Clinical outcome of non-surgical root canal treatment using different sealers and techniques of obturation in 237 patients: A retrospective study.

OBJECTIVES: The aim of this retrospective study was to compare the clinical results of two root canal sealers and three obturation techniques used for non-surgical root canal treatment. MATERIALS AND METHODS: A total of two hundred eighty-three root canal treated teeth in two hundred thirty-seven patients with minimum a 6-month follow-up was included for this study. The canals were filled with three different modes: 1) cold lateral condensation (CLC) and AH Plus Sealer; 2) continuous wave condensation technique (CWC) and AH Plus Sealer, and 3) sealer-based obturation technique (SBO) and AH Plus Bioceramic Sealer. The treatment outcome was analysed based on clinical signs and symptoms, and periapical radiograph (periapical index, PAI). RESULTS: There were no significant differences in treatment outcome between various sealers and filling techniques applied. The sealer extrusion was found most frequently in the CWC group (60.67%), followed by SBO (59.21%) and CLC (21.19%) with statistically significant differences (p < .05). The initial diagnosis, previous treatment and sealer extrusion (p < .05) were prognostic factors that affected treatment outcome. CONCLUSIONS: Based on the findings of this study, neither the sealer type nor the filling technique affected the treatment success while preoperative diagnosis, previous treatment and sealer extrusion had significant effect on the outcome. CLINICAL RELEVANCE: A bioceramic sealant applied along with the single-cone technique might be considered as an alternative method in root canal obturation.

In vitro evaluation of the impact of a bioceramic root canal sealer on the mechanical properties of tooth roots.

Bacground/purpose: Endodontically treated teeth are more prone to vertical root fracture with the mechanical property changes to some extent during root canal treatment. This study aimed to investigate the effects of a bioceramic sealer on the mechanical properties of tooth roots. Materials and methods: Dentin discs were dried by two different methods (ethanol drying and paper points drying) and then filled with a BC sealer named iRoot SP. SEM and EDS were used to analyze the newly formed minerals in dentin tubules. Elastic modulus and hardness of the secondary dentin in areas proximal to the primary dentin (PD-SD) and areas proximal to canal or iRoot SP (SD-C/SD-iRoot SP) were measured using nanoindentation technique. The compressive strength of roots filled with iRoot SP were tested by compressive loading test. Results: (1) Penetration and mineralization: Paper points drying was more conducive to iRoot SP adhesion, spreading and penetration into the dentin tubules than 95% ethanol drying. (2) Micromechanical properties: After filling root canal with iRoot SP, the elastic modulus and hardness of SD-iRoot SP were higher than those of PD-SD (P = 0.001 and P = 0.000). (3) Fracture resistance: The compressive strength of the roots filled with iRoot SP was not significantly different from that of the roots unprepared and unfilled (P = 0.957), but was higher than that of the roots prepared and unfilled (P = 0.009). Conclusion: Excessive drying (95% ethanol drying method) is not conducive to the penetration and mineralization of the BC sealer iRoot SP into dentin tubules. The good bioactivity of iRoot SP was responsible for increasing the elastic modulus and hardness of dentin, which strengthened the prepared roots.

Influence of bioceramic sealer residues on the adhesion interface with a universal adhesive in the etch-and-rinse strategy, based on the application protocol and evaluation time.

The aim of this study was to evaluate the effects of the application of universal adhesive in the etch-and-rinse (ER) strategy with a manual brush (MB) or rotary brush (RB) in adhesion to dentin impregnated (WB) or not (NB) with bioceramic sealer, at 24 h and 1 year. Eighty-eight crowns of bovine incisors were divided into four groups (n=22): WB-MB, WB-RB, NB-MB, NB-RB. After the restorative protocol, dentin penetrability was evaluated by confocal microscopy. Bond strength was evaluated by microtensile test. Data were analyzed using one-way ANOVA/Tukey tests (α=0.05). NB-RB and WB-RB exhibited greater extensions of resin tags in dentin. At 24 h, WB-RB and NB-MB showed the highest and lowest values of bond strength, respectively. At 1 year, WB-MB and WB-RB demonstrated the highest bond strength values. The RB increases the formation of resin tags and residues of bioceramic sealer provides higher bond strength in the ER strategy.

