Construction of 2D/2D S-scheme Bi2MoO6/Zn-TCPP heterojunction via in-situ self-assembly growth strategy to enhance interface effect for efficient photocatalytic hydrogen production.

Two-dimensional/two-dimensional (2D/2D) heterojunctions are considered to be an effective strategy for forming strong interface effects and facilitating photogenerated carrier separation. However, it is usually limited by the size mismatch of the materials, even at the expense of its redox capability. Herein, 2D/2D S-scheme heterojunction photocatalyst Bi2MoO6/Zn-TCPP (BMO/ZTP) composed of 2D Bi2MoO6 and 2D Zn-TCPP (TCPP: tetrakis (4-carboxyphenyl) porphyrin) (MOFs) was constructed by in-situ self-assembly growth strategy. The size-compatible 2D/2D composites had abundant surface active sites and strong interactions. In addition, band bending and interfacial electric field (IEF) effect based on S-scheme heterojunction could accelerate the separation and migration of photogenerated carriers in BMO/ZTP. The best hydrogen precipitation rate of the BMO/ZTP was 10900.94 umol·g-1·h-1, which was 38.90 and 3.24 times higher than that of Bi2MoO6 (280.26 umol·g-1·h-1) and Zn-TCPP (3360.34 umol·g-1·h-1), respectively. The results indicated that 2D/2D BMO/ZTP S-scheme heterojunction could enhance the interface effect and retain strong reducing electrons to achieve efficient photocatalytic hydrogen production, which was confirmed by ultraviolet photoelectron spectroscopy (UPS), Tafel curve, electron spin resonance (ESR) and time-resolved photoluminescence (TRPL) characterization and density functional theory (DFT) calculations. This work provided a general strategy for constructing 2D Bi2MoO6 and 2D MOFs S-scheme heterojunctions to enhance interface effects for achieving efficient photocatalytic hydrogen production.

Enhanced photocatalytic activity of Bi2MoO6/CdS/Ni ternary heterojunction: Role of Mott Schottky barrier and 2D-2D nanostructure for superior photodegradation of 2-aminophenol.

A unique heterojunction combining Bi2MoO6/CdS with Ni nanoparticles has been synthesized using the solvothermal method. This novel heterojunction, composed of NSs and NRs, was characterized using XRD, Raman, SEM, TEM, STEM, EDX, XPS, UV, and PL techniques. The synthesized heterojunctions exhibited substantial photocatalytic activity towards the degradation of 2-aminophenol, significantly outperforming their single-metal counterparts. The photocatalytic efficiency of the tripartite sheet and rod composite was about 26 and 16 times higher than that of the separate CdS sheets and rods for the reduction of 2-aminophenol. The primary reactive species for photocatalytic degradation were identified as the holes of Bi2MoO6 and the electrons of CdS. The Mott Schottky barrier established between CdS and Ni nanoparticles prevents the transfer of electrons from Ni nanoparticles back to CdS, allowing Ni nanoparticles to efficiently capture electrons and prevent any backward flow. This, in turn, results in enhanced photocatalytic activity. The improved photocatalytic capability is ascribed to the S-scheme heterojunction between Bi2MoO6/CdS, which promotes better separation of electrons and holes. The Mott Schottky barrier between CdS and Ni also ensures a more abundant electron supply for chemical reactions, minimizing potential losses. The 2D-2D nanostructure morphology of Bi2MoO6 and CdS extends the surface area, enhancing light utilization and providing more active reaction sites. The synthesized heterojunction demonstrated impressive stability over three cycles, highlighting its potential for recycling and repeated use.

Real time detection and identification of fish quality using low-power multimodal artificial olfaction system.

