade? Situating Singapore in global flows of electronic waste.

Singapore is alleged to be a key node in global flows of e-waste prohibited under the Basel Convention. We combine a close reading of the Convention and related documents with findings from nonparticipant observation of and interviews with Singapore-based traders of discarded electronics. The case offers both important conceptual and empirical findings for future studies of territory in market-making activity. Conceptually, our research suggests that it may be analytically useful in such studies to conceptualize territory without presupposing that it is generated as a result of separate domains or logics such as 'the political' or 'the economic'. Empirically, we find that the regulatory framework of the Convention, combined with the action of traders based in Singapore, generates a territorialization of the city-state such that it operates as a crack in the regulatory edifice of the Convention, even as Singapore lawfully fulfils its obligations to it. Moreover, allegations premised on the role of Singapore as a facilitator of global e-waste dumping misrepresent its crucial role as a conduit of electronic equipment for the significant reuse markets elsewhere in Southeast Asia and beyond. The case indicates that the allegations against Singapore hinge on the city-state being territorialized as a 'developing country'.

Polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in e-waste plastic in Nigeria.

Plastics from cathode ray tube (CRT) casings were sampled in Nigeria and analysed for their polybrominated dibenzo-p-dioxin and dibenzofuran (PBDD/F) content. PBDD/Fs, consisting mainly of PBDFs, were detected in BFR containing plastic with a median (mean) concentration of 18,000 ng/g (41,000 ng/g). The PBDD/Fs levels were highest in samples containing PBDEs, but the levels of PBDFs were two orders of magnitude higher than the levels reported in the technical PBDE mixtures and where frequently exceeding 1000 µg/g of PBDE content. These higher levels are likely to arise from additional transformation of PBDEs during production, use, recycling, or storage, but the processes responsible were not identified in this study. PBDD/Fs in CRT casings containing1,2-bistribromophenoxyethane (TBPE) were dominated by tetrabrominated dibenzo-p-dioxin (TBDDs) with concentrations around 10 µg/g of the TBPE content. The PBDD/Fs in CRT casings containing tetrabromobisphenol A (TBBPA) were found at concentrations around 0.1 µg/g of TBBPA levels. Casings treated with TBPE or TBBPA often contained PBDEs (and PBDF) as impurities-probably originating from recycled e-waste plastics. It was estimated that the 237,000 t of CRT casings stockpiled in Nigeria contain between 2 and 8 t of PBDD/Fs. The total PBDD/F contamination in polymers arising from total historic PBDE production/use is estimated in the order of 1000 t. TEQ values of CRT samples frequently exceeded the Basel Convention's provisional low POPs content of 15 ng TEQ/g. Due to the significant risks to health associated with PBDD/Fs, more detailed studies on the exposure routes from PBDD/Fs in stockpiles are needed.

Threats to water resources from hexachlorobenzene waste at Kalush City (Ukraine)--a review of the risks and the remediation options.

The production of chlorinated solvents such as tetrachloroethylene and tetrachloromethane has resulted in large stockpiles of unintentionally produced persistent organic pollutants (POPs) including high content of hexachlorobenzene (HCB waste). HCB waste of 15,000 t arising from the production of chlorinated solvents at the Kalush factory in Ukraine was landfilled. In 2008, it was discovered that HCB and other pollutants were escaping from the landfill into local environment including the Sapogi-Limnytsia Rivers, tributaries of the Dniester River. This showed that the HCB waste was not appropriately contained and represented a threat to the Dniester River basin. A Presidential Decree of Ukraine was therefore issued requiring remediation of the site and excavation of the waste. Between 2010 and 2013, approximately 29,445 t of HCB waste and associated contaminated soil was excavated and exported to various EU countries for incineration. This excavation revealed that these wastes can corrode through their drums within a few decades with release of pollutants. Other sites at which chlorinated solvents were produced should therefore be assessed for possible similar pollution. Despite the remediation efforts and the excavation of the landfill, the Kalush area remains a POP-contaminated site requiring further assessment. A part of the waste was exported to Poland and is stored close to the Baltic Sea and is treated in an incinerator with small capacity over a time frame of years. This case and recent similar cases reveal that the control of POP waste for destruction even in EU countries needs to be improved.