The Influence of Bioceramic Cements on the Activity of Macrophages of Different Lineages: A Laboratory Study.

INTRODUCTION: The repair process of periradicular tissues depends, among other factors, on the properties of endodontic cements. Macrophages are among the main cells involved in this process. MATERIALS AND METHODS: Murine peritoneal macrophages obtained from C57BL/6 (MBL6) and BALB/c (MBalb) mice, respectively, were cultured with capillaries containing or not Endosequence BC Sealer (BC), Sealer Plus BC (MK), Bio-C Sealer (Ang), and mineral trioxide aggregate (MTA). Cell viability was measured by Trypan blue and MTT methods at 24, 48, and 72 hours. Cell adhesion, phagocytosis of Saccharomyces boulardii, production of reactive oxygen species (ROS), nitric oxide (NO), and the cytokines tumor necrosis factor-α and transforming growth factor (TGF)-ß were also evaluated. The data were analyzed using the analysis of variance test (P < .05). RESULTS: Cell viability was similar between bioceramic sealers and MTA (P > .05). There was no statistical difference between both macrophages when adherence and phagocytose were assayed. The presence of inflammation stimulus significantly altered the production of ROS by MBL6 macrophages in contact with the cements. The production of TGF-ß was similar for both lineages of macrophages. CONCLUSIONS: This study shows that the evaluated bioceramic cements do not interfere with MBL6 and MBalb macrophage adhesion, phagocytic capacity, or TGF-ß production. The cements stimulated the production of ROS by MBL6 macrophages in response to induced inflammation, potentially favoring the elimination of residual pathogens.

Nanoleakage of apical sealing using a calcium silicate-based sealer according to canal drying methods.

Objectives: This study investigated the nanoleakage of root canal obturations using calcium silicate-based sealer according to different drying methods. Materials and Methods: Fifty-two extracted mandibular premolars with a single root canal and straight root were selected for this study. After canal preparation with a nickel-titanium rotary file system, the specimens were randomly divided into 4 groups according to canal drying methods (1: complete drying, 2: blot drying/distilled water, 3: blot drying/NaOCl, 4: aspiration only). The root canals were obturated using a single-cone filling technique with a calcium silicate-based sealer. Nanoleakage was evaluated using a nanoflow device after 24 hours, 1 week, and 1 month. Data were collected twice per second at the nanoscale and measured in nanoliters per second. Data were statistically analyzed using the Kruskal-Wallis and Mann-Whitney U-tests (p < 0.05). Results: The mean flow rate measured after 24 hours showed the highest value among the time periods in all groups. However, the difference in the flow rate between 1 week and 1 month was not significant. The mean flow rate of the complete drying group was the highest at all time points. After 1 month, the mean flow rate in the blot drying group and the aspiration group was not significantly different. Conclusions: Within the limitations of this study, the canal drying method had a significant effect on leakage and sealing ability in root canal obturations using a calcium silicate-based sealer. Thus, a proper drying procedure is critical in endodontic treatment.

Influence of residues from bioceramic sealer on the bond interface with universal adhesive in different application modes.

This study evaluated the effect on adhesive layer thickness, bond strength, and adhesive failure pattern of the application of universal adhesive (Scotchbond Universal) using either manual or rotary brush in dentin previously impregnated with bioceramic sealer (Sealer Plus BC) using a manual brush, at 24 h and 1 year. Eighty-eight bovine crowns were divided into four groups (n = 22) according to the intervention: (i) use of bioceramic sealer and adhesive application using manual brush, (ii) use of bioceramic sealer and adhesive application using rotary brush, (iii) use of resin sealer and adhesive application using manual brush, and (iv) use of resin sealer and adhesive application using rotary brush. Subsequently, specimens were restored with a composite resin (Filtek Z-250). Adhesive layer thickness was evaluated using confocal microscopy. Bond strength was assessed using the microtensile bond strength test, and adhesive failure pattern was evaluated under a stereomicroscope. Data were analyzed using two-way ANOVA/Tukey tests. Specimens where a rotary brush had been used exhibited lower adhesive layer thickness. Specimens treated with resin sealer and using a manual brush showed lower bond strength values and a higher occurrence of adhesive failures at 24 h and 1 year than specimens treated with bioceramic sealer and using rotary brush for adhesive application.