Single gas quantification and mixed gas identification have been the major challenges in the field of gas detection. To address the shortcomings of chemo-resistive gas sensors, sensor arrays have been the subject of recent research. In this work, the research focused on both optimization of gas-sensing materials and further analysis of pattern recognition algorithms. Four bimetallic oxide-based gas sensors capable of operating at room temperature were first developed by introducing different modulating techniques on the sensing layer, including constructing surface oxygen defects, polymerizing conducting polymers, modifying Nano-metal, and compositing flexible substrates. The signals derived from the gas sensor array were then processed to eliminate noise and reduce dimension with the feature engineering. The gases of were qualitatively identified by support vector machine (SVM) model with an accuracy of 98.86 %. Meanwhile, a combined model of convolutional neural network and long short-term memory network (CNN-LSTM) was established to remove the interference samples and quantitatively estimate the concentration of the target gases. The combined model based on deep learning, which avoids the overfitting with local optimal solutions, effectively boosts the performance of concentration recognition with the lowest root mean square error (RMSE) of 2.3. Finally, a low-power artificial olfactory system was established by merging the multi-sensor data and applied for real-time and accurate judgment of the food freshness.

Effect of Bi2MoO6 Morphology on Adsorption and Visible-Light-Driven Degradation of 2,4-Dichlorophenoxyacetic Acid.

The development of highly efficient and stable visible-light-driven photocatalysts for the removal of herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) from water is still a challenge. In this work, Bi2MoO6 (BMO) materials with different morphology were successfully prepared via a simple hydrothermal method by altering the solvent. The morphology of the BMO material is mainly influenced by the solvent used in the synthesis (H2O, ethanol, and ethylene glycol or their mixtures) and to a lesser extent by subsequent thermal annealing. BMO with aggregated spheres and nanoplate-like structures hydrothermally synthesized in ethylene glycol (EG) and subsequently calcined at 400 °C (BMO-400 (EG)) showed the highest adsorption capacity and photocatalytic activity compared to other synthesized morphologies. Complete degradation of 2,4-D on BMO upon irradiation with a blue light-emitting diode (LED, λmax = 467 nm) was reached within 150 min, resulting in 2,4-dichlorophenol (2,4-DCP) as the main degradation product. Holes (h+) and superoxide radicals (⋅O2-) are assumed to be the reactive species observed for the rapid conversion of 2,4-D to 2,4-DCP. The addition of H2O2 to the reaction mixture not only accelerates the degradation of 2,4-DCP but also significantly reduces the total organic carbon (TOC) content, indicating that hydroxyl radicals are crucial for the rapid mineralization of 2,4-D. Under optimal conditions, the TOC value was reduced by 84.5% within 180 min using BMO-400 (EG) and H2O2. The improved degradation performance of BMO-400 (EG) can be attributed to its particular morphology leading to lower charge transfer resistance, higher electron-hole separation, and larger specific surface area.

CeO2 nanospheres incorporated with Bi2MoO6/g-C3N4 enhanced photocatalysis towards environmental pollutant Rhodamine B removal.

We have adopted a novel CeO2/Bi2MoO6/g-C3N4-based ternary nanocomposite that was synthesized via hydrothermal technique. The physiochemical characterization of as-prepared samples was examined through various analytical techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy TEM, photoluminescent spectra (PL), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), and ultraviolet diffuse reflectance spectroscopy (UV-DRS) technique. In addition, the photocatalytic performance was carried out by degradation of Rhodamine B dye under visible light irradiation using this nanocatalyst. The ternary nanocomposite achieved 94% of the degradation efficiency within 100 min which is higher than the pristine and binary composites under the predetermined condition pH = 7, Rhodamine B dye = 5 mg/L, and catalyst concentration = 150 mg/L. The experimental synergetic effect of CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite has been ascribed to the interfacial charge carrier migration between CeO2, Bi2MoO6, and g-C3N4. The optical absorption range of CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite was enhanced, and the band gap was reduced up to 2.2 eV. In addition, scavenger trapping experiment proves that the super oxide anions (O2-.) and photogenerated holes are the major active species. The reusability and stability experiment proved the CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite keeps good durability during the photocatalytic degradation process after the five successive cycles. Furthermore, based on the results, the charge carrier transfer photocatalytic mechanism was also discussed. This CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite may offer the cheapest material and extend the great opportunity for clean and environmental remediation approach under the visible light irradiation.

