Establishment of a rapid detection method for Mycoplasma pneumoniae based on RPA-CRISPR-Cas12a technology.

Mycoplasma pneumoniae can cause respiratory infections and pneumonia, posing a serious threat to the health of children and adolescents. Early diagnosis of Mycoplasma pneumoniae infection is crucial for clinical treatment. Currently, diagnostic methods for Mycoplasma pneumoniae infection include pathogen detection, molecular biology techniques, and bacterial culture, all of which have certain limitations. Here, we developed a rapid, simple, and accurate detection method for Mycoplasma pneumoniae that does not rely on large equipment or complex operations. This technology combines the CRISPR-Cas12a system with recombinase polymerase amplification (RPA), allowing the detection results to be observed through fluorescence curves and immunochromatographic lateral flow strips.It has been validated that RPA-CRISPR/Cas12a fluorescence analysis and RPA-CRISPR/Cas12-immunochromatographic exhibit no cross-reactivity with other common pathogens, and The established detection limit was ascertained to be as low as 102 copies/µL.Additionally, 49 clinical samples were tested and compared with fluorescence quantitative polymerase chain reaction, demonstrating a sensitivity and specificity of 100%. This platform exhibits promising clinical performance and holds significant potential for clinical application, particularly in settings with limited resources, such as clinical care points or resource-constrained areas.

Electrochemical detection of MMP-2 with enhanced sensitivity: Utilizing T7 RNA polymerase and CRISPR-Cas12a for neuronal studies.

This study introduces a novel electrochemical biosensor for detecting Matrix Metalloproteinase-2 (MMP-2), a key biomarker in cancer diagnostics and tissue remodeling. The biosensor is based on a dual-amplification strategy utilizing T7 RNA polymerase isothermal amplification and CRISPR-Cas12a technology. The principle involves the release of a DNA template in the presence of MMP-2, leading to RNA synthesis by T7 RNA polymerase. This RNA activates CRISPR-Cas12a, which cleaves a DNA probe on the electrode surface, resulting in a measurable electrochemical signal.The biosensor demonstrated exceptional sensitivity, with a detection limit of 2.62 fM for MMP-2. This high sensitivity was achieved through the combination of transcriptional amplification and the collateral cleavage activity of CRISPR-Cas12a, which amplifies the signal. The sensor was able to detect MMP-2 across a wide dynamic range from 2 fM to 1 nM, showing a strong linear correlation between MMP-2 concentration and the electrochemical signal. In practical applications, the biosensor accurately detected elevated levels of MMP-2 in cell culture supernatants from HepG2 liver cancer cells, distinguishing them from normal LO2 liver cells. The use of an MMP-2 inhibitor confirmed the specificity of the detection. These results underscore the biosensor's potential for clinical diagnostics, particularly in early cancer detection and monitoring of tissue remodeling activities. The biosensor's design allows for rapid, point-of-care testing without the need for complex laboratory equipment, making it a promising tool for personalized healthcare and diagnostic applications.

Raman-enhanced sensor based on CRISPR-SERS technology for the rapid and hypersensitive detection of Mycobacterium tuberculosis.

Tuberculosis is a highly infectious disease caused by the bacterium Mycobacterium tuberculosis, and the spread of this agent has caused serious health problems worldwide. The rapid and accurate detection of M. tuberculosis is essential for controlling the spread of infection and for preventing the emergence of multidrug-resistant strains. In this study, the powerful trans-cleavage ability of CRISPR-Cas12a for ssDNA was combined with a surface-enhanced Raman spectroscopy (SERS)-based strategy to establish a CRISPR-SERS sensor for the hypersensitive detection of M. tuberculosis DNA. We observed a linear relationship between the concentration of M. tuberculosis DNA and the output signal over the range of 5 to 100 pM. The equation describing the standard curve was y = 24.10x + 1594, with R2 = 0.9914. The limit of detection was as low as 4.42 pM for genomic DNA, and a plasmid containing an M. tuberculosis-specific sequence was detected at 5 copy/µL. A detection accuracy of 100% was achieved in the analysis of DNA isolated from the sputum of hospitalized patients with tuberculosis. The entire detection process is simple to deploy and only takes 50 min and results in the sensitive and specific detection of M. tuberculosis DNA. This study provides a new method for the detection of tuberculosis. The tool is stable and can be utilized on-site, and it thus broadens the diagnostic application of CRISPR-Cas12a-based sensor technology.