Outcomes of root canal treatments with three different sealers for 120 fractured maxillary fourth premolar teeth in small-to medium-sized dogs.

Introduction: Tooth fracture is one of the most common traumatic maxillofacial injuries in dogs and cats. For fractures with pulp exposure occurring in functionally important teeth, the literature indicates that root canal treatment (RCT) is an effective therapy option that may be the remedy of choice before extraction. The most commonly reported fractures in the United States involve canine teeth; however, fractures of the maxillary fourth premolars are more common in Korea, where there are many small-and medium-sized dogs. RCT mechanically and chemically removes pulp tissue and bacteria (cleaning and shaping) from the infected root canal, and obturates the root canal with filling material to restore tooth functionality without inflammation. Various techniques, instruments, and materials used in humans have been modified for application in veterinary dentistry. Methods: This study analyzed the results of RCT of the maxillary fourth premolar in 120 small-and medium-sized dogs (weighing less than 25 kg) using three different sealers (silicone-based sealer, bioceramic sealer, and calcium hydroxide-based sealer) through a simple application of the single-cone technique. Results: The overall success rate of RCT in maxillary fourth premolars was 90.83%, with 8.33% no evidence of failure (NEF) and 0.83% failure. Discussion: There were no significant differences between the three different sealers. Furthermore, preexisting periapical lesion (PAL) was reconfirmed as a factor in reducing the success rate of RCT. In addition, the working length and master apical file of each root were analyzed in our study as a novel reference for endodontic veterinarians.

Effect of collagen cross-linking agents on the depth of penetration of bioceramic sealer and release of hydroxyproline: An in vitro study.

Context: During endodontic treatment, sealers seal off dentinal tubules and prevent microbial attack. Bioceramic sealers have excellent bioactivity, but its high alkalinity is found to have detrimental effects on radicular collagen. Collagen cross linkers have the ability to chemically modify collagen and can prevent the detrimental effects of the sealer. Aim: This research was aimed to assess the effect of collagen cross-linking agents on the integrity of radicular collagen matrix and depth of penetration of sealer. Materials and Methods: Mandibular premolars (n = 48) were taken. Teeth were decoronated; canals were prepared till ProTaper size F2 and were irrigated with 5 mL of 2.5% NaOCl, followed by 3 mL of 17% ethylenediaminetetraacetic acid between instrumentation and finally rinsed with saline following which teeth were divided into three groups based on the surface treatments: Group 1: 6.5% proanthocyanin (PA), Group 2: chlorhexidine (CHX), and Group 3: saline. Teeth were obturated using gutta-percha and bioceramic sealer and stored in artificial saliva. Hydroxyproline (HYP) release was assessed after 14 and 21 days using spectrophotometer. Sealer penetration was assessed using the scanning electron microscope. Statistical Analysis: Wilcoxon signed-rank test and Kruskal-Wallis test for release of HYP and paired t-test and ANOVA for sealer penetration were performed. Results: Significantly lower release of HYP was seen in proanthocyanin-treated group. Sealer penetration was better for both the proanthocyanin- and CHX-treated groups when compared to saline. Conclusion: Surface treatment with collagen cross-linkers caused a decrease in the amount of HYP released, indicating lesser degradation of collagen. Sealer penetration was better due to the removal of smear layer following the surface treatments.

Comparative bioactivity and immunomodulatory potential of the new Bioroot Flow and AH Plus Bioceramic sealer: An in vitro study on hPDLSCs.