Construction of self-cleaning g-C3N4/Bi2MoO6/PVDF membrane and coupling with photo-Fenton-like reaction for sustainable removal of antibiotics in wastewater.

Constructing a photocatalytic membrane and photo-Fenton reaction coupling system is a novel strategy to enhance the photocatalytic activity of the membrane and eliminate the problem of membrane contamination. Herein, a g-C3N4/Bi2MoO6/PVDF photocatalytic membrane was prepared using a tannic acid-assisted in-situ deposition method. The membrane was characterized by three advantages of photocatalytic, self-cleaning, and antibacterial properties. Under the photo-Fenton-like conditions, the membrane had superior photodegradation efficiency of 90.7% for tetracycline, one of the main antibiotic contaminants in the China's aquatic system. Moreover, the membrane had excellent photo-Fenton self-cleaning ability, its flux recovery rate was up to 96%-98% after the self-cleaning process. Photoluminescence spectra, diffuse UV-visible spectrum, transient photocurrent responses, and electrochemical AC impedance spectrum results show that the heterojunction structure formed by g-C3N4 and Bi2MoO6 could improve the separation efficiency of photogenerated electrons-hole pairs. Electron spin resonance spectroscopy confirmed the photo-electrons facilitated the formation of hydroxyl radical (·OH) in the existence of H2O2, which enhanced tetracycline degradation. Moreover, the superior photo-Fenton self-cleaning performance, which mainly relied on the active free radicals produced by the photo-Fenton-like membrane to remove dirt on the membrane surface or in the membrane pore channel. Our results may shed new light on the development of promising photocatalytic membrane systems by coupling with photo-Fenton-like processes, and facilitate their applications for wastewater treatment.

Developing Z-scheme Bi2MoO6@α-MnO2 beaded core-shell heterostructure in photoelectrocatalytic treatment of organic wastewater.

Photoelectrocatalysis (PEC) oxidation technology with the combination of electrocatalysis and photocatalysis is an ideal candidate for treatment of dyeing wastewater containing multifarious intractable organic compounds with high chroma. Constructing high-quality heterojunction photoelectrodes can effectively suppress the recombination of photo-generated carriers, thereby achieving efficient removal of pollution. Herein, a beaded Bi2MoO6@α-MnO2 core-shell architecture with tunable hetero-interface was prepared by simple hydrothermal-solvothermal process. The as-synthesized Bi2MoO6@α-MnO2 had larger electrochemically active surface area, smaller charge transfer resistance and negative flat band potential, and higher separation efficiency of e-/h+ pairs than pure α-MnO2 or Bi2MoO6. It is noteworthy that the as-synthesized Bi2MoO6@α-MnO2 showed Z-scheme heterostructure as demonstrated by the free radical quenching experiments. The optimized Bi2MoO6@α-MnO2-2.5 exhibited the highest degradation rate of 88.64% in 120 min for reactive brilliant blue (KN-R) and accelerated stability with long-term(∼10000s) at the current density of 50 mA cm-2 in 1.0 mol L-1 H2SO4 solution. This study provides valuable insights into the straightforward preparation of heterogeneous electrodes, offering a promising approach for the treatment of wastewater in various industrial applications.

Fe-Doped g-C3N4/Bi2MoO6 Heterostructured Composition with Improved Visible Photocatalytic Activity for Rhodamine B Degradation.