Advanced Electrochemical Biosensing toward Staphylococcus aureus Based on the RPA-CRISPR/Cas12a System and Conductive Nanocomposite.

Staphylococcus aureus (S. aureus) is a prevalent foodborne pathogen that poses significant challenges to food safety. Herein, a sensitive and specific electrochemical biosensor based on RPA-CRISPR/Cas12a is developed for evaluating S. aureus. In the presence of S. aureus, the extracted target DNA fragments are efficiently amplified by recombinase polymerase amplification (RPA). The designed crRNA, binding to Cas12a, effectively recognizes the target fragment cleaving hpDNA. The signal molecule of hpDNA is cleaved from the sensing interface, resulting in a reduction of current response. Under optimal experimental conditions, the developed electrochemical biosensor exhibits remarkable sensitivity in detecting S. aureus. The linear range for quantifying S. aureus in pure culture is 1.04 × 101-1.04 × 108 CFU/mL, with a detection limit as low as 3 CFU/mL. In addition, the biosensor enables the accurate and sensitive detection of S. aureus in milk within a linear range of 1.07 × 101-1.07 × 107 CFU/mL. The electrochemical biosensor enhances anti-interference capability owing to the specific amplification of RPA primers and the single-base recognition ability of crRNA. The RPA-CRISPR/Cas12a biosensor exhibits exceptional anti-interference capability, precision, and sensitivity, thereby establishing a robust foundation for real-time monitoring of microbial contamination.

A Triple-Mismatch Differentiating assay exploiting activation and trans cleavage of CRISPR-Cas12a for mutation detection with ultra specificity and sensitivity.

Liquid biopsy technology is non-invasive and convenient, and is currently an emerging technology for cancer screening. Among them, clustered regularly interspaced short palindromic repeats (CRISPR)-CRISPR associated protein 12a (Cas12a) based nucleic acid detection technology has the advantages of high sensitivity, rapidity, and easy operation. However, CRISPR-Cas12a does not discriminate single-base mismatches of targets well enough to meet the needs of clinical detection. Herein, we developed the Triple-Mismatch Differentiating (TMD) assay. This assay amplified the small thermodynamic difference in mismatches at one site at the level of CRISPR-Cas12a activation to a significant thermodynamic difference at three sites at both the level of CRISPR-Cas12a activation and trans-cleavage, which greatly improves the ability of CRISPR-Cas12a to discriminate between base mismatches. Our manipulation greatly improved the specificity of the CRISPR-Cas12a system while maintaining its inherent sensitivity and simplicity, increasing the detection limit to 0.0001%. When testing samples from pancreatic cancer patients, our results were highly consistent with NGS sequencing results. We believe that the TMD assay will provide a new technology for early cancer detection and will be widely used in the clinical practice.

A rapid visualization method for detecting rotavirus A by combining nuclear acid sequence-based amplification with the CRISPR-Cas12a assay.

Introduction. Rotavirus A is the most common pathogen causing diarrhoea in children less than 5 years, leading to severe complications such as dehydration, electrolyte imbalances, acidosis, myocarditis, convulsions, pneumonia, and other life-threatening conditions.Gap statement. There is an urgent need for a rapid and efficient nucleic acid detection strategy to enable early diagnosis and treatment, preventing rotavirus transmission and associated complications.Aim. This article aimed to develop a nuclear acid sequence-based amplification (NASBA)-Cas12a system for detecting rotavirus A using fluorescence intensity or lateral flow strips.Methodology. The NASBA technology was combined with the clustered regularly interspaced short palindromic repeats-Cas12a system to establish a NASBA-Cas12a system for detecting rotavirus A.Results. The NASBA-Cas12a system could detect rotavirus A at 37 ℃ within 70 min and had no cross-reactivity with other viruses, achieving a limit of detection of 1.2 copies µl-1. This system demonstrated a sensitivity of 100%, specificity of 90%, positive predictive value of 97.22% and negative predictive value of 100%. The kappa value was 0.933, indicating that the NASBA-Cas12a system was highly consistent with reverse transcription-PCR.Conclusion. The NASBA-Cas12a system exhibited high sensitivity and specificity for detecting rotavirus A, showing great potential for clinical application.