OBJECTIVES: To evaluate the cytocompatibility, bioactivity, and anti-inflammatory potential of the new pre-mixed calcium silicate cement-based sealers Bioroot Flow (BrF) and AH Plus Bioceramic Sealer (AHPbcs) on human periodontal ligament stem cells (hPDLSCs) compared to the epoxy resin-based sealer AH Plus (AHP). MATERIALS AND METHODS: Standardized discs and 1:1, 1:2, and 1:4 eluates of BrF, AHPbcs and AHP after setting were prepared. The following assays were performed: cell attachment and morphology via SEM, cell viability via a MTT assay, cell migration/proliferation via a wound-healing assay, cytoskeleton organization via immunofluorescence staining; cytokine release via ELISA; osteo/cemento/odontogenic marker expression via RT-qPCR, and cell mineralized nodule formation via Alizarin Red S staining. HPDLSCs were isolated from extracted third molars from healthy patients. Comparisons were made with hPDLSCs cultured in unconditioned (negative control) or osteogenic (positive control) culture media. Statistical significance was established at p < 0.05. RESULTS: Both BrF and AHPbcs showed significantly positive results in the cytocompatibility assays (cell metabolic activity, migration, attachment, morphology, and cytoskeleton organization) compared with a negative control group, while AHP showed significant negative results. BrF exhibited an upregulation of at least one osteo/cementogenic marker compared to the negative and positive control groups. BrF showed a significantly higher calcified nodule formation than AHPbcs, the negative and positive control groups, while AHPbcs was higher than the negative control group. Both were also significantly higher than AHP group. CONCLUSION: BrF and AHPbcs exhibit adequate and comparable cytocompatibility on hPDLSCs. BrF also promoted the osteo/cementogenic differentiation of hPDLSCs. Both calcium silicate-based sealers favored the downregulation of the inflammatory cytokine IL-6 and the calcified nodule formation from hPDLSCs. BrF exerted a significantly higher influence on cell mineralization than AHPbcs. CLINICAL RELEVANCE: This is the first study to elucidate the biological properties and immunomodulatory potential of Bioroot Flow and AH Plus Bioceramic Sealer. The results act as supporting evidence for their use in root canal treatment.

Endodontic Retreatment of a Mandibular Second Molar With a C-shaped Root Canal Configuration: A Case Report.

Root canal retreatment in mandibular second molars with C-shaped root canal configurations presents notable challenges. This article presents a case of successful root canal retreatment in a mandibular second molar exhibiting this complex configuration. Achieving a successful endodontic outcome in such cases necessitates a comprehensive understanding of the unique root canal anatomy. Moreover, the employment of advanced instruments and techniques is crucial to effectively address the intricacies of the C-shaped root canal system.

Effectiveness of tricalcium silicate-based cements: Systematic review and meta-analysis.

Introduction: Tricalcium silicate-based cements exhibit several beneficial properties for dental health and biocompatibility, which can induce biomineralisation. Objectives: To assess the sealing ability and intratubular penetration of tricalcium silicate-based sealers using warm and cold obturation techniques. Materials and Methods: An electronic search was conducted in PubMed, Scopus, and Web of Science databases for endodontically treated teeth with bioceramics and their sealing capacity in root canal obturation published up to February 2023. Results: Of the 90 articles, 16 met the inclusion criteria, and only 10 were used for the meta-analysis, of which four addressed intratubular penetration, four addressed sealing capacity, and two addressed both variables. In the sealing capacity group, the meta-analysis concluded a standardised mean difference (SMD) of -1.31 in favour of the test group (warm) with a certain nonsignificant trend (p = 0.081); regarding intratubular penetration, the meta-analysis concluded an SMD = 2.34 in favour of the test group (warm) with significantly greater penetration (p = 0.032). Conclusion: The warm obturation technique introduced significantly greater intratubular penetration than the cold technique, along with a remarkably superior sealing capacity compared to the cold technique, approaching statistical significance.

Physicochemical properties of AH plus bioceramic sealer, Bio-C Sealer, and ADseal root canal sealer.