The binary heterostructured semiconducting visible light photocatalyst of the iron-doped graphitic carbon nitride/bismuth molybdate (Fe-g-C3N4/Bi2MoO6) composite was prepared by coupling with Fe-doped g-C3N4 and Bi2MoO6 particles. In the present study, a comparison of structural characteristics, optical properties, and photocatalytic degradation efficiency and activity between Fe-doped g-C3N4 particles, Bi2MoO6 particles, and Fe-g-C3N4/Bi2MoO6 composite was investigated. The results of X-ray diffraction (XRD) examination indicate that the hydrothermal Bi2MoO6 particles have a single orthorhombic phase and Fourier transform infrared (FTIR) spectroscopy analysis confirms the formation of Fe-doped g-C3N4. The optical bandgaps of the Fe-doped g-C3N4 and Bi2MoO6 particles are 2.74 and 2.73 eV, respectively, as estimated from the Taut plots obtained from UV-Vis diffuse reflectance spectroscopy (DRS) spectra. This characteristic indicates that the two semiconductor materials are suitable for absorbing visible light. The transmission electron microscopy (TEM) micrograph reveals the formation of the heterojunction Fe-g-C3N4/Bi2MoO6 composite. The results of photocatalytic degradation revealed that the developed Fe-g-C3N4/Bi2MoO6 composite photocatalyst exhibited significantly better photodegradation performance than the other two single semiconductor photocatalysts. This property can be attributed to the heterostructured nanostructure, which could effectively prevent the recombination of photogenerated carriers (electron-hole pairs) and enhance photocatalytic activity. Furthermore, cycling test showed that the Fe-g-C3N4/Bi2MoO6 heterostructured photocatalyst exhibited good reproducibility and stability for organic dye photodegradation.

In-situ construct CuInS2/Bi/Bi2MoO6 S-scheme/Schottky dual heterojunctions catalyst for enhanced photocatalytic degradation of diclofenac sodium.

In this paper, the S-scheme/Schottky heterojunction photocatalyst (CuInS2/Bi/Bi2MoO6, CIS/Bi/BMO) was successfully constructed via a facile in-situ solvothermal method, aimed at enhancing its photocatalytic performance. The results of the study on the photocatalytic degradation of diclofenac sodium (DCF) under simulated solar light irradiation revealed that the as-prepared composite exhibited remarkable catalytic efficiency in comparison to the pristine Bi2MoO6 and CuInS2. The plasmonic bismuth (Bi) was formed during the solvothermal process. Subsequently, CuInS2 and Bi were grown on the surface of Bi2MoO6 leading to forming CIS/BMO S-scheme heterojunction, along with a Schottky junction between Bi and Bi2MoO6. The use of ethylene glycol as a support was the main reason for the significant improvement in photocatalytic efficiency in the degradation of DCF. Moreover, the probable photocatalytic mechanisms for the degradation of DCF had been proposed based on the active species quenching experiments. The eleven degradation products were detected by HPLC-MS, and the degradation reaction pathway of DCF was deduced. Additionally, the CIS/Bi/BMO photocatalyst exhibited a consistently high removal rate after four cycles. This study proposes a new strategy for designing efficient S-scheme/Schottky heterojunction photocatalysts for solar energy conversion.

Surface-Integrating Oxygen Vacancy and CuxO Nanodots Enabling Synergistic Electric Field and Dual Catalytic Sites Boosting CO2 Photoreduction.

High carrier separation efficiency and rapid surface catalytic reaction are crucial for enhancing catalytic CO2 photoreduction reaction. Herein, integrated surface decoration strategy with oxygen vacancies (Ov) and anchoring CuxO (1 < x < 2) nanodots below 10 nm is realized on Bi2MoO6 for promoting CO2 photoreduction performance. The charge interaction between Ov and anchored CuxO enables the formation of enhanced internal electric field, which provides a strong driving force for accelerating the separation of photocharge carriers on the surface of Bi2MoO6 (ηsurf ≈71%). They can also cooperatively reduce the surface work function of Bi2MoO6, facilitating the migration of carrier to the surface. Meanwhile, surface-integrated Ov and CuxO nanodots allowing dual catalytic sites strengthens the adsorption and activation CO2 into *CO2 over Bi2MoO6, considerably boosting the progression of CO2 conversion process. In the absence of co-catalyst or sacrificial agent, Bi2MoO6 with Ov and CuxO nanodots achieves a photocatalytic CO generation rate of 12.75 µmol g-1 h-1, a remarkable increase of over ≈15 times that of the original counterpart. This work provides a new idea for governing charge movement behaviors and catalytic reaction thermodynamics on the basis of synergistic improvement of electric field and active sites by coupling of the internal defects and external species.