An Optimized CRISPR/Cas12a Assay to Facilitate the BRAF V600E Mutation Detection.

BACKGROUND: Accurate detection of the BRAF V600E (1799T > A) mutation status can significantly contribute to selecting an optimal therapeutic strategy for diverse cancer types. CRISPR-based diagnostic platforms exhibit simple programming, cost-effectiveness, high sensitivity, and high specificity in detecting target sequences. The goal of this study is to develop a simple BRAF V600E mutation detection method. METHODS: We combined the CRISPR/Cas12a system with recombinase polymerase amplification (RPA). Subsequently, several parameters related to CRISPR/Cas12a reaction efficiency were evaluated. Then, we conducted a comparative analysis of three distinct approaches toward identifying BRAF V600E mutations in the clinical samples. RESULTS: Our data suggest that CRISPR/Cas detection is considerably responsive to variations in buffer conditions. Magnesium acetate (MgOAc) demonstrated superior performance compared to all other examined additive salts. It was observed using 150 nM guide RNA (gRNA) in an optimized reaction buffer containing 14 mM MgOAc, coupled with a reduction in the volumes of PCR and RPA products to 1 µL and 3 µL, respectively, resulted in an enhanced sensitivity. Detection time was decreased to 75 min with a 2% limit of detection (LOD), as evidenced by the results obtained from the blue light illuminator. The CRISPR/Cas12a assay confirmed the real-time PCR results in 31 of 32 clinical samples to identify the BRAF V600E mutation status, while Sanger sequencing detected BRAF V600E mutations with lower sensitivity. CONCLUSION: We propose a potential diagnostic approach that is facile, fast, and affordable with high fidelity. This method can detect BRAF V600E mutation with a 2% LOD without the need for a thermocycler.

Detection of biological loads in sewage using the automated robot-driven photoelectrochemical biosensing platform.

Real-time polymerase chain reaction (RT-PCR) remains the most prevalent molecular detection technology for sewage analysis but is plagued with numerous disadvantages, such as time consumption, high manpower requirements, and susceptibility to false negatives. In this study, an automated robot-driven photoelectrochemical (PEC) biosensing platform is constructed, that utilizes the CRISPR/Cas12a system to achieve fast, ultrasensitive, high specificity detection of biological loads in sewage. The Shennong-1 robot integrates several functional modules, involving sewage sampling and pretreatment to streamline the sewage monitoring. A screen-printed electrode is employed with a vertical graphene-based working electrode and enhanced with surface-deposited Au nanoparticles (NPs). CdTe/ZnS quantum dots (QDs) are further fabricated through the double-stranded DNA (dsDNA) anchored on Au NPs. Using the cDNA template of Omicron BA.5 spike gene as a model, the PEC biosensor demonstrates excellent analytical performance, with a lower detection limit of 2.93 × 102 zm and an outstanding selectivity at the level of single-base mutation recognition. Furthermore, the rapid, accurate detection of BA.5 in sewage demonstrates the feasibility of the PEC platform for sewage monitoring. In conclusion, this platform allows early detection and tracking of infectious disease outbreaks, providing timely data support for public health institutions to take appropriate prevention and control measures.

Detection of the jellyfish Chrysaora pacifica by RPA-CRISPR-Cas12a environmental DNA (eDNA) assay and its evaluation through field validation and comparative eDNA analyses.