BACKGROUND: The aim of this study was to evaluate the physicochemical properties of two newly introduced premixed calcium silicate-based root canal sealers (AH Plus Bioceramic Sealer and Bio-C Sealer) compared to a resin-based root canal sealer (ADseal root canal sealer). METHODS: Solubility, pH analysis, calcium ion release, and film thickness of each sealer were evaluated following ISO guidelines. The data were examined using the two-way ANOVA test. Furthermore, X-ray diffraction (XRD) examination was performed to investigate the crystalline phase of each type of sealer. X-ray fluorescence (XRF) analysis was done for the chemical elemental analysis of each sealer. RESULTS: The least film thickness, highest alkalinity, and highest calcium ion release were all displayed by AH Plus Bioceramic Sealer. High solubility, high alkalinity, intermediate calcium ion release, and intermediate film thickness were all displayed by Bio-C Sealer. While ADseal root canal sealer displayed the greatest film thickness, least solubility, alkalinity, and calcium ion release. CONCLUSIONS: Both AH Plus Bioceramic Sealer and Bio-C Sealer represented adequate properties to be considered a good sealer that could be used as a potential alternative to resin-based root canal sealers.

Evaluación de la filtración apical al utilizar dos selladores biocerámicos / Evaluation of apical leakage when using two bioceramic sealers

Objetivo: Evaluar con técnica de diafanización el gra-do de filtración apical al utilizar dos selladores bio-cerámicos y la técnica de cono único con taper ex vivo. Materiales y métodos: Se utilizaron 60 premola-res inferiores humanos uniradiculares extraídos. La instrumentación se realizó con lima Primary 25/.07 (WaveOne Gold, Dentsply Maillefer), según protocolo del fabricante. Se irrigó con NaOCl 2,5% y EDTAC 17%. Para la obturación, la muestra se dividió aleatoria-mente en 4 grupos (n=15). Grupo 1: Cono único y Bio C Sealer. Grupo 2: Cono único y MTA Fillapex. Grupo control negativo: no se obturó. Grupo control positi-vo: Cono único y AH Plus. En todas las muestras se aplicaron dos capas de esmalte para uñas en toda la superficie dentaria con excepción del tercio apical y del grupo control positivo, que se esmaltó en su tota-lidad. Medio de filtración: tinta china negra por difu-sión pasiva. Se diafanizó con técnica de Robertson. Se usó programa AutoCad 2022, para medir filtración en milímetros lineales. Los datos se analizaron me-diante prueba de Kruskal-Wallis seguida por compa-raciones post hoc empleando el método de Conover (p<0,05, significativo). Resultados: La filtración con Bio C Sealer, MTA Fillapex, control negativo y control positivo tuvo una media (mínimo-máximo) de 0 (0-2), 1 (0-3), 6 (2-12) y 0 (0-0); sin diferencias significativas entre Bio C Sealer y MTA Fillapex (p>0,05), ni entre Bio C Sealer y control positivo (p>0,05); pero con di-ferencias significativas entre MTA Fillapex y control positivo (p<0,05), y entre control negativo y cual-quiera de los otros tres grupos (p<0,05). Conclusión: La obturación con Bio C Sealer lograría un nivel de sellado similar al que se obtiene con el control po-sitivo; mientras que la obturación con MTA Fillapex produciría un sellado ligeramente menos efectivo que el control positivo. Sin embargo, la filtración no variaría sustancialmente entre obturaciones con Bio C Sealer y MTA Fillapex (AU)