Schottky Junctions with Bi@Bi2MoO6 Core-Shell Photocatalysts toward High-Efficiency Solar N2-to-Ammonnia Conversion in Aqueous Phase.

The photocatalytic nitrogen reduction reaction (NRR) in aqueous solution is a green and sustainable strategy for ammonia production. Nonetheless, the efficiency of the process still has a wide gap compared to that of the Haber-Bosch one due to the difficulty of N2 activation and the quick recombination of photo-generated carriers. Herein, a core-shell Bi@Bi2MoO6 microsphere through constructing Schottky junctions has been explored as a robust photocatalyst toward N2 reduction to NH3. Metal Bi self-reduced onto Bi2MoO6 not only spurs the photo-generated electron and hole separation owing to the Schottky junction at the interface of Bi and Bi2MoO6 but also promotes N2 adsorption and activation at Bi active sites synchronously. As a result, the yield of the photocatalytic N2-to-ammonia conversion reaches up to 173.40 µmol g-1 on core-shell Bi@Bi2MoO6 photocatalysts, as much as two times of that of bare Bi2MoO6. This work provides a new design for the decarbonization of the nitrogen reduction reaction by the utilization of renewable energy sources.

Dynamic Reconfiguration and Local Polarization of NiFe-Layered Double Hydroxide-Bi2MoO6- x Heterojunction for Enhancing Piezo-Photocatalytic Nitrogen Oxidation to Nitric Acid.

Constructing heterojunctions with vacancies has garnered substantial attention in the field of piezo-photocatalysis. However, the presence of interfacial vacancies can serve as charge-trapping sites, leading to the localization of electrons and hindering interfacial charge transfer. Herein, dual oxygen vacancies in the NiFe-layered double hydroxide and Bi2MoO6- x induced interfacial bonds have been designed for the piezo-photocatalytic N2 oxidation to NO3 -. Fortunately, it achieves sensational nitric acid production rates (7.23 mg g-1 h-1) in the absence of cocatalysts and sacrificial agents, which is 6.03 times of pure Bi2MoO6 that under ultrasound and light illumination. Theoretical and experimental results indicate that interfacial bonds act as "charge bridge" and "strain center" to break the carrier local effect and negative effects with piezocatalysis and photocatalysis for promoting exciton dissociation and charge transfer. Moreover, the strong electronic interaction of the interfacial bond induces internal reconstruction under ultrasound for promoting the local polarization and adsorption of N2, which accelerates the fracture of the N≡N bonds and reduces the activation energy of the reaction. The research not only establishes a novel approach for optimizing the combined effects of piezo-catalysis and photocatalysis, but also achieves equilibrium between the synergistic impacts of vacancies and heterojunctions.

The Fabrication and Property Characterization of a Ho2YSbO7/Bi2MoO6 Heterojunction Photocatalyst and the Application of the Photodegradation of Diuron under Visible Light Irradiation.