Climate-driven environmental changes and anthropogenic activities can result in the proliferation of non-indigenous aquatic species such as jellyfish that may cause envenomation and various ecological disruptions. Here we developed a two-step RPA-CRISPR-Cas12a eDNA assay, consisting of target eDNA amplification followed by a CRISPR-Cas12 reaction, for the early detection of Chrysaora pacifica, a jellyfish species often considered non-indigenous to South Korea. The assay demonstrated high sensitivity, with a detection limit of two copies COI/µL for eDNA derived from C. pacifica, using target specific RPA primers and crRNA sequences. Field validation of the assay using eDNA samples from Jinhae Bay collected over eight months of time-series monitoring, revealed temporal distribution of the jellyfish which correlated with results of digital polymerase chain reaction (dPCR) and eDNA metabarcoding. The C. pacifica eDNA assays were also corroborated (R-square 0.7891) by reports from a citizen science-based jellyfish-monitoring program operated by the National Institute of Fisheries Science, South Korea. Our RPA-CRISPR-Cas eDNA assay can therefore, be an efficient alternative to traditional tools for the early detection of outbreaks of non-indigenous or harmful species in marine ecosystems.

Development of an RPA-CRISPR/Cas12a Assay for Rapid and Sensitive Diagnosis of Plant Quarantine Fungus Setophoma terrestris.

Setophoma terrestris is an important phytopathogenic fungus listed by China as a harmful fungus subject to phytosanitary import control. This pathogen is a threat to a wide range of plants, particularly as the causal agent of onion pink root rot, one of the most severe diseases of onions. In order to provide rapid identification and early warning of S. terrestris and prevent its spread, we have developed a rapid, accurate, and visually intuitive diagnostic assay for this pathogen, by utilizing recombinase polymerase amplification (RPA), coupled with CRISPR/Cas12a cleavage and fluorescence-based detection systems or paper-based lateral flow strips. The developed RPA-CRISPR/Cas12a assay exhibited remarkable specificity for the detection of S. terrestris. Moreover, this protocol can detect the pathogen at a sensitivity level of 0.01 pg/µL, which significantly outperforms the 1 pg/µL sensitivity achieved by the existing qPCR-based detection method. The entire diagnostic procedure, including DNA extraction, the RPA reaction, the Cas12a cleavage, and the result interpretation, can be accomplished in 40 min. Furthermore, the successful application of the assay in infected plant samples highlighted its potential for rapid and accurate pathogen detection in agricultural settings. In summary, this RPA-CRISPR/Cas12a diagnostic method offers a potentially valuable technological solution for quarantine and disease management.

Rapid and Ultrasensitive Detection of H. aduncum via the RPA-CRISPR/Cas12a Platform.

Hysterothylacium aduncum is one of six pathogens responsible for human anisakiasis. Infection with H. aduncum can cause acute abdominal symptoms and allergic reactions and is prone to misdiagnosis in clinical practice. This study aims to enhance the efficiency and accuracy of detecting H. aduncum in food ingredients. We targeted the internal transcribed spacer 1 (ITS 1) regions of Anisakis to develop a visual screening method for detecting H. aduncum using recombinase polymerase amplification (RPA) combined with the CRISPR/Cas12a system. By comparing the ITS 1 region sequences of eight nematode species, we designed specific primers and CRISPR RNA (crRNA). The specificity of RPA primers was screened and evaluated, and the CRISPR system was optimized. We assessed its specificity and sensitivity and performed testing on commercial samples. The results indicated that the alternative primer ADU 1 was the most effective. The final optimized concentrations were 250 nM for Cas12a, 500 nM for crRNA, and 500 nM for ssDNA. The complete test procedure was achievable within 45 min at 37 °C, with a limit of detection (LOD) of 1.27 pg/µL. The amplified product could be directly observed using a fluorescence microscope or ultraviolet lamp. Detection results for 15 Anisakis samples were entirely consistent with those obtained via Sanger sequencing, demonstrating the higher efficacy of this method for detecting and identifying H. aduncum. This visual detection method, characterized by simple operation, visual results, high sensitivity, and specificity, meets the requirements for food safety testing and enhances monitoring efficiency.

Detection of Porcine Circovirus (PCV) Using CRISPR-Cas12a/13a Coupled with Isothermal Amplification.