Objective: To evaluate the degree of apical filtration with diaphanization technique, using two bioceramic sealers and single cone technique with taper, ex vivo. Materials and methods: 60 extracted single-root human mandibular premolars were used. The instrumentation was carried out with primary file 25/.07 (WaveOne Gold, Dentsply Maillefer), according to the manufacturer's protocol. Irrigation was done with 2.5% NaOCl and 17% EDTAC. For obturation, the sample was randomly divided in 4 groups (n=15). Group 1: Single cone and Bio C Sealer. Group 2: Single cone and MTA Fillapex. Negative control group: it was not obturated. Positive control group: Single cone and AH Plus. In all samples, two layers of nail polish were applied to the entire tooth surface with exception of apical third and the positive control group, which was completely glazed. Filtration medium: black Chinese ink by passive diffusion. It was diaphanized with Robertson technique. AutoCad 2022 program was used to measure filtration in linear millimeters. Data were analyzed using Kruskal-Wallis test, followed by post hoc comparisons using Conover method (p < 0.05, significant). Results: Filtration with Bio C Sealer, MTA Fillapex, negative control and positive control had a mean (minimum-maximum) of 0 (0-2), 1 (0-3), 6 (2-12) and 0 (0-0); no significant differences between Bio C Sealer and MTA Fillapex (p > 0.05), nor between Bio C Sealer and positive control (p > 0.05); but with significant differences between MTA Fillapex and positive control (p < 0.05), and between negative control and any of the other three groups (p < 0.05). Conclusion: Obturation with Bio C Sealer would achieve a level of sealing similar to obtained with the positive control; while obturation with MTA Fillapex would produce a slightly less effective seal than the positive control. However, filtration would not vary substantially between fillings with Bio C Sealer and MTA Fillapex (AU)

The effect of sealer type and obturation technique on the fracture resistance of endodontically treated roots.

OBJECTIVE: This study evaluated the effect of sealer type with various obturation techniques on the fracture resistance of root filled teeth. MATERIALS AND METHODS: Eighty mandibular premolars were collected, and root canals of 70 of them were prepared by Mtwo system up to 40/04. Thirty teeth were obturated using TotalFill BC sealer, and 30 using AH Plus sealer, with one of the obturation techniques (N = 10), namely cold lateral compaction (CLC), warm vertical compaction (WVC), and single cone (SC). Ten teeth were left without obturation as a positive control, and the other 10 teeth were not prepared serving as a negative control. Teeth were stored for 3 weeks, and the crowns were separated and the roots were subjected to fracture test using a universal testing machine. RESULTS: Data was analyzed by ANOVA followed by Tukey's test. Fracture resistance of the TotalFill groups was significantly higher than the AH Plus groups in each obturation technique, and SC had the highest fracture resistance regardless of sealer used (P < 0.05). Obturation of the root canal by TotaFill BC sealer increased the calcium/phosphorous ratio in the dentin of the root. CONCLUSIONS: Obturation with TotalFill BC sealer improved the fracture resistance of the roots more than AH Plus sealer, and obturation with SC resulted in higher fracture resistance than CLC and WVC. CLINICAL RELEVANCE: Obturation of the root canal with Bioceramic sealer with single cone obturation technique could reduce the incidence of vertical root fracture.

Evaluation of the efficacy of TruNatomy, ProTaper retreatment, and RaCe file systems in retreatment of moderately curved mandibular molars: An in vitro study.

Context: Endodontic retreatment is the first line of treatment in cases of failed primary endodontic treatment. Although associated with challenges such as incomplete removal of obturating material, increased clinical time, and extrusion of apical debris, endodontic retreatment still has considerable success rate in the general population. Aims: The aim of this study was to evaluate and compare the efficacy of TruNatomy, ProTaper retreatment, and RaCe file systems to remove the obturating material, time taken to remove the obturating material, and apical extrusion of debris using cone-beam computed tomography (CBCT). Settings and Design: In vitro study. Subjects and Methods: Forty-five moderately curved mesiobuccal roots of the mandibular molars were instrumented up to #25, 4% taper and obturated with bioceramic sealer and lateral compaction technique. Teeth were divided randomly into three groups (n = 15). Teeth were retreated with TruNatomy, ProTaper retreatment, and RaCe file systems, respectively. Preretreatment and postretreatment CBCT scans were recorded and percentage of obturating material removed was calculated. Time taken to remove the obturating material and apical extrusion of debris was noted. Statistical Analysis Used: Descriptive statistics including percentage, mean, standard deviation, Tukey's post hoc test, Kruskal-Wallis test, and Mann-Whitney Post hoc test were used. Results: The total time needed for the removal of obturating material was comparatively shorter in the RaCe group, followed by the ProTaper retreatment group and TruNatomy group (P < 0.001). TruNatomy files were significantly better in removing the obturating material than the ProTaper retreatment files (P = 0.04). Statically, no difference between RaCe and TruNatomy files was noted. Apically extruded debris was more in the TruNatomy group than in the RaCe and ProTaper retreatment groups (P = 0.01). Conclusions: All tested endodontic files were effective in removal of obturating material, although none could completely remove the filling material and no system could completely eliminate apical extrusion.