A novel photocatalytic nanomaterial, Ho2YSbO7, was successfully synthesized for the first time using the solvothermal synthesis technique. In addition, a Ho2YSbO7/Bi2MoO6 heterojunction photocatalyst (HBHP) was prepared via the hydrothermal fabrication technique. Extensive characterizations of the synthesized samples were conducted using various instruments, such as an X-ray diffractometer, a Fourier transform infrared spectrometer, a Raman spectrometer, a UV-visible spectrophotometer, an X-ray photoelectron spectrometer, and a transmission electron microscope, as well as X-ray energy dispersive spectroscopy, photoluminescence spectroscopy, a photocurrent test, electrochemical impedance spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance. The photocatalytic activity of the HBHP was evaluated for the degradation of diuron (DRN) and the mineralization of total organic carbon (TOC) under visible light exposure for 152 min. Remarkable removal efficiencies were achieved, with 99.78% for DRN and 97.19% for TOC. Comparative analysis demonstrated that the HBHP exhibited markedly higher removal efficiencies for DRN compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.13 times, 1.21 times, or 2.95 times higher, respectively. Similarly, the HBHP demonstrated significantly higher removal efficiencies for TOC compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.17 times, 1.25 times, or 3.39 times higher, respectively. Furthermore, the HBHP demonstrated excellent stability and reusability. The mechanisms which could enhance the photocatalytic activity remarkably and the involvement of the major active species were comprehensively discussed, with superoxide radicals identified as the primary active species, followed by hydroxyl radicals and holes. The results of this study contribute to the advancement of efficient heterostructural materials and offer valuable insights into the development of sustainable remediation strategies for addressing DRN contamination.

Frustrated Lewis pairs created by Ce-doped Bi2MoO6: A universal strategy to promote efficient utilization of H2O2 for Fenton-like photodegradation.

Photo-Fenton-like technology based on H2O2 is considered as an ideal strategy to generate reactive oxygen species (ROS) for antibiotic degradation, but O2 overflow in the process severely limits the utilization efficiency of H2O2. Herein, we fabricate Bi2MoO6 (BMO) photocatalyst modified with Frustrated Lewis pairs (FLPs) as a Fenton catalyst model for enhancing reuse of spilled O2. The FLPs created by the introduction of cerium and oxygen vacancy were found to contribute to regulate the electronic structure of BMO and further improve the acidic and basic properties of photocatalyst surface. More importantly, the frustrated acid and base sites can enhance the H2O2 and O2 interfacial adsorption process and provide an Ce4+-Ov-O2- active site on the surface of Ce-BMO nanosheets, which can promote O2/•O2-/1O2/H2O2 redox cycles to achieve high H2O2 utilization efficiency. Specifically, in the experiment using tetracycline as a photocatalytic degradation object, the degradation activity of Ce-BMO was 2.15 times higher than that of BMO pure phase. Quenching experiments and EPR assays also confirmed that 1O2 and •O2- were the dominant oxidative species. This study systematically reveals the design of Fenton photocatalytic active sites at the atomic scale and provides new insights into constructing FLPs photocatalysts with high H2O2 utilization efficiency.

Hydrangea-like TiO2/Bi2MoO6 porous nanoflowers triggering highly sensitive electrochemical immunosensing to tumor marker.

Rapid and sensitive detection of carcinoembryonic antigen (CEA) is of great significance for cancer patients. Here, molybdenum (Mo) was doped into bismuth oxide (Bi2O3) by one-pot hydrothermal method forming porous tremella Bi2MoO6 nanocomposites with a larger specific surface area than the spherical structure. Then, a new kind of hydrangea-like TiO2/Bi2MoO6 porous nanoflowers (NFs) was prepared by doping titanium into Bi2MoO6, where titanium dioxide (TiO2) grew in situ on the surface of Bi2MoO6 nanoparticles (NPs). The hydrangea-like structure provides larger specific surface area, higher electron transfer ability and biocompatibility as well as more active sites conducive to the attachment of anti-carcinoembryonic antigen (anti-CEA) to TiO2/Bi2MoO6 NFs. A novel label-free electrochemical immunosensor was then constructed for the quantitative detection of CEA using TiO2/Bi2MoO6 NFs as sensing platform, showing a good linear relationship with CEA in the concentration range 1.0 pg/mL ~ 1.0 mg/mL and a detection limit of 0.125 pg/mL (S/N = 3). The results achieved with the designed immunosensor are comparable with many existing immunosensors used for the detection of CEA in real samples.

Modulating charge oriented accumulation via interfacial chemical-bond on In2O3/Bi2MoO6 heterostructures for photocatalytic nitrogen fixation.