The impact of porcine circovirus (PCV) on the worldwide pig industry is profound, leading to notable economic losses. Early and prompt identification of PCV is essential in managing and controlling this disease effectively. A range of detection techniques for PCV have been developed and primarily divided into two categories focusing on nucleic acid or serum antibody identification. The methodologies encompass conventional polymerase chain reaction (PCR), real-time fluorescence quantitative PCR (qPCR), fluorescence in situ hybridization (FISH), loop-mediated isothermal amplification (LAMP), immunofluorescence assay (IFA), immunohistochemistry (IHC), and enzyme-linked immunosorbent assay (ELISA). Despite their efficacy, these techniques are often impeded by the necessity for substantial investment in equipment, specialized knowledge, and intricate procedural steps, which complicate their application in real-time field detections. To surmount these challenges, a sensitive, rapid, and specific PCV detection method using Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-Cas12a/13a coupled with isothermal amplification, such as enzymatic recombinase amplification (ERA), recombinase polymerase amplification (RPA), and loop-mediated isothermal amplification (LAMP), has been developed. This novel method has undergone meticulous optimization for detecting PCV types 2, 3, and 4, boasting a remarkable sensitivity to identify a single copy per microliter. The specificity of this technique is exemplary, with no observable interaction with other porcine viruses such as PEDV, PRRSV, PRV, and CSFV. Its reliability has been validated with clinical samples, where it produced a perfect alignment with qPCR findings, showcasing a 100% coincidence rate. The elegance of merging CRISPR-Cas technology with isothermal amplification assays lies in its on-site testing without the need for expensive tools or trained personnel, rendering it exceptionally suitable for on-site applications, especially in resource-constrained swine farming environments. This review assesses and compares the process and characteristics inherent in the utilization of ERA/LAMP/RPA-CRISPR-Cas12a/Cas13a methodologies for the detection of PCV, providing critical insights into their practicality and effectiveness.

Emerging gene editing in industrial microbiology beyond CRISPR-Cas9.

The CRISPR-Cas9 system has been widely applied for industrial microbiology but is not effective in certain microorganisms. This forum explores the strategies aimed at overcoming these challenges, including the use of the Cas12a system, Cas9 variants, and non-CRISPR techniques, to provide more effective strategies for expanding applications in microbial engineering.

RAA-CRISPR/Cas12a-Mediated Rapid, Sensitive, and Onsite Detection of Newcastle Disease in Pigeons.

Pigeon Newcastle disease, caused by pigeon paramyxovirus type 1 (PPMV-1), is a significant infectious disease in pigeons that can result in substantial mortality and poses a severe threat to the pigeon industry. The rapid and accurate onsite diagnosis of pigeon disease is crucial for timely diagnosis and the implementation of effective prevention and control measures. In this study, we established a rapid detection method for PPMV-1 based on recombinase-aided amplification (RAA) and CRISPR/Cas12a. The RAA primers target the conserved regions of the L gene for preamplification in clinical nucleic acid samples, followed by CRISPR/Cas12a detection of the target gene. Visualization could be achieved by combination with a lateral flow dipstick (LFD). This method demonstrated high specificity, showing no cross-reactivity with non-PPMV-1 samples. The sensitivity of the method assessed by fluorescence analysis reached 100 copies/µL, and when it was combined with an LFD, the sensitivity was 103 copies/µL. The constructed RAA-CRISPR/Cas12a-LFD visual detection method was applied to clinical sample testing and was found to enable the rapid and accurate detection of swab samples and tissue specimens. Its sensitivity was consistent with the current gold standard, quantitative real-time PCR results. The RAA-CRISPR/Cas12a-LFD detection method we developed provides a novel approach for the rapid, simple, precise, and specific onsite diagnosis of pigeon Newcastle disease.

Terminal deoxynucleotidyl transferase-mediated CRISPR sensing platform for simple and point-of-care detection of cobalt pollution.