Effect of Dentine Conditioning with Silver Diamine Fluoride on Wettability of Root Canal Sealers.

OBJECTIVE: To test the null hypothesis that dentine treatment with silver diamine fluoride (SDF), a potent antimicrobial agent, following use of proteolytic and chelating agents does not influence the wettability of an epoxy resin (AH Plus, Dentsply Sirona, Charlotte, NC, USA) and a tricalcium silicate sealer (BioRoot RCS, Septodont, Saint-Maur-des-Fossés, France). METHODS: Seventy-two intraradicular dentine specimens were divided into six groups based on the final irrigation solutions used: 2.5% sodium hypochlorite (NaOCl) and 17% ethylenediaminetetraacetic acid (EDTA) (NaOCl-EDTA) (group 1); NaOCl-EDTA-NaOCl (group 2); NaOCl-EDTA followed by 3.8% SDF, NaOCl-EDTA-SDF (group 3); NaOCl-EDTA-NaOCl-SDF (group 4); SDF (group 5) and saline (group 6). After irrigation, the specimens were divided into subgroups according to the sealer used, AH Plus or BioRoot RCS. Contact angles were measured using a contact angle analyser. The data were analysed using an independent t test, one-way analysis of variance (ANOVA) and Tamhane T2 post hoc test, with the level of significance set at P < 0.05. RESULTS: In the epoxy resin sealer group, dentine surfaces treated with only SDF showed the lowest contact angle. This was significantly less than the groups in which NaOCl was used as the final irrigant (P < 0.05). In the tricalcium silicate-based sealer group, the groups treated with SDF showed significantly greater contact angles when compared to the control group (P < 0.05). CONCLUSION: It was concluded that SDF conditioning of dentine favours the wettability of epoxy resin sealer but is detrimental to the wettability of tricalcium silicate sealer.

A Systematic Review on Comparison of Periapical Healing and Post-Operative Pain between Bioceramic and Epoxy Resin Based Sealers.

To compare the incidence of postoperative discomfort and periapical healing in endodontically treated teeth following the use of resin-based or bioceramic sealers. In vivo, clinical trials were included in the study. The selection criteria, data extraction, and analysis were performed to evaluate the quality and publication bias of the selected studies. The primary outcome measure was the comparison of postoperative discomfort between the two sealer types. Seven studies were included in the systematic review, with a modest level of evidence found in the quality assessment. There are no significant differences in the postoperative discomfort levels between resin-based and bioceramic sealers. However, the overall quality of the clinical trials was moderate, highlighting the need for further well-designed clinical trials with appropriate measures of randomization, allocation concealment, and blinding to establish a definitive conclusion on the incidence of Postoperative discomfort associated with the use of these sealers.

A confocal laser scanning microscopic evaluation of nonthermal atmospheric plasma on the dentinal tubule penetration of bioceramic and epoxy resin-based root canal sealers.