Photocatalytic nitrogen fixation presents an eco-friendly approach to converting atmospheric nitrogen into ammonia (NH3), but the process faces challenges due to rapid interface charge recombination. Here, we report an innovative charge transfer and oriented accumulation strategy using an In-O-Mo bond-modulated S-scheme heterostructure composed of In2O3/Bi2MoO6 (In/BMO) synthesized using a simple electrostatic assembly. The unique interfacial arrangement with optimal photocatalyst configuration (3 % In/BMO) enabled enhanced photogenerated electron separation and transfer, leading to a remarkable nitrogen fixation rate of approximately 150.9 µmol·gcat-1·h-1 under visible light irradiation. The performance of the photocatalyst was 9-fold and 27-fold higher than that of its pristine components, Bi2MoO6 and In2O3, respectively. The experimental and theoretical evaluation deemed interfacial In-O-Mo bonds crucial for rapid transfer and charge-oriented accumulation. Whereas the generated internal electric field drove the spatial separation and transfer of photo-generated electrons and holes, significantly enhancing the photocatalytic N2-to-NH3 conversion efficiency. The proposed work lays the foundation for designing S-scheme heterostructures with highly efficient interfacial bonds, offering a promising avenue for substantial improvements in photocatalytic nitrogen fixation.

Interfacial complexation between Fe3+ and Bi2MoO6 promote efficient persulfate activation via Fe3+/Fe2+ cycle for organic contaminates degradation upon visible light irradiation.

To address the observed decrease in efficiency during Fe2+-mediated persulfate (PDS) activation caused by slow electron transfer rates and challenges in cycling between Fe3+/Fe2+ states, we devised a strategy to establish interfacial complexation between Fe3+ and Bi2MoO6 in the presence of PDS. The proposed approach facilitates more efficient capture of photogenerated electrons, thereby accelerating the rate-limiting reduction process of the Fe3+/Fe2+ cycle under visible light irradiation and promoting PDS activation. The Bi2MoO6/Fe3+/PDS/Vis system demonstrates complete degradation of organic pollutants, including Atrazine (ATZ), carbamazepine (CBZ), bisphenol A (BPA), and 2,4-dichlorophenol (DCP) at a concentration of 10 mg/L within a rapid reaction time of 30 min. Radical scavenging experiments and electron paramagnetic resonance spectra (EPR) confirm that the sulfate radical (•SO4-) is the dominant species responsible for organic contaminant degradation. The real-time conversion process between Fe3+ and Fe2+ was monitored by observing changes in iron species forms and concentrations within the reaction system. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy verify the formation of a complexation between Fe3+ and Bi2MoO6, facilitating anchoring of Fe3+ onto material surface. Based on these findings, we propose a reliable mechanism for the activation reaction. This work presents a promising heterogeneous PDS activation method based on Fe3+/Fe2+ cycle for water treatment.

2D/2D Bi2MoO6/CoAl LDH S-scheme heterojunction for enhanced removal of tetracycline: Performance, toxicity, and mechanism.

In this paper, the two-dimensional (2D) layered CoAl LDH (CoAl) was coupled with Bi2MoO6 (BMO) nanoplate and used for tetracycline (TC) degradation. Based on the results of UV-visible diffuse reflectance spectrum (UV-vis DRS), Motty-Schottky curves, and in situ X-ray photoelectron spectroscopy (XPS), a novel 2D/2D Bi2MoO6/CoAl LDH S-scheme heterojunction photocatalyst was built. The photodegradation rate constant of TC by the optimized sample BMO/CoAl30 was 3.637 × 10-2 min-1, which was 1.26 times and 4.01 times higher than that of Bi2MoO6 and CoAl LDH, respectively. The favorable photocatalytic performance of the heterojunction was attributed to the increased interfacial contact area of the 2D/2D structure. Besides, the transfer of photogenerated electrons from Bi2MoO6 to CoAl LDH under the effect of the built-in electric field (BIEF) reduced the recombination of photogenerated carriers and further improved the photocatalytic performance. The reactive species of h+, ·O2-, and 1O2 exhibited critical roles to degrade TC molecules by reactive radicals capture experiments and electron spin resonance (ESR) tests. The intermediate products of TC degradation and toxicity of intermediates were analyzed by liquid chromatography-mass spectrometer (LC-MS) and Toxicity Estimation Software Tool (T.E.S.T). Additionally, the BMO/CoAl composite photocatalysts showed high stability and environmental tolerance during the testing of cycles and environmental impacts with various water sources, organic contaminants, initial pH, and inorganic ions. This work provides a new protocol for designing and constructing novel 2D/2D S-scheme heterojunction photocatalysts for wastewater treatment.