The excessive use of cobalt in various chemical industries and arbitrary discharge of industrial wastewater have led to increased cobalt pollution in soil and water resources, increasing the risk of human exposure to high concentrations of cobalt and necessitating an urgent need for on-site monitoring platform for cobalt pollution. In this study, the terminal deoxynucleotidyl transferase (TdT)-CRISPR platform has been developed. In this platform, cobalt as a cofactor of TdT, can significantly improve the tailing efficiency of TdT-mediated extension. Therefore, when cobalt is present, the detection probe can be extended with poly(T) tails through the TdT-mediated extension, which can be subsequently served as the DNA activator for Cas12a, leading to the cleavage of fluorescence reporter molecules and triggering turn-on fluorescence signals. Consequently, this dual amplification sensing strategy of TdT-CRISPR platform demonstrated exceptional sensitivity (0.83 nM) and high specificity for cobalt over other ions. Furthermore, the method was successfully employed for the detection of cobalt in tap water and river samples. CRISPR-lateral flow assays (CRISPR-LFAs) were evaluated in this study for the simple and point-of-care detection of cobalt pollution. The assays are capable of detecting cobalt concentrations as low as 50 nM, which is significantly lower than the environmental standards of 16.9 µM, through strip analysis with the naked eye. These results commonly suggest that the TdT-CRISPR platform holds significant promise for monitoring cobalt pollution, providing a robust and sensitive solution for on-site detection and contributing to the mitigation of cobalt contamination risks in environmental matrices.

Co-freezing localized CRISPR-Cas12a system enables rapid and sensitive nucleic acid analysis.

Rapid and sensitive nucleic acid detection is vital in disease diagnosis and therapeutic assessment. Herein, we propose a co-freezing localized CRISPR-Cas12a (CL-Cas12a) strategy for sensitive nucleic acid detection. The CL-Cas12a was obtained through a 15-minute co-freezing process, allowing the Cas12a/crRNA complex and hairpin reporter confined on the AuNPs surface with high load efficiency, for rapid sensing of nucleic acid with superior performance to other localized Cas12a strategies. This CL-Cas12a based platform could quantitatively detect targets down to 98 aM in 30 min with excellent specificity. Furthermore, the CL-Cas12a successful applied to detect human papillomavirus infection and human lung cancer-associated single-nucleotide mutations. We also achieved powerful signal amplification for imaging Survivin mRNA in living cells. These findings highlight the potential of CL-Cas12a as an effective tool for nucleic acid diagnostics and disease monitoring.

An efficient CRISPR-Cas12a-mediated MicroRNA knockout strategy in plants.

In recent years, the CRISPR-Cas9 nuclease has been used to knock out MicroRNA (miRNA) genes in plants, greatly promoting the study of miRNA function. However, due to its propensity for generating small insertions and deletions, Cas9 is not well-suited for achieving a complete knockout of miRNA genes. By contrast, CRISPR-Cas12a nuclease generates larger deletions, which could significantly disrupt the secondary structure of pre-miRNA and prevent the production of mature miRNAs. Through the case study of OsMIR390 in rice, we confirmed that Cas12a is a more efficient tool than Cas9 in generating knockout mutants of a miRNA gene. To further demonstrate CRISPR-Cas12a-mediated knockout of miRNA genes in rice, we targeted nine OsMIRNA genes that have different spaciotemporal expression and have not been previously investigated via genetic knockout approaches. With CRISPR-Cas12a, up to 100% genome editing efficiency was observed at these miRNA loci. The resulting larger deletions suggest Cas12a robustly generated null alleles of miRNA genes. Transcriptome profiling of the miRNA mutants, as well as phenotypic analysis of the rice grains revealed the function of these miRNAs in controlling gene expression and regulating grain quality and seed development. This study established CRISPR-Cas12a as an efficient tool for genetic knockout of miRNA genes in plants.

Establishment of a platform based on dual RPA combined with CRISPR/Cas12a for the detection of Klebsiella pneumoniae and its KPC resistance gene.