Aim: Using confocal laser scanning microscopy (CLSM), the current study assessed the impact of nonthermal atmospheric plasma (NTAP) on the dentinal tubule penetration of bioceramic and epoxy resin-based root canal sealers (CLSM). Materials and Methods: Forty human mandibular premolar teeth with a single root that had just undergone extraction were chosen and biomechanical preparation of root canals was done with ProTaper Gold rotary Nickel-titanium instruments. Samples were divided into four groups (n = 10). Group 1: Bioceramic sealer (BioRoot RCS); Group 2: Epoxy resin-based sealer (AH Plus) without application of NTAP; Group 3: Bioceramic sealer (BioRoot RCS); and Group 4: Epoxy resin-based sealer (AH Plus) with the application of NTAP for 30 s. In Groups 3 and 4, all of the samples underwent obturation with the appropriate sealers following NTAP application. For determination of the sealer's dentinal tubule penetration values, slices with a thickness of 2 mm were taken from the middle third of sample's root and examined using CLSM. The acquired data were statistically analyzed with one-way analysis of variance and the Post hoc Tukey's test. The cutoff for statistical significance was P < 0.05. Results: In comparison to other groups, the maximum sealer penetration values into dentinal tubules were significantly higher in Group 3 for Bioceramic sealer with NTAP application and Group 4 for Epoxy resin-based sealer with NTAP application. Conclusion: NTAP application increased the dentinal tubule penetration of bioceramic and epoxy resin-based sealers in comparison to groups without NTAP application.

Comparison sealing ability in three bioceramic sealers applied in hydraulic condensation technique by using micro-computed tomography.

Background/purpose: Sealing ability in root canal obturation has always been a key concern for endodontic success. The purpose of this study was to analyze the percentage of voids in root canal space obturated by using single cone hydraulic condensation with different root canal sealers and to compare those with AH Plus sealer. Materials and methods: Experiments were conducted using twenty 3D-printed upper first premolars. After the buccal root canals were prepared using Ni-Ti rotary instruments, the teeth were divided into four groups: the AH Plus, BC sealer, BC sealer HiFlow, and Endoseal MTA groups. All buccal canals were obturated by single-cone hydraulic condensation. All specimens were scanned using micro-computed tomography and the percentage volume of the voids inside and outside the filled materials (Vin and Vout) at three different canal depth intervals were calculated by a Bruker micro-CT software. Differences according to root canal sealers were evaluated statistically using the Kruskal-Wallis test and the Wilcoxon Rank Sum test at a significance level of 0.05. Results: The results indicated that most of the voids were presented near the interface (Vout), the Vin is very small and not significant different between groups. The Vout decreased in the following order: AH Plus(1.837% ± 1.226%)≅BC sealer (1.225% ± 0.836%)>BC sealer Hiflow(0.349% ± 0.071%)>Endoseal MTA(0.203% ± 0.049%). Conclusion: For the percentage volume of voids between the root canal filling material and root canal surface, though the BC sealer Hiflow is slightly larger than Endoseal MTA, which is still much less than BC sealer and AH Plus.

Effect of continuous chelation on the dentinal tubule penetration of a calcium silicate-based root canal sealer: a confocal laser microscopy study.

BACKGROUND: This study aimed to evaluate the effect of various irrigation protocols on the penetration depth of a calcium silicate-based sealer into dentinal tubules using confocal laser scanning microscopy (CLSM). METHODS: Twenty single-rooted mandibular premolars were endodontically prepared and divided into the following two groups according to the irrigation protocol used (n = 10): Group I: NaOCl + EDTA and Group II: continuous chelation (NaOCl/Dual Rinse). Obturation was performed with the warm vertical compaction technique using TotalFill HiFlow bioceramic sealer mixed with a fluorophore dye. Samples were observed using CLSM at 10× to measure the percentage of sealer penetration and its maximum depth into the dentinal tubules. Data were analysed using one-way ANOVA followed by Tukey's post-hoc test. The significance level was set at p < 0.05 within all tests. RESULTS: Comparing the overall results of all sections tested, no statistically significant differences existed between the groups regarding the percentage of sealer penetration (p = 0.612) and maximum depth of penetration (p > 0.05). CONCLUSIONS: With both types of irrigation used, dentinal tubule penetration was higher in the coronal section than in the apical section. Continuous chelation using NaOCl/Dual Rinse HEDP performed better in the coronal segments, while irrigation using NaOCl + EDTA promoted a higher percentage of sealer penetration in the apical segment.