Anion-Mediated In Situ Reconstruction of the Bi2MoO6 Precatalyst for Enhanced Electrochemical CO2 Reduction over a Wide Potential Window.

Electrochemical CO2 reduction reaction (eCO2RR) is a viable approach to achieve carbon neutrality. Bismuth-based electrocatalysts demonstrate exceptional selectivity in CO2-to-formate conversion, but their reconstruction mechanisms during the eCO2RR remain elusive. Herein, the reconstruction processes of bismuth molybdate (Bi2MoO6) nanoplates are elucidated during the eCO2RR. Operando and ex situ measurements reveal the in situ partial reduction of Bi2MoO6 to Bi metal, forming Bi@Bi2MoO6 at negative potentials. Meanwhile, CO32- ions in the electrolyte spontaneously exchange with MoO42- in Bi2MoO6. The obtained Bi@Bi2MoO6/Bi2O2CO3 delivers a formate Faradaic efficiency (FE) of 95.2% at -1.0 V. Notably, high formate FEs (>90%) are maintained within a wide 500 mV window. Although computational calculations indicate a higher energy barrier for *OCHO formation on Bi2O2CO3, the prevention of excessive reduction to metal Bi significantly enhances long-term stability. Furthermore, the CO32- ion exchange process occurs in various 2D Bi-containing precatalysts, which should be emphasized in further studies.

Nanosheet g-C3N4 enhanced by Bi2MoO6 for highly efficient photocatalysts toward photodegradation of Rhodamine-B dye.

The investigation of a proficient photocatalytic system for the degradation of organic pollutants holds significant importance in the field of environmental management. This study presents a binary type II heterojunction photocatalyst, Bi2MoO6/g-C3N4 which is synthesized using an eco-friendly ultrasonic-assisted method. Various characterization methods (XRD, FTIR, XPS, BET, TEM, UV-vis, and PL) are used to investigate the crystalline structures, composition, surface analysis, morphology, and optical properties of the photocatalyst. All the Bi2MoO6/g-C3N4 nanocomposites show better photocatalytic activity for Rhodamine B dye (Rh-B) degradation under Ultraviolet light irradiation than the pure g-C3N4. The photocatalytic activity of the 10 % Bi2MoO6/g-C3N4 nanocomposite is found to be the greatest among the tested samples. the 10 % Bi2MoO6/g-C3N4 nanocomposite demonstrates the ability to degrade 94.6 % of Rh-B (1 × 10-5 M) within 3 h, with a rate constant of 0.015 min-1. Notably, this rate constant is 7 times greater than that observed for pure g-C3N4, which has a rate constant of 0.00218 min-1. The effect of several reaction factors on the Rhodamine B (Rh-B) removal is studied. The enhanced photocatalytic activity of 10 % Bi2MoO6/g-C3N4 nanocomposite is mainly due to the formation of 2D/2D type II structures, increasing the active sites and the separation rate of photogenerated carriers. A possible photocatalytic reaction mechanism of Rhodamine B (Rh-B) degradation over Bi2MoO6/g-C3N4 is suggested based on active species trapping experiment. Moreover, the high stability and recyclability exhibited by the 10 % Bi2MoO6/g-C3N4 nanocomposite provide strong evidence supporting its suitability as a viable photocatalyst for wastewater treatment purposes.