Carbapenem resistant Klebsiella pneumoniae (CRKP) can cause serious hospital- and community-acquired infections. Treatment for CRKP infection is limited, resulting in prolonged hospitalization and high consultation costs. The KPC genotype has the highest detection rate of CRKP, and its mortality rate is higher than the overall mortality rate of CRKP. However, traditional testing methods have disadvantages such as long time and reliance on complex and sophisticated instruments, which are not conducive to rapid screening for CRKP. Therefore, this study aimed to establish a detection platform for early screening of CRKP so that effective antimicrobial therapy could be administered promptly to prevent the widespread spread of CRKP. We integrated dual RPA with CRISPR/Cas12a to establish a dual platform for the detection of K. pneumoniae (Kp) rcsA-specific gene and KPC resistance gene. Four result reading methods were established, including fluorescence detection (FD), blue light irradiation detection (BLID), ultraviolet irradiation detection (UID), and lateral flow test strips (LFTS). For the rcsA gene, the LOD of FD was 1 × 10 pg/µL, and the other three methods could detect 1 × 101 pg/µL of bacterial DNA. As for the KPC gene, four resultant readout methods were able to detect 1 × 102 pg/µL of bacterial DNA. In 59 clinical strains tested, the dual RPA-CRISPR/Cas12a detection of the rcsA had 100% sensitivity, specificity, and accuracy compared to the culture method. Compared with the drug sensitivity test, the sensitivity of dual RPA-CRISPR/Cas12a detection for the KPC was 85.71%, the specificity was 100%, and the accuracy was 94.92%. In summary, our dual RPA-CRISPR/Cas12a platform proved to be rapid, precise, and convenient for the efficient detection of Kp with KPC in the laboratory or at the point of care.

One-Pot Assay for Rapid Detection of Stenotrophomonas maltophilia by RPA-CRISPR/Cas12a.

Stenotrophomonas maltophilia (S. maltophilia, SMA) is a common opportunistic pathogen that poses a serious threat to the food industry and human health. Traditional detection methods for SMA are time-consuming, have low detection rates, require complex and expensive equipment and professional technical personnel for operation, and are unsuitable for on-site detection. Therefore, establishing an efficient on-site detection method has great significance in formulating appropriate treatment strategies and ensuring food safety. In the present study, a rapid one-pot detection method was established for SMA using a combination of Recombinase Polymerase Amplification (RPA) and CRISPR/Cas12a, referred to as ORCas12a-SMA (one-pot RPA-CRISPR/Cas12a platform). In the ORCas12a-SMA detection method, all components were added into a single tube simultaneously to achieve one-pot detection and address the problems of nucleic acid cross-contamination and reduced sensitivity caused by frequent cap opening during stepwise detection. The ORCas12a-SMA method could detect at least 3 × 10° copies·µL-1 of SMA genomic DNA within 30 min at 37 °C. Additionally, this method exhibited sensitivity compared to the typical two-step RPA-CRISPR/Cas12a method. Overall, the ORCas12a-SMA detection offered the advantages of rapidity, simplicity, high sensitivity and specificity, and decreased need for complex large-scale instrumentation. This assay is the first application of the one-pot platform based on the combination of RPA and CRISPR/Cas12a in SMA detection and is highly suitable for point-of-care testing. It helps reduce losses in the food industry and provides assistance in formulating timely and appropriate antimicrobial treatment plans.

An ultra-sensitive suboptimal protospacer adjacent motif enhanced rolling circle amplification assay based on CRISPR/Cas12a for detection of miR-183.

Introduction: MicroRNAs (miRNAs) have been recognized as promising diagnostic biomarkers for Diabetic Retinopathy (DR) due to their notable upregulation in individuals with the condition. However, the development of highly sensitive miRNAs assays for the rapid diagnosis of DR in clinical settings remains a challenging task. Methods: In this study, we introduce an enhanced CRISPR/Cas12a assay, leveraging suboptimal PAM (sPAM)-mediated Cas12a trans-cleavage in conjunction with rolling circle amplification (RCA). sPAM was found to perform better than canonical PAM (cPAM) in the detection of Cas12a-mediated ssDNA detection at low concentrations and was used instead of canonical PAM (cPAM) to mediate the detection. The parameters of reactions have also been optimized. Results and discussion: In comparison with cPAM, sPAM has higher sensitivity in the detection of ssDNA at concentrations lower than 10 pM by Cas12a. By replacing cPAM with sPAM in the padlock template of RCA, ultra-high sensitivity for miR-183 detection is achieved, with a detection limit of 0.40 aM. within 25 min and a linear range spanning from 1 aM. to 1 pM. Our assay also exhibits exceptional specificity in detecting miR-183 from other miRNAs. Furthermore, the applicability of our assay for the sensitive detection of miR-183 in clinical serum samples is also validated. This study introduces a groundbreaking assay with excellent performance through a simple modification, which not only addresses existing diagnostic challenges, but also opens exciting new avenues for clinical diagnosis in the realm of